TS4268 I am being charged for international msgs which i haven't sent to a number of the UK.i tried to activate my iMessage and FaceTime using wifi but then it didn't connect. all settings have been turned off but my acc. is being charged.what to do?

I am being charged for international msgs which i haven't sent to a number of the UK.i tried to activate my iMessage and FaceTime using wifi but then it didn't connect. all settings have been turned off in my phone! i also have reset my phone with all the settings. but when i contacted my carrier, he said that the balance deduction is because of the international messages i have sent, but i have sent NONE! every time i switch on my phone, balance gets deducted. imessage and facetime are all disabled! but then the problem started since yesterday when i tried to activate them but had disabled them all at the next moment! but the charges are still being applicable for some international messages as per my mobile carrier. what to do? is there some problem with my phone or carrier?

I am being charged for international msgs which i haven't sent to a number of the UK.i tried to activate my iMessage and FaceTime using wifi but then it didn't connect. all settings have been turned off in my phone! i also have reset my phone with all the settings. but when i contacted my carrier, he said that the balance deduction is because of the international messages i have sent, but i have sent NONE! every time i switch on my phone, balance gets deducted. imessage and facetime are all disabled! but then the problem started since yesterday when i tried to activate them but had disabled them all at the next moment! but the charges are still being applicable for some international messages as per my mobile carrier. what to do? is there some problem with my phone or carrier?

Similar Messages

  • TS4268 I updated my iphone 5 to the new ios 7, well now my imessages and facetime wont work!! I have tried everything! So went to go restore my iphone throw itunes and well the backup was taking hours, so i went to cancle it now it wont do anything!!

    Need help!! How do i cancle my backup? It wont let me do anything! Trying to get my imessages and facetime to work

    Hi Natasha,
    Below is a copy of my post in another thread on this topic. I'm not sure which country you are from, but hope it's helpful.
    Possible fix for Australian users on Telstra and using Tango
    I'm using the iPhone 5S with iOS 7.0.1 on a contract with Telstra in Australia and have been experiencing the problem with iMessage and FaceTime not activating. My iPhone 4S on iOS 6 worked perfectly on the same network however.
    I seem to have now fixed this issue by removing the Tango app (it is similar to Skype). Reading through this thread and seeing the refernces to TuGo triggered my solution, although I believe the 2 apps are entirely unrelated (just have a similar sounding name).
    This fix may have been co-incidental, given that I had to wait quite a while for a sync with iTunes to complete. After syncing, I didn't check the settings for Messages and FaceTime to see if they had been activated. I just went straight to the Tango app on the iPhone and deleted it - hey presto, instantly both Messages and FaceTime were activated.
    Hope this helps others in Australia who may have Tango installed, and are on the Telstra network.
    John

  • TS3230 Safari Extention "Security 1.0" do not uninstall from the list and is crashing Safari. I cant even open it. I have to turn off the extensions in order to use Safari.

    Safari Extention "Security 1.0" do not uninstall from the list and is crashing Safari. I cant even open it. I have to turn off the extensions in order to use Safari.I delete all extensions from the /Library/Internet Plugins and ~/Library/Safari/Extensions except for this extension
    WebSecurity.plugin          WebSecurity32bit.plugin and WebSecurity.safariextz respectively.
    If I tried to uninstall it it crash my Safari and when it reopens, it is still there.
    The most anoying is this question for every site. Any help?

    Uninstall the whole worthless "WebSense" product.
    Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
    Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
    Back up all data before making any changes.
    You will generally have to reboot in order to complete an uninstallation. Until you do that, the uninstallation may have no effect, or unpredictable effects.
    If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

  • Im just really annoyed.  I turned off my data when I barely went over at 4.004 before I went to bed. I just recently checked it to make sure it wasnt using data, But it had gone up to 4.037, after my data had been turned off.  So I want to know what the d

    Im just really annoyed.  I turned off my data when I barely went over at 4.004 before I went to bed. I just recently checked it to make sure it wasnt using data, But it had gone up to 4.037, after my data had been turned off.  So I want to know what the deal is because thats bogus.

    No need to worry jsanders9! We would be delighted to clarify. Please keep in mind that data usage can be delayed for up to 48 hours. To get the most up to date usage we recommend dialing #DATA send from your VZW device, thanks!
    MatthewS_VZW
    Follow us on Twitter @VZWSUPPORT

  • TS4268 not able to activate my imessage and FaceTime...

    not able to activate my imessage and FaceTime...it was working earlier but now it has stopped and just shows waiting for activation and then activation failed. have restored all the possible options but to no avail.
    this happened after i had done the erased all setting restore after which i am facing this above mentoned issue. since this issue has come up i have used all the restore options but this issue has not yet solved
    Please help

    http://support.apple.com/kb/TS4268

  • How can I access data on an external drive in my mac after all folders have been turned into .lnk files? I am desperate!

    I don't know what happened, I connected my external hd today and all files had been turned into that!

    I know I am going to sound really stupid when I ask this, but how do I do that? There was this folder called Recycle Bin, which I have deleted already but the files are still in the same format. I know they are in the HD 'cause of the space taken up in it, but I would like to know exactly what to do to clear the malware altogether and have access to the stuff I have again.
    Thank you very much in advance and sorry for being such a dummy

  • Fixed "network settings have been changed" message but now can't network

    As per suggestions, I deleted the files suggested, the message disappeared, and I reentered my network settings. But, now I can't connect to my laptop from my desktop. I can connect from my laptop to the desktop just fine, but when I try and connect in finder (and I tried connecting through network and through going to the laptop's ip address), it just spins for a while and then stops. Any notions?
    The com.apple.nat.plist file didn't regenerate, but I put an old one in. Didn't seem to solve the problem.
    Thanks!

    Ok, now I've gone and put back the original files in the hd/library/preferences/systemconfiguration folder. I've got the annoying "your network settings have been changed" message in my network window, but I still can't network to my laptop.
    Help?
    FYI: The desktop is an old 2ghz x2 G5 running 10.4.11 and the laptop is a new MB unibody running 10.5.5
    Message was edited by: chriskam

  • HT5538 Hi there. I have tried everything to make iMessage and FaceTime to work with my number but it won't let me do it. I am moreover concerned as I have another sim forum my same carrier and it works fine with iMessage and FaceTime. I I really need help

    Hi I have tried all the tricks from the support to have iMessage and FaceTime running but it is impossible for me to activate these apps with my phone number. Problem is I have another sim from the same carrier and I am able to do it on that one.
    I am desperate for a help!
    Thanks a lot

    Can you make phone calls on the phone that won't activate?   Is it only iMessage and Facetime that isn't working?   What about data - can you access the internet?
    Your last statement didn't make much sense to me:  " I still can have the apps working but only from an email"
    Pls explain that clearly.

  • HT204053 I have changed my Apple ID due to cancellation of my old email address. Now I can't download updates for apps under old ID. Why, when all settings have been changed on all my devices & in iTunes.

    Why after changing my apple Id can I not down load updates to my devices. I've changed all settings to new Id & even tried to do updates through iTunes but keeps referring back to previous Id which had to be cancelled due to email address change. Please help me find a solution to this problem. thanks.

    Go to Settings>Store>Apple ID, tap the ID shown, sign out, sign back in with the new ID.  However, app updates for your apps purchased with your older ID will always ask for the password for this ID.  (Apps are permanently tied to the Apple ID used to purchase them.)

  • I have lost my camera icon and my app store icon.  I have tried to reset and even tried to restore factory settings...no luck.  Restrictions have been turned on, but I do not have the passcode.  Any suggestions??

    I have lost my camera icon and my app store icon.  I have tried to reset the iPod and even tried to restore factory settings....no luck.  Restrictions seems to have been set, but I do not have a pass code.  Any suggestions???

    I have gone through the router reset for home network, Router reset at work. Restarted my personal hotspot on my iPhone that is running the same IOS.
    I have performed the Network settings reset on the iPad.
    I have performed a hard reboot on the iPad, (Home button and power button until logo appears)
    Also I had to update the Apple driver on my laptop for iTunes to see my iPad after I had updated iTunes, I'm not sure if I lost wifi after I updated the iPad IOS or updating iTunes.

  • Why all settings lost from turning off power to Airport Express?

    QUERY: Am I required to keep the Airport Express unit powered continuously forever after now, or have to re-enter all the network names and passwords every time the power is turned off?
    I just bought Airport Express station a few weeks back. It's downstairs next to the cable modem and my 7-year-old iMac purchased in 2004, which has no wireless capability. There is NO cable outlet OR telephone line upstairs near brand new iMac, which is WHY I BOUGHT THE AIRPORT EXPRESS; I didn't want to string a 100-foot ethernet cable upstairs.
    Monday a very patient Apple tech guy talked me through getting it set up, which involved my racing up & down the stairs, re-setting the unit to clear my unsuccessful data inputs from the previous week, watching and waiting for the unit amber light to turn green, then in-putting the new data. With the tech guy's help, it worked fine.
    Since the unit gets HOT while plugged in to the socket, I switched off the power strip. (My disabled brother and I live together, and we have to share a single connection to the internet. I'm away from home during the day, so this has worked fine when we used ethernet cables and a hub seven years ago.)
    BUT now the very first time I've powered up the Airport Express since it was working FINE, it's NOT working. Amber light just blinks slowly forever.
    I'm posting this from my SEVEN-YEAR-OLD iMac, 'cause the Airport Express evidently needs to be reset. Since following the instructions the FIRST time DID NOT WORK, I wanted to find out if powering down the Airport CAUSED the data to evaporate, before calling Apple again. Hey! I've been working with Macs, teaching computer graphics and working in interactive games for 3 decades! But clearly, there are GAPS in my understanding.
    Thanks for any comments.
    - David March, crazed animator & fiddler
    www.davidmarch.org

    try restarting all of them

  • Task List Alerts keeping sending, even though alerts have been turned off

    We have about 12 or 13 task lists, which have between 15-25 tasks per list. Originally, the task lists were setup to have an alert on each task to send past the due date. We realized after the due date that this was sending way too many emails, so we turned off the alert on all tasks other than the last one on each list. We continue to get email messages for every task every day (and when you have have multiple task lists, the number of emails can be overwhelming).
    When we turned the alert off, should that not have stopped those messages from sending? Is there something else we can check to try to find the root cause of this issue? We don't want to stop the application from sending emails all together, but we want all the alerts that we removed to stop coming in.
    Thanks!

    There are no viruses that affect iOS.  There is no way the device could be infected unless it was jailbroken which would void your right to support from Apple and these forums.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • How do i get rid of old files previously networked to Distributed Sytem Manager so as to create a new network file, all files have been deleted off my laptop already?

    6 old network files keep showing up in Labview even though they have been deleted from both labview and removed from my laptop. Why does labview insist on keeping them in this history as now it will not allow me to network a new file
    All help appreciated.

    Got this issue resolved, basicaly what was happening was in the distributed system manager old copys of libraries which I had created previously and deleted kept showing up in my networked items and i could not delete them, what i had to do was to stop process and remove process on any that were showing up then reboot my laptop and this deleted them off the system altogether, this was time consuming for me as I had a load of old libraries to delete before i could network my new library. Eventually got it working after my laptop reboots.

  • How do I install DPS Desktop Tools where manual updates have been turned off?

    I'm using AAMEE 3.1 for deployment across a higher education campus. I turned off updates in the initial install process planning to use AAMEE to create packages and ARD to deploy them.
    I need to install the Digial Publishing Desktop Tools (http://www.adobe.com/support/downloads/product.jsp?product=182&platform=Macintosh) but I can not manually install updates on the clients, and AAMEE is not accepting adding the update to the workflow.
    Suggestions?

    hi,
    Yes, you can temporarily enable the updates. Just rename the file AdobeUpdaterAdminPrefs.dat present at path
    /Library/Application Support/Adobe/AAMUpdaterInventory/1.0/AdobeUpdaterAdminPrefs.dat . Then you can apply the updates you want on the machine. Once you are done, just rename it back to its original name and the updates will be suppressed again.
    Thanks,
    Saransh Katariya |Adobe Systems | [email protected]

  • How do I remove plug-ins?  I have "extensions" turned off but am unable to use any internet games - receive error message saying to remove plug ins

    Since  a recent software update I've not been able to use any internet games - says to remove plug ins.  I have turned off all extensions and followed other online advice to remove plug ins, but the games still do not work

    I am getting an error with iTonerSupport not in 64bit mode.
    It seems in my case this folder: /Users/[yourusername]/Library/iTunes/iTunes Plug-ins is no longer viewable in the finder window.
    I had to navigate to this folder via the terminal comand line and delete the iTonerSupport.bundle using rm -r command.
    Hope this helps.

Maybe you are looking for

  • ITunes account for my daughter (10)?

    iTunes does not allow me to create an account for my daughter (10). That is, if I tell the truth about her age. I'd like to give her an account without a credit card, but only using iTunes gifts. But that seems to be not possible. How do people solve

  • Using dynamic ViewLinks with JDeveloper 10g

    Hello. I'm displaing a list of data from tab1 with a sublist of data from tab2, which has a n:m cardinality relationship. Attributes: k1 - primary key of tab1 k2 - primary key of tab2 fk1 - foreign key of tab1 in rel fk2 - foreign key of tab2 in rel

  • Network connection not working

    I did an FTP install off the boot CD, everything went fine there. After I reboot and startup Arch linux, I get a FAILED message when it tries to start the network. I have my eth0 set to "dhcp" and INTERFACES set to (lo eth0) in rc.conf. I've used oth

  • SQLdeveloper 4 - Navigating packages in connection window doesn't work

    Hi Can't navigate (large ) packages in connection window. It was possible in version 3.2.  by clicking funtion/procedure name. Now I have to scroll the package or search for the function-name. regards Karsten

  • DBMS_XMLSTORE parsing with other ROWSET tag

    Hi, I've got XML content stored in a CLOB which I want to store in a relational format. I use the DBMS_XMLSTORE package to do this job. This works as long as my ROWSET tag is <ROWSET>. I wonder if there is a possibility to allow another tag like <USE