TS3694 error code 1600

how to fix error code 1600

Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

Similar Messages

  • TS3694 trying to restore my iphone 4 and it gives me error code 1600 screen is black and is in recovery

    unable to restore my iphone 4 screen is black and gives me error code 1600! how can i resolve this issue?

    Sounds like your iPhone is stuck in DFU Mode. Try this, open iTunes on computer. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Click the Restore button of iTunes. If still problem, you may need to search the Web for help of DFU Mode Loop.
    Here are the Steps to fix Error 1600 directly from Apple:
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

  • I have recently installed the new software on my iphone 4s - Error code 1600

    Please does anybody know....
    I have just installed the new software update on my iphone 4s soon after it my phone kept turning itself off then it wouldnt come on at all so i connected it to my mac it said my iphone was in recovery mode so needed to install new software.... i waited for 10 mins roughley then at the very end it said cannot install update then it came up with - unknown error code 1600.
    Does anyone know if i can fix this from home or do i need to take it into the shop?
    Many thanks.

    You can use the iPhone version of YouTube or Jasmine
    http://itunes.apple.com/sg/app/youtube/id544007664?mt=8
    https://itunes.apple.com/sg/app/jasmine-youtube-client/id554937050?mt=8

  • TS3694 error code 3914. Does anyone know how to solve this problem? My ipod touch is stuck in recovery mode. would be grateful of any help.

    Ive been trying to restore my ipod touch and it comes up with the error code 3914. Also, the ipod is stuck in recovery mode. Can anyone help?

    http://support.apple.com/kb/TS3694#error3194
    I realize you already saw this knowledge base article, but you need to read it more carefully.

  • TS3694 error code 3194 when trying to restore my ipad?

    error code 3194 when trying to restore my ipad?

    Hey bfcjamie,
    Thanks for the question. Error 3194 usually occurs when iTunes is unable to communicate with the update-and-restore server. The following articles may help to resolve your issue:
    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
    http://support.apple.com/kb/TS4451
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    1. Install the latest version of iTunes.
    2. Check security software and ensure that communication to gs.apple.com is allowed. Follow these steps for assistance with security software.
    3. Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow the advanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    4. Try to restore from another known-good computer and network.
    5. If the errors persist on another computer, the device may need service.
    Thanks,
    Matt M.

  • TS3694 error code 6?

    I receieved an error code (6) as I was updating to IOS 7.. what do I do?

    Hey oysta81,
    Thanks for the question. The following article outlines error 6:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, 9006
    1. Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
    2. There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    3. Verify that access to ports 80 and 443 are allowed on your network.
    4. Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
    5. Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
    6. Restore your device while connected to a different network.
    7. Restore using a different computer.
    Thanks,
    Matt M.

  • TS3694 error code 3014 ,can anyone help , iphone 3gs is stuck in recovery mode

    hi can anyone help me ...my son gave me his 3gs and i have tired to restore it itsstuck in recovery mode ...error code 3014

    Top hit on google: http://support.apple.com/kb/ts3694
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.

  • TS3694 error code 3014 after backing up stage of installing ios6

    whilst trying to load ios 6 onto my iphone 4 as backup is completing error code 3014 comes up this has happened 3 times now?

    Check this support document http://support.apple.com/kb/TS3694 and expand all sections. Look for error 3014 and you will see it happens to deal with contacting the Apple server to verify the upgrade. Try connecting to iTunes via the computer and cable and see if that will fix your problem.

  • TS3694 Error Code 40 problem.

    The other day my dad's iPhone 5s went into recovery mode for some strange reason and every time I try to take it out of recovery mode a error code pops up (error code 40) and I have no idea how to fix it. PLEASE HELP!!

    What happens when you tried steps listed in the Support Doc. where you posted you query ?
    http://support.apple.com/kb/TS3694#10
    If Restore in iTunes fails: It could be hardware failure.

  • TS3694 error code 3014

    need some help with this error code pls ?? my ipod touch will not charge properly on its docking station and when i put it on itunes to restore it comes up with this error code 3014

    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.
    and maybe:
    HT4061 error message 3014.: Apple Support Communities

  • TS3694 Error code 3014, not explained although in heading.  I could not update my iphone to OS6 as received 3014 error.  Please explain or help

    Hello, received error code 3014 when updating my iphone software to ios6.  Click on help error code but nothing was displayed.  Can anyone tell me what the code mean and how I get my iphone updated?

    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.

  • TS3694 error code 17

    I was able to get a Ipad Air, and after update it been in reset mode with error code 17?? any help

    Resolve iOS update and restore errors - Apple Support

  • TS3694 error code -5000

    Has anyone had this update error code in iTunes when updating their IOS ?

    Is this a third party screensaver? I can't find anything about an error code -5000. Are you sure it is a screensaver for OS X?

  • TS3694 Error codes 11, 2005, 1601 keep poping up when i try to restore my ipod touch 2nd gen.

             Everytime i try to restore my ipod touch 2nd. gen. i get one of three error codes. (11,2005, 1601)  I have done many things to help make it work and nothing has.  Can anyone help me please also i have windows Xp

    You found the answers, they are in the article which you posted your question from.
    Go back there and read it... then do as it says to resolve the issues.

  • TS3694 error code -25170 when trying to sync nano and ipod to itunes

    cannot sync nano or ipod with itunes,,,keep getting error code -25170 cannot sync...any ideas

    Have you tried rebooting the Mac?
    Is there any other information given in the err0r message besides the number -25170?
    I could not find any information via Google for the error number.

Maybe you are looking for

  • Is there a restriction to install ODBO driver on Windows Server 2008 64bits

    For SAP BusinessObjects Business Planning and Consolidation (BPC) version 7.5 Microsoft it is possible to connect with Xcelsius using an ODBO provider installed on the BPC server. In the installation Guide for BPC it is specified the need to add foll

  • Union All slow with order by

    I have 2 queries that I do an "union all" and then an order by after the "union all" This seems to be extremely slow. But when I run the queries individually, they are really fast. Could some help me out with this please. SELECT *   FROM (SELECT a.*,

  • "Always on TOP"option for my window

    Hi All I am developing an application in which I wanted to develop a facility for enabling "always stay on top" to one of the windows .How can I do this. Thanks in advance Haritha

  • Merge tdms file

    Hi, is there an easy way to merge a set of tdms-files (with same structure) to one file? For example: Measurement1.tdms Measurement2.tdms Measurement3.tdms to  Measurement.tdms

  • BDC help req??

    Hi Can any one tell me to use 2 BDC simultaneously at a time in 1 single report. I had an req like to make a BDC for  MIGO & same time after its done the BDC for Tcode J1IEX has to be called,so can any one tell me some info for it. As its a reprot pr