TS3297 I have installed, reinstalled, repaired, retarted and followed all trouble-shooting tasks; Now I am getting "Apple Supprt Application not found: error 2(Windows 5). Please uninstall and reinstall itunes. I have done that. It is listed in my progra
I am trying to install itunes on my computer (Windows Vista). After initial instillation I got an error 42404 A required itunes componenet is not installed; please repair or re-intall itunes and error 50, cannot access itunes store at this time. Please try later. I have done that multiple times; uninstalled all components, reinstalled all components, repaired all components, restarted my computer. I have changed firewall settings to allow acess to all of the apple components. I have made sure the required ports are open. All of the components are showing on the installed programs section of my control panel.
I am now getting an error message that says that Apple Support Application is not found error 2 (windows 5). It is listed in the installed programs and I have repaired it.
I am out of options. And help would be appreciated.
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?
Similar Messages
-
I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7
I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7
-
My new 4S iphone is not showing in itunes and have followed all trouble shooting tips. It does show in iphoto and wants to download photos. Any suggestions???
I've tried a lot of the stuff mentioned at that link and elsewhere, modifying host files etc. trying to downgrade my iPhone 4 back to 5.1.1 no luck , apple has locked up 5.1.1 for my phone and iPad . one post said I'm "stuck with iOS 6" darn I should have been more careful. I have the 5.1.1 Ispw on my MacBook its a permissions thing I don't understand. I'll post when I find a way around it and I will . iOS 6 took away most of my AirPlay functionality . to hek with iPhone 5 I'm starting to look at android. big bummer apple
-
I am trying to update my iPod touches and keep getting an error message saying iTunes could not back up my iPod because a session could not be started. I have followed all trouble shooting advice found on the apple website, unplugged and replugged the device, restarted my computer, etc. Any suggestions would be much appreciated. Thanks
I have the same issue, except I can't even sync.
-
i have a problem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,
If you already have IIS web server running, you need to run the LabVIEW web server on a different port to avoid conflicts. It probably won't start because the port 80 is already in use.
Check options.."Web Server: Configuration" within LabVIEW.
LabVIEW Champion . Do more with less code and in less time . -
Ok so I went to update my itunes 9 to itunes 10.5 and now I get and error message "Apple application support was not found" error 2 (windows error 2) when ever I try to run itunes and iv been trying to fix this for like a month and let me tell you iTunes for windows is **** and I really want Icloud for my iphone 4 and yes iv tried uninstalling everything by apple in the correct order and reinstalling them after restart atleast honestly 20 - 30 times but nothing worked so if anyone can please help me I have windows 7 and a hp intel pentium computer
Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
tt2 -
HI, I installed Itunes on my computer. When i wanted to open the application, it gives error "Apple Application Support not found" "Error 2 (Windows error 2)"
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if a component such as Apple Application Support won't install normally.
tt2 -
How do I get past the drivers not found problem during Windows 7 install?
I have a brand new (March 2012) MBP running Mac OS 10.7.3 (Lion) with a SuperDrive. I'm trying to use Boot Disk Assistant to install Windows 7 with a valid Windows 7 DVD burned from an .iso. I've partitioned the 750 GB HDD with 500 GB for Mac OS and 250 GB for Windows. The system reboots and starts to install Windows 7. Then it pops up an error:
"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.
Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step."
Of course, I can't eject the Windows setup DVD because the eject button doesn't work so I can insert the Windows Support Software that I downloaded from Apple. So, I copied the Windows Support Software to a USB drive.
Once I get to this point, I can browse to the USB drive and I get the following file tree:
Drivers
Apple
x64
Asix
Atheros
ATI
Broadcom
Cirrus
IDT SigmaTel
Intel
Chipset
All
ia64
Lang
Chip
(various languages)
WIN7
x64
Marvel
NVidia
NVidiaChipset32
Ethernet
NAM
HDAudio
SMBUS
SMU
NVidiaChipset64
Ethernet
NAM
HDAudio
SMBUS
SMU
Win7_32
Win7_64
RealTek
The only directory that the installer recognizes as having valid drivers is the Intel > Chipset > WIN7. When I select all of the drivers listed, the installer acts like it's installing something but then it stops saying that new devices were not found. I can't get past this point. The Windows 7 installer will not continue. If I select any of the other directories, I get the message "No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK."
Any thoughts? Admittedly, this is the my first experience dealing with Mac OS and I'm completely out of my league. However, this is a Windows installation issue and I'm getting hung up on device drivers. Usually in the PC world, I can easily go to the manufacturer's website and just download the drivers I need directly.
...Mel
Sr. Systems Administrator - Windows, SharePointvalid Windows 7 DVD burned from an .iso.
Usually burned ISO to DVD only works when burn speed is set to slowest.
Otherwise there are a number of problems with the install failing to do proper install, sometimes not even booting to start the install. Trouble is from using Apple Disk Utility. Burned in Windows, the ISO will be fine. Using Disk Utility at slowest has become "try reburn again at reduced speed."
You can use mouse on startup to eject DVDs but what you want is your drivers later after Windows is installed, and have them on USB flash or something.
you don't need any drivers except in a few cases (MacBook Air that lacks DVD and uses USB-DVDs)
Product support page is best place to start with every device and product.
www.apple.com/support/bootcamp
has manual pdf, faq, how to, support articles -
I have had my laptop for about 5 or 6 yrs. I have had iTunes on it since I have had it. All of sudden my iTunes has stopped working. I am receiving an Error 6034 message. What has happened? I uninstalled it and tried to reinstall but did not help. I am still getting the message. I am not having any problems with it on any of my other devices. Thanks for any help that anyone can give me. mproffitt
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
The odd thing is the printer works, but the scanner isn't recognized.
I ran the latest Mac software update first, and then reinstalled the HP software. I checked all the settings as suggested from the HP site, but nothing seems to work.
Has anyone had this problem and found a solution?
Thanks
StevenThe odd thing is the printer works, but the scanner isn't recognized.
I ran the latest Mac software update first, and then reinstalled the HP software. I checked all the settings as suggested from the HP site, but nothing seems to work.
Has anyone had this problem and found a solution?
Thanks
Steven -
New Surface Pro 3 running windows 8.1 (works with Windows 7). Firefox 34.0.5 is browser. Cannot access my website only. Have cleared cache. Works with Internet Explorer.
Thank you. Since the website can be accessed by other browsers (Internet Explorer), I believe the problem likely is in Mozilla's configuration settings--I just don't know how to fix them!
-
How can I fix this?
See if there is a solution found on the Frequently asked questions about viewing and syncing video with iTunes and iPod website.
-
I have put Ipod in restore mode and about 1/2 way through download it goes back to message "disabled type in passcode" ?? I have turned off all security and tried all trouble shooting ideas, any suggestions?? besides paying $$$$ to apple tech support
What appears to be happensin is that before the actual download finishes/restore starts. the recovery mode is timing out. I would do a manual download using the instructions here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Then place the iPod in Recovery mode and restore using the instructions in the link. -
Re-installing itunes Error message Apple application software not found error 2
I am re-installing Itunes on my home computer at itunes request.
I am getting an error mesage that apple applicatin software not found Error 2With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I upgraded to OSX and lost all my photos from Ilife acan I get them back
I upgraded to OSX and lost all my photos from Iphoto, can I get them back.
Are you sure, you are viewing the correct iPhoto library? iPhoto may have created a new Library.
Hold down the alt/options key ⌥, while you double click iPhoto to launch it. Is there more than one Photo Library in the panel that opens? Then try the other libraries, if your photos are in there.
Regards
Léonie
Maybe you are looking for
-
Hi can anyone help or point me in the right direction. I am developing an event management system, part of this is the dynamic creation on name badges which will be printed at the events. I want to do this by exporting all the data as XML then loadin
-
I lost all my songs with iTunes mach after changing store
hi, i have two itunes accounts, one on the french store, my first one, and another on the US one. i subscribed to itunes match with the french account, and when i went on the us one, i lost all my songs for three months! i need my two accounts, i liv
-
All of a sudden, I cannot create any new groups within Address Book! Will not work either from the plus sign at the bottom of the group list or the main menu! Any advice on how to resolve?
-
What does the iCloud with a phone number beside it mean when I pull my screen up on safari?
when I press the + button on the bottom of screen on safari, I see a little iCloud with a phone number beside it that is not mine. what does this mean?
-
Can you make mp3's show up as a Podcast?
I missed a couple of podcasts in a series I subscribe to and I DLed them from the Podcast's website (one is an mp3 (audio) and two are mp4's (video)). They go into the Music section of iTunes of course. It would be so much nicer to have these episode