TS3274 buttom not function in I-pad

I already reinstall the I-Pad but the still having problem at the both  of
buttom for manually adjusted volume of i-pad and the buttom to shut down /swift off buttom for my I-pad.
both of them are not function why is it broken or setting problem can your reply me asap tq

Just trying to understand fully what you are saying....
You said you reinstalled the iPad - do you mean that you restored the iOS software on the iPad?
You said that the power button is not working and the volume adjuster is not working either. The volume adjuster - are you talking about the button on the side of the iPad?
If neither button is working now, you might have a hardware problem - if you did restore the iOS software and that didn't help. You can't fix a hardware problem by restoring the iOS software. You might need to have the iPad evaluated at an Apple Store.

Similar Messages

  • When a pdf file is opened in a tab, the automatic scroll function from the pad does not work in the other tabs, but only for the particular PDF tab.

    The scroll function from the pad/mouse does not work for the other tabs when a PDF file is opened.

    Hi NSHS,
    Have you checked to see if your PDF add-on is up to date? You should take a look at the [[Opening PDF files within Firefox]] Knowledge Base article. There is a lot of good information in there. You should try both of the suggested PDF add-ons to see if that fixes the issue.
    Hopefully this helps!

  • :( Multi Touch Pad Not Functioning Well.

    +*I'm using 15 inch MacBook Pro which i purchase on June 2008, Ok here is my problem that I'm facing, lately my multi touch pad not functioning well it can be use only on safari other then that it unable to use at any-other folders or places. Like normally I'm able large the picture by using the multi touch pad but now i can only use it on safari to larger the font size. Do i need to update my Multi Touch Pad? What do i have to do? Please help...*+

    Hello @LouisTONG,
    Welcome to the HP Forums.
    It appears that you're tocuhpad is causing some issues. I will attempt to assist you with this.
    If this is a new notebook, make sure you've run all Windows updates and completed any updates listed in the HP Support Assistant.
    Something may address that issue.
    This may also have something that could help you: Using and Troubleshooting the TouchPad or ClickPad (Windows 8).
    If you need further assistance could you please provide the Model and Product numbers for your notebook.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Keyboard+trackpad not functioning at all on HP 2000 Notebook PC! please help!

    Tonight I turned on my laptop (HP 2000 Notebook PC) to find that the Keyboard and track pad was not responding, the only thing that worked was the wireless mouse.
    I can not find the product number but the name is HP 2000 Notebook PC, the operating system is Windows 8, I can't login to see if there are any error messages, the last thing I remember doing was trying to apply a new cursor image and it told me to restart and when I did I couldnt log back in or type anything at all, I could only use the mouse.
    Also the things I have tried to do are: Restart Computer, Take out batter and restart. (I cant do much because I can't type in password)
    All help will be greatly appreciated!
    UPDATE: I logged in using the On-Screen Keyboard, it seems like a hardware malfunction and not a virus because i cant find anything in my downloaded stuff that wasnt there before. So it is just a hardware malfunction.
    UPDATE #2: it says that the driver (for keyboard and touchpad) may be corrupt or missing and it says Code 39 in parenthesis.

    Hello Oceanlife,
    You state that the keyboard and touchpad are not functioning, that is correct? I will try to assist you with this issue.
    As of today are you still having this problem?
    If you have, any more questions do not hesitate to ask. .
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • "A device attached to the system is not functioning"

    Hi!
    I'm hoping that all the smart people here can help with my problem. I help support/develop several custom windows application. One of these applications is written in Delphi and there is currently a problem with a feature a single computer owned by a client.The client's computer does have the latest version of adobe installed.
    * The user is able to select a document from a data grid, and click a button to view that document (in this case a pdf).
    * The document is saved from a database to the user's disk
    * Using a shell command, the application asks windows to open that file.
    Normally this works quite well, until recently. If this client tries to view a pdf file in this manor windows returns a system error, error 31, and the message "A device attached to the system is not functioning" is displayed. If I naviage to the location where the file was saved to an attemp to open it via double clicking, adobe reader opens the document right up. The application historically has had no problems with pdf's nor any other doucment type. If I change the file assoication from adobe to note pad, the application does open the file with note pad, but it is not readable. If I change it back to adobe reader, the problem persists. I've tried uninstalling adobe, reinstalling, and using a previous version of adobe. Any suggestions would be appreciated.
    FYI, before someone tell's me I should be talking to microsoft, I am also inquiring on the windows side of this through msdn. Since I am not 100% sure if this is a windows or adobe reader issue I would appreciate suggestions on both sides.
    Last but not least, incase it is of any help, this is the delphi command used to ask windows to open the file:
    ShellExecute(GetDesktopWindow, 'open', PChar(TempFile), '', '', SW_SHOWNORMAL);
    Any and all help is appreciated.
    Thanks!
    Louis

    Is the computer in question connected to the Internet, and if so, is the Internet connection working correctly?
    It is possible that Adobe Reader tries to check for updates when it is launched, then finds a faulty network connection.
    Check the Device Manager for non-functioning network devices.
    Also try http://fixitcenter.support.microsoft.com/ to find other potential problems on that system.

  • Spry Menu Issues - Not functioning correctly in Microsoft IE

    Hi there,
    I am fairly new to web design and dreamweaver.
    I have constructed a simple page that I am happy with complete with Spry Menu which again I am happy with.  However this spry menu works perfectly in firefox but for some reason on IE my spry menu does not function correctly and goes all over my page!
    CORRECT VERTICAL MENU - FIREFOX -
    INCORRECT MENU FUNCTION! - IE -
    See my CSS Code below for the spry menu in questions - if this helps -
    @charset "UTF-8";
    /* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
    /* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
    LAYOUT INFORMATION: describes box model, positioning, z-order
    /* The outermost container of the Menu Bar, an auto width box with no margin or padding */
    ul.MenuBarHorizontal
        margin: 0;
        padding: 0;
        list-style-type: inherit;
        font-size: 100%;
        cursor: default;
        width: 1000px;
        height: 47px;
    /* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
    ul.MenuBarActive
        z-index: 1000;
    /* Menu item containers, position children relative to this container and are a fixed width */
    ul.MenuBarHorizontal li
        margin: 0;
        padding: 0;
        list-style-type: none;
        font-size: medium;
        position: relative;
        text-align: center;
        cursor: pointer;
        width: 318px;
        float: left;
        height: auto;
        background-color: #000000;
        border: 2px solid #FFF;
        font-family: "Palatino Linotype", "Book Antiqua", Palatino, serif;
    /* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
    ul.MenuBarHorizontal ul
        margin: 0;
        padding: 0;
        list-style-type: none;
        font-size: 100%;
        z-index: auto;
        cursor: default;
        width: auto;
        position: absolute;
        left: -1000em;
        font-family: "Palatino Linotype", "Book Antiqua", Palatino, serif;
    /* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
    ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
    left: auto;
    /* Menu item containers are same fixed width as parent */
    ul.MenuBarHorizontal ul li
        width: 318px;
    /* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
    ul.MenuBarHorizontal ul ul
        position: absolute;
        margin-top: -5%;
        margin-right: 0;
        margin-bottom: 0;
        margin-left: 95%;
    /* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
    ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
        left: auto;
        top: 0px;
    DESIGN INFORMATION: describes color scheme, borders, fonts
    /* Submenu containers have borders on all sides */
    ul.MenuBarHorizontal ul
        border: 1px solid #FFFFFF;
    /* Menu items are a light gray block with padding and no text decoration */
    ul.MenuBarHorizontal a
        display: block;
        cursor: pointer;
        background-color: #bcbdb9;
        padding: 0.5em 0.75em;
        color: #FFF;
        text-decoration: none;
    /* Menu items that have mouse over or focus have a blue background and white text */
    ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
        background-color: #000;
        color: #FFF;
    /* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
    ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
        background-color: #000;
        color: #FFF;
    SUBMENU INDICATION: styles if there is a submenu under a given menu item
    /* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal a.MenuBarItemSubmenu
        background-image: url(SpryMenuBarDown.gif);
        background-repeat: no-repeat;
        background-position: 95% 50%;
    /* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
        background-image: url(SpryMenuBarRight.gif);
        background-repeat: no-repeat;
        background-position: 95% 50%;
    /* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
        background-image: url(SpryMenuBarDownHover.gif);
        background-repeat: no-repeat;
        background-position: 95% 50%;
    /* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
        background-image: url(SpryMenuBarRightHover.gif);
        background-repeat: no-repeat;
        background-position: 95% 50%;
    BROWSER HACKS: the hacks below should not be changed unless you are an expert
    /* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
    ul.MenuBarHorizontal iframe
        position: absolute;
        z-index: 1010;
        filter:alpha(opacity:0.1);
    /* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
    @media screen, projection
        ul.MenuBarHorizontal li.MenuBarItemIE
        display: inherit;
        f\loat: left;
        background: #FFF;
    ** I am also using Windows 8 and Dreamweaver CS6 If this helps.**
    Any help with this would be fantastic as I need this to be resolved before the end of the week. 
    Any further information required please message me to find out.
    Thanks,
    Jamie

    THE CONFLICT IS BETWEEN YOUR DOCUMENT CSS AND THE SPRY CSS.
    It is because the <li> and <a> TAGS have been styled and therefore OVERRIDDEN THE SPRY CSS.
    Use CLASS TAGS e.g.  <li class="anyclass"> and <a class="anyclass">
    and STOP USING THE <a> TAGS.
    N.b. you may need to unstyle any <a> or other TAGS that conflict with the SPRY CSS.  (However it's best to start over knowing that styling basic tags may affect the SPRY CSS).

  • Touchpad not functioning correctly

    I have an Envy 17,(Windows 7) and the touch pad is not functioning correctly.  I have had it do similar things in the past but they seemed to fix themselves after a few minutes, but this time it just keeps messing up. I CAN click on programs to open them but once in a program, I cannot click on anything. I CAN click on links when online, but they always open in a new tab and when I attempt to click on a new tab, the tab completely closes out. Once a program is opened, I cannot close/minimize/maximize it using the touchpad, nor can I access File/Edit/other menu options.  I also cannot click in a typing field. (I'm using a different computer to do this post)I can barely move the curser around.  It jumps or freezes up.  I move it up about an inch and as soon as I take my finger off the touchpad the curser goes back to where it originally was.  I've tried restarting the computer but that hasn't worked.  I've attempted tried some other things as well, but since I cannot click on anything with the touchpad and can barely move the curser, I am at a loss for what to even try.  Everything was working fine this morning.  I literally got up from the computer, made breakfast and sat back down and it was all glitched up.  No one had touched it...  I had not recently downloaded anything nor have I made any updates to the computer.  Thank you, Neyephe

    Hello there, It sounds like there is a hardware issue with your touchpad, which you need to replace. As stated in the warranty, the touchpad may only be replaced by an Authorized Service Provider. If you cannot find any places that are authorized, you may contact the HP Support Center via phone and arrange a date for your touchpad to be replaced. In the meantime, you can buy a USB mouse to navigate your laptop. Best wishes getting your issue fixed! Best Regards,Shawn

  • Static thumbnail images not functioning (Encore 1.5.1)

    I've been using Encore 1.5.1 (Build 42735) for many years now on this PC (AMD X2, Shuttle XPC P2500G), and have had no problems. However, in the last couple of weeks, the following symptom has developed...
    My typical workflow is to encode M2V files using Premiere Pro 1.5.1, then import them as timelines into Encore 1.5.1. Once the timeline is created, I then set the chapter points, create menus, select video buttons, etc. Ultimately, I set thumbnail images for each video button using the "SET POSTER FRAME") option (based on frames from the M2V timeline), preview the project, then create a DVD image.
    The Problem - When I try to "set poster frames" using timelines associated with M2V files, the image that appears in the menu editor's video button is severely distorted. (In some cases, the image is also upside down!) The image is corrupt when previewing the project and when the DVD is burned.
    This only seems to happen when I use M2V files AND I make the buttom image static. In other words, if I check "Animate Buttons", the thumbnail image in the menu editor is corrupt, but previews and burns correctly. Also, if I use AVI files instead, everything works perfectly.
    By the way, preview/playback of the actual M2V timeline works fine. It's almost as if Encore's menu editor is now having trouble interpreting the data from the M2V file.
    As I stated before, I've been using M2V files in Encore since 2004 with no issues, and in the last few weeks this problem has begun. Has anyone out there encountered this problem? If so, what is causing it and is there a solution?
    Thanks in advance for any help offered.

    I've done some additional testing... But first a little background.
    I have 2 PCs with almost identical software installed on them, including Premiere Pro 1.5.1 and Encore DVD 1.5.1. Although the hardware is different, I've configured these machines to be able to share any project I've EVER created. Any software installed on the first PC (built in 2003 - XP Home SP2) has been duplicated on the second PC (built in 2005 - XP Pro SP2). In fact, whenever I upgrade software on one machine, I always upgrade both to keep them in synch. Since 2005 I've been able to move projects back and forth between these two PCs with no problem whatsoever.
    Now the test...
    I created a different five minute m2v file on each PC using the media encoder (v1.1) within Premiere Pro 1.5.1. (Remember, that's my normal workflow.)
    I took the m2v file from the older (and still functioning correctly) PC, then used that file to create Encore projects on both PCs. I took the m2v file created on the newer (and currently not functioning correctly) PC and created Encore projects on both PCS.
    That's a total of 4 Encore projects. For each project, I created a simple "blank 4X3 menu", and added a single video button. I linked the button to the 1 and only chapter on the timeline, then set the poster frame for the button.
    The results are as follows:
    1) It doesn't matter which computer creates the m2v - Any m2v can be copied to the old, functioning PC, and the Encore menu editor and the preview function displays perfectly.
    2) When using the Encore menu editor and preview features from the newer, problematic PC, single images (from m2v files created from either PC) set as poster frames are not interpreted properly. The image is displayed upside-down with a "mosaic" look to it.
    3) If I set the thumnail image of the button, check "Animate Buttons", then render the motion menus, the menu editor still displays the corrupted image, but the preview looks perfect.
    4) If I use AVI files instead, all these problems disappear.
    Someone suggested this might be a codec problem, but if so, wouldn't the files not encode correctly as well? Remember, I can create the m2v on the "bad" computer, copy it to the "good" computer, and everything works fine.
    It is true that (a month or so ago) I upgraded software on both machines - QuickTime 7.5.5 (which probably has some codecs) and Sonicfire Pro 5, which needs QT to run. Both sets of installs/upgrades went smoothly and the software on both PCs is working with no anomolies. Since the exact same versions are on both computers (with the old machine working perfectly), I'm having trouble buying the bad/rogue codec theory.
    I could ignore this problem and just use AVI files. However, since AVI files are so much larger and take so long to back up to 4mm tape, I really don't see that as a long term solution.
    Based on this information, does anyone have any ideas?
    Thanks so much.

  • "ChnCFCFiltCalc" in Crash option not functioning correctly

    It appears that the "EndPoints" option for the "ChnCFCFiltCalc" command is not functioning correctly. It does not seem to be reflecting the points to pad the data at the beginning and end of the signal. This is based on the results of filtering done with and without the option activated. Not activating the option appears to reflect the data and you get the results you would expect to see with the option activated. Activating the option give you results you would expect to see without the option activated.
    I am using Version 8.0.981
    This was functioning correctly in previous versions. Can you tell me when the "EndPoints" option stopped functioning correctly? I assume it was with Version 8.0. Is it correc
    ted in Version 8.1?

    Hi,
    The parameter "CFCPREEVENTTYPE" is an enumeration variable with the selection "EndPoints" or "ZeroMagnitude" and not is optional.
    Every mathematical function in DIAdem represents their parameters in global variables - eg. "CFCPREEVENTTYPE" as one parameter of the function "ChnCFCFiltCalc".
    If you now call a function in a VBScript you have two possibilities
    a) call the function with parameters like ChnCFCFiltCalc(X, Y, E, CFCFiltType, 0,"EndPoints")
    b) call the function without parameters like ChnCFCFiltCalc
    In case b) DIAdem will use the current content of the global parameter variable.
    Maybe that this is you problem.
    Kind regards
    Walter

  • Wireless mouse not functioning

    My HPPavilion wireless mouse is not working.  Changed batter. Bought new one.  Same problems exists Sensor light on mouse does not light even w/ new mouse.  Must be another problem.  Touch pad is fine.  Use Windows 7. Product no. is LW350UA#ABA  

    Hey Maryc61,
     Can you please tell me if the mouse works on another computer? 
    You may also want to try disabling the touchpad and see if the mouse starts responding. You can do this by double tapping in the upper left corner of the touchpad. 
    Here are some documents you will want to go through:
    Troubleshoot a wireless mouse that does not function correctly.
    Troubleshooting Mouse Problems (Windows 7, Vista, XP)
    Make sure you go through these documents in full.
    Hopefully this helps!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • HT4061 My mail is frozen. I get to it from the Mail icon, but then it will not function. Touching it will not move it at all.

    My mail is frozen. I can get to it from the Mail icon, but then the touch pad feature does not function. I cannot move the mail page up or down or from side to side. No messages will open. Help!

    Try closing the Mail app via the taskbar and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Photosmart c309a- 'The wireless radio is not functioning, contact HP support'

    My Photosmart c309a wont connect wirelessly. Upon running the wireless network test, the report states, and I quote "The wireless radio is not functioning. Contact HP support". The report then states the following:
    Wireless on                    PASS
    Wireless working         FAIL
    and everything following that stated as 'not run'.
    Ive searched for other threads on the subject, and the only sloutions I can find are unplug the printer and plug it back in to reset it (made no difference), and try the HP print and san doctor (link was dead, found it manually and didnt work as it cant connect to or even see the printer on the network).
    So the question is, is this a hardware fault, and if so what can be done about it?

    Hello,
    Yes, it is an hardware issue and indicates that the Wireless card is not functional.
    Please call HP Tech Support for further assistance.
    If you are in US , the toll free # is 1-800-474-6836 .
    If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the white star under my name.
    Click "Accept as Solution" if it solved your problem, so others can find it.
    I work for HP
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Error message saying a device attached to the system is not functioning

    i m getting an error message saying a device attached to the system is not functioning whenever i m trying to connect my pc to my smartphone. i tried all your options like uninstalling failed updates from my update history, checking if their is any flag
    in device manager option but nothing helped me.. plz solve my problem..

    Hi,
    Could you please have a share with your phone's information?
    Based on what I know, different phones may have different softwares developed by the manufacturer to make the connection through Windows operating system, we may check with the phone's manufacturer side and see if there could be some helpful information
    offered.
    Besides, please take a check with
    Event Viewer and see if any special errors logged there.
    Best regards
    Michael Shao
    TechNet Community Support

  • Bridge not functioning in PhotoShop CS3 Extended

    I deactivated Photoshop CS3 on a computer I was no longer using and installed it (CS3) another computer.  I activiated CS3 on the new computer.  However, when trying to use Bridge, I get a message that says that Adobe no longer supports Bridge Home and Bridge does not function on the new computer. Is there anything I can do to get Bridge to function as part of CS3 Extended?

    Thanks, that worked. 
    In a message dated 12/28/2011 10:13:56 P.M. Eastern Standard Time, 
    [email protected] writes:
    Re:  Bridge not functioning in PhotoShop CS3 Extended
    created by Curt Y (http://forums.adobe.com/people/Curt+Y)  in Bridge 
    Windows - View the full  discussion
    (http://forums.adobe.com/message/4107610#4107610)

  • Satellite P300D-110 integrated webcam is not functioning properly.

    Hello everyone,
    as the title says, the integrated webcam of my Toshiba Satellite P300D-110 is not functioning properly. Allow me to explain. Using the Camera Assistance Software I can take photo's and record music. If I try to record a video the preview screen turns up black and the end result tuns out black aswell, completely black.
    Whenever I try to use my camera with applications such as MSN Live Messenger, Skype or at community websites using Firefox, Internet Explorer or Safari the application in question crashes.
    *How did this happen?*
    You tell me. This is how it went;
    * Day 1: I've started up my laptop and looked at my fresh and clean install of windows vista home premium. I tried out my webcam using the webcam assistance software and it worked like a charm.
    * Day 2: Once again I boot up my laptop and try to start my webcam only to find out that it no longer functions.
    To give a quick summary of the thread;
    * Using Camera Assistance Software provided by Toshiba I can take pictures.
    * Using Camera Assistance Software provided by Toshiba I can record sound.
    * Using Camera Assistance Software provided by Toshiba I can _*NOT*_ record or preview a video.
    * I can not start my camera using any other application such as but not limited to; MSN Live Messenger, Skype, Mozilla Firefox, Internet Explorer and Safar.
    * I have downloaded and isntalled the latest drivers from the Toshiba website.
    * My laptop is about a week old.
    I'm not sure what more I can do, all I want is for the webcam to work, if anyone can help me out please do so.
    And if possible WITHOUT having to reinstall Windows Vista Home Premium.
    I haven't even used it and wouldn't want to make that a solution for all the problems that might occur in the future.
    Sincerely,
    a sad customer.

    Using Camera Assistance Software provided by Toshiba I can NOT record or preview a video.
    Can you please describe the steps how you try to do this? I must ask you this because it runs well on my notebook. When the recording is finished player opens and you can see recorded movie. It is avi format and at the top of this player you can see the path where the movie is saved.
    Most strange thing for me is that you cannot use it with Skype. Ok for MSN is not the perfect but there is absolutely no problem with Skype. Check the settings and it must work somehow.

Maybe you are looking for

  • Can not view audit trail of BPMN Process instance in Enterprise Manager

    I can not view the audit trail of BPMN Process instance in Enterprise Manager. When I try to click on BPMN process link inside process instance flow trace a NoClassDefFoundError error occurs. How can I fix this? ####<Jan 23, 2014 1:44:24 AM MSK> <Err

  • XML Type and ODP

    Hi, I have some problems with running application which uses ODP to connect to Oracle in version 9.2.0.6. There is one PLSQL packages with maybe 30 procedures. Half of this have VARCHAR2 input parameters. In that version of Oracle there is bug - I ve

  • How do I take bold off of the desktop icon font on my MacBook Pro?

    I thought I did it in the past, but I can't figure it out now.  I am looking at the desktop icons on my MacBook Pro, and the font is bothering my eyes.  I am trying to take the bold off, but I cannot figure out how to do it.  I saw where to change th

  • Transfering music from Nano to new iMac without old computer

    I recently had a hard drive fail on my old PC laptop and can't access my iTunes music for my Nano. Is there anyway you can download music onto the new iMac without having access to the old PC? I'm talking about music that's been loaded onto the Nano

  • Mpd and create-db

    I've Googled around for couple of days now since I switched from Banshee to the lighter mpd+sonata combo. The problem is that create-db just doesn't like some of my songs and hangs, and I don't know why. Please help! I can't be using Banshee forever