TS3408 why will some websites which loaded fine before now not load - when other favourites load fine, and new searches are fine?  This only affects 2 websites, both of which were bookmarked.  I have removed them as bookmarks and this makes no difference.

why will some websites which loaded fine before now not load - when other favourites load fine, and new searches are fine?  This only affects 2 websites, both of which were bookmarked.  I have removed them as bookmarks and this makes no difference.

From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

Similar Messages

  • Toshiba HD worked fine with 2008 MBPro, but when I try to use with new MBAir, it says "read only" - how can I fix?

    I have a Toshiba external HD that I used with my old 2008 MBPro with no issues. I just got a new MBAir, and when I try to use the same Toshiba HD it will not allow me to write to the drive. The drive mounts and I can open files from it, but when I look at the info under Sharing & Permissions it says "You can only read." I'm not able to Verify it in Disk Utility either, as when I open it there all the Verify buttons are greyed out.
    I also noticed the drive format says Windows NTSF, which I don't understand since I was using it with a Mac before and have never used it with a PC. Do I have to reformat it to write to it from my MBAir? I have files on there that I don't want to lose, and the only PC I have available to me is at work.

    http://support.apple.com/kb/ht1274

  • Sharpener Pro 3 has problems in Aperture as the Pre sharpener continually asks one to buy or activate and the Output Sharpener causes Aperture to hang. Have removed all duplicate fonts and tried using a new user account. Any ideas?

    I am experiencing problems with Sharpener Pro 3 as an Aperture 3 plug-in. These are:  the Pre sharpener continually asks one to buy or activate and the Output Sharpener causes Aperture to hang. Following discussions with Nik Software I have removed all duplicate fonts and tried using a new user account. Neither of the courses of action worked. Have other users experienced these difficulties? Can you suggest an alternative remedy?

    I am experiencing problems with Sharpener Pro 3 as an Aperture 3 plug-in. These are:  the Pre sharpener continually asks one to buy or activate and the Output Sharpener causes Aperture to hang. Following discussions with Nik Software I have removed all duplicate fonts and tried using a new user account. Neither of the courses of action worked. Have other users experienced these difficulties? Can you suggest an alternative remedy?

  • TS3989 Why will some pictures not stream from iphone4s to ipad2,pictures taken before and pictures taken after have ,but some won't

    Why will some pictures not stream from iphone4s to ipad2,pictures taken before and after transferred ok but some won't.Any suggestions

        1.    Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
        2.    Photostream only syncs when the camera app is closed, ensure it is closed.
        3.    Photostream only syncs when the battery is above 20%, try recharging the device
    Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
    If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
    Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

  • When importing images into LR5 on my laptop, the photos all have a wide yellow streak through them. This only happens on the laptop; I can import the images onto my desktop LR and there isn't the streak of colour.   Can someone help?

    When importing images into LR5 on my laptop, the photos all have a wide yellow streak through them. This only happens on the laptop; I can import the images onto my desktop LR and there isn't the streak of colour.   Can someone help?
    This is happening even with photos that were taken on another camera, not just mine.  My daughter told me that the laptop recently fell.  The yellow streak is not anywhere else on the laptop, just on the photos in LR.

    I have had this problem on my desktop.  I have been attempting to reproduce it where it can be debugged. Here are some observations/facts in my environment--no conclusions:
    1. I do not import from camera or memory stick directly into LR.  I copy all images (using Explorer) from camera to two different locations (backup location first); and then my working area. In both cases, after files are copied I mark them Read-only.
    2. Poor observation, but in any event: the issue has only occurred when I do a large number of images. Its a poor observation as I have no exact number.  I suspect when I do less than 50 always works well every time.  However, I have also done some very large imports without issue.
    3. Error only occurs with my RAW images--for me that's NEF.  I have multiple cameras--those that only capture jpg images have never had an issue in LR.
    4. Even if the file is marked Read Only issues can still occur.  I then remove the image from the disk using LR -- and then manually (Explorer) copy in my backup image -- re import again and all is well.  I think one time I exited LR and replaced the bad file with a backup and restarted LR and all was well again.
    5. When it occurs I have performed a HASH value on the broken file and on the backed up file to determine if the file contents has changed--and each time the file contents has changed.
    6. I have had this occur immediately after import, but most often it occurs like this... import large number of images; Make changes in Development Module on random image, export jpg of changes--exit LR. Open up LR and file is corrupted.
    7. I have had this issue on multiple USB drives ( okay just 2 different drives have been tested ).
    What next--fire up Process Monitor and monitor the system (specifically LR) to see if it reports any file open for write access when this occurs.  So, far I have not had process monitor actually running when it occurs--one of these days.

  • I want to upgrade to snow leopard from 10.5.8. Im hesitant to proceed because I'm running iPhoto 7 and word 2004. I want to be sure these programs will still run and I won't lose my photos or the events I have ordered them by. Should i makea clone o

    I want to upgrade to snow leopard from 10.5.8. Im hesitant to proceed because I'm running iPhoto 7 and word 2004. I want to be sure these programs will still run and I won't lose my photos or the events I have ordered them by. Should i make a partition on my new Iomega external and clone it just in case? I'm running time machine and backing up all the time onto an old LaCie, and right now I have a copy of my iPhoto library on new Iomega, which I recopy every couple of weeks. I got the computer new several years ago and it came with iLife and 10.4 OS I think.

    Word 2004 is almost 10 years old, you will not be able to upgrade beyond Snow Leopard with it. IMHO you have gotten your money's worth out of the application and need to upgrade to Office for Mac 2011, this will work just fine and read your old files just fine too. What will not run beyond SL are all PowerPC (PPC) apps such as Word 2004. You will need to update, upgrade or replace any PPC based apps you want to use. I would recommend taking a little time and check for updates to each of your apps. Then open System Profiler (Applications - Utilities - System Profiler) click the Applications link on the left and then look for any PPC based apps, those are the ones that will not run. You can upgrade to SL just fine with the apps you currently have however if you want to go beyond SL (it's already 2 generations behind) you will need to update or upgrade your apps. You can take your time doing it but eventually you're going to have to begin

  • After installing FF 5.0 I am receiving a list of incompatible Add-Ons. I go into 'Extensions' and click to remove them, exit FF and lauch FF again, the same incompatible add-ons list appears. Is there a way to permanently remove the old Add-ons?

    After installing FF 5.0 I am receiving a list of incompatible Add-Ons. I go into 'Extensions' and click to remove them, exit FF and lauch FF again, the same incompatible add-ons list appears. Is there a way to permanently remove the old Add-ons?

    Thanks but I don't think this will help. Like I said, all of my add-ons were working fine and compatible until after running a previous version of FF. I am sure they are still compatible, but they are not working at all.
    I even checked my profile folder and all of the extensions' data is all still there but FF5 is just not reading it correctly. (like adblock plus... I see the folder for it but FF5 doesn't have it on the add-on manager page when I run FF5)

  • When I go to About This Mac and click on Storage it shows 421.93GB as Other. This only leaves 46.85GB of 499.25GB free. How do I find out what this "Other" is so I can remove the stuff I don't need?

    When I go to About This Mac and click on Storage it shows 421.93GB as Other. This only leaves 46.85GB of 499.25GB free. How do I find out what this "Other" is so I can remove the stuff I don't need?

    What kind of use do you make of your MBP?  A lot of photo or video?  If so, you may be storing a lot of large files.  Look at Finder and see what the file system looks like.  Do you have large libraries of data files associated with applications?
    You may want to think about an external hard drive to use for backups and data storage, you can point applications to the external drive as the default storage location.
    A good source of external drives at a reasonable price is the Mac specialist, OWC, http://www.macsales.com
    I bought their Mercury Elite Pro 2 TB dirve last September and set it up to use part for Time Machine backup and part for other work space.  Setup with Disk utility into two partitions is very quick and easy.  Just remember to format as Extended Journaled with GUID partition table.  Setting the partition sizes is by using a braphical image on screen in DU so it is like falling off a log, so easy.

  • HT1386 The first time I synced my iphone with my mac, I didn't realize that all of my photos from iphoto would transfer over to the phone.   Now, I need to remove some, as they are taking up too much space.  I cannot figure out how to remove them from the

    The first time I synced my iphone 4 with my mac, I didn't realize that all of my photos from the iphoto library would transfer over to the phone (more than 3,000).   Now, I need to remove some, as they are taking up too much space.  I cannot figure out how to remove them from the phone.  I tried to uncheck boxes and sync again, but I get a message that there is no room on the iphone.  I've read as many articles as I can find, but still cannot manage this.  Thanks for any help.

    Open itunes, connect iphone, select what you want, sync

  • I have an old MacBook (Mac OSX 10.5.8) with iPhoto '08.  Is there any way to back up not only the photos, but the way I have organized them into events and labeled them?

    I have an old MacBook (Mac OSX 10.5.8) with iPhoto '08.  Is there any way to back up not only the photos, but the way I have organized them into events and labeled them?

    Yes. Back up the Library.
    Most Simple Back Up:
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
    Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

  • Have iphoto 9.0 working on a mac osx 10.7.4 yesterday ilife with idvd was downloaded into my mac,i can't open my iPhoto now its telling me to update app, but when i do it says no new updates are available at this time,and iPhoto update mesg pops up again.

    Have iphoto 9.0 working on a mac osx 10.7.4 yesterday ilife with idvd was downloaded into my mac,i can't open my iPhoto now its telling me to update app, but when i do it says no new updates are available at this time,and iPhoto update mesg pops up again.

    Hi,
    I scoured the web looking everywhere for a solution to this.
    Exit Code 15
    OSX 8.5 with Work@Home DVD media for CS6
    I followed instructions to run 3rd party cleaner software
    I tried the adobe removal tool
    removing all copies of adobe software manually
    installing from a new account, safe mode, plist everything suggested that i found did not work.
    A colleague suggested that removing the below folder would allow the installation:
    /Library/Application Supports/Adobe
    They turned out to be correct, so i am passing this on, because this took far too many hours of my time.
    Cheers,
    Smokey

  • HT4929 I have os x 10.6.8. When I try to update it says there are no updates for my sytstem.  I want to get iCloud on my Mac Book Pro and one of the requirements is 10.7.2 how can I get this done?

    I have os x 10.6.8. When I try to update it says there are no updates for my system.  I want to get iCloud on my Mac Book Pro and one of the requirements is 10.7.2 how can I get this done?

    Welcome to the Apple Community.
    You can purchase Lion from the Mac App Store. You will need to meet the requirements for Lion, but the Mac App Store will tell you whether your Mac is capable of running Lion or not.

  • When i click on my ártists' tab on my iPhone 4S nothing shows up, I have edited them in ínfo' and everything. How do I get them to show up?

    When i click on my ártists' tab on my iPhone 4S nothing shows up, I have edited them in ínfo' and everything. How do I get them to show up?

    I believe this is more about the default settings of the pop-ups. I have tried the 3 methods above and they have not solved my issue.
    As I have stated before this issue is not happening with other web browsers.
    Mozilla is better compatible with the program I am running.
    It seems you know your way around Mozilla so pleas help.
    P.S. I have taken screen shots and attached them to a word doc so I could best illustrate my issue with commentary and arrows but it will not save to my post. I have even tried posting it as a PDF.

  • HT3702 Why I cannot purchase smurfberries in smurfs village as long as my credit card and bank account are fine ?

    Why I cannot purchase smurfberries in smurfs village as long as my credit card and bank account are fine ?

    Yoor post is very confusing. AOL's iPad magazine is called "Editions" and it's free. "The Daily" is put out by TheDailyHolding and is owned by Rupert Murdoch. You've already posted in another thread where the solution was given. Other people seem to have manged to get unsubscribed.
    Best of luck.

  • Why will the front camera on my iphone 4 not work? On both the camera and snapchat.

    Why will the front camera on my iphone 4 not work? On both my camera and snapchat

    Hi there bananas321,
    You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    -Griff W.

Maybe you are looking for

  • PDF only opens in 64 bit of AI

    Hey all, I've had a few PDFs come in that can only open in the 64 bit version of AI. The problem is that we have a script that runs and interacts with AI, that only works with the 32 bit version. Does anyone have any ideas what could cause the .pdf t

  • I tryed the phone in a Bowl of water to check for waterproffness

    So as the title says i tried it because i want to take a few pictures when i go swimming in a pool. It worked perfectly but like 2-3 hours after it some condensation appeared on both of the cameras and they wont go away. after that i found my phone s

  • Summit_rewritten_11g_oct_2008.zip : using 11.1.1.0.0 or 11.1.1.0.1

    hi Please consider the application in summit_rewritten_11g_oct_2008.zip, described in redeveloping_forms_in_adf_11g.pdf, titled "Case Study: Redeveloping an Oracle Forms application using Oracle JDeveloper 11g and Oracle ADF 11g" see http://www.oracl

  • Hardcoded values within XML tags

    Inorder to generate an XML file, is it a requirement to have all the data in the database? For example, if I do: Select 'MyValue' From Dual -> it will return me with MyValue. Essentially, this is hardcoding values. Is this achievable using sql to gen

  • CUIC report user issue

    CUIC report showing no Agents with the user logged in ... CUIC report showing No Agents, i have given all the rights to the user which is generating the reports but No success, only one user can view all the agents available.... Any Help would be app