TS3276 my server went down and now my email is not working, can anyone help please?
My website server went down and now my email is not working (though the server is back up)
Does anyone know what I need to do?
I'm told by my website hosts that I need to 'reconfigure authentication" but I have no idea how to do this, they are now closed for the weekend and I need it fixed before Monday morning. Could anyone tell me where to find step by step instructions. I've tried but have made matters worse and the couple of mail accounts that WERE still receiving email are now also not.
Help please!
Hi Eyen80,
If you are having issues with your iPhone’s camera not functioning, you may want to troubleshoot using the steps in this article -
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Specifically -
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Thanks for using Apple Support Communities.
Best,
Brett L
Similar Messages
-
My server went down and now that it is back up it will not load my aol and gmail accounts mail help. What steps do I do to make this happen?
Hi there MeganElizabeth02061999,
You may want to check your past purchases and see if you can find the tracks there. Take a look at the article below for more information.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
-Griff W. -
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
i have tried to update my i.phn 3g from 4.1 to 4.2 but it failed and then i tried to restore then its also failed,,now my device is not working,,,can somebody help me?????
No one can help you without knowing the error message and error number when it fails.
-
I have an Ipod touch and cannot take it off headphone mode, Can anyone help please.
I have an Ipod touch and cannot take it off headphone mode, Can anyone help please.
Thankyou- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
i purchased 2 weeks before i phone 5 but there is problem with sleep and wake up button its not responding can anyone help me in this issue.
You have a one-year hardware warranty & 90 days of free phone support. Take advantage of it, make an appointment at an Apple store or call AppleCare.
-
Problem with RAM and slowing of computer when using CS5 can anyone help please?
Hello I am having big problems at the moment with a slow computer when I am using Photoshop CS5 I am informed that I am low on memory. I do not store any photographs on my computer they are all on an external hard drive, the only image on the computer are the ones I am working with. I have been in touch with Norton who think it is an Adobe issue can anyone help please, looking forward to hearing from you and to a swift fix of the problem
Best wishes
SheilaHow much memory do you have installed, and what operating system are you running?
Mark -
hi my daughter has disabled her iphone 4 and its never been synced with itunes can anyone help please
iOS: Forgotten passcode or device disabled after entering wrong passcode - http://support.apple.com/kb/ht1212 - Learn what to do if you have forgotten or can't remember your passcode, or if your device displays a message saying it is disabled.
-
my phone was not working only the restore button was available so i restored it and they told me i have to update my iphone 5s as well. i waited till the end the update software was downloaded successfully but then the iphone restarted by itself and now its not working. the iphone screen is shown the picture when you first time open the phone to connect it to an itunes. i connected it by it not working, i restart everything still not working:( i need help asap please. thankyou
it seems like apple's activation servers have gone down under the weight of the overwhelming amount of activation requests. you will be able to activate your phone once the servers are able to catch up with the activation requests.
-
I have several Apple products, some eligible for iCloud and some not. I was using MobileMe and elected to keep my email address after June 30. I moved to iCloud and everything seems to be working except for my MacBook that couldn't be upgraded to Lion so not eligible for iCloud. Now my email doesn't work on that machine. What's wrong?
Welcome to the Apple Community.
Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
Entering iCloud email settings manually in Snow Leopard or Leopard
Entering iCloud email settings manually in Tiger -
My i-phone wont turn on and I don't know why, it went off all of a sudden even thought the battery was half charged, I've tried holding the power and home buttons to reset it but that hasnt worked, I don't know what else to try, can anyone help?
Charge it for 30 minutes with the wall charger, then hold the HOME and SLEEP buttons at the same time for up to 30 seconds. If nothing happens your phone is probably broken.
-
Hello, I upgraded my laptop from Snow Leopard to lion, unfortunately I have a 2 music programs that no longer work. one is called the Music PadPro, which is now gone bankrupt, can anyone help?. I was talking to the Apple Store earlier and they said if I upgrade to the mountain lion it may help but I'm not so sure,
kind regards
NigelThere's no reason that upgrading from Lion to Mountain Lion would make this application work. I've looked up Music PadPro. I don't know much about it, but it looks pretty old. Here are the requirements:
Macintosh G4 or higher processor running Mac OS X Version 10.2.6 (minimum),
Mac OS X Version 10.3.2 (recommended), or Mac OS X Version 10.4.2.
Looking at that, I would guess that the application would require a PowerPC processor. After the release of the Intel machines back in 2006, Apple included something called Rosetta within OS X. This allowed programs developed for the older architecture (PowerPC) to run on the newer Intel machines. The reason for this was to give developers some time to upgrade their applications to run natively on Intel processors. It was only with the introduction of Lion that Apple pulled Rosetta from their OS. They had basically given developers about five years to upgrade their applications. Unfortunately, in your case, the developer went belly up. You can always install an older version of the OS on either a separate partition or an external drive and you can run your program from there. -
I got an iPad 2 and I cannot get my pictures to upload from a micro sd card as the iPad is saying device not accepted using too much power. Can anyone help? My iPad 2 is a 16 gb and my micro sd card is 4 gb
You can use a USB flash drive & the camera connection kit. First download the pics to your computer.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
Cheers, Tom -
Hi. I have had a mac for many years now and suddenly iv'e been infected with pop ups, redirections and adverts which are very annoying.
Can anyone please advise how i can clean this up to get back to my many happy years browsing with Safari?
Thanks
AndyClick here and follow the instructions, or if desired, download and run Adware Medic. The second link is a direct download; if you're unable to download it, see this page.
(116113) -
Hi everyone
I need help?
I bought my MacBook pro 17" in may 2012 and I've only used it for iTunes and to surf the net.
I gathered that I wasn't really using it to its full potential. I'm selling it now and wanted to restore it.
I think I've pressed command a r and reloaded lion on to it.
The problem is it still has my account info and I was hoping that would put it to its factory settings.
I logged on and now safari won't load up.
Please can I have some help never had a mac before all I want is to set it too factory settings please.Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Maybe you are looking for
-
MacBook Pro won't turn on without pressing 'ctrl' & 'cmd' with power button
As title says. I have no idea why. When I press the power button nothing happens at all - no lights, no fans no video. Pressing the ctrl & cmd buttons at start-up is the only way it will turn on. It's a 2008 2.5 GHz Intel Core 2 Duo running 10.6.8. I
-
i am new on jdeveloper. i can define objects in model. i can define objects in view controller. but i can't use model-objects from the view controller. what is the right way to do it?
-
Photoshop CS5 crashes when trying to print. I recently updated to Mac OSX Mavericks. Help?
Photoshop CS5 crashes when trying to print. I recently updated to Mac OSX Mavericks. Help?
-
Using new wired keyboard (w/o numeric keypad) with Windows Vista
I have a 2008 Mac Pro and a Windows PC. They share the same monitor, keyboard and mouse via a KVM switch (I use the Belkin Flip DVI-D KVM Switch, model F1DG102D). My keyboard is the Apple wired keyboard with numeric keypad, which works fine with my W
-
Flash keyboard's microcontroller?
Hello, I wanted to add custom combinations with the Fn key to control mpd, but I didn't success. For exemple, fn+del gives me a normal del, fn+F11/F12 is like I didn't pressed something. I checked on wikipedia and I read that: Unlike other modifier k