TS3694 I have attempted to update my iphone to ios8. My phone has gone into recovery mode. I have tried all of your recommendation and it will not come out of recovery mode. HELP!

I have attempted to update my iPhone to ios8. My phone has gone into recovery mode. I have tried all of your recommendation and it will not come out of recovery mode. HELP!

Without knowing what you did and exactly what happened (error messages) all I can suggest is:
Try:                                               
- iOS: Not responding or does not turn on           
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable       
- Try on another computer                                                       
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar                                     

Similar Messages

  • HT1414 my iphone 4 running on IOS 5 will not come out of recovery mode and gives the error code -1. Can any one help me please because i've been without a phone for 2 weeks and still not getting anywhere.

    Hi there could someone out there please help i've got a Iphone 4 running on IOS 5 and it will not come out of recovery mode> It comes up with the error code -1 which i've looked everywhere on the web but no one seams to have the same issue.
    This is a reconditioned replacement phone from the apple genius guys which i paid £130 for and only got 3 months warranty with and as soon as the warranty run out it crashed on me and never been able to get it back out of recovery mode. I've been back to the apple genius guys and they have told me there's nothing they can do other than charge me £130 to take the phone off me and give me another reconditioned phone with a 3 month warranty. Which as you can properly tell i dont want to.
    PLEASE PLEASE HELP ME thanks for your time

    This is a bad hardware error, Baseband Error. Some have reported getting through this error by Restoring iPhone with the SIM Card removed. Try that. Try restoring with different computer. Search Web some more for other thoughts.

  • My ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

    my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

    Hey erinoneill24,
    Thanks for using Apple Support Communities.
    Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
    iPod displays "Use iTunes to restore" message
    http://support.apple.com/kb/ts1441?viewlocale=it_it
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
    If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
    Have a nice day,
    Mario

  • Please help, my ipad  mini is gone into to recovery mode after updating to iOS8.1 and even though I restored it through iTunes it still will not come out of recovery mode

    please help, my ipad  mini is gone into to recovery mode after updating to iOS8.1 and even though I restored it through iTunes it still will not come out of recovery mode

    Try a Reboot press & hold menu button & power button hold both down until you see Apple Logo you will not lose any data. But you may need to do this more than once. I never use PCs for software upgrades or downloads I always use wifi had no problems with iOS 8.1 B sydd

  • My iPhone 4 will not come out of recovery mode.

    After attempting to update to iOS 7.1.1 (I think, may have been the next update) my phone will not come out of recovery mode when I tried to install the update. It is now stuck, and nothing I can think of will work. Tried redsnow, tried on another computer... Nothing works. Any advice?

    Hi there incendrix,
    I would recommend taking a look at the troubleshooting steps found in the article below. 
    If you can't update or restore your iPhone, iPad, or iPod touch 
    -Griff W.

  • My iphone 4s will not come out of unlock mode ?

    my iphone 4s will not come out of unlock mode i reset the phone back to factory setting still not working

    When you updated did you have to create a different code for the install? I just got another tip from a different user and found out (and didn't think about it at the time) the install code has to be used to open the phone...NOT the previous version code! Got mine open. Good luck.

  • HP LaserJet P3005x will not come out of sleep mode

    Printer will not come out of sleep mode (after being in sleep mode for an extended period of time (over 24 hrs)).  When this happens, I can not ping the printer and pressing any of the buttons on the printer will not bring it out of sleep mode.  I'm testing now to see if I can recreate this with the printer attached to my PC via USB.

    Hi arosecarter,
    I understand your monitor is not coming out of sleep mode. Take a look at the following support document, Resolving Problems with Sleep and Hibernate Modes (Windows 7). Step 3 might be of particular interest to you, as you mentioned your keyboard and mouse are not really working for you either. Perhaps it is another connected device that is causing the issue? Anyway, hopefully this document will be of help to you. Best of luck. Have a wonderful day.
    Ryan1216
    I work on behalf of HP
    The advice and opinions given here are my own and not those of HP

  • I try to restore my iphone in recovery mode but didn't get it and now can not come out of recovery mode please help me

    Hi I had perches one iphone4 from Hong Kong last month but after coming back i try to restore my iphone but it's give error 3194 then i try to restore it in recovery mode but still can not restore error -1 and now i cannot get out of recovery mode please help me to shovel this problem.

    Are you running modified software on your phone?  This error seems to be common if the firmware has been modified and you're trying to restore the phone again. 

  • IPhone will not come out of Recovery Mode. At. All.

    Hi, my 1 year old iPhone has gone into Recovery Mode after a failed restore and im at my wits end. I get error message, after error message. I have windows xp so its a lot harder to use all the downloads that are available. I havent jailbroken my iPhone. Ive tried, iRecovery, TinyUmbrella, and changing the Firmware. Still that annoying cable, arrow and iTunes symbol. I cherish my phone and if anyone can give me any tips to get it out of this endless loop id be much appreciated. If I try to restore it, it gets to the very last bit and then, bam, 'iTunes cannot restore this iPhone due to blah blah blah.' I know the only solution for this is probably giving up or taking it to the apple store, which will cost me just as much as the phone did. Im lost. Help. Please. :'/

    See this support document for error explanations.  Resolve iOS update and restore errors - Apple Support
    Generally, the 1015 error has to do with jailbroken devices, or computes that have been used to jailbreak phones.

  • I had to reset my apple password. I am trying to purchase an app and it will not accept my new password. Help?

    After resetting my apple password I am trying to purchase an app. It will not take my new or old password. Please help.

      Store  Use Store settings to change or create an iTunes Store account. By default, the iTunes account you’re signed in to when you sync iPhone with your computer appears in Store settings. You can change accounts on iPhone to purchase music or applications from another account. If you don’t have an iTunes account, you can create one in Store settings.  Sign in to an account:  
      View your iTunes Store account information:  
      Sign in to a different account:  Choose Store and tap Sign out, then tap Sign in and enter your username and password.Choose Store and tap View Account, then type your password and follow the onscreen instructions.Choose Store and tap Sign in, then enter your user name and password.
      Create a new account:  
    Choose Store and tap Create New Account, then follow the

  • Printer now will not come out of sleep mode with new MiFi 5510L

    I have a HP 3522 All In One wireless printer networked via my MiFI router that goes into sleep mode as it is supposed to after a set period of idle time but the only way I can get it back on line/wake up is to unplug it and plug it back in.  While asleep, none of the buttons work and all print jobs fail because the 'printer cannot be found'.  I never had this problem until I upgraded from an older MiFi unit to the 5510L.
    I am using a MacBook Pro and MacBook Air both running OS X Mavericks 10.9.1
    Any ideas?
    Thanks,
    Dave

    KSutherland, I'm so sorry this is occurring with your phone. I understand how frustrating this can be when you're trying to use your phone and have to pull the battery. I researched information about your phone that have been reported by customers and didn't find this as a known issue. I also show the Bionic received a software update on December 9, 2011. I recommend updating your phone to the new software, which can assist with. I listed a link below with information and instructions for the update.
    http://support.verizonwireless.com/system_update/droid_bionic.html
    Additionally, I would also like to recommend clearing the cache and browser history. This can help the device from having slow functionalities. The steps are below:
      From a Home screen, select the App menu (located in the lower right).
    Select Browser.
    If the application icon is missing, select App menu filter (located at the top) then select All apps.
    Select Menu.
    Select More.
    Select Settings.
      Within settings you can clear the following :
    --Clear all, which clears all deletes history, cache, cookies, form data and passwords
    --Clear cache, which clears visited website content stored on the device. The cache enables the browser to download only the content that has changed since the last time a website was visited. Since the browser only downloads changed content, pages are loaded faster.
    --Clear history, which clears a listing of URLs (website addresses) that have been recently visited.
    --Clear cookie data, which clears some cookies contain customized preference and logon information for previously visited websites. Once deleted, the website may prompt for this information again.
    Pleas let us know if the above steps work for you.
    Have a good day.
    KinquanaH_VZW
    Follow us on Twitter @vzwsupport

  • My form will not come out of query mode. Why?

    I have a simple form with 2 canvases the second canvas apears as
    a modal window and inherits the main menu (6i Smartbar menu).
    I place the modal screen in query mode and execute query, if the
    form returns no records it then becomes stuck in query mode. The
    cancel query mode button returns the message
    FRM 41009 Function Key not allowed. I really don't see why this
    key should not work, Is this a bug in forms 6i?
    The only work around make the second canvas a form in it's own
    right which is a rather un-necessary solution.
    Regards
    Oliver

    Try to do Soft Rest to Get it Back on.. If you can once you tried my first suggestion Run your Razr in Safe Mode to see if a Third Party app is Causing the Issue. Here are the instructions for a Soft Reset and  Running Safe Mode
    Soft Reset - DROID RAZR / RAZR MAXX by MOTOROLA
    A soft reset is the most useful tool for resolving a variety of issues. In most cases, a soft reset will not affect data on the device, unless the battery is very low.
    Press and hold power button + volume down key until the device powers off then release.
    What is safe mode and how do I use it with the DROID RAZR?
    Safe mode is a method that allows the device to run without non-essential applications. This is beneficial for troubleshooting 3rd party applications.
    Enable Safe mode
    Power the device off.
    Press and hold the Power button then select Power off.
    Power the device on.
    Press and momentarily hold the Power button.
    When the Motorola Dual Core screen appears, simultaneously press and hold Volume Up / Down keys.
    Continue to hold the Volume Up / Down keys until Safe mode appears in the lower left.
    Disable Safe mode
    Power the device off.
    Press and hold the Power button then select Power off.
    Power the device on.
    Press the Power button.

  • IPod will not come out of "hold" mode

    Hi. I have a gerneration 3 (i think) iPod (the kind with four round buttons on the front) and have a potentially severe problem. It thinks it is in "hold" mode all the time all of a sudden and will not respond to my pushing its buttons at all. I can't re-set it. The battery is fully charged and it responds when I plug it in or connect it to a computer, but I cannot make the lock icon come off the screen. All my files on it seem to be intact. Does anyone have any tips on what I can do to resolve this issue myself (without having to visit a repair shop). I live very far away from an Apple store and I don't drive. Any info would be much appriciated.
    Thanks!
    iPod gen. three (I think)   Mac OS X (10.1.x)   four buttons on front

    Sorry, I did try that -- it was actually the first thing I thought of to do. I tried it again when you suggested it just to be safe, and conditions stayed the same. Since then I have hooked up my remote (which I never use so I did not think of it right away) and it is responding to the commands I can give it through the remote. Unfortunately the Pod itself remains in hold so I can't use the click wheel or anything. Is there a way to reset it through the remote that you know of? Do these details give you any ideas about what the problem is?
    Thank you
    gen 3   Mac OS X (10.1.x)  
    gen 3   Mac OS X (10.1.x)  

  • IPhone 3 will not come out of recovery mode

    I currently have a iPhone 3 that I would like to give my 10 year old son. I have an error coming up in recovery mode stating that iTunes has detected my iPhone is in recovery mode and that i must restore the iPhone it can be used with iTunes.
    When I connect the cable to my iMac, it brings up an unknown error "1015".
    The S/N# 8694510JY7H
    Please Help

    See this support document for error explanations.  Resolve iOS update and restore errors - Apple Support
    Generally, the 1015 error has to do with jailbroken devices, or computes that have been used to jailbreak phones.

  • I-touch will not come out of recovery mode, even after restore attempts

    iTouch became unresponsive after charging. The screen dispalyed icons indicating it should be connected to iTunes.
    iTunes said that it was in recovery mode and needed to be restored.
    Multiple attempts at restore have been unsuccessful. After each restore "completes", the ipod reappers in iTunes saying that it is in recovery and must be restored.
    ITouch buttons will only shut it down by holding down the top black button. Power down never appears on screen, home button is unresponsive.
    iTouch is only 6 months old.
    Thanks so much for any ideas!

    Did you check your security software settings, to allow iTunes to contact Apple during the process?
    Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
    copied from http://support.apple.com/kb/TS3694

Maybe you are looking for

  • Problems getting selected values from HtmlSelectManyCheckbox

    Hello, I am having problems getting values via getSelectedValues() from my HtmlSelectManyCheckbox component. The method returns an object array but the values are the same as the initial selectItems property. JSP: <h:selectManyCheckbox id="checkBox"

  • Reading pictures in the gallery

    Hi, is there a way to access the pictures stored on a phone from a MIDlet app.?

  • JSP problem..... + Dynamic Content

    Hello to all, In the Jsp page i am adding some dynamic content through JAVAScript. but after clicking back and forward on the browser it doesnot retaining that content. Can anyone give idea how to restore that dynamic content.. Please its urgent.. ab

  • Extending SalesOrder Query search on MSR 2.0

    Hi all, I need to extend query search for sales order by adding a date range (FROM - TO in place of a single date field DATE_DOC). But the DATE_DOC_HIGH custom field has not a FieldDescriptor so it's not possible to call: searchKeys<i> = getFieldDesc

  • Need assistance

    hello to all my friends.i have a very common sort of question which i generally think whenever i practice oracle 10g.my question is what are the frequent errors which a DBA face in day to day wok.what major things should a DBA do in day to day databa