TS3694 Please how do I handle this. I downloaded a higher version of my Iphone 3 but during the installation it always hangs and show an error message that it cannot be downloaded with code1015.

Please how do I handle this?
I downloaded a higher version of my Iphone 3 but during the installation it always hangs and show an unknown error message that it cannot be downloaded and the code of the message 1015.

This is usually a result of the iPhone being hacked with the cutsie term for that "jailbroken".
http://support.apple.com/kb/TS3694#error1015
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

Similar Messages

  • HT4623 I am having 4S. It is showing the IOS 6 update, but whenever I try to update it, it shows an error message saying " It cannot be downloaded at this time". Can someone please tell me how to update it?

    I am having 4S. It is showing the IOS 6 update, but whenever I try to update it, it shows an error message saying " It cannot be downloaded at this time". Can someone please tell me how to update it?

    Make sure you have the Latest version of iTunes on your computer.
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • After installing firefox version 31 I keep getting error messages that firefox cannot find some servers. How can this be fixed?

    I use Ebates. Now when I go to Ebates and choose a store, then the transfer to store website comes up and then an error message that firefox cannot find the listed server. I keep getting that message alot.
    On the frontier homepage there is an error message that firefox cannot find the ad server for yahoo.
    I was having problems with firefox so I did a reset firefox and then installed the new version 31.
    Seems it might be draggy or slow/sluggish. I like using Ebates. I contacted them and they said they were not having any issues at the moment. I contacted my antivirus provider and they said they could not detect anything either. Would a system restore get me back to the older version?

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • TS3694 hi, I was trying to update my iPhone 3gS but when I turn it on again iTunes send me a message that says error 3194 occurs, please help me!!

    hi, I was trying to update my iPhone 3gS but when I turn it on again iTunes send me a message that says error 3194 occurs, please help me!!

    If the screen shows a plug going to itunes, then you have no choice,  It's in recovery mode.  You'll be given the chance to restore from a backup either from itunes or icloud.
    I assume when you got the message to update (was this for the ios or update some apps?), that was before the device when dead.  At any rate, doing a restore does not change the ios.

  • HT204053 I cannot log into iCloud using my Apple username and password.  I keep getting an error message that states "CANNOT SIGN UP - The Apple ID is valid but is not an iCloud account."  How do I fix this?

    I cannot log into iCloud using my Apple username and password.  I keep getting an error message that states "CANNOT SIGN UP - The Apple ID is valid but is not an iCloud account."  How do I fix this?

    You are getting this message because you are attempting to create an iCloud account on a PC.  You can only create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.2) or higher.  After creating your account on one of these devices you will then be able to sign into the account on your PC.

  • I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?

    Can someone please help me get my iPhone to sync to your computer?
    I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?

    Hello lenmin,
    Thanks for using Apple Support Communities.
    To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
    iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
    Have a great weekend,
    Alex H.

  • I am trying to upgrade to iTunes 11.4 and get an error message that says " iTunes has an invalid signature.  It will not be installed"  How do I fix that?

    I am trying to upgrade to iTunes 11.4 on my Windows7 PC and get an error message that says " iTunes has an invalid signature.  It will not be installed"  How do I fix that?

    Hi curliejo, 
    Welcome to the Apple Support Communities!
    In your situation I would recommend the steps in the following article for troubleshooting iTunes. It may be necessary to completely remove and reinstall iTunes in this situation. Be sure to remove all of the components with iTunes in the correct order as outlined in the article before installing fresh. 
    Issues installing iTunes or QuickTime for Windows
    Have a great day, 
    Joe

  • Trying to discard an app into TRASH and I receive a message that "app cannot be removed because it is locked."  How can I unlock an app???

    Trying to discard an app into TRASH and I receive a message that "app cannot be removed because it is locked."  How can I unlock an app???

    Something may have corrupted your User account permissions. Whatever it was that did that is likely to do it again, and will require further investigation.
    To reset your User account permissions perform the following. It may not fix the problem but it will not make it any worse:
    Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac.
    When the Mac OS X Utilities screen appears, select Utilities > Terminal.
    In the Terminal window type resetpassword and press Enter. A window will open behind Terminal that looks like this:
    Do not enter a new password.
    Select your startup volume at the top. From the dropdown below it, select the user account with the problem.
    At the bottom of the window, you will see Reset Home Directory Permissions and ACLs.
    Click the Reset button.
    Quit Reset Password
    Quit Terminal
    Quit OS X Utilities and restart your Mac.
    Back up your system before doing anything else because disk corruption is another possibility that has to be considered.

  • Keep getting error message that I'm signed on with a temporary ip address or a temporary profile.

    For at least 2 weeks not my HP  won't give me my desktop. It comes up with a different desktop and doesn't save anything. Keep getting error message that I'm signed on with a temporary ip address or a temporary profile. I've done all I know to do and all that HP has suggested. I still get this when I shut down the computer and then turn it on again or log off or restart.

    Hi,
    You can try the steps from the link below:
    Error in Windows 7: The User Profile Service failed the logon. User profile cannot be loaded
    or,
    Run the microsoft Fixit
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • HT1338 just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?

    just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • My 4th gen. shuffle keeps on sending me an error message that it cannot connect with iTunes because it's not formatted properly.

    Hi,
    About two days ago my shuffle started to send me an error message that it cannot connect with iTunes because it's not formated properly.
    So I've already updated the softwer, I tried to use it with every single USB port on my computer and searched for solutions on the net but couldn't find any useful information...
    I literally see the following message: The iPod "194" cannot be used with iTunes because it is not formatted properly.
    Any ideas?....
    Thank you!

    If you cannot access the iPad because of the passcode, you have no choice but to restore it using the same steps that you would use if you forgot the passcode.
    iOS: Forgotten passcode or device disabled after entering ...

  • HT1998 Why can't I uninstall AirPort 4.2 from my Windows 7 PC..  I downloading and reinstalling the 4.2 but during the installation process I get an error.  It reads...    "1608: Unable to Create InstallDriver instance Return Code -2147024894

    Why can't I uninstall AirPort 4.2 from my Windows 7 PC..  I tried downloading and reinstalling the 4.2 but during the installation process I get an error.  It reads...    "1608: Unable to Create InstallDriver instance Return Code -2147024894

    You should not install it again..
    Boot the computer into safe mode and try the uninstall again.
    No luck you will have to manually uninstall which is a pain. Delete the files and open regedit and delete the registry entries.. better still use the system restore to go back to a previous system where you had no 4.2 installed..
    Or just ignore it and install the latest 5.6.1 and if it gives trouble well do a clean install of windows.

  • I cannot upload my iPhoto book to the Online Store.  I get an error message that I cannot connect.  Apple support said servers are too busy. Anyone else have this problem and a solution?

    I cannot upload my iPhoto book to the Online Store.  I get an error message that I cannot connect.  Instructs me to try again later.  Apple support said servers are too busy. Anyone else have this problem and a solution?

    I get an error message that I cannot connect.  Instructs me to try again later.
    Try again later?
    LN

  • I recently traveled in Egypt with my iPad. Iam back in the US, but I wanted to download an app, and I get a message that I cannot download from the Australian store, and I need to switch back to the USA how do I do this?

    I recently visited Egypt with my iPad.  I am now back in the USA. I tried to download a new app, and I got a message that I could not download from the Australian store. I was told I need to switch back to the USA store. I did not deliberately switch to the Australian store. Why doesn't the iPad automatically switch back to the USA.

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3. Tap on your Apple ID
    4.Tap "View Apple ID"
    5. Enter your user name and password.
    6. Tap "Country/Region."
    7. Tap "Change Country/Region"
    8. Select the country/region where you are located.
    9. Tap "Done".
    Note: If the change doesn't take effect, sign out of account and sign in again.

  • I am getting an error message that reads "Cannot ____ because the scratch disks are full. How do I go about clearing this? I have a Macbook. Thanks.

    I have only had Photoshop elements on my computer for less than a month (free trial). The past few days I am getting an error message whenever I try to do anything that reads "Cannot __ because the scratch disks are full." I do not know how to fix this problem. Any advice would be greatly appreciated!

    Photoshop Elements Mac user
    If your program is Photoshop Elements (any version) you have posted in the wrong forum. Somehow your thread has been posted in the Adobe Premiere Elements Forum (video editing).
    Please re-post your thread in the Adobe Photoshop Elements Forum or wait for a moderator here to see your thread here and move it from here to there.
    Photoshop Elements
    Think about.....Sounds like you do not have enough free hard drive space for editing. In your Photoshop Elements Mac case, please check out Photoshop Elements/Preferences/Performance and the Scratch Disk area.
    Photoshop Elements Help | Scratch disks and plug‑ins
    ATR

Maybe you are looking for

  • Can I use multiple Facebook accounts when sharing photos with Photos

    With iPhotos I could set up multiple Facebook accounts and choose which account to share to...that does not seem to be an option with Photos.

  • Jwsdp vs. Apache Tomcat

    Hello, I have installed Jwsdp and separately Tomcat 4.1.27 from apache.org I compiled sample with name "date" from jwsdp. When I run it in jwsdp (tomcat), everything OK. But when I try to run it in Tomcat 4.1.27, I return this exception: org.apache.j

  • Oracle 9i Rel2 on Win2k3

    Hi I have asked this before in another forum but since this is the installation forum i'll ask again. Our production database is Oracle 9i Rel2 9.2.0.1.0 it is installed on Win2K3, fromwhat i know it should be at least 9.2.0.3.0, but the support comp

  • Handy app: PDF to Keynote

    Here's a very handy tool I've just run across, and I haven't seen mentioned here: PDF to Keynote. Like the name says, it will take a PDF document, and put each page on a separate slide in a new Keynote presentation. You can set various parameters for

  • Do I need to buy SignalExpr​ess to use a ENET-9472 Digital Output Module.

    I'll describe my application and then ask the question. We are life testing DC motors.  For each motor we measure the armature temperature. We are controlling the on/off duty cycle with a PLC.  If the temperature exceeds a limit we want to send a sig