TS3775 Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the

Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the problem

Your answer is likely in Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support If you are familiar with this document, please re-read it and I suspect you may find something you either missed or are doing incorrectly.

Similar Messages

HELP!! My Ipad 2 screen turned blue suddenly, and nothing is happening, I tried to hold the wake/lock button for 10 seconds but it isnt working!! PLEASE HELP!!

    Please help me. I am very scared. I just got this for Christmas, and I dont have another $500 for a new one. PLEASE HELP !!

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

C6-00. Screen turns off, but touch sensor still wo...

in normal mode (non physical keyboard mode), i use it, everything works fine..
but in physical keyboard mode, once slide it, a few secs later, the screen turns off.. i tried to use the lock button at the side to turn it on back, but, nothing happens, i have to slide n lock unlock it many times to get it turned on again.( BUT SOMETIME, WHEN I SLIDE IT, EVERYTHING WORKS NORMALLY!)
when this thing happen, even in normal mode, i cant revive it back... i take out my batteries, put it back, start, it still doesnt turned on. but with "some miracle", sometimes it does turn on back.. but when i go to keyboad mode again... screen turns off.. same **bleep** happens.
anyone face the same problem?
"what do you mean by touch sensor still works?"
-when the screen turns off(at home screen), i press at the "contact" at bottom right of the screen, the phone does vibrate. proves that the touch sensor works.
fyi, i've tried,
7370
7780
shift + space + del.
these 3 formatting methods just doesnt get this thing back to its normal condition again.
sigh. lost trust in nokia

It is the latest v 20.0.042. In fact, I already reinstalled the firmware again and did a hard reset *#7370# but problem is still there. The display is totally off now either in vertical or horizontal keyboard mode, I have to slide the keyboard a little and hold it there to get the display back, it is too tiresome and is unacceptable. So I highly suspect the it is the sliding keyboard that causes the display problems.
I went to Nokia Care and they said that this phone is no longer under warranty. I will have to pay a substantial amount of money to have them repair it. This sucks

Target Display Mode: Lenovo T420 DisplayPort to iMac (2nd screen) does not work

Configuration:
- Laptop Lenovo T420, DisplayPort, Windows 8.1
- DisplayPort cable, Adapter to Mini DisplayPort
- iMac (Intel, 27-inch, Mid 2011) as 2nd screen, connected via Mini DisplayPort Adapter, Mavericks OSX 10.9.1
Problem:
- iMac does not start Target Display Mode
- Even cannot be forced via Cmd + F2 or Cmd - Shift - F2
Test:
- Lenovo via DisplayPort cable to 2nd screen works fine
- Can switch between PC only, Duplicate, Extend display
Question:
- What is wrong?
- What can be done to idenify the root cause?
Kind regards, Marcel.

Hello Marcel,
It sounds like you are wanting to use the iMac in Target Display mode with your PC. Target Display mode is a feature that is supported from one Mac to another Mac according to this article:
OS X Mavericks: Use another Mac as a display
http://support.apple.com/kb/PH14264
Target Display Mode lets you use a Mac as the external display for another, “primary” Mac.
Thank you for using Apple Support Communities.
Cheers,
Sterling

I click on the plus symble next to a tab, to open a new tab, the plus symble turns blue, but nothing happens. Why?

I want to open a new tab, I click on the PLUS next to the last tab opened, it turns blue, but does nothing. No new tab is open

Caused by the Ask Toolbar extension in Firefox 3.6.13+, disable that extension or un-install it.

Why does my screen turn blue and freeze every time i try to plug in my 'mini display to hdmi' cable into my thunderbolt port in order to use an external monitor?

why does my screen turn blue and freeze every time i try to plug in my 'mini display to hdmi' cable into my thunderbolt port in order to use an external monitor? it only works if i turn the computer on with it already plugged in.

Do you have gfxCardStatus installed? Is your monitor set to "Integrated" or "Discrete". You want it set to Discrete to drive the external HDMI display.
Try resetting the PRAM and SMC
<About NVRAM and PRAM>
<Intel-based Macs: Resetting the System Management Controller (SMC)>
Are you sure you have a good miniDisplayPort to HDMI cable?
Do you have another HDMI display you can test against (your neighbor's HDMI capable TV).
Do you have friend that can test the cable using their Mac and maybe their TV or a monitor that has HDMI input.

I was trying to update to iOS 6 then I thought it was done so i left the wifi but now my screen turns blue and i cant use it.

I was trying to update to iOS 6 then I thought it was done so i left the wifi but now my screen turns blue and i cant use it.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Hi All, I'm using an Iphone 4. Last friday my iphone dead and not able to turn it on. I have tried to connect to itunes Home button power button it say's Iphone in DFU mode and asking to recover but when i click on restore it gives 1644 error. plz sugg

Hi All,
I'm using an iphone 4.Last friday my iphone dead and not able to turn it on. I have tried to connect to itunes +Home button + power button it say's Iphone in DFU mode and asking to recover but when i click on restore it gives 1644 error. plz sugguest.
my os version: 4.2
Firmware: 02.10.04

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

I tried to update my ipod 4th gen. but when I came to see how much charge the screen was red and it wasnt charged and i cant use my ipod. the screen turned blue also one time, and now the apple logo comes up and its bright then dim and it stays there help

I tried to update my iPod 4th generation while it was charging and when I came back to check on it the screen was red and it wouldnt go off, and my ipod wasnt charging like it was supposed to. I found out how to get the color of the screen off but my ipod always has the low battery thing and when I charge it sometimes the screen turns blue or the apple logo comes up bright and then it gets dim and stays there. My ipod wont turn on, and I really want it to work again. Help me please! Also, I noticed my ipod battery hasnt been lasting long as it should efore this happened.

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

My macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help.

my macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help. i've tried the command s command p command v but nothing i've tried to the safe mode then a quick restart but nothing
disk utility give me this:
Process:         Disk Utility [371]
Path:            /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
Identifier:      com.apple.DiskUtility
Version:         11.5.2 (298.4)
Build Info:      DiskUtility-2980400~60
Code Type:       X86-64 (Native)
Parent Process: launchd [86]
Date/Time:       2013-11-05 03:29:41.247 -0500
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          9522 sec
Crashes Since Last Report:           29
Per-App Interval Since Last Report: 981 sec
Per-App Crashes Since Last Report:   25
Anonymous UUID:                      F6B8E263-76C8-4C7D-AA58-48134BF4BA78
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000020
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0   libobjc.A.dylib                         0x0000000100c62fbc _read_images + 312
1   libobjc.A.dylib                         0x0000000100c79721 map_images_nolock + 1266
2   libobjc.A.dylib                         0x0000000100c62761 map_images + 115
3   dyld                                    0x00007fff5fc039c5 dyld::notifyBatchPartial(dyld_image_states, bool, char const* (*)(dyld_image_states, unsigned int, dyld_image_info const*)) + 853
4   dyld                                    0x00007fff5fc0c849 ImageLoader::link(ImageLoader::LinkContext const&, bool, bool, ImageLoader::RPathChain const&) + 201
5   dyld                                    0x00007fff5fc04d54 dyld::link(ImageLoader*, bool, ImageLoader::RPathChain const&) + 118
6   dyld                                    0x00007fff5fc08f7c dlopen + 490
7   libSystem.B.dylib                       0x0000000100a14e40 dlopen + 61
8   com.apple.CoreFoundation                0x0000000100d78ef7 _CFBundleDlfcnLoadBundle + 231
9   com.apple.CoreFoundation                0x0000000100d77e97 _CFBundleLoadExecutableAndReturnError + 1191
10 com.apple.Foundation                    0x0000000101008355 _NSBundleLoadCode + 638
11 com.apple.Foundation                    0x0000000101007c78 -[NSBundle loadAndReturnError:] + 742
12 com.apple.Foundation                    0x000000010101960c -[NSBundle principalClass] + 38
13 com.apple.framework.DUSupport           0x0000000100082080 -[DUModuleManager(_private) findDUModules:] + 405
14 com.apple.framework.DUSupport           0x0000000100081ed9 -[DUModuleManager orderedModuleListOfModules] + 40
15 com.apple.DiskUtility                   0x0000000100006082 0x100000000 + 24706
16 com.apple.DiskUtility                   0x0000000100005f59 0x100000000 + 24409
17 com.apple.AppKit                        0x0000000101444625 -[NSWindowController _windowDidLoad] + 538
18 com.apple.AppKit                        0x00000001013e1f77 -[NSWindowController window] + 112
19 com.apple.AppKit                        0x00000001015f61d9 -[NSWindowController showWindow:] + 47
20 com.apple.AppKit                        0x00000001015c7c5c -[NSDocument showWindows] + 98
21 com.apple.AppKit                        0x00000001015c64bb -[NSDocumentController openUntitledDocumentAndDisplay:error:] + 340
22 com.apple.AppKit                        0x00000001014f7b44 -[NSDocumentController(NSInternal) _openUntitled] + 111
23 com.apple.AppKit                        0x00000001014f79ab -[NSApplication _doOpenUntitled] + 257
24 com.apple.AppKit                        0x00000001014f733b -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 185
25 com.apple.AppKit                        0x00000001014f6fd9 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 77
26 com.apple.Foundation                    0x0000000100ffd0d6 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 360
27 com.apple.Foundation                    0x0000000100ffcf06 _NSAppleEventManagerGenericHandler + 114
28 com.apple.AE                            0x0000000104d7332b aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 162
29 com.apple.AE                            0x0000000104d73224 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 32
30 com.apple.AE                            0x0000000104d7312b aeProcessAppleEvent + 210
31 com.apple.HIToolbox                     0x00000001028a0619 AEProcessAppleEvent + 48
32 com.apple.AppKit                        0x00000001013fc095 _DPSNextEvent + 1191
33 com.apple.AppKit                        0x00000001013fb801 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
34 com.apple.AppKit                        0x00000001013c168f -[NSApplication run] + 395
35 com.apple.AppKit                        0x00000001013ba3b0 NSApplicationMain + 364
36 com.apple.DiskUtility                   0x0000000100002009 0x100000000 + 8201
37 com.apple.DiskUtility                   0x0000000100001db8 0x100000000 + 7608
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0   libSystem.B.dylib                       0x0000000100a27c0a kevent + 10
1   libSystem.B.dylib                       0x0000000100a29add _dispatch_mgr_invoke + 154
2   libSystem.B.dylib                       0x0000000100a297b4 _dispatch_queue_invoke + 185
3   libSystem.B.dylib                       0x0000000100a292de _dispatch_worker_thread2 + 252
4   libSystem.B.dylib                       0x0000000100a28c08 _pthread_wqthread + 353
5   libSystem.B.dylib                       0x0000000100a28aa5 start_wqthread + 13
AND MORE TOO MUCH TO COPY N PASTE HELP PLEASE!!!!!

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

My iphone5s screen turned blue then grey. i've just updated it to ios7.1 two weeks ago. tried restoring through itunes but it says error 40. how to fix?

Hi, i've just updated my iphone 5s to ios7.1 two weeks ago, however, 4 days ago, my phone's screen turned blue then grey. I have tried restoring it through i tunes but itunes keep saying error 40. Can this still be fixed? or does it need a replacement?

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

When using my iMac the screen turned blue and so I turned the compute off. When I turn on again power does get to the computer but there are no chimes and the screen remains black. Any advise please. David

When using my iMac the screen turned blue and so I turned the compute off. When I turn on again power does get to the computer but there are no chimes and the screen remains black. Any advise please. David

Hello DJJOC,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where your iMac's screen will not illuminate, please reset your SMC by following the information outlined below.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Note: For Intel-based Xserve computers that are not responding, you can shut down locally, or by using remote commands, or by pressing and holding the power button for five seconds.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Take care,
Alex H.

When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login.

When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login.
Iv tryed this numerious times still keeps going back to pasword. Can not get any further. Tried restart holding shift key.. still nothing. What do i do?

Thank you for your help.
I couldnt get to the hard drive/ desktop. Soft login not even working. So i could not do any of that.
In the end i took it to Apple and its actually the hard drive on its way out. A common issue with that series of Mac. Funny seeing i dont use this mac much. However being 2.5 years old and out of warrently, Apple have recognise this issue with this series/ Model and installing a new hard drive at no cost.
Very luck and greatful. And not feeling so dumb that it was something i did or could troubleshoot myself.
Hope this helps others that it just might be your hard drive failing.

Home sharing is turned on on both of my computers but only one computer is showing the icon.

I have both of my computers turned on and home sharing is turned on on both computers as well but only one computer is showing the icon so I can't share. I have tried turning off the home share and turning it back on but nothing changed.
Any suggestions?

Hi there nc999!
I have an article here for you that will help you troubleshoot this issue with Home Sharing:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks for using the Apple Support Communities!
Cheers,
Braden

I have a 3GS. Am trying to sync a plantronics explorer 232 Bluetooth headset and can't figure it out. I have Bluetooth turned on but it searches for devices and the headset never shows up. Anyone know exactly how to do this? My tech skills are lacking

I have a 3GS. Am trying to sync a plantronics explorer 232 Bluetooth headset and can't figure it out. I have Bluetooth turned on but it searches for devices and the headset never shows up. Anyone know exactly how to do this? My tech skills are lacking

I have the same blueparrott headset headset with the directions. Actually reading them just fixed my iphone pairing issue.
Here they are in case u still need them along with what I needed to do to get mine to work with iphone 4
Pair Headset with Phone
Turn off headset off
Hold down headset's MFB (large top button) until red & blue lights flash and you hear 2 rising tones, followed by 4 more tones. Must wait for all before you release the MFB button!! (I had my hubby hold the MFB while I waited for the tones since both come from the headset
Release the MFB and follow your phone's instructions to place it in 'bluetooth' discoverable mode. With the iphone4, go to "General" and then "Bluetooth" and turn indicator to "ON".
This is where my issue occurred as the phone could not find the bluetooth, although it worked with my LG phone. So after trying it several times thinking I was nuts and that the issue was with the iphone, I looked further in the blueparrot's directions and found this step that fixed the issue.
Reset Paired Devices List
On the bluetooth, press and hold down both the volume up & volume down buttons for 5-6 seconds. A double beep will be heard and the list will be reset. Pairing info for devices previously paired will be lost.
The bluetooth directions provide this as step 4 but that did not work for my phone (see below)
4. Once the phone discovers the headset, select "pair" and enter "0000" code and that when pairing is complete the blue light on the headset will stop flashing and phone will prompt you to 'connect'.
This is what I had to do after resetting the device list on my bluetooth
4. My iphone instanting discovered the headset and displayed it under 'Devices" but showed a message that it was 'not connected'. Once I selected the device on the iphone by pressing on it then it changed to "connected".
Even when I turn the bluetooth on and off the device remains on the list and alll I do is select it to connect and disconnect after I turn on my blueparrott bluetooth
I hope this helps others!

TS3775 Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the

Similar Messages

Maybe you are looking for