TS3694 hi my iphone is not letting me update it say phone could not be restored and its staying on connect itunes

so it you can help me thanks

I did put it in DFU mode but its still not working, although everytime it shows your iphone needs to be restored. Kindly help.

Similar Messages

  • HT1222 Can not do this update. Says I am not connected to Internet but I am.

    Can not get security update. Keeps saying I am not connected to Internet but I am

    Check your router settings and see if you have Wireless QoS (WMM) enabled? If so, diable it. This fixed my problems, and had the benefit of speeding up my wifi in the process.

  • Apple tv not letting me play movies saying HDCP playback not supported

    Apple tv, go into netflix try to play movies, wont let me say's HDCP playback not supported. Called netflix tryed various things, they believe it's the apple device itself, tryed to contact apple of course you have to buy $35 pkg for support , so now I don't want to pay that I would rather just go buy another apple tv which would cost my $100 but would I still have the same issue?

    Welcome to the Apple community.
    The first thing to check is that your TV is HDCP compliant. If you are sure that it is:
    Check that the HDMI cable is correctly seated at both ends.
    Try disconnecting the cable and connecting it again.
    Try another HDMI cable.
    Try the Apple TV with another TV

  • My MacBook Pro has Mac OSX 10.5.8 and will not let me update any further. Why?

    I have a MacBook Pro that I purchased in 2009 (It doesn't have a SD card slot, but is an aluminum body). Right now it's using Mac OS X 10.5.8 and will not let me update any further, which means that I cannot install any new versions of iTunes or some other programs. How can I fix this?

    Anniematch wrote:
    I have a MacBook Pro that I purchased in 2009 (It doesn't have a SD card slot, but is an aluminum body). Right now it's using Mac OS X 10.5.8 and will not let me update any further, which means that I cannot install any new versions of iTunes or some other programs. How can I fix this?
    You can't upgrade beyond 10.5.8, that is the final step for Leopard.
    You can purchase Snow Leopard (10.6.x) from Apple (but you should have 2G of Ram installed, and sufficient hard drive space). Your Mac is fully capable of running Snow Leopard and will probably already meet the specs I mentioned.

  • I need to move my photos and contacts from my old iPhone 3 to my new iPhone 4.  When I open iTunes, it is not letting me sync my old phone so I can back up to my new phone.  Any thoughts?

    I need to move my photos and contacts from my old iPhone 3 to my new iPhone 4.  When I open iTunes, it is not letting me sync my old phone so I can back up to my new phone.  Any thoughts?

    Buy a Mac OS X 10.6 DVD from the online Apple Store, install it, and run Software Update twice.
    (96978)

  • Windows 7 will not let me update the driver for my iphone 4s so I can see it in iTunes. Any suggestions?

    Windows 7 will not let me update the driver for my iphone 4s so I can see it in iTunes. Any suggestions?

    You turned off all firewall and antivirus ? You could try downloading the update via a browser - what device are your trying to download the update for ? If it's an iPhone 4 :
    GSM / sim card model
    CDMA model
    Then in iTunes press and hold the shift key on Windows when clicking the Check For Updates button which should let you navigate to the downloaded file

  • My iphone 3g 16 g is ticking me error 28 and do not let me update gets stuc

    I have it my iphone with baseband 6.15 and firmware 4.2 now will not let me update or restore that brand I would like to know that 28 errors mean and what is the solution

    There is no reason that a brand new phone should be having problems. I would say return it for a new one because it's less then a week old or return it. It's unacceptable. I have been having software issues with my iPhone 3GS too. I feel that Apple did a half done job on the software and really failed to bring new features to their third gen. iPhone.

  • I have an iphone 4s and recently it has not let me update my apps eventhought the apps are free!! I dont know why, it says my payment method is being declined, i have a very low balance but its a free app and a free update so that shouldnt matter shud it?

    I have an iphone 4s and recently it has not let me update my apps eventhought the apps are free!! I dont know why, it says my payment method is being declined, i have a very low balance but its a free app and a free update so that shouldnt matter shud it?

    Yep, it does matter. You won't be able to update or get anything until this is fixed. Contact iTunes support to see what's wrong:
    http://www.apple.com/support/itunes/

  • HT4623 my iphone 5 is not letting me update to ios 7.  it's saying your software is up to date at 6.1.4

    my iphone 5 is not letting me update to ios 7.  it's saying "your software is up to date"  at 6.1.4

    If you have the original iPad 1, iOS 5.1.1 is as high as you can go with software updates.

  • TS3694 when doing a restore to try and solve a wifi problem with my iphone 5 i got past the point where the software was extracted from my phone but then an error message came up saying that the phone could not be restored because of an unknown error (301

    when attempting a restore,  as suggested, to try and fix a week wifi signal on my iphone 5 I got past the point where the sopftware was extracted from my phone but then an error message appeared saying that the phone could not be restored becase of an unknown error (3014). I have tried about 20 times to make it work after trying a number of suggestions I have seen online. My phone gives me know response accept showing a picture of the cable and the itunes symble an the screen permanently - please help

    Hello JD_NINJA,
    Thanks for using Apple Support Communities.
    Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device.  To troubleshoot this issue please follow the directions below.
    Check your security software
    Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
    Get help with iOS update and restore errors - Apple Support
    When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
    Restore your device from an iCloud or iTunes backup - Apple Support
    Take care,
    Alex H.

  • My Iphone 4 will not let me update the software to ios 7.1.2, how do I need to correct this?

    I Phone 4 will not let me update my software to ios 7.1.2.

    Nilena, thanks for the information! Do you have a computer? What error does it give you when you try to do over the air? You can also try to update if via computer see here: http://support.apple.com/en-us/HT4623. Let me know if their is anything else I can help you with.
    Thanks,
    AmberF_VZW
    Follow us on Twitter @VZWSupport

  • My iphone 5 wont let me update apps keeps popping up with old apple id how do i fix this

    my iphone 5 wont let me update apps keeps popping up with old apple id how do i fix this??

    All apps downloaded/purchased are tied to the apple ID used to download/purchase them.
    If you change your Apple ID and do not wish to use the old apple ID and password to update them, you have to delete them and redownload or buy them under the new apple ID.

  • Hey everyone i have an iphone 3gs it was running on 4.0.1 and i updated to 6.0.2 but now it says your phone could not be activated?

    hi everyone i have an iphone 3gs it was running on 4.0.1 and i updated to 6.0.1. then its said i needed to restore my phone to factory settings and i did but now it says; "your phone could not be activated because the activation server is temporarily unavailable try connecting your iphone to itunes to activate it or try again in a couple of minutes"...if this problem persists contact apple support at apple.com/support.
    I've tried all that i can and still no results. Could anyone shed some light on the subject if so it would be greatly appriciated!

    Ok thank you so much! Although I ended up taking the sim card out of my new Iphone and reinserting it into my old one it finally let me restore it! So thanks once again this really helped!

  • My iphone 5s wont turn on. I tried to recover it through itunes and it didnt work. It said that due to an error my phone could not be restored. However when I plug it into itunes via my computer it turns on, I get the apple, the white line beneath it?????

    My iphone 5s wont turn on. I tried to recover it through itunes and it didnt work. It said that due to an error my phone could not be restored. However when I plug it into itunes via my computer it turns on, I get the apple, the white line beneath it???? As soon as I remove it from the computer it goes completly off again???????

    Hey beaches37,
    Thanks for the question. I understand you are experiencing issues with your iPhone 5s. You mentioned you received an error when attempting to restore. If you remember this error, the following article may help to resolve it:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Furthermore, you may want to try restoring your iPhone in recovery-mode:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • "Your iPhone could not be activated because the activation server could not be reached"

    It won't let me set up my phone due to the wifi- it keeps coming up with "Your iPhone could not be activated because the activation server could not be reached". The wifi is definitely working- I'm using it now! However, after you have entered the password for this wifi you do have to enter details into a portal but this hasn't popped up so I can't do it.  This is the wifi I have, any ideas? Thank you in advance

    3 possible causes for this message:
    1] activation server is actually down. Extremely rare occurrence and of very short duration
    if it happens.
    2] iPhone is jailbroken or hacked.
    3] computer the iPhone is hooked to has been used to jailbreak or hack iOS devices.
    For 1], try again. Try different wifi at friend's, school, public place like Starbucks or McDonalds.
    For 2] & 3], you are on your own. Google may provide some insight. Terms of Use for this
    forum prohibit discussion of hacked and jailbroken devices.

Maybe you are looking for

  • Creative Zen Touch - Hard drive problems - HD upgr

    Hi! I bought my Creative Zen Touch almost a year ago now. Yesterday my hard dri've went crazy. The sound was a funky rythm, 0 DJ "scrathes" then one more high-pitched sound. In the Rescue menu I try to format the hard dri've and it responds with "Har

  • Mac Mini Freezing

    In the last few days my Late 2009 Mac Mini with 10.6.8 Snow Leopard installed has begun to freeze after a few hours of no activity.  I have set the computer to never go to sleep as I thought that was maybe the problem. But it did freeze again. It fre

  • Changing values in a properties file

    Hi, I'm working in a Struts environment and I am trying to open a .properties file in my WEB-INF/classes/ (*.properties) directory and allow the user to change those values and write them back. I access the properties by pulling them out in a Map: Lo

  • Workflow : Using include CNTN01 in Method in 4.6C

    Hi, I am using the include <CNTN01> in BADI method in 4.6C release. But I get syntax error as <CNTN01> has data declarations using LIKE. And LIKE is not allowed in Method in release 4.6C. I want to use Macros to set the container Variable to pass to

  • Run C++ code or an executable from Flex?

    Is there any way of running or calling C++ code from within flex? If it isn't, can you run an ordinary executable file from within flex and maybe after that read the result file generated by that executable? Thanks for your help!