TS3694 What does the error 3194 mean is wrong with the ipod?

Our ipod got splashed with water in the bathroom (8 year old brings it everywhere).  Now it doesn't work at all.  Plugged it into the computer and it says detect unknown ipod, in recovery mode - do we want to restore it.  I choose "restore & update" but it gives the error of 3194 and the apple site doesn't say any specifics about this error.  Is our ipod dead????  It is only just over a month old so we have the 1 year warranty.  If my son got it wet, will apple do anything for us.  Even if it isn't covered under the warranty, is it something that can be fixed or do we need to buy a new ipod?????
Any help in this, otherwise I am about to call the 800 number.  Any insite appreciated.

See the actions for that error here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore

Similar Messages

  • What does this error message mean and how do I solve it? "Sorry, one or more of the following command-line tools was not found:  /usr/bin/lsbom, /bin/pax, /bin/mkdir, /bin/chmod, or /usr/bin/update_prebinding."

    When I try to open up this program, Pacifist, I receive this error message. Here's a screenshot. http://i.imgur.com/v717w.jpg What does this error message mean and how do I solve it?

    It sounds like some of the Unix Executable commands were removed (or the permissions to those were modified) out of the /usr/bin/ folder.  You can try opening disk utility and repairing permissions on Macintosh HD or you can reboot your computer and holding down option-r when it comes back up to reinstall Lion again.  This will not delete your personal information or applications you have installed but it would be best to back it up to Time Machine before you do.  The article on how to do this is here. (http://www.apple.com/macosx/recovery/)  I have had to do this before and it works like a charm.  It should fix your issue but grab a cup of coffee because its going to take about 35 - 40 minutes depending on how fast your computer is.

  • What does this error message mean? disc recording not found

    What does this error message mean? disc recording not found

    Often it suggests issues with device filters in your registry. But it's probably best to check the situation more closely.
    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

  • What does MFMessageDomain error 1032 mean and how do I fix it?

    What does MFMessageDomain error 1032 mean and how do I fix it?

    I get the same when plugging the phone into iTunes - saying it can't sync - yet it does.

  • TS1846 What does this error message mean?

    What does this error message mean? I am trying to burn a project to DVD...
    Formatting was not successful.  Layer 0 exceeds the maximum layer size allowed.  Please choose a suitable marker location that will support this condition.

    The project is 1:22:30  - 1080P HD (4.9GB)...I am using the share drop down and hitting DVD...I am using a DVD+R Dual Layer 8.5GB...It processes for about an hour and a half the status bar gets almost done and then the error message comes up...thanks for any help you can give me

  • What does rendering error -50 mean? I'm trying to export to apple device from FC Pro

    What does "rendering error -50"  mean?  I'm trying to export to an apple device (Itunes) and I've done it this way before but now I just get the error message.  I'm not very technically savvy.

    I had a bunch of video clips which I took on a point and shoot camera.  They had been uploaded along with photos to Aperture, but putting the SD card directly  into my computer. Every year I take all the clips, edit out the junk, and make a DVD for the kids and grandkids to enjoy.  When in final cut, I just clicked on the camera to import from Aperture. 
    I also make DVD's though out the year of special events, using these same type of video clips taken with the point and shoot. I sometimes do slow motion set to music, etc. I have not had a problem before.  And all the bad files came from one trip in October.  All the files after it were fine as well.  I'm not sure what I did differently for that trip. 
    The little video clips say DSCN1783 (or some other file number) and are 1920x1080.  I try to "share" my project to a Master File on an external drive.

  • HT3529 what does 2127 error message mean?

    what does 2127 error message mean when trying to send a text??

    "...usually the 2127 invalid destination indicates that you should check your number and try again.  It could be if number sending to has text blocked, a network issue, or not sending to a full 10 digit phone number...if you are sending text to a contact in your phone make sure contact saved has all 10 digits with area code save and also in contact make sure saved as a mobile number and not a home number..."

  • What does this error message mean?  MFMessageErrorDomain error 1028.

    What does this error message mean? 
    MFMessageErrorDomain error 1028.
    I can't seem to delete a message from my mailbox.  The above error message comes up every time and the message then reappears in my inbox.

    Back up all data. Rebuild the mailbox. Try to delete the message again. If you still can't, continue.
    From the Mail menu bar, select
    Mail > Preferences > Accounts > Advanced
    From the menu labeled
    Keep copies of messages for offline viewing
    choose
    Don't keep copies of any messages
    Close the window and save the change. Relaunch Mail and test.

  • What does this error message mean: "Filename: Mips32.ari TFTP Error: 'File not found' in AP-105"?

    Question: What does this error message mean: "Filename: Mips32.ari TFTP Error: ‘File not found’ in AP-105"?
    Product and Software: This article applies to AP-105.
    The root cause of this error is that the AP cannot perform a code upgrade.
    Scenario 1
    Check the ArubaOS code.
    The minimum requirement to bring up an AP-105 is ArubaOS 3.3.3+ or ArubaOS 3.4.1+.
    If the controller is running pre 3.3.3 code, upgrade the code to fix the issue.
    Scenario 2
    If the AP is not connected to the controller directly, bring up the AP in the controller and then connect it to the desired location. This process loads mips32.ari to the AP so that the AP can upgrade the code.
    Scenario 3
    The AP has no power adapter and you want to use the PoE feature. A few controller series like the 200 and 3000 Series do not support PoE. In this case, the AP cannot be terminated physically in the controller. Instead, connect the AP to the PoE switch, which is connected to the controller. Then assign a static IP configuration for the AP using the following commands:
    apboot> setenv ipaddr <ip address>
    apboot> setenv netmask <netmask>
    apboot> setenv gatewayip <ip address of the gateway>
    apboot> setenv master <ip address of the master>
    apboot> setenv serverip <ip address of the TFTP server>
    apboot> setenv bootcmd tftp
    apboot> save
    apboot> boot
    Locally configure the TFTP server for the AP and load the mips32.ari file from the controller with the help of the TFTP application.

    I want to download this file Mips32.ari for AP-105 device. Please give me this file download link. APBoot 1.2.4.4 (build 26618)
    Built: 2011-01-07 at 13:42:04Model: AP-10x
    CPU: AR7161 revision: A2
    Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
    DRAM: 128 MB
    POST1: passed
    Copy: done
    Flash: 16 MB
    PCI: scanning bus 0 ...
    dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
    00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000
    01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000
    Net: eth0
    Radio: ar922x#0, ar922x#1Hit <Enter> to stop autoboot: 0
    Checking image @ 0xbf100000
    Invalid image format version: 0xffffffff
    Checking image @ 0xbf800000
    Invalid image format version: 0xffffffff
    eth0 up: 1 Gb/s full duplex
    DHCP broadcast 1
    DHCP IP address: 192.168.x.xx
    DHCP subnet mask: 255.255.255.0
    DHCP def gateway: 192.168.x.xx
    DHCP DNS server: 192.168.x.xx
    DHCP DNS domain: xx
    ADP multicast 1
    ADP broadcast 1
    ADP multicast 2
    checksum bad
    ADP broadcast 2
    checksum bad
    ADP multicast 3
    checksum bad
    checksum bad
    checksum badRetry count exceeded
    DNS request 1 for aruba-master to 192.168.x.xx
    checksum bad
    checksum bad
    checksum bad
    T Using eth0 device
    TFTP from server 192.168.x.xx; our IP address is 192.168.x.xx
    Filename 'mips32.ari'.
    Load address: 0x2000000
    Loading: checksum bad
    T T checksum bad
    T checksum bad
    checksum bad
    checksum bad
    T checksum bad
    checksum bad
    T T checksum bad
    T checksum bad
    checksum bad
    T T T
    Retry count exceeded; starting again
    eth0 up: 1 Gb/s full duplex
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum badARP Retry count exceeded; starting again
    eth0 up: 1 Gb/s full duplexchecksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad  ThanKs :)
     

  • I understand that when using Numbers/Pages - an up-arrow on a document means that the file is still to be uploaded to the cloud, what does a down arrow mean? It seems the document can't be accessed until the arrow clears.

    I understand that when using Numbers/Pages - an up-arrow on a document means that the file is still to be uploaded to the cloud, what does a down arrow mean? It seems the document can't be accessed until the arrow clears.

    I believe what it's supposed to mean is that some changes were made to the document on another device, and those changes were saved back to the cloud.  Now you've opened iWork on a different device to access that document - it compares the document you've got locally with the one in the could, sees some recent changes and downloads them.
    What gets me is why this sometimes happens even when I've not made any changes to a document from another device.

  • TS1702 0xE8000004-what does this error message mean?

    0xE8000004-what does this error message mean?  I get it when trying to sync my Garmin USA app.

    See http://support.apple.com/kb/TS3221.

  • MacBook Woke Up By Itself - What does this error message mean?

    My MacBook woke itself up today. First time this has happened to me. I can see from the Console Log that it's due to a USB disconnect, but I can't see anything that's disconnected. Everything appears to be working, so I'm not sure what's up. Here's the log snippet. Can someone tell me what the error codes mean?
    6/4/10 1:18:00 PM kernel Wake reason = UHC4 EHC2
    6/4/10 1:18:00 PM kernel System Wake
    6/4/10 1:18:00 PM kernel Previous Sleep Cause: 5
    6/4/10 1:18:00 PM kernel USB (EHCI):Port 1 on bus 0xfa connected or disconnected: portSC(0x101803)
    6/4/10 1:18:00 PM kernel An Unknown USB Device (Port 1 of Hub at 0xfa000000), may have caused a wake by being connected
    6/4/10 1:18:00 PM kernel The USB device IOUSBWirelessControllerDevice (Port 1 of Hub at 0x1a000000) may have caused a wake by being disconnected
    What does Wake reason = UHC4 EHC2 mean? I can't find a meaning for UHC4 and EHC2 online.
    Also, Based on the description "IOUSBWirelessControllerDevice" sounds like it would have something to do with the wifi on my MacBook, but that appears to be fine. Any ideas on what hub 0xfa is? Is that an internal USB connection? Any ideas where "Port 1 of Hub at 0x1a000000" is located?
    Thanks again

    6/4/10 1:18:00 PM kernel An Unknown USB Device (Port 1 of Hub at 0xfa000000), may have caused a wake by being connected
    6/4/10 1:18:00 PM kernel The USB device IOUSBWirelessControllerDevice (Port 1 of Hub at 0x1a000000) may have caused a wake by being disconnected
    This is the part that matters.
    Unfortunately, a number of the MacBook's internal components (keyboard, iSight, USB ports themselves) are on the same USB bus. This means if any one of these components is disturbed somehow, the machine may wake from sleep. As far as I know, there is no easy way to figure out which specific device woke the machine.
    Be sure to disconnect all external devices, and try turning off Bluetooth, to see if the computer continues to wake from sleep.
    ~Lyssa

  • What does this error message mean? How can I correct it?

    I have attched a picture of the block diagram with the error message and a picture of the code.
    Cheers 
    Attachments:
    front_panel.PNG ‏35 KB
    block_diagram.PNG ‏82 KB

    Hi ssteel,
    it seems the IntrumentAssistant contains some ScanFromString nodes...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Help for the layperson. What does this error message mean?

    This is the console for a game-server loading. It is based in Java and MySQL. I am interested in the lines 'Loading Map...1472' through 'Server Terminated'
    Does any of the error stuff after that make sense to someone familiar with Java?
    Starting LineageDc Server.
    Loading gameserver config.
    loading Version config
    Loading Rates config.
    Loading AltSettings config.
    Loading CharSettings config.
    Loading PcCommandSettings config.
    =================================================
    L1DC Datapack Version: 667
    L1DC Server Version: 667
    Port = 2000 opened
    Ip internal = 127.0.0.1 ready
    Ip external = * ready
    XP = 2000.0
    Lawful = 12.0
    Karma = 55.0
    Drop = 55.0
    Adena = 55.0
    Global Chat Lvl = 40
    PvP = On
    IngameNews: Loaded 1 ingamenews.
    IngameNews = On
    Max Online Users : 30
    IDFactory current max ID: 268435456
    Loading Map...1472
    java.lang.ArrayIndexOutOfBoundsException: 1472
            at l1j.server.server.TextMapReader.read(Unknown Source)
            at l1j.server.server.TextMapReader.read(Unknown Source)
            at l1j.server.server.model.map.L1WorldMap.<init>(Unknown Source)
            at l1j.server.server.model.map.L1WorldMap.getInstance(Unknown Source)
            at l1j.server.server.GameServer.initialize(Unknown Source)
            at l1j.server.Server.main(Unknown Source)
    server terminated
    Press any key to continue . . .it should just look like this:
    Loading Map...             Ok!
    Spawning Mob...            Ok!
    Loading NPCAction...       Ok!
    Loading Boss Cycle...      Ok!
    Database Tables Loaded Successfully!
    Server Started. Memory Used: 105 MB
    Waiting for Connections!(Note: This is output, not actually code, so disregard highlighted functions)
    Thank you for your educated help!
    I just dont have time to learn another language for a side-project like this, hehe. If need be I can post the contents of the files that the error messages reference, they are none so long as the output I posted above.

    LineageGuy wrote:
    Ahhh, that makes much more sense. I will write them an e-mail, thanks. I guess this does rule out the possibility of the error being with my batch file. Good news.Not exactly. To clarify.
    There could be a configuration problem on your end (which only someone familiar with the code etc could diagnose aka not me) which when changed could "fix" the problem. I however would state that it is a bug regardless because code that does not validate runtime supplied data (via configuration settings or other user supplied settings) is not nearly robust enough.
    So to make a long story short the answer may yet be that you need to change value X to something else or that your map file (or the like) is corrupted. Again nobody here can tell you exactly what the cause of the problem is to that detail. Because we don't know what the code looks like or is doing etc. But if I had wrote the code it wouldn't just be dying with an ArrayIndexOutOfBounds, it would say something at least like "Map corrupted". Or something.

  • What does this error message mean? "Blank Tab Multivariate Test Addon could not be installed because Firefox cannot modify the needed file."

    I am running Firefox 6 Beta and have now recieved 2 popups about the Blank Tab Multivariate Test. I finally found info on how to install it. However, when I went to the page suggested and tried to install I got the above error message. I want to know how to solve this problem so I can participate in the test.

    That means that the extension lacks the required <nowiki><em:unpack>true</em:unpack></nowiki> line in the file install.rdf to make sure that the file gets unpacked after installing.<br />
    Firefox 4 and later no longer unpacks an extension automatically, but renames the XPI file to the ID of the extension and copies that file to the extensions folder in the Firefox Profile Folder.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *https://developer.mozilla.org/en/install_manifests#unpack
    *https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking

Maybe you are looking for