TS3212 The latest version of Itunes would not completely install. The loading bar went out to about the lach and sat there all night. We have a one year old I-Mac
The latest version of I-tunes would not completely install. The progress bar would go out to about the last 1/4inch and stay there all night. We have a one year old I-Mac
The latest version of I-tunes would not completely install. The progress bar would go out to about the last 1/4inch and stay there all night. We have a one year old I-Mac
Similar Messages
-
i was changing the font on my iphone yesterday and the apple came out saying it was going to respring or restart springboard i dont really remember now it has not came on since yesterday i have turned it off and on a couple of times and it does not do nothing the apple comes up and it seems like its going to start up but it freezes what do i do to fix it i really need my phone i have a child and im by my self most of the time with my son
Is your iPhone jailbroken? If so see: http://support.apple.com/kb/HT3743
-
The latest version of iTunes did not install properly on my Windows 7-64bit PC. I am getting the following error message: "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services."
I have tried the following troubleshooting steps without success:
Restart PC
Uninstall iTunes and attempt to reinstall
Verify that I am signed in as an administrator
Download and save iTunes64Setup file, right-click, and run as Administrator
Disable Norton antivirus software
Any suggestions would be greatly appreciated!Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
The latest version of iTunes does not allow me to open a playlist in a separate window. I need this feature. Is there another way? You used to be able to double click a playlist and have it appear in a new window.
Others have commented on this too. It seems to be one of the 'improvements' of the newer version you are supposed to embrace with joy as an exciting new development. You can send feedback to Apple but realize you may be perceived as standing in the path of progress.
http://www.apple.com/feedback/itunesapp.html -
When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?
after perusing other subjects with playback issues:
this is the fix:
-Launch Control Panel - Double click Quicktime, If you do not see quicktime, look on the top left side of control panel and switch to classic view. This will then allow you to see Quicktime.
-Now click the advanced tab and click on Safe Mode GDI Only, Apply, then ok. -
Latest version of itunes does not support Quicktime can not play movie from library
Latest version of Itunes does not support Quicktime. I can not play movies out of my itunes. Please fix
I don't usually download video from the iTunes store. I had a couple of long plane rides coming up and thought I might have time to watch the Stanford IOS7 programming class. On the plane I discovered this issue which has gone unaddressed since 2011 and has been worsened in Mavericks. in 2011 the advice was to open iTunes' get info pane and click run in 32 bit. That worked at least for some people. In Mavericks, iTunes will not launch in 32 bit.
For the files you can locate in the finder ( mine are at
/Users/raine001/Music/iTunes/iTunes\ Media/iTunes\ U/Developing\ iOS\ 7\ Apps\ for\ iPhone\ and\ iPad/1.\ Class\ Logistics\,\ Overview\ of\ iOS\,\ MVC\,\ Objective-C.mp4
) you can click on the file in the finder and it will launch in QuickTime. For some reason on the plane I could see the first lecture in the iTunes view but, although I could see all the other lectures in the finder, I could not see the first one.
Ah well, maybe some other year I'll think about getting up to speed on ios7. Heck, maybe by then they will design a decent user experience. -
While looking to upgrade to a newer MBP, found out latest version of iTunes does not support wired syncing of iCal and contacts. Syncing of these must be done through iCloud. This is a deal breaker for me for several reasons. Are there any workarounds or do I have to go back to a PC with my tail tucked between my legs?
When you say wired syncing, are you meaning between an iphone and your mac?
-
Latest version on itunes does not support Quicktime......can't play TV show my wife bought last night on iTunes. Help
"This movie requires QuickTime, which is not supported by this version of iTunes." http://support.apple.com/kb/TS3771
-
Hey guys, i have a one year old Mac desktop which has become incredibly slow over time. Strange thing is that I have not downloaded anything save for install Windows for Mac. Storage wise the bulk of my info is stored on hard external drives. Can someow
Hardware Information:
iMac - model: iMac11,2
1 3.2 GHz Intel Core i3 CPU: 2 cores
4 GB RAM
Video Information:
ATI Radeon HD 5670 - VRAM: 512 MB
System Software:
Mac OS X 10.6.8 (10K549) - Uptime: up 0:2:53:43
Disk Information:
WDC WD1001FALS-40Y6A0 disk0 : (931,51 GB)
(null) (disk0s1) <not mounted>: 200 MB
Macintosh HD (disk0s2) /: 931,19 GB (894,98 GB free)
OPTIARC DVD RW AD-5680H
USB Information:
Apple Inc. iPad
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
FireWire Information:
Kernel Extensions:
Problem System Launch Daemons:
[failed] com.apple.suhelperd.plist
[not loaded] org.samba.winbindd.plist
Problem System Launch Agents:
[failed] com.apple.Kerberos.renew.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.rim.BBDaemon.plist
[loaded] com.zeobit.MacKeeper.AntiVirus.plist
Launch Agents:
[loaded] com.rim.BBAlbumArtCacher.plist
[loaded] com.rim.BBLaunchAgent.plist
User Launch Agents:
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
iTunesHelper
BlackBerry Desktop Software
Bluetooth File Exchange
Garmin ANT Agent
Dropbox
3rd Party Preference Panes:
Flash Player
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
GarminGpsControl.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
User Internet Plug-ins:
Bad Fonts:
None
Top Processes by CPU:
Top Processes by Memory: -
My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?
That sounds horrible. There are a number of reasons it could occur.
The first thing to do is ensure you have adequate backups, because what you describe can be a symptom of impending disk failure.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting. There are four separate parts to it; read everything first.
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Read about it here. It contains a link to download EtreCheck. Don't download it from anywhere else (such as may be found by following the results of an Internet search).
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial. -
I have a one-year old iMac and Safari will NOT remember bookmarks I try to add. Any suggestions?
I have a one-year old iMac and Safari will NOT remember bookmarks I try to add. Any suggestions?
Launch the Terminal application by entering the first few letters of its name into a Spotlight search. Copy or drag -- do not type -- the line below into the Terminal window, then press return:
ls -Oel Library/Safari
Copy any lines of output that appear below what you entered and paste them into a reply to this message. -
I have a one year old Macbook Air 13. I have a brand new 22" external monitor. In turning the Macbook and monitor on, the monitor displays very well, but within a few minutes it begins this incessant blinking (temporary black out of the screen that lasts anywhere from 1-5 seconds). This has been going on for a long time (it also happended with my older monitor which apparantly I threw out when I should have kept it thinking it was the problem). From reading various blogs in the Apple support community, this appears to be a widespread problem, but I don't find a solution, only a lot of speculation. I'm very surprised the Apple folks haven't figured this out. As a new Apple user, heretofor, I have been very impressed with the support and effort to get fixes out to users. This, however, has me frustrated to the point of junking my Mac and going back to a PC. I love the Macbook Air and most of the functionality, but I cannot function without an external monitor. Anybody have any ideas, please help. Frustrated, Jim
Your dsplay is getting extended onto the external monitor. Chcnage the setting to duplicate it or only display on the external monitor and you should be fine,
Let me know if this worked for you. -
Latest version of iTunes does not work on Windows Vista
after downloading the latest version of iTunes, it would not load up & could not be run. I started getting an error message when the computer was started - so the problem is affecting the startup menu i guess. Anyway - no iTunes at all.
I cannt remember the error message i received on startup - but it was looking for a program & was telling me to re-install it. I did not realize it had anything to do with iTunes until i actually tried to start iTunes from my desktop & got the same error message.
i tried:
1) restarting my computer
2) uninstalling different unnecessary Apple software packages (iCloud, all of the remote maintenance crap)
3) restarting again
4) uninstalling & reinstalling iTunes & restarting
...none of this worked. In fact, i cannot even re-install iTunes w/out getting an error message.
The error message i got when re-installing iTues was identical to the one I got when I installed the latest updates when prompted by the update server.
very frustrating! did Apple hire IT people from my day job? Because they tend to botch stuff in the same manner.
dwi forgot the exact text of the original error message, but it was looking for a *.dll that was not there - as if the install had not completed.
tried re-installing & it would stop in the middle of the download with a completely different error message - i was going to screen grab it, but then i got it to work!
Anyway, after uninstalling everything related to iTunes, emptying my recycle bin, cleaning up a bunch of unnecessary files, and stopping some programs that were running in the background (using task manager) - i did a complete re-install from the Apple iTunes website & it worked fine.
thanks!
dw -
Latest version of iTunes will not launch
I installed the latest version of iTunes 12.1.1.4 as soon as it was available and it was working fine on my Windows 8.1 system. Then about a week ago, suddenly it would not launch with no response whatsoever, no hourglass, no error messages, no error logs, nothing. When I tried to use the safe mode as well as using admin privileges I had the same result...nothing. I followed all of the instructions in HT203206 to uninstall and reinstall twice with the same results. I believe that Windows had a major number of updates between the time I updated iTunes and the time it stopped working, but I can't pinpoint what, if any, issues that caused.
Can someone please help?Here is an update. I rolled back my system to a date prior to the Windows latest updates and again followed the instructions in HT203206 to uninstall and reinstall. No luck. I then uninstalled that version and installed the x64 version for "older video cards". No luck.
There seems to be a number of support questions regarding this topic with no additional answers other than to uninstall and reinstall per HT203206. When this doesn't work what do I do next, start using Windows media player? This is not the answer I would expect from Apple. There must be an explanation for the program to stop working and hopefully a solution.
As a footnote, my system is Win 8.1 with all updates except the latest March hotfixes, Intel I5 core, 16G memory, Geforce 750xi video and Turtle Beach audio, all device drivers are up to date. No other programs or device driver updates were performed prior to the program not working. -
TS2363 latest version of itunes will not run in windows 8.1 after download
Just downloaded the latest version of iTunes and it will not open in Windows 8.1. Error is entry point not found.
See Troubleshooting issues with iTunes for Windows updates.
tt2
Maybe you are looking for
-
Open Page in new window using action link
How do I open a page in a new window, using action link ? If I put javascript window.open in OnClick event, the action event ins�t called.
-
Is it possible to use Apple's Remote Access to go into another logged in user on the same machine? Lets say on 1 computer you are logged into the "main" account and then log in with another user account. Can you the open Apple Remote Desktop and acc
-
I am trying to create an process and action that does the following: Process outside of PS that stages files for edit PS Action to set selection(s) (each selection is on its own channel) on the original tif PS Action to open Background template file
-
Hi All, My scenario is Soap->XI->BPM->RFC. I get a soap request in synchronous way with Request and Response messages I Map my request to a RFC and If there's any application error or mapping error I have to send SOAP fault exception to my Soap Sendi
-
Email link pops up window in IE
I have selected text and used the mailto:[email protected] link to create an email link. I have tried static text and dynamic text and in IE, the mail client pops up, but so does an annoying window with "Navigation to Website was cancelled". It seems