TS3297 updated itunes, and was then unable to open and purchase additional music.

Updated itunes and now unable to open.   have ipod classic version 7 years old.    |Now what can I do|?

Try deleting iAdCore.dll from within C:\Program Files\iTunes or C:\Program Files (x86)\iTunes then running a repair of iTunes from within the Programs and Features Control Panel.
If that doesn't work see Troubleshooting issues with iTunes for Windows updates. You may need to tear it all down and reinstall as described in the second box.
tt2

Similar Messages

  • I run windows 7.  Since updating itunes, I have been unable to open itunes.  I have uninstalled and reinstalled, and have chosen to run a administrator.  Itunes icon now displays a shield with yellow

    I run windows 7.  Have been unable to open itunes since updating last week.  I have uninstalled itunes and reinstalled, and have checked run as administrator, but still can no open.  I notice that there is now a shield with yellow and blue squares next to it, that i do not think were there before.

    many thanks, Mary.
    The ModName is ituneup.dll; the modver is 1.0.7.0.
    Do you have the TuneUp plugin installed for your iTunes? If so, I think your copy is causing the issue here. Try the following document:
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    ... does that help with the launch errors?

  • I just went to open itunes, and it says 'unable to read itunes.itl because it was created by a newer version of itunes'.  I googled it, someone said to change the 'itl' to 'old', so I did.  I was then able to open itunes, but there was no music in there.

    I just tried to open itunes on my Macbook, and it says, "the file ituneslibrary.itl cannot be read because it was created by a newer version of itunes.  I googled it, and someone suggested to change 'itl' to 'old', which I did. I was then able to open itunes, but nothing was there of my library.  Have I lost my entire itunes library?  Please say it ain't so ...

    Hi,
    By changing itl to old you made iTunes create a new blank library.
    You may be able to use a previous iTunes library which are created when you update itunes. Therefore delete the current itl file, go to previous iTunes library folder, select the one that is most recent one before you made updates to iTunes. Move this to replace the one you moved to trash. Rename to iTunes library.itl then open iTunes.
    Jim

  • TS3694 I am unable to view My Wish List on the ITunes Store After installing the updated ITunes. It shows an Error -1202 and says try again later. But it never works.

    I am unable to view My Wish List on the ITunes Store After installing the updated ITunes. It shows an Error -1202 and says try again later. But it never works.

    Hi Jen.  My daughter just compleated her nursing program and is now working as a full time nurse.  Focus and study hard and soon you will be there too.  Now to the problem at hand.  I have the same problem.  I gave up on it and satisfied myself with my iPod without the upgrade.  Reason being I've read so many posts of people having problems after the upgrade.  But I'm sure other factors are involved.  Nevertheless here is the fix most say works to solve the problem:  What ever virus protection you have installed on your computer, disable it.  Then try to install the update. After that enable the protection. I had Kaspersky, and it does it's job well. The thinking is, the virus protection is blocking the upgrade.  Hope this works.   Charlie

  • When I move my mouse Itunes stops playing. This was happening before I installed latest version. I have installed latest version three times. First and install, then as a repair, and third time I unistalled Itunes and reinstalled i.

    when I move my mouse Itunes stops playing music. Sometimes this happens immediatly and sometime it take 10 to 15 sec. I tried playing Itunes and then tabing another program but same result. If I click on play and do not move mouse Itunes works as usual.. This was happening before I installed latest version. I have installed latest version three times. First and install, then as a repair, and third time I unistalled Itunes and reinstalled i.

    when I move my mouse Itunes stops playing music. Sometimes this happens immediatly and sometime it take 10 to 15 sec.
    At various stages over the years, mouse-related iTunes trouble has been associated with driver conflicts. So it might be worth following up on that possibility.
    Head to the drivers and downloads page for your model of PC, and check to make sure you're not behind on any chipset and input-device-related driver updates. (And while there, just in case, also check to make sure your BIOS, sound-card/integrated audio, and video-card/display-adaptors are up to date.)
    If you're behind on anything, and you update, does that help with the mouse-related iTunes issues?

  • Cant put pdfs or music on.the message i get when itunes comes up is "iTunes was unable to load data class information from sync services.reconnect or try again later." and its just my itouch i tried another one and was able to put songs and pdfs on it...

    I cant put pdfs or music on my itouch,it wont sync.the message i get when itunes comes up is "iTunes was unable to load data class information from sync services.reconnect or try again later." and its just my itouch i tried another one and was able to put songs and pdfs on it...please help!

    Try here:
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    If not successful see the previous discussion on the right side of this page with the green checkmark.

  • We have a Dell computer with iTunes (which we have had for years) and are suddenly unable to open it.  The message: This file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes.  Help!!

    We have a Dell computer with iTunes (which we have had for years) and are suddenly unable to open it.  The message: This file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes.  Help!!

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • I connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone.

    i connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone. what should i do.?

    First, you do not have a 3G if you could upgrade it to 6.1.3, because 4.2.1 is the last version that will work on the 3G. So you either have a 3GS or you somehow hacked the phone to install an incompatible version. You can check the model you have by entering your serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do
    Assuming you have a 3GS the most likely reason for your problem is you have a gray market phone that was hacked or jailbroken to unlock it. When you upgraded it you removed the hack, so the phone is now locked to its original carrier.

  • Hi, I was wondering if someone could help me, I recently restored my itouch 4th Gen and was then told to upgrade to itunes 10.6 now everytime I try and install itunes I get the following message, help please!

    Hi, I was wondering if someone could help me, I recently restored my itouch 4th Gen and was then told to upgrade to itunes 10.6 now everytime I try and install itunes I get the following message, help please!
    Error writing to file: C:\Program\Files\iTunes.Resources\de.Iproj\SortPrefixes.plist.   Verify that you have access to that directory.

    Error writing to file: C:\Program\Files\iTunes.Resources\de.Iproj\SortPrefixes.plist.   Verify that you have access to that directory.
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    Vista instructions in the following document: Check your hard disk for errors
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • I updated itunes to version 11.0 and now it will not open and says it is corrupted?

    i updated itunes to version 11.0 and now it will not open and says it is corrupted?
    how do i get it to work it updated fine then asked to restart comp so i did now it will not open

    Let's try a repair install of iTunes first.
    Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
    Can you launch your iTunes now?

  • During an app update it froze and has said waiting for 2 days and I am unable to open or delete

    During an app update it froze and has said waiting for 2 days and I am unable to open or delete. How do I recover my app?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
    http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
    Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    Delete the app and redownload.
    Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
    http://support.apple.com/kb/ht2519
     Cheers, Tom 

  • HT201210 I updated iTunes on my Dell Inspiron lap top and it corrupted my iTunes. I uninstalled all of the newly installed files.  I also uninstalled iTunes.  Now whenever I try to install iTunes, I ge a message that saya, "An Apple Application support is

    I updated iTunes on my Dell Inspiron lap top and it corrupted my iTunes. I uninstalled all of the newly installed files.  I also uninstalled iTunes.  Now whenever I try to install iTunes, I get a message that says, "An Apple Application support is required to run iTunes on this computer. Please uninstall iTunes, then install iTunes again."
    Tried it 2 times and no luck.  Any advice for me?
    Maureen

    I get a message that says, "An Apple Application support is required to run iTunes on this computer. Please uninstall iTunes, then install iTunes again."
    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • TS1717 since updating itunes yesterday I now can't open it and get a pop up box about the procedure entry point not being located. anyone able to help?

    since updating itunes yesterday I now can't open it and get a pop up box about the procedure entry point not being located. anyone able to help?
    these are the boxes that open up:
    I am unsure as to wether I need to unistall and start again but then worry about the vast amount of songs already in the folder that I would have to reload.

    anyone able to help me with the above?

  • TS3276 Sent a 22 MB file and since then unable to receive e-mails and the file keeps "ghosting back" to my recovered messages folder. Help!

    Sent a 22 MB file and since then unable to receive e-mails and the file keeps "ghosting back" to my recovered messages folder. Help!

    thanks for your reply. I appreciate your taking the time to respond.
    yes, I thought my limits were 20 MB, but I let my client talk me into trying to send it anyway (won't be doing that again). I actually spent some time with the apple tech support person (who was awsome!) and he had me delete some files from my mail folder in the Administrator folder and changed some settings in my mail prefernces.
    Everything is working fine now.

  • Photoshop CS6 keeps crashing. I am using a brand new IMAC, I have 16GB RAM recently updated as it was running slow with 8GB and lots of hardrive space. When it crashes, i lose all my presents and it changes my preferences, it also fails to save or produce

    Photoshop CS6 keeps crashing. I am using a brand new IMAC, I have 16GB RAM recently updated as it was running slow with 8GB and lots of hardrive space. When it crashes, i lose all my presents and it changes my preferences, it also fails to save or produce a recovered file despite settings asking it to do so every 5 mins now. When i try to report the problem, it says it has found an issue and gives me a link to a solution....but wont let me click on the link.... PLEASE HELP! It's killing my productivity.

    If the crash started right after you added RAM, it could be a bad Ram dimm. You can try this - change the amount of RAM in Photoshop to 4G, this should stop Photoshop from using the higher ram. If it doesn't crash, it's probably the ram. Or run a diagnostic app. You don't say when it crashes, what you're doing when it crashes - it there a pattern? Did it ever work on this computer? Did it work on your previous computer? Without a lot of data, it could be related to the new computer... What OS version? Did you recently update it? Have you updated Photoshop to the most recent update?
    Do you have any plug-ins loaded? Try restarting Photoshop, and immediately press & hold the shfit key to turn off plug-ins.

Maybe you are looking for

  • How do you insert another PDF document into an existing PDF page

    Here's some background.  I used to use Acrobat 5 (I know it's really old but it worked great for my needs, but it's time to upgrade).  Say I have an existing 1 page PDF document (an Invoice for example).  Sometimes in Excel I create additional suppor

  • Copy a service P.O. to create a new service purchase order

    I want to create a new service purchase order with items category D. However when I give ref. of some another purchase order the vendor and org. data fields become grey. How do I change these fields in new purchase order which I want to create? In ca

  • Conditional Upper Case formatting

    Hi there, I need to be able to format the first letter of a word upper case or lower case depending upon whether or not it appears at the start of a sentence. There must be a method of doing this using the String class. Any ideas folks? All contribut

  • Photo Stream: iphoto 9.4 still says mobileme account

    Trying to troubleshoot photo stream on macbook air (os 10.7.5 Lion) which doesn't sync with devices or imac. iPhoto preference panel "accounts" still shows mobileme instead of icloud, which I think may be the problem, but how do I change it?  My syst

  • Text error message in CS3

    Here is another strange error I just got: What does this mean? It happened when I hit command-A when editing text. I can type, but just not select all.