TS4062 restored iphone from icloud so I could have all my old photos but now I cannot get it to restore or sync with itunes either by cable or by wifi. I have tried with automatic download off/on, I have had red circles, hours of syncing, nothing, help!!

restored iphone from icloud so I could have all my old photos but now I cannot get it to restore or sync with itunes either by cable or by wifi. I have tried with automatic download off/on, I have had red circles, hours of syncing, nothing, help!!

Seems to be a common issue in discussions. Try this:
http://support.apple.com/kb/ts1538
And let me know if it helps,

Similar Messages

  • HT4500 I downloaded my hard drive contents from a hard drive Holder to my lap top. I have all of those files but now I cannot find the original pictures and such from the computer before the trasnfer. Hoe do I get them back without losing what I just tran

    I down loaded my entire contents of my desk top hard drive to my lap top. Now I don't know where my original files and pictures are. How do I find them or down load just what I am missing with out losing what I just installed ?

    Hi Again, Well I found Carbon Copy Clone on my old hard drive so I didn't even need to download it. I just dragged it onto my desktop and I did as you said.  Using CCC and within the folder of users which has my folder of old hard drive there now shows a file called.autodiskmounted (whatever that means) and then it has a version of my hard drive below that called hard drive 1, which has nothing, but above both of these folders, there is a folder with an old user name which shows up empty on the hard drive when I search it, but actually shows lots of folders on the CCC. So without getting too excited, it lists some folders and amongst them are folders I cant see normally in the old hard drive, like my safari settings and favourites, and movies music and pictures. However in the movies pictures and music folders I can only see a  blackish square that looks a bit like a blank screen with the text.localised after it .
    Does this mean anything to you / Is there  apossibility they may be there? When I selected my new laptop as the destination i got this message below so I did not proceed any further as I'm not sure it will back up the files I need..
    To avoid system instability, CCC has applied a filter that will exclude system files from the backup task.
    If you would like to restore your Mac OS X system files, restart your computer from the backup volume and try the backup task again.
    If you are trying to restore a single item or folder, click the "?" button for additional suggestions.
    Is it worth giving it a try? Thanks for this btw, its further than I've got before!!

  • HT4859 How to restore iPhone from iCloud backup

    How can I restore iPhone from iCloud backup with out resetting my iPhone

    The only way to restore an iCloud backup is to start by erasing the phone.   Go to Settings>General>Reset, tap Erase All Conent and Settings, go through the setup screens on the phone and when given the option, choose Restore from iCloud Backup.

  • What happened is that my internet connection was not good so i downloaded .ipsw file from a torrent but now i cannot get it to update my ipad because ios 5.0.1 is out i tried copying files to ipad updates in the itunes folder but no help

    what happened is that my internet connection was not good so i downloaded .ipsw file from a torrent but now i cannot get it to update my ipad because ios 5.0.1 is out i tried copying files to ipad updates in the itunes folder but it still asked me to download a 700mb software update
    plz help

    If you downloaded the correct version for your iPad model (and the different models have different ipsw files), then you should be able to navigate to it in iTunes by pressing and holding the shift key on Windows (command key on Mac) when clicking the Check For Updates button.
    Message was edited by: King_Penguin

  • Hi, I've just downloaded Aperture 3.2 and transfered all my iPhoto Library but now when I use the Aperture program it runs at the slowest speed possible and is almost impossible to work with. It is constantly processing why is this?

    Hi, I've just downloaded Aperture 3.2 and transfered all my iPhoto Library but now when I use the Aperture program it runs at the slowest speed possible and is almost impossible to work with. It is constantly processing why is this?

    You can click on the text that says 'processing' in the main windows and it will open (toggle) the Activity Window, (can also be accessed via the Window menu -> Show Activity.
    It will tell you what Aperture is doing with more precision and perhaps even how many photos it still needs to process. It is generally best to wait until all that processing is done before you start working with the photos (well it is best to first turn of options what you dont want to use, perhaps Faces or Previews and then let it process the new photos).

  • I have imported a jpeg photo into iPhoto and cannot get the Places map to let me fix a position on the map. It remains disabled for my photo. Checking out the Help file has not given any solution.

    I have imported a jpeg photo into iPhoto  and cannot get the Places map tp show. I have tried the Help file and the information was not helpful. Can anyone give advice here?

    I am using iPhoto 9.1.1. When I select thephoto, then Places I get the window (Places to lookup disabled). When I hit theInfo button I get the size an JPEG notification, and  Faces and Key words. The “reverse” of thepicture shows a window with Rotate, Hide, Trash etc.
    When I select Places, get the Google worldmap, and this case a pin on Sydney Australia showing that eighteen photos arecorrectly placed. I am unable to make the connection to San Francisco wherethis particular photo was taken on a very modern camera.
    Regards,
    Theogt

  • I forgot the passcode for restrictions, i read few suggestions here and tried the ibackupbot, but now i cannot find an o my previous backups in itunes

    i forgot the passcode for restrictions, i read few suggestions here and tried the ibackupbot, but now i cannot find an o my previous backups in itunes.it keeps saying cannot load sync services. i have reinstalled the latest itunes
    please help

    but its nothing there, no music, no apps nothing. i had upgraded to iitunes 11 and went back to 10.7 that is when i lost them. apparenty i havent lost contacts, photos.
    but i have backed them up previously. i was using ibackupbot and i can see them all there, but i cant install them back to my phone nor to itunes.

  • Something software related prevented me from being able to boot up my iMAC. The remedy was to wipe the computer of all soft wear and re-inatall everything via my time capsule. All good there.. but now I cannot open Ai and a box stating"Licensing for this

    Something software related prevented me from being able to boot up my iMAC. The remedy was to wipe the computer of all soft wear and re-inatall everything via my time capsule. All good there.. but now I cannot open Ai and a box stating"Licensing for this product has stopped working" and to reference error code 150:30. How do I get my Ai to open?

    Run the cleaner tool and reinstall it properly.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Download CS6 products
    Mylenium

  • Issues restoring iphone from icloud

    Hi,
    Every time I try to restore my iphone from icloud it says, "unable to back up from icloude because wireless connection interrupted".  My phone is plugged in and connected to wi-fi...I also tried having my iphone plugged into my computer while backing up.  Neither worked.  What do I do? 
    Thanks.

    Is your iPhone have a strong Wi-Fi connection? Have you tried testing on another Wi-Fi network?
    Take a look at this Apple document -> iCloud: Troubleshooting restore issues with iCloud Backup
    Troubleshooting issues during a restore
    If you receive an alert during the restore, be sure to note the text of the message, and cross reference it in the Alert Message matrix in the fifth major section of this article. 
    Keep in mind that restoring is dependent on being connected to the Internet, so the faster your connection, the faster your restore will be. However, even with a fast broadband connection, it can often take around 1-4 hours per gigabyte to complete a foreground and background restore. If you are traveling between countries, you may need to allocate even more time. iCloud is tuned to provide you with the best service in the geographical location you most frequently connect from, and in regards to iCloud Backup, the geographical region you created the original backups from.
    If you receive connection errors, or timeouts, while restoring, you should verify your device has a valid connection to a fast Wi-Fi network and that it's plugged into a power source. Then, let it work. A good way to do this is to start the restore an hour or two before you go to sleep. That way, you can input any needed information after the iOS device restarts and the background restore starts, but you will be less likely to use the phone during the background restore. This will allow it to proceed without interruption. Background restore is designed to allow you to use your phone normally, but if you are getting errors, or having trouble completing the restore, it's best to avoid any possible network interruptions and maximize the resources the iOS device can allocate to the restore process, by allowing it to work uninterrupted. Of course, you can check the status of the recovery by unlocking the screen or by reviewing the progress of downloaded applications or Camera Roll content, but in an error-prone situation, it's best to avoid doing work and launching apps unrelated to the restore process.
    As noted earlier, you will receive prompts for your Apple ID and other passwords. This is normal. When you are restoring to a device that you have already backed up from, you should receive fewer prompts to re-enter passwords, but if you are restoring to a new device, it is expected that you will have to re-enter your passwords again. This is done to preserve the integrity of your accounts.

  • TS3988 Restore iPhone from iCloud

    I just got a new iphone 4. The dealer started it up. When I got home I wanted to restore it from iCloud? Can't figure out how.

    Welcome to the Apple Support Communities
    To restore a iCloud backup, first you have to erase your phone. To do it, open Settings > General > Reset > Erase All Content and Settings.
    Then, your phone will be erased and you will have to set it up again. During the setup, it will ask you to restore a backup, so select the option to restore a iCloud backup and follow the steps

  • I am setting up my Iphone 6 but keep getting an error message "cannot restore backup from Icloud...I backed up my old Iphone 5 just yesterday...Any suggestions?

    During setup of Iphone 6 I keep getting error message "cannot restore backup" from Icloud.  I backed up my old Iphone 5 yesterday.  Is it because of different operating systems? Please help. Thanks!

    Does your iPhone 5 IOS is later than iPhone 6 IOS?
    If true, you need to update your iPhone 6 before you can restore from your backup.
    If not, is iPhone 6 connected to power supply?

  • HT4859 Restore iPhone from iCloud

    I am trying to restore my iPhone from iCloud after initial new phone install

    I need to restore my iphone from an icloud back up. I only see laast nights backup.  Is that the only one available.  I want to restore a text message that was deleted from two days ago.  Is this possible?

  • I bought a new iPhone and only photos from the last 30 days were transferred to my photostram on icloud. I thought icloud was the storage for all my old photos. How do I access the old photos on icloud?

    I bought a new iPhone 5. Only photos from the last 30 days were transferred to my photostream on iCloud. I thought iClud was the storage for all the old photos. How do I access the older photos than 30 days on iCloud?

    janqfromnor wrote:
    I bought a new iPhone 5. Only photos from the last 30 days were transferred to my photostream on iCloud. I thought iClud was the storage for all the old photos. How do I access the older photos than 30 days on iCloud?
    Where, exactly, did you read anything from Apple that suggested that iCloud Photostream was permanent storage?

  • I now have Lion on my laptop, and now I cannot get Word, or Office or anything. Do I have to buy the new Microsoft for Mac

    I now have Lion on my laptop, and now I cant get Word, or Office or any of my Microsoft for Mac stuff to work. Do I have to buy a new version of all this now that the operating software is Lion instead of leopard?

    Support for Office 2004 went away when Lion adandoned support for the Rosetta emulator that let Snow Leopard and earlier run old PPC programs like Office 2004 on an Intel Mac.
    The first version of Office that runs natively on an Intel Mac is Office 2008. The current version is Office 2011 and should offer no problems.
    Your choice of Office version depends on whether you count on Entourage as your mail client. Office 2008 was the last version to include Entourage. With Office 2011, Entourage was replaced by a Mac version of Outlook BUT you must buy the more expensive "business" version to get Outlook. It does not come with the more affordable "Home/Student" edition.

  • TS4036 could not sign in server error when trying to restore iphone from icloud

    I am trying to restore my iPhone from an iCloud  backup.  I deleted everything on the phone per restore instructions. Connected to wireless on iPhone.  Logged on to my iCloud account.    Told the iPhone to restore from iCloud backup.  I keep getting ""could not sign in" server error OK.  I get this messge over and over.

    I actually noticed when I had this problem just now that my iPhone 4 wasn't on wif. Only connected to 3G even though I entered my network info and clicked connect. So I backed up a few steps and re selected to connect to wifi and it fixed my issue!

Maybe you are looking for

  • Error message in JDeveloper

    I keep getting the following error message when trying to execute a custom package: Error starting at line 1 in command: call xxnwu_bud_vacant_pkg.GET_POSITIONS ('31-JUL-2009', 3001) Error report: SQL Error: ORA-04063: package body "APPS.XXNWU_BUD_VA

  • ATI HD5770 and 2008 Mac Pro - Only DVI Port works

    I went through 4 ATI Radeon HD 2600 video cards since 2008. Enough is enough.  I bought a ATI HD5770 and i hope this is the end of it.  However, I have two monitors and I am unable to use the second monitor. The main monitor is hooked into the DVIPor

  • Portal Entitlements for user defined objects

    Hi, The UUP aggregates the user profile information from different backed data sources. One of the properties in the propertyset is a multivalued property. I populate this by the following code: PropertyMapKey propertyMapKeyM = new PropertyMapKeyImpl

  • Can recortsets be used as includes

    i have a few recordsets in one page and the page is becoming sluggish, is it possible to set them on a new page and have them as includes or do they need to be on the same page thanks

  • Export Issue - Aperture 3

    Yesterday I finally upgraded to Snow Leopard (I know, it takes me a while to do such things). Once that was complete I upgraded from Aperture 2 to 3. Everything finished processing about 2 hours ago (no more spinning "gear"). I'm attempting to export