TS3274 If my iPad home button got problem?

If my iPad home button have problem but my iPad still under warranty can i use the warranty to take service for my iPad?

Yes the home button problem would be covered by the warranty as long as you didn't do something accidentally to cause the home button to fail. If it is a hardware failure - it will be covered under the warranty.
Is the home button no longer working? Have you tried to calibrate the home button?
Calibrate the home button
1. Open a stock iOS app, such as Contacts
2. Press & hold the sleep/wake button at the top of your device until the red slider control appears.
3. Immediately release the sleep/wake button and press & hold the home button. Hold until the red slider disappears.

Similar Messages

  • My ipad Home button is some time not working

    my ipad Home button is some time not working

    Try here >  iPad: Not responding or does not turn on
    Apple - Support - iPad - Hardware Service

  • IPad home button is not working

    Hi, my iPad home button stopped working. Can any one help me?

    Try resetting your iPad.  Hold the home and on/off buttons together for about 10 seconds till the Apple logo appears.

  • TS3274 How much will it cost to replace my IPAD home button.

    My home button is not working I was wondering if anyone can advise on a place that I can get it repaired. Or do you reccomend taking it to the Apple Store.

    (1) Open the Mail app.
    (2) Press the Sleep/Wake button until the red slider shows.
    (3) Immediately release the Sleep/Wake button and press the Home button. Hold until the red slider disappears and then release the Home button.
    (4) Now try out the Home button again.
    Or, as a temporary measure, Settings, General, Accessibility, Assistive Touch, On .......

  • Ipad home button

    Hello I'm Tommy and I'm having trouble with the home button on my iPad. I got this in March and it is almost brand new, so I don't think it is broken. But,for some reason my iPad's home button is not working. I've tried things such as recalibrating the iPad's home button like going on contacts and pressing thr sleep button until the red slide appears and holding the home button. Also, I tried sucking the air out from the home button. But both of them just worked just for few days. Also, I started to have this problem since I updated my iPad to iOS6. So, do you guys know how to fix this problem?
    Thank you :)

    Mine is also not functioning properly. It started before I upgraded to 4.2, I thought maybe the update would fix it but it didn't. Sometimes I push the home button once and it inverts the screen as though I pushed it three times. Some times it doesnt respond at all. I spoke to a genius, his suggestion was it could be a software issue that COULD be remedied by them doing a reset that is more in depth than that that could be done at home. But he suggested before we do that I play with deleting the running apps that are in the multitasking tray as they are possibly taking up the RAM of the iPad. Hmm, really? Not. I am still having issues.

  • IPad home button not functioning?

    I got my iPad 2 just a month ago and now the home button refuse to function properly. I used to press it hard with all my strenght before it can work. Please how can I solve this problem.

    Home button calibration
    1. Open a pre-installed app, such as Contacts
    2. Press and hold the sleep/wake button until the red slider appears
    3. Immediately release the sleep/wake button; press and hold the Home button.
    4. Hold until the red slider disappears.
    If the calibration doesn't work try blowing air thru' the 40 pin docking port.

  • Ipad home button not working after updating to iOS 4.3.3

    my ipad's home button was working fine until i updated the software to iOS 4.3.3. today. now it is completely unresponsive and it is rendering my ipad unusable.  is there any way to fix this problem?

          This link may help you. Ipad unresponsive or not sycning!

  • IPad home button cover that keeps button active

    Hello folks,
    I have 1st Gen iPad that I use sometimes. Recently, DS has been using it but with his dirty/hands, a lot of dirt gets trapped under the button and it becomes unresponsive. I wonder if there is any home button cover that I can use which will let him use the home button but the dirt from his hands won't get under the button.
    Many thanks in advance.

    I had this problem with an iPad2, purchased in May 2011.  It occured at about the 8 month point.  After a few weeks of increasingly erratice behavior, the home button failed completely.  Apple replaced the iPad, in the store, without question.   The problem occured again, in the brand new iPad, after 60 days.  It appears to be a known issue.  Resets and restores did not solve the problem.
    I am currently using the second iPad with its home button working less and less consistently.   As a workaround, I use the ACCESSIBILITY setting in Settings / General.  I have it turned on.   It gives me an on screen option for the home button.   Should the physical button fail completely, as it did in my first iPad, this will at least give me an option to use the iPad until I take it back to the store.   This is important if you want to remove confidential data before turning the iPad in for repair.
    It goes without saying that this is disappointing.

  • IPad home button issue. Nothing is working.

    So I have had my iPad2 since December, and have had no issues until recently. A few days ago, the home button became slow to respond, and within minutes stopped worked altogether. I looked online for an answer, and one solution was to restore the device through iTunes. I did this and was happy to see that it was working again.
    Today, it just stopped working again. I don't want to restore it again if it is only going quite working again. The button isn't working at all, so I can't do a hard reset. I have tried syncing it, shutting it down, and nothing is working. So far, apple support hasn't helped. I'm hoping somebody as a simpler, longer lasting solution for it. I don't think it is hardware since the restore fixed the issues before, so I was hoping to fix it myself before I go the route of repair.
    Thanks for any help.

    Apple does not repair iPads, they replace them. Take it to the location where you purchased it and have it replaced under the warranty.

  • My ipad home button wont bring up the multitask bar when i double click it help please!!!!!!!!!

    please help

    If a double-click (which you need to do fairly quickly) isn't working, then have you tried a reset to see if it then works after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Ipad home button won't work

    My iPad 2 'Home' button ceased working - this means that any application stayed on the screen, and I hadto power the device off to access another app.
    Later, I follwed some of the advice online,  - powering it off while holding the 'home' button.  It didn't appear to work - but eventually it did! What did I do right? Is this a sign of bad things to come?
    It's 18  months old.

    http://www.apple.com/support/ipad/contact/
    is it brand new cuz i remember hearing how ppl were sold the fake display versions of ipads and ipods so it might be that if not then send a report in to apple for a fixing or replacement if within warranty it will be free

  • IPad Home Button Physically Broken

    My iPad Mini with Retina Display's home button is broken. The button isn't unresponsive, like some people's, I can't press it at all. What can I do?

    Make an appointment at the genius bar of your local Apple Store and get it fixed...

  • Home button intermittent problem

    My IPAD 2 home button has developed a fault, sometimes it works, sometimes it does'nt, when the fault is there I am unable to do anything with my Ipad apart from restart it and even then this doesnt always cure the issue.

    Here's a trick to calibrarte the home button:
    Open a stock iOS app (e.g., Clock). Once the app is open, press your iPad’s power button until the ‘slide to power off’ screen appears. From that screen, press and hold your Home button until iOS force quits the stock app you have open. You’re done!

  • IPAD HOME BUTTON - FEEDBACK NEEDED PLEASE!

    Hi,
    Just had a replacement iPad following a fault with the volume button. I was not allowed a brand new one despite only having had it 27 days! I was given a replacement from a brown unmarked box and was assured that thisnwas brand new.
    Had it two days and the home button feels a little loose and clicky. Is this common that you can feel some play with the home button or am I just being too picky about it all.
    Could really do with finding out if others are like this. So that I have something of credibility to take to the apple store.
    Thanks
    ipad   iPhone OS 3.1.3    

    Clicky when you push it, definitely. Loose - not at all. No movement aside from the inward movement when it is pressed.

  • I have got a ipad 2 from  China,but i am in singapore now ,the ipad home button spoil,can get warranty in singapore ,I have warranty card.

    Hello, anybody is here ?

    iPad Service Locations
    https://locate.apple.com/sg/en/service/?pt=1&lat=1.2800945&lon=103.8509490999999 8

Maybe you are looking for