TS3297 When I try to open iTunes i get that this message "This copy of iTunes is corrupted or is not installed correctly.  Please reinstall iTunes."  I have downloaded the lastest version and it has not changed the message.  What should I do next?

When I try to open iTunes I get this message  " This copy of iTunes is corrupted or is not correctly installed.  Please reinstall iTunes." I have installed the latest version of iTunes and the message has not changed.  What should i do next?

Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now?

Similar Messages

  • IPod touch 5 was at half way battery life and then suddenly turned off and now it says that it has no battery. When i try to charge it, it says that it is charging but it isn't because it will not turn on. What should i do?

    I just was wondering how to solve this? If anything?

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod      
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    And try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I just installed Lightroom CC. When I try to open it, I get an error message: "An internal error has occurred.  Cannot create the required folder: ..."

    I just installed Lightroom CC. When I try to open it, I get an error message: "An internal error has occurred.  Cannot create the required folder: ..."

    Cannot create the required folder

  • After updating my MacBook Pro to yeosemite I want my old screen saver picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this

    After updating my MacBook Pro to yeosemite I want my old desktop picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this folder. It is in TimeMachine".

    Can you browse the Time Machine drive from Finder?
    If you can and you know where the picture was stored ie on your desktop you can browse through the folder structure to the picture copy it and paste it somewhere on your new install before right clicking it and 'set as desktop background'

  • HT1926 I have just updated itunes on my pc (widows XP) to the latest version. When I try to open it i get an error message saying the application failed to start because MSVCR80.dll could not be found. Not sure how to resolve this. Have tried to reinstall

    I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?

    try removing all itunes and all other apple program
    follow this link for more info. http://support.apple.com/kb/HT1923
    reboot ur window after uninstalling
    after that download the latest itunes setup and install.

  • When I try to open editor I get an error message that I am not connected to the internet (which I am) or my computer clock is set incorrectly (which it is not).

    When I try to open editor I get an error message that I am not connected to the internet (which I am) or my computer clock is set incorrectly (which it is not).

    This is normally to do with activation. You need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
    1. Adobe Photoshop Elements
    2. Serial number issues or activating my product
    3. Click on the blue button: Still need help? Contact us – then click the button marked “chat now”
    It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Ensure you have your serial number.
    Click here to get help now Contact Customer Care

  • When I try to open iPhoto, I get an error message that says it can't open the application because it may be damaged or incomplete.

    When I try to open iPhoto, I get an error message that says it can't open the application because it may be damaged or incomplete.

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    Happy New Year

  • When I try to open Firefox, I get an error message that begins "The procedure entry point ?CreateDrawTargetForCairoSurface@Factory...could not be located..."

    When I try to open Firefox, I get an error message that reads "The procedure entry point ?CreateDrawTargetForCairoSurface@Factory@gfx@mozilla@@SA?AV?$TemporaryRef@VDrawTarget@gfx@mozilla@@@3@PAU_cairo_surface@@ABUIntSize@23@@Z could not be located in the dynamic link library gkmedias.dll.
    My only option is to click okay in the Error Message Box, but Firefox will not open then.

    Do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
    *(32 bit Windows) C:\Program Files\Mozilla Firefox\
    *(64 bit Windows) C:\Program Files (x86)\Mozilla Firefox\
    *http://kb.mozillazine.org/Installation_directory
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 17.0.x: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://hacks.mozilla.org/2010/09/hardware-acceleration/

  • My 2014 version of InDesign disappeared from my dock. when I try to open it i get an error message

    my 2014 version of InDesign disappeared from my dock. when I try to open it i get an error message

    Hi [email protected],
    Please specify the error message that you are getting.
    Regards,
    Sheena

  • TS3297 when i try to open itunes store error comes up saying windows experienced a problem and program stopped working

    can some help me everytime I try to open itunes store an error comes up saying windows experienced a problem and program stopped working. Itunes opens this just happens when I go to the store

    Hello Ducati848,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Best of luck,
    Mario

  • I cant open pdf files...i will click on the file to be downloaded, then when i try to open it i get an error message "c:\Users\Owner\Downloads\"the documents name".pdf Application not found

    for example...i will go to a restaurant website that has a menu. to view the menu i first have to click on the downloadable menu pdf file...after i click on it, a window appears showing i have downloaded the file...but, when i go to open the pdf, i get that error message...completely unable to open pdf files that ive downloaded

    See:
    http://www.java.com/en/download/help/quickstarter.xml - What is Java Quick Starter (JQS)? What is the benefit of running JQS? - 6.0

  • I have itunes on my computor but when i try to open it i get an error message and it won't open

    i have itunes installed on my computor. i tried to open it last evening and got an error message that told me i needed to reinstall itunes.
    when i tried to download itunes i get a message that saysService Apple device (apple mobile Device) failed to start. Verify that you have sufficient
    privleges to start system services. what does this mean and how can i reinstall itunes

    most likey.Here is the new article apple has on it http://support.apple.com/kb/TS5376

  • When I try to update Photoshop I get a fail message what is the problem?

    I cannot update Photoshop or InDesign, I keep getting a Fail message. What is the problem?

    Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • When i try to open itunes its telling me to redownload it and the entry point can not be located

    i try downloading the new softwear and once i did it told me ("the procedure entry point AVCPlayerItemDurationChangedNotification could not be located in the dynamic link libary AVFoundationCF.dl"l  ()"ITunes was not installed correctlly. Please reinstall iTunes. ERROR 7 WINDOW ERROR 7") PLEASE HELP ME I HAVE OVER 700 SONGS AND 40 IMPORTANT CONTACTS ...

    iTunes 11.1 is for your Mac or PC.
    Update the version of iTunes on your computer and try again.

  • Good Afternoon my computer had an unexpected restart while I was editing a picture in lightroom. Now when I try to open lightroom I get an error message stating " lightroom encountered an error when reading from its preview cache and needs to quit" Does a

    I keep getting an error message saying that lightroom encountered an error while reading from its preview cache and needs to quit. Can someone please help me fix this.

    Have a look at this previous thread: Re: "Lightroom encountered and error when reading from its preview cache and needs to quit"

Maybe you are looking for

  • BW hierarchy variable not working in Crystal Report 2008

    Hi, I have created BEx 7.0 report which has hierarchy on 0customer object, the report is working fine whith hierarchy variable. I have created Crystal Report by using this query as source. I have followed below link to create grouping to get data thr

  • Problem validating xml file - jaxb

    hi people, I'm working with jaxb to generate Java source classes from the .xsd schemas that I have. I work with 17 schemas that, a priori, I can't modify. In those schemas there are a lot of types and structures that I can use when creating an .xml f

  • How do you set up airport express to work as a bridge

    I have an existing wireless home office set up with PC's. I purchased the airport express to allow my g4 desktop to gain access to the wireless network, as it's set up in another room. The airport is not "seeing" the wireless network, do i need to ch

  • BPM 11g integration with UCM11g using Java Enbedded acitivity

    Hi Friends, Can anyone throw some idea how to integration with BPM11g and UCM11g We need to have a java code using Java Enbedded acitivity. 1) How to Connect to UCM 11g using java code any sample Java Embedded Code( we are connecting through RIDC) 2)

  • Problem of web service when upgrading to Flex 3

    Hi, We got a problem when upgrading our application from flex 2 to flex 3. The same webservice call code returns different results. In Flex 2 it works properly but in Flex 3 it only returns partial data. There is no fault or error returned in Flex 3.