TS3992 All of my ICloud options are greyed out, how do I activate them?

I cannot get iCloud to activate.  It instructs me to go to my email and follow instructions. There is nothing there.

Ensure that your document is either RGB color or grayscale and 8 bits/channel for the filter gallery to work.
Which shortcuts don't work with smart objects?
Certain ones may not work, because smart objects are not pixel layers.
Did you look on the menus to see if those commands are greyed out?

Similar Messages

  • When I try and print a web page in the print screen ALL the Print Frame options are greyed out. It won't let me print a page as I see it. I need to pring a page as is. How do I do it in the new 8.0??

    I go to print and try to select the radio button to print all frames, but It's not working

    The '''Print Frames''' options are greyed out unless the web page is made with Frames. I-Frames don't work the same.
    Check out this '''''frames test page''''' - http://www.draac.com/framestest.html <br />Is the '''Print Frames''' part of the print dialog box active?
    As far as printing a page as you see it, many web pages use '''print.css''' files for print-media. The print.css specifies exactly what is to be sent to the printer and it can control the formatting of the printed page.

  • On iPhone 5c iOS 8.2, I go to settings, cellular, use cellular data for: Under "use cell data for are my apps but they are greyed out how can I ungrey them??

    iOS 8.2 on iPhone 5c, goto settings, cellular, use cellular data for: all my apps under "use cellular data for" are greyed out. I've restart and hard reset. Looked thru all settings. Can someone help??

    Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Appel logo comes back again? You will not lose data by resetting.
    If this does not work, did you try to switch off Cellular Data, restart the phone and switch it back on again?

  • CS6 Encore launches but all options are greyed out

    The headline says it all. I'm using CS6 on a MacBook Pro, OS 10.7. Previously Encore has worked well. After the most recent update, Encore will launch but all of the options are greyed out. I can't start a new project, etc. When I try to open a previous Encore project, I receive an error message that some needed software is missing. Any ideas to help me solve the problem? With many thanks.
    Christopher B

    I suspect that same sort of issues that one gets when the activation is messed up. I think the resolution is deactivate and reactivate.
    Are you missing any presets in Premiere? I would look at some of the issues in the Premiere forum to further diagnose the problem and look for the recommended fix.

  • All options are greyed out after i Click on Apply Maitenance

    Hi All,
    I am upgrading our EPM system from 11.1.2.1 to 11.1.2.2. I have downloaded all the required files from e-delivery.oracle .com and unzipped them. I selected Apply Maintenance and when i clicked next all the options are greyed out. I am not sure what i have done wrong. I am using the same user ID which was used for installation of hyperion 11.1.2.1.
    Kindly help me out.
    Find the screenshots at my blog.
    http://hyperion-consulting.blogspot.in/2013/01/all-options-are-greyed-out-after-i.html
    Regards,
    AS

    From your screenshot it says that 11.1.2.2 Foundation has been installed when it should say 11.1.2.1 like this - http://2.bp.blogspot.com/-J_9A8U41JS0/T5WXO3JQtxI/AAAAAAAAEj8/0nqcNdo1bFQ/s1600/image022.png
    Also you should only have the option to "Apply maintenance release" like this - http://1.bp.blogspot.com/-1zQHVCODSr0/T5WXNLQN4YI/AAAAAAAAEj4/vNQ_vOT03_8/s1600/image021.png in your screenshot you also have the option to Re-install the release.
    Are you definitely sure the environment has had nothing applied to it.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • My 3D is not working in Photoshop CS5. All of the options are greyed out

    Hi,
    I just installed the photoshop CS5 but find out my 3D is not working, all of the options are greyed out. I have checked on the openGL menu in preference but still not work. I have core i7 and intel HD graphics 3000 with up to 1760MB dynamic video memory. please help

    Is the active document RGB?
    Could you please post a screenshot with the pertinent Panels/Menus visible?

  • IMovie: My options are greyed out in content library. Help!

    I have iMovie 10.0.6 and I have used iMovie in previous versions. When I go to window > content library all the options are greyed out. How do I fix this?!

    anyone?????

  • Trying to get cd onto ipod touch but snching options are greyed out - I've opted to manually manage.

    I'm trying to get CD onto ipod touch. copied it into ITunes library but when I get to synching 'selected playlists etc' all options are greyed out.  If I try and clink sync in bottom right hand corner it gives me warning msg that everything already on ipod will be deleted and I don't want that.  any ideas?

    Head to Settings -> General -> Restrictions on your iPod Touch and make sure that restrictions for app installations are turned off.
    B-rock

  • Lightroom 5.4. Edit options are greyed out. I tried reset warnings already.

    Hi,
    I just added a bigger harddrive and reinstalled Lightroom 5.4.
    Now,  2 of 3 edit options are greyed out.
    No access to plug-ins or external editors for original files.(NEF's)
    I tried reset warnings already.

    Yes, Nikon transfer was used. From a D800, But that was a year ago.
    It has been working fine.
    Before I upgraded to 5.4 I had this problem.
    When I upgraded to a larger harddrive and re-installed 5.4 the access was limited to only "Copy with Lightroom adjustments."
    Last night it started working, I had full access!
    But, today it won't work on the same image/plug-ins.
    the NIK Collection for example.
    This effecting ALL RAW files! D100, D90, D3100, D7000, D800.
    My Laptop is doing it now, too!!!
    I installed DNG Converter 8.4 with No Difference. NO RAW EDITS.
    I can't send a NEF to DXO Optics Pro 9, or anything else!

  • ATA190: Web GUI page options are greyed out

    ATA190: Web GUI page options are greyed out and device failed registration to CM 10.5
      do anyone have a resolution o this issue?

    Options Greyed out issue can be due to the below Bug, which is listed as just cosmetic:
    ATA190: Web GUI page options are greyed out
    CSCur53864
    Description
    Symptom:
    ATA190: Web GUI page options are greyed out.
    Most of the options in the Web GUI of the ATA 190 are greyed out and cannot be configured. There is no option in CUCM configuration page or the ATA190 Web GUI to unlock the configuration options.
    Here is a list of a few of the pages that are greyed out and do not allow any editing:
    Network Setup > Basic Setup > Internet Settings
    Network Setup > Basic Setup > Time Settings
    Network Setup > Advanced Settings > VLAN
    Network Setup > Advanced Settings > CDP & LLDP
    Administration> Log > Log Module
    Administration> Log > Log Setting
    Administration> Log > Log Viewer
    Conditions:
    ATA 190 Devices running firmware version running 1.1.0 (006)
    Workaround:
    These options are not configurable and are supposed to be view only. The issue is cosmetic.
    Most of the Configurable settings are available under the Voice Menu and Administrative Menu.
    -Terry
    Please rate all helpful posts

  • Unable to share--options are greyed-out.

    I have created a project, but when I chose "Share," all of the options are greyed out. 
    I have the project active in the timeline, but it still isn't allowing any "Share" option.
    Other projects in the browser allow me to share with all of the choices seemingly available.
    It seems like it should be a simple remedy, but once again, I am outwitted by technology.
    Any suggestions will be appreciated.
    Thanks in advance,
    Gary

    Yes, Tom, Thanks.
    There was something "hinky" when the camcorder was uploading the files, (like a "flickering" with the connection), but the files seemingly appeared in the project.
    I noticed that there is a little yellow triangle with an exclamation point next to the "clap-board" icon next to the project's name, but I'm unable to identify what the problem is.
    I highlighted the entire timeline, and hit "Render All," but it didn't change anything.
    I may just start over again fresh, but if you have any other suggestions, let me know.
    Thank you,
    Gary

  • Notification options are greyed out!!

    Dear Expert,
    When I directly goto Transaction QA11 -> Menu-> Inspection processing -
    > Notification----> worklist/creation/change/display, then I am able to use all the Notification options.
    But if I directly goto Transaction QE51N and double click the Inspection lot number in the left side of this screen, it takes me to the "Record Usage Decision: Characteristics Overview" of QA11 screen, Where I goto menu-->Inspection pocessing->Notification--->worklist/create/change/display, the options worklist/create/change/display are greyed out, I need to enable them.
    Thanks in advance for your help!!!

    Hello,
    I dont think you can enable this. You can generate notification by defect recording and intiating notification in QA11.
    Regards
    gajesh

  • Mixdown options are greyed out???

    I've recorded something with my guitar through USB with CS 5.5 and for some reason the mixdown options are greyed out. What should I do to make them function again? I've tried reopening the piece and saving it under a different name, but nothing seems to work. Any ideas? Please and thanks!

    It's actually pretty easy.  You have to merge the markers first.  So, basically...
    1. Import 1 long track (live performance, dj mix, etc).
    2. Set your markers.
    3. Go to the markers panel and select all your markers
    4. Right-click and select "Merge Selected Markers"
    5. Export your tracks -- File > Export > Audio Within Markers
    Done. 10,000 Points please Adobe.

  • Both my Wifi and my iCloud backup are greyed out.

    My wifi and iCloud backup are greyed out on my Iphone 4S and i can't switch them on. I have erased all content and then restored it but it doesn't work. What should I do to fix it?

    Use this article: support.apple.com/kb/ts1559
    Follow all of the troubleshooting steps.  You can even try restoring the device as new: support.apple.com/kb/ht4137
    If the wi-fi remains greyed out, your device needs service.
    If within warranty, it should be free.
    If not, it will probably cost $199 USD + tax.

  • Since updating to Yosemite and CS6 2 of my print options are greyed out on my epson R2880 print pane?

    My colour and colour settings options are 'greyed out' on my  Epson printer pane since updating to Yosemite and CS6,this happened before after running a software update on the printer driver! The driver version at that time was 6.62 and now it has updated to version 9.00....could this be the problem??

    That's strange ... did you try restarting before printer install? You also may need to delete the printer itself (System Preferences > Printers & Scanners) and add it again , in order to access the proper drivers (?)
    Can you show screen shot(s) of your incomplete print dialog?

Maybe you are looking for

  • Database fields at runtime and freetext search

    Hi, We have started to look into Kodo 3.0 and have used the reversemappingtool for generating java classes for our current database layout. We are considering if we should use Kodo/JDO to refactor some of old code. In our old system we have some feat

  • TCS2 - Cross References between linked Frame files not working

    Hi, All the cross-references in my linked in FrameMaker 9 files work when output in PDF, however, when outputting WebHelp from RoboHelp 8, FrameMaker cross references that reference another FrameMaker file (i.e. not Current) do not work. The format i

  • Why won't Lexmark T430 printer with Snow Leopard?

    Lexmark T430 will not printer with Snow Leopard. Error Message: "The printer software was installed incorrectly. Please reinstall the printer's software or contact the manufacturer for assistance." The printer is connected via Ethernet from an iMac;

  • SATA DVD Writer,Y the system cannot detect??

     ??? I just bought a SATA DVD writer, after fix on the PC SATA 1 slot,it seem that the PC cannot detect it. Any thing need to be done? Pls enlighten. MB:865PE Neo2

  • User exit / badi for txn: FBCJ

    Hi experts, After posting FBCJ entry we are passing one more entry with FB01, My requirement is to automate the entry from FBCJ. Can we pass FB01 entry as soon as we post FBCJ  by using user exit / badi. I tried the badi "CJ_DOCUMENT" but it fails ev