TS3938 logic pro 7 won't open and power pc applications are no longer supported appears, can anyone help?
logic pro 7 won't open and power PC applications are no longer supported appears, can anyone help?
You'll have to update Logic Pro.
Similar Messages
-
I am trying to install Final cut pro 5 studio V1.0.1 (2005) on OS X lion. I get a message "You can't open the application final cut studio.mpkg because power pc application are no longer supported. My computer is New. Is their a link I can go to get tech support?
You won't find any help at tech support ... other than telling you the facts: Intel processor Macs require FCP 5.1 or higher. FCP 5.0 and earlier were written for PowerPC processor Macs, long before Apple switched to using Intel processors.
And then there's the issue of the OS. OS 7 will allow FCP 7 (and sometimes even FCP 6) to work OK, but versions earlier than that have spotty operation on Lion.
Here's a brief history of full FCP versions and recommended OS compatibility:
* = requires PPC ** = works with both PPC and Intel *** = require Intel
FCP 1.0* OS 9
FCP 2.0* OS 9
FCP 3.0* OS 9, OS 10.1, OS 10.2
FCP 4.0* OS 10.2, 10.3
FCP 4.5* OS 10.3
FCP 5.0* OS 10.3 (OS 10.4?)
FCP 5.1** OS 10.4, 10.5
FCP 6.0** OS 10.4, 10.5, 10.6 (OS 10.7?)
FCP 7.0*** OS 10.6, OS 10.7
FCP-X*** OS 10.6, OS 10.7
Essentially, you have a newer Intel processor Mac with a new OS and very old, incompatible software. You might be able to find a used version of Final Cut Studio 3 on sites like ebay or craigslist as it is no longer offered by Apple as an upgrade.
Alternatively, you could purchase and download FCP-X, but it is an entirely different application, sharing virtually nothing with previous versions of FCP.
-DH -
What does "You can't open the application "Setup QuarkXPress6.1" because power PC applications are no longer supported" mean? I am trying to install an old version of Quark on my 2010 Macbook pro.
jennyba wrote:
What does "You can't open the application "Setup QuarkXPress6.1" because power PC applications are no longer supported" mean? I am trying to install an old version of Quark on my 2010 Macbook pro.
As has been mentioned, the software in Mac OS X that supported the running of PPC applications rather than current Intel applications on Intel computers such as your MBP was last seen in Snow Leopard. However, since I believe your MBP originally came with Snow Leopard, you may be able to boot from the DVD's that came with the computer and install it on an external HD and try to install Quark on that.
I think a better solution would be to buy Snow Leopard Server from Apple by phone (800-692-7753 and be specific about wanting part # MC588Z/A), installing it as a virtual machine in software like VMware Fusion, and then installing Quark 6 in that. You'll still need a license number to authorize the Quark installation. -
I upgraded to 10.8.4 and now I can' use my Epson scanner I get a message saying, "ou can't open the application Epson Scan apps because Power PC applications are no longer supported." I also can't synch my old Palm Pilot for the same reason.
How can I fix this?We need to sort out some facts here first:
• You cannot be running Mt. Lion on your iMac G5. What Mac is it? What is the Model Identifier listed in About This Mac; More Info; Hardware Overview
• What is the model of your Epson Scanner?
• Have you attempted to scan using Image Capture, located in your Applications folder?
• Your Palm Pilot software will only run in Snow Leopard; so depending upon which Mac you have, you will either have to:
1) partition your hard drive or add an external hard drive and install Snow Leopard into it to "dual-boot" when you want to access you Palm software, or
2) install Snow Leopard Server (now available from Apple for $20 telephone orders USA & Canda only) into Parallels 8 to run your Palm software in Mt. Lion:
[click on image to enlarge] -
I just upgraded my MAC from OSX 10.5.8 to Snow Leopard and then to Mountain Lion 10.8.2. When I try to access my Microsoft Office for MAC (2004 edition) files I am getting a message "can't open Office because Power PC applications are no longer supported. How can I access all of my save Word documents? I just want to be able to retrieve all of my documents that were in Microsoft Office for Mac (2004). If I purchase the newest version of MS office for Mac from Apple will I be able to retrieve my old documents?
Use any number of free alternatives to your nearly decade old version of MS Office.
Consider
LibreOffice (donation-supported)
NeoOffice (free)
OpenOffice (free)
In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for years. Life is better without Microsoft. -
I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"
Because you are running lion.. FCS 6 is a Power PC app and Lion doesn't support Power PC anymore.. So you can't install it.. Three options..
1. Revert back to Snow Leopard.
2. Purchase FCP X...
if you can't stand FCP X
3. Call apple directly, 1800-MYAPPLE and ask to purachse FCS 3 for $999... (its FCP 7)
I just got FCS 3 today through apple phone sales.. -
I just got a new MacbookPro using Mavericks OS. When I tried to load Filemaker Pro I got this message: You can't open the application Filemaker Pro.app because Power PC applications are no longer supported. This is a disaster.
GiraffeHero wrote:
I just got a new MacbookPro using Mavericks OS. When I tried to load Filemaker Pro I got this message: You can't open the application Filemaker Pro.app because Power PC applications are no longer supported. This is a disaster.
Ralph Landry1 wrote:
The only viable solution is to upgrade to the latest versions of the PPC legacy software that will run under Mavericks.
Except for the other viable solution:
If you are unable or unwilling to upgrade to a version of Filemaker that runs natively under Mavercks, you can run your existing version of Filemaker by installing Snow Leopard Server into Parallels:
[Click on image to enlarge]
Installing Snow Leopard Server into Parallels for DUMMIES:
http://forums.macrumors.com/showpost.php?p=17285039&postcount=564 -
i am trying to restore my mac osx 10.7.4 from an ext lacie harddrive and getting message "u can't open the application lacie backup support because power pc application are no longer supported"
Use any number of free alternatives to your nearly decade old version of MS Office.
Consider
LibreOffice (donation-supported)
NeoOffice (free)
OpenOffice (free)
In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for years. Life is better without Microsoft. -
after updating to Mavericks a window pops up saying "Power PC applications are no longer supported" when I try to open AppleWorks6, Microsoft Word, and Illustrator CS. How can I access my files. Secondly, is there a way to allow these programs to function?
MichelPM wrote:
I use those terms primarily for users who seem not too computer savvy as explaining and going through the procedures can be daunting to a user who doesn't do much more than just being able to install and use software on a basic or novice level.
That is why I wrote the "Installing Snow Leopard Server into Parallels for DUMMIES" guide, to give a literal step by step instruction set on how to use Parallels in this situation for a basic or novice level user on up!
http://forums.macrumors.com/showpost.php?p=17285039&postcount=564
Quite honestly, a step by step guide to install Windows into Parallels could be needed by some basic or novice users, as well!
My point is to not scare aware a user with a problem where a potential solution exists.
This is especially true because some of the few, but vocal, "naysayers" about this approach would use your statements to validate their continued criticism of it.
One guy in particular criticises every option other than upgrading to Mavericks compatible software, even when the OP clearly expresses a problem where that option does not exist! ... and he was an early and very vocal proponent of the "installing Snow Leopard into a new partition - 'dual-booting' solution" when Lion was first released back in 2011! -
I can't install Rosetta Stone onto my new Mac OSX (version 10.7.5)
Any suggestions?
The message says "can't open application because Power PC applications are no longer supported."
Thanks!Thank you... spoke to Rosetta Stone and they said the same thing, and the give a nice discount when upgrading.
Normally 5 levels of a language run about $479. When upgrading, you can get the same 5 levels for $199.
Fewer levels costs even less. -
Installed a new router. Installed Lion. Have an Epson Workforce 600 multi function printer. Two problems.
1. I cannot get Lion to recognize that the Epson is a multi function printer. There is no scan option on the "print/Scan" popup window.
2. When I try and use the epson scan utility I get: POWER PC APPLICATIONS ARE NOT LONGER SUPPORTED.
I have tried EPSON support with no real luck as they say it is Apple upgrades that are the problem.
Apple support was quite rude..said it was not their problem and that I should call epson. Told the I did but it made no difference just got the same reply.
Have no idea what to do.....seems I cannot find out which multi-function printers Lion supports.daolbuzzard1 wrote:
Epson Workforce 600 multi function printer
Not to give you another run around, but you need new printer drivers from Epson for your printer so it works in Lion.
Now it could be that they are working on it, or that they could have decided not to provide new drivers in order for you to force upgrade.
The only thing a user can do is decide very carefully BEFORE upgrading to a newer Apple operating system, make sure that all their current hardware and software works and make a decision for themselves.
Since you upgraded to Lion, you can go back to Snow Leopard and your PPC software will work.
Do you need instructions? -
Pages software in 10.8.3 does not support previous work done on microsoft office 2004. Pop up says -- You can't open the application "Mircosoft Excel" because Power PC applications are no longer supported. What can I do now?
Use Numbers, OpenOffice, LibreOffice, Microsoft Office 2008 or newer, Google Docs, or similar tools to open the files.
(85829) -
I recently up dated my OS to 10.7.3 and I get a "can't open application because PowerPC applications are no longer supported. Can this be restored? If not do you know if Epson has drivers for my scanner that work around this?
You cannot run PPC software in Lion. Go to Epson's website to see if they have an updated scanner driver. If they don't then you can try using VueScan if it supports your scanner model.
-
'You can't open the application Window Media Player because Power PC applications are no longer supported'. What do I do?
Latest version, 2.4.2.4: http://dynamic.telestream.net/downloads/download-flip4macwmv.asp?prodid=flip4mac wmv
Needs QuickTime 7 at the least... -
I recently uploaded 10.8, but I have a number of VALUABLE old files which I can no longer read because "power PC applications are no longer supported. How can I retrieve them"?
Here is a post I assembled for another with a similar problem:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PPC software or Lion/Mt. Lion;
3. Upgrade to an Intel compatible versions of your software, or find alternatives that will open your data files;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.
Maybe you are looking for
-
Clearing between invoices whith Payment method supplements
We are using Payment method supplements whith customers invoices, and need clearing this invoices whith suppliers invoices in F110 payments. Suppliers invoices aren´t the supplement and due to F110 dont´t clear suppliesrs invoices whith the cuatomer
-
Ctrl and fn keyboard shortcuts don't work after update
After I updated today (list of updated packages below), all gnome keyboard shortcuts that use the ctrl or fn key stopped working completely. What could cause this? I've never had any problems with these keys in linux before and they all work out of t
-
Restoring Broken Links doesn't work
I have a project, unfortunately stored on a network drive, that recently crashed. I also have a copy of the project stored on my computer. The project on my computer has a number of topics listed in the Broken Links folder. Either I'm not understandi
-
Is it possible to Call a Sequence as a Substep type of EditStep "Test Stand "
I wish to create a custom step type. I would like to create a sequence and call it as an EditStep. Is this possible?
-
We are having problems getting apple tv to work for a customer. We have this working on a different controller and the AP (non Hreap). The AP/SSID that is having problems is setup the same (Blocking is set to disabled, and mutlicast is enabled). T