TS3212 Itunes won't open. After installing it, It wont open. It only comes up with an itunes software licence agreement then it disaperes and nothing happends? any sujestion will be greatly apreciated.

Itunes wont open. After installing it, It wont open. It only comes up with an itunes software licence agreement then it disaperes and nothing happends? any sujestion will be greatly apreciated.

hi Shaun!
after installing the update for iTunes, it doesn't run (comp makes noises but nothing comes up on screen). when i open task manager itunes is running as a process, but i can't end process.
hmmm. okay, Norton is still our prime suspect here. that "running itunes.exe process that will not die" symptom is associated with the nastier versions of the NIS 2005 launch suppression problems. (people who get that also often see things like looooooong sloooooow shutdown times on the PCs and odd end program dialog boxes.)
let's try throwing the trusty Lorraine M technique at the beast. (it usually fixes the nastier versions of the NIS 2005 problems.)
Lorraine M: NIS/itunes problem rectified
love, b

Similar Messages

  • 'iTunes Software Licence Agreement' every time I open iTunes

    Since the most recent iTunes update, I'm getting the 'iTunes Software Licence Agreement' window every time I open iTunes (screenshot - http://img508.imageshack.us/img508/5265/68707078.png) -- to which I have to select 'agree' to access normally.
    Why? And anyway to stop this?
    Thanks in advance.

    *Replying to Gareth L*
    Though on my own account, its still comming up with the "set up" screens before it starts.. any other ideas i could try?
    iTunes setup assistant runs every time you launch, user-account-specific issue ... I think your other set of iTunes preference files (in your normal user account) might be damaged, Gareth. (Have experimented with this on my XP PC ... rebuild one set and the license agreement runs, rebuild the other set and the iTunes Setup assistant runs. So damage to the 'other" set might be causing your relentless-setup-assistant thing.)
    So, we'll try swapping out your other set of pref files. Here's Windows 7 instructions. Make a note of any custom preferences you have set up, because this procedure will return everything to default that wasn't returned to default by rebuilding the other set. You might also have to reinstall any third-party iTunes add-ons/plug-ins after doing this one, too.
    Here's Windows 7 instructions for rebuilding "the other set" *(Step 10* contains the crucial difference from the license-agreement-problem instructions).
    First, quit iTunes if you have it open.
    Next, you'll need to make sure you are set up to view hidden files and folders in Vista (or 7).
    1. From the Start menu, click Open.
    2. In the Organize menu, click Folder and Search Options.
    3. Click the View tab.
    4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected.
    5. Click OK.
    Next, you'll remove the iTunes preference folder (and contained file).
    6. In Computer, open Local Disk: C or whichever drive your documents are stored on.
    7. Open the Users folder.
    8. Open the folder with the name of the Vista (or 7) user account in which iTunes always shows the setup assistant in when launching.
    9. Open the AppData folder.
    10. Open the Roaming folder.
    11. Open the Apple Computer folder.
    12. Drag the iTunes folder out onto the Desktop.
    Now you'll rebuild the preference folder and file.
    13. Launch iTunes. This will cause iTunes to rebuild that preference folder and file. *The setup assistant will appear for you again.* (That is expected behavior when that particular preference folder and contained file are being rebuilt.)
    14. Now quit iTunes and launch iTunes again. If the preference folder and contained file have been successfully rebuilt, the setup assistant should not appear this time.
    ... any luck with that?

  • Itunes won't open i keep getting  a problem report i press respond, but the report reappears and nothing else happens

    the itunes on my mac wont open.  I keep getting a problem report fro itunes, which i press the respond option. the box closes for approx 10 seconds then comes back. I have looked in the force close box but it is not appearing here.

    Hi there duncanbev,
    I would recommend taking a look at the troubleshooting steps found in the article below. 
    Troubleshooting iTunes installation on Mac OS X
    -Griff W.

  • I have an ipad mini and the updates tab on appstore is not showing anything once i open it. It shows that there are three updates available but when i open it there is nothing. Any help will be greatly appreciated.

    My ipad mini is showing nothing when i open the updates tab on appstore whereas it continously shows three updates available on homescreen.

    There are a number of other threads from people reporting a problem with a blank Updates tab in the App Store app - it looks like there is a problem at Apple's end which they need to fix.
    Some posts are suggesting that you if you go into the Purchased tab in the App Store app you might be able to update the apps from there, though you will need to scroll through the list to find those with updates and individually update them.

  • I installed elements 12, it won't open, a screen pops up with options for e-12 and 4 other language

    I installed elements 12, it won't open, a screen pops up with options for e-12 and 4 other languages.  When I click Elements 12 a screen pops up with a red install icon, I click it and it askes for the serial number. It won't let me type in letters only numbers. I already did the serial number once. How do I get this to work? I don't want to be a programer!  

    attach a screenshot of what pops up after clicking pse 12, http://forums.adobe.com/thread/963429

  • My apps won't update after installing IOS 6.0.1. They get stuck. What's wrong?

    Apps won't update after installing IOS 6.0.1. They get stuck. What's wrong?

    You may of had a corrupted install. Connect to iTunes backup then restore. Or update the apps on itunes then sync to the iPhone

  • Safari won't start, after installing X Lion

    Safari won't start, after installing X Lion

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Step 1
    Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • External keypad won't work after installing OS 7.

    External keypad won't work after installing OS 7. I have a "Zagg" keyboard that won't pair now to OS 7,...Why?

    They do work. I have one and mine is working. Have you tried to reset your iPad? HOlding down teh sleep and home keys until it reboots then try pairing again.
    A slightly more drastic thing is to go into the settings and reset all settings. THe downside, you will need to retweak your device but it can help fix keyboard glitches.

  • Macbook pro won't boot after installing update 10.9.3

    macbook pro won't boot after installing update 10.9.3

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Printer won't work after installing mountain lion?

    printer won't work after installing mountain lion?

    Assuming you've first checked Software Update to see if there are any updated drivers and it's still not working, you could try resetting the printing system.
    System Preferences>Print & Scan, Control+Click or Right Click on a printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again.

  • Mac Mini won't start after installing OS X 10.6.3

    My Mac Mini won't start after installing Mac OS X Snow Leopard 10.6.3. When I turn it on, the Apple logo appears and the initialization line starts to fill, but it suddenly stops. It does that again and stops at the same point, but this time it shuts down. What should I do?

    If you are coming from 10.5.8, hopefully you backed up your important data first. Your mini will need at minimum, 1 GB of RAM to install Snow Leopard and at least 5 GB of storage remaining on your boot drive.
    I treat 10.6.3 as a fresh, full install over a 10.5.8 system. That means I choose Disk Utility from the Installer's menu and repartition the boot drive as a single partition, Mac OS X Extended (Journaled) format, and use the GUID partition scheme from the options button. At this point, while still in Disk Utility, I would verify the drive under First Aid.
    Then I turn the installer loose, and reboot into a working 10.6.3 system, ready for the software updates that take the machine to 10.6.8.
    So, following the above guidelines, reinstall 10.6.3.

  • MacBook Air won't restart after installing Mavericks

    My MacBook Air (v Fall 2011) won't restart after installing Mavericks.  I have done the instal several times, done the disk repair, I have had 2 visits to the local Apple store where they installed Mavericks with their software only to return home and have it fail again.  Does anyone know of issues with the SSD or memory?
    Next visit to the Apple store is Tuesday morning 12-17-13.  Anywthing that can help us would be appreciated.  Tks David

    Ok. Nevermind. I guess I had to Force Quit/Relaunch Finder.

  • I'm updating my iphone4 to ios7 then my phone suddenly won't open, it only appears the itunes logo. what does that mean?

    i'm updating my iphone4 to ios7 then my phone suddenly won't open. it only appears the itunes logo. what does that mean?

    It means your phone is in recovery mode and you will need to restore it:
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Cheers,
    GB

  • HT1926 whenever i try to click the itunes icon on my screen, i get a  ' itunes software liscence agreement' coming up, i click agree but itunes never opens, my ipod wont make it open! (ive never had problems with itunes on my other computer)

    it all started when i installed itunes, which i have never done before on this computer as its new (second hand , but i mean new as in wiped clean)
    i downloaded the latest itunes software from the website, and everything went smoothly. when i dobule-clicked the icon on my home screen, a 'apple itunes software liscence agreement' window popping up, it had 'save as' 'agree' and 'disagree' buttons, naturally i clicked 'agree' the window went away, but nothing (even 30 minutes later, with the computer untouched) happened. frustrated i repeatedly opened it up, again and again, only to be greeted by the same window, and same blank home screen. even connecting my ipod wont force it open, changing cables wont work, and uninstalling seems a very distant probmise to fix this error. HELPP MEEE! I am nothing without my beloved ipod!
    thanks everyone,
    ange

    Try to connect in recovery mode, explained in this article:
    iOS: Unable to update or restore
    Before that, back up your device, explained here:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    How to back up your data and set up as a new device
    You can check your warranty status here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • TS1362 my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly"

    my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly" i have uninstalled it and reinstalled it twice and it stil lcomes up with that message every time I opentheiTunes icon I dont knowwhat to do

    Hello Wade,
    This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Resolution
    QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
    On the Start menu, click Control Panel.
    Follow the steps appropriate for your Windows operating system below.
    Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
    Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
    Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
    Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
    During the download:
    If you choose to run the installer, proceed to the next step.
    If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
    Follow the on-screen instructions to install QuickTime.
    Reopen iTunes.
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371
    Cheers,
    Allen

Maybe you are looking for