TS4425 I tried this on my iPad.  The but did not get any terms and conditions.  Photo stream works fine on the iPad but not on Apple TV.  What do I do?

Followed the instructions but they don't work.  On the iPad I got no new T&Cs and it works fine.  So I have no means to agree the new T&Cs and because of that it does not work on Apple TV. 

Personally I think the iOS devices are poor at reconnecting  - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
Something along those lines anyway.
I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
AC

Similar Messages

  • Where is the "accept" button for iTunes Store Terms and Conditions on the iPad?

    Where is the "accept" button for iTunes Store Terms and Conditions?  Can't use iTunes on my iPad without accepting conditions.

    Which tab in the iTunes app are you in ? If you are in the Downloads tab then the Ts & Cs link shows if you don't have any outstanding downloads - your download and synced films and TV shows should be in the Videos app and your music, audiobooks and audio podcasts in the Music app

  • I've downloaded movies from the iTunes store to my iPad but when I want to play them, I get the message... iTunes Store Terms and Conditions but when I follow the link it still doesn't let me play my movies. What am I doing wrong?

    I've downloaded movies from the iTunes store to my iPad but when I want to play them, I get the message... iTunes Store Terms and Conditions... but when I follow the link it still doesn't let me play my movies. What am I doing wrong?

    Easy maybe, but a lot of users are used to playing the movies in iTunes on their computers so that is the first place they turn to on the iPad.
    Enjoy the show!

  • HT1904 I cannot access iTunes on my iPad. When I click the iTunes button, it shows terms and conditions and when I click the terms and conditions link, it takes me to the Internet and that is it. Kindly help.

    I cannot access iTunes on my iPad. When I click the iTunes button, it shows terms and conditions and when I click the terms and conditions link, it takes me to the Internet and that is it. Kindly help.

    If you are just seeing the Terms and Conditions link in the Downloads tab then that just means that there aren't any downloads waiting. If you want to browser the store then can are you not able to tap on the other tabs at the bottom of the app ?
    If you are looking for your downloaded and synced content then they won't be in the iTunes app (that is just the store)  - your music, audiobooks and audio podcasts will be in the Music app and your films and tv shows in the Videos app.

  • I am having the same problem that Paul Birgy is having.  It was working fine until the update.

    I am having the same problem that Paul Birgy is having.   I can send email from my program but now the reciever cannot read it.  Before the update my emails I sent from my program were readable by the reciever.

    I send out invoices from Peachtree Premium Accounting 2005.  I click on the email icon on top of page and it goes to Microsoft office outlook 2007.  It shows as an attachment and in the message it tells the receiver they need adobe reader installed in their computer to read it.   It was all working fine until the last update for adobe reader. 
    Now they get error message.   Adobe Reader could not open "Invoice #106.PDF" because it is either not a supported file type or because the file has been damaged (for example it was sent as an email attachment and wasn't correctly decoded.)
    This started March 3, 2010.  Since then I have been faxing out of the Peachtree program. That still works fine. 
    This problem seemed to start right after one of the updates.  I was told to try and reinstall Adobe Reader.  I have tried that twice and still have the same problem. 
    To the best of my knowledge I have not had any problems with Peachtree. 
    Cathy
    Date: Tue, 25 May 2010 14:40:25 -0600
    From: [email protected]
    To: [email protected]
    Subject: I am having the same problem that Paul Birgy is having.  It was working fine until the update.
    Sounds like either
    A. Something in your accounting  software is corrupting the file or;
    B. Something in  your email is corrupting the file (some email providors use compression  to make the transfer faster which can mess up a PDF).
    What  hapens when they try and open it? Do they get an error message? If so,  what is it (this matters)?
    At any rate, it's doubtful  that this is a Reader issue but give us some more detail and maybe  someone can help here.
    >

  • MY iPhone 4 after  being updated to iOS7 will not download or update any apps. When i press the button on my device to download a new app the loading wheel appears then in a few seconds disappears. I dont get a terms and conditions screen or anything.

    MY iPhone 4 after  being updated to iOS7 will not download or update any apps. When i press the button on my device to download a new app the loading wheel appears then in a few seconds disappears. I dont get a terms and conditions screen or anything.

    Ive tried using wifi and 3G seperately. Ive tried restarting the phone. Ive tried restoring it from a backup but none of these have worked yet.

  • So I just bought an iPhone 5s and Touch ID was working fine until the software update is that a bug ? Because I don't think my home button broke

    So I just bought an iPhone 5s and Touch ID was working fine until the software update is that a bug ? Because I don't think my home button broke

    Have not heard of that but here is what I would do - test after each step to see if the problem is solved
    1. Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    2. If that does not work - back up to iTunes and restore to factory settings
    3. Check to see if the problem is resolved before restoring from backup

  • I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

    # Question
    I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • HT1766 I Have tried to update to iOS 7 but the iPad has locked on the Terms and Conditions page .I cannot agree to the conditions.Ideas please on how to get the iPad working again.

    having attempted to upgrade to iO7 latest op system,the Ipad has stuck on the Terms & conditions page.It will not accept my agreement to terms and conditions or allow me to read them.
    Ideas please on how to get it to work again,which will have to be via my lap top!
    It sound as if the iPad is woking in the background-i.e.receiving eMails.

    Reset iPad and continue with update.
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • I was working on a project a few days ago and now I'm not getting any audio or visuals out of it. In the project file the screen went grey. Not sure how to fix this. I'm new to iMovie, but the program seems easy to use and my Mac is new. Any help?

    I used to use Movie Maker and it would be able to handle lots of file uploads and big projects. I figure iMovie can do the same since it's newer and it's on my iMac. I was working on a project for a few months, it was working fine up until about a few days ago when the project file just stopped working. Not getting any audio or visuals and the screen went grey. I hope to not lose the project file as I've spent a lot of time on it. The project will still show up in iMovie, but it won't play. Other project files will, but this one won't for some reason. It's my first time using this program and I assumed it would be fine, but now it's causing me big problems. Anyone else run into a similar problem?

    But it is I jsut can sync, back up files, or anything becuase its stuck at this screene and wont do execute when i click either of those button

  • My ipad 2 is blocked on Terms and conditions screen, it doesn't allow me toaccept or not accept and continue with the last steps of configuration, ihacve updated to ios 7.0

    I have installed the new io 7.0, and when it is on the way to configure all functions, after the ICloud, when terms and conditions confirmation apperas, it is stucked

    Reset iPad and continue with update.
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Why will IMAP email not send from Mac OS 10.10.1 Yosemite Mail even though it is configured the same as on my old Macbook (and emails are sending just fine on the old computer)?

    I can receive but cannot send IMAP email on my 1&1 mail account from Mac OS 10.10.1 Yosemite Mail on my new Macbook Pro. The account is set up the same port, password, username, server name as on my old Macbook and emails are sending just fine on the old computer.
    When I hit send on the new Macbook Pro running Yosemite I get this message:
    "The connection to host ... on port 993 failed.
    Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be sent."
    It shows the server as (offline)
    I've tried erasing and typing in the password.  I've tried both checking and unchecking Automatically detect and maintain account settings. Still cannot send.
    I also have a Gmail account and it is working...

    email service uses an Incoming Server and an Outgoing Server. Mac Mail makes access to the Incoming Server(s) obvious, and hides the settings for the outgoing Server(s). A quick and easy way to get access to the Outgoing Servewr settings is to use:
    Window > Connection Doctor ...
    ... then click on the red light for the Server that is not working for you to see its settings.
    This web page will make an educated guess about how to set up your Servers, and NO SPAM will follow:
    https://www.apple.com/support/mail-settings-lookup/

  • Need to Print "Terms and conditions" on every back side of the page

    Hi All,
    i have requirement like need to print "Terms and Conditions" text on every back side of page using adobe form.
    i have tried options like created created 4 pages in master page and defined flow content page1->page3, page2->page4(terms and conditions). but when we execute less items of the billing number got the 3 pages i.e page1 having item data, remaining 2 pages displays the  "terms and conditions" text.
    if any worked on the same kind of requirement please let me know and it would be great helpful to me.
    Thanks,
    Ramana

    Hi,
    One of the option is that you can create 3 pages in the Smartforms, e.g. A, B and C.
    A has print mode "D" (duplex) and next page "B"
    B has print mode " " (unchanged) and next page "A"
    C has print mode " " (unchanged) and next page " " (blank)
    B and C do not have a MAIN window - they just contain the Terms & Conditions  in a secondary window.
    At the end of the MAIN window on page A, insert the command NEW PAGE <C>.
    This will give you a print out that will be in a sequence
    A,B,A,B,...A,B,A,C.
    Regards,
    PP

  • Hello  my question is  why do i get a error message now that I have done alot of updating of my system  it old, but I got it back up and running Itunes was working fine until  in an update of the system files  then Itunes can't burn the play lists to the

    Hello 
    I recently had to reinstall  my software for  a
    dell computer  a dell latitude d 830,  then  after installing all of my software and such  including itunes   the player did well even record to disks  with no problems   now that my system has done alot of updating of  system  files....now the itunes does not burn to my cd...error message   2131  this time ..this  has occurred several times on this sytem and and as well as  other system   this one has  window vista  64 bit  home prem.  why is the itunes not working  to burn my disks
           it worked fine before  the updates to the system and the itunes software is up dated as well...can  someone suggest  something
    thanks for your time in this matter
    sadeyesjlee

    I recently had to reinstall my software for a
    dell computer a dell latitude d 830, then after installing all of my software and such including itunes the player did well even record to disks with no problems now that my system has done alot of updating of system files....now the itunes does not burn to my cd...error message 2131 this time
    The 2131 usually indicates firmware needs to be updated on a drive.
    Head to your drivers and downloads page for your latitude at Dell, and check for updates to your firmware for your optical drives. If you're behind and you update, does that clear up the 2131?

  • Printing Terms and Conditions for each Purchase order in the RDF output

    Hi All,
    Present i have an RDF report with the registered concurrent program. when i run this concurrent program i am getting the terms and conditions at the end of the purchase orders only once(for example 10 purchase orders). Now the requirement is to get this terms and conditions printed for each purchase order. The output is in PDF format. It's an 11i RDF report. Can any one suggest me the methods how to do this? Please give me reply as soon as possible.
    Thankyou in advance
    Regards,
    Polimera

    Hi, Polimera
    Welcome to OTN
    Present i have an RDF report with the registered concurrent program. when i run this concurrent program i am getting the terms and conditions at the end of the purchase orders only once(for example 10 purchase orders). Now the requirement is to get this terms and conditions printed for each purchase order. The output is in PDF format. It's an 11i RDF report. Can any one suggest me the methods how to do this? Please give me reply as soon as possible.
    Take a fixed frame inside the purchase order master repeating frame and place your terms and condition inside the fixed frame.
    Hope this helps
    If someone response is helpful or correct, please mark is accordingly

Maybe you are looking for

  • Windows to Mac os x Leopard

    I want to get a Dell xps computer. I like vista, but Mac os x leopard is just insane. One of the adds said that I could transfer my files to mac files. This made me happy, but I'm not quite shure what he said. Could anyone give me any details on how

  • Help! IMovie 11 went crazy on me & stopped working.

    So, I've been working on a project on IMovie 11' since November w/ music & clips I downloaded from YouTube. I was more than half way finished with it, it was perfect & all of the sudden, it went nuts on me. The first thing that happened is an entire

  • Crazy Matrix Visuals

    I've recently started experiencing some sort of graphics meltdown on my Powermac G5. I don't know much about graphics cards etc., so if anyone can tell me what's going on or where to start troubleshooting I'd appreciate it. It's an old G5, one of the

  • Keep XML Formatting

    I have an external excel spreadsheet that generates an XML file.  The spreadsheet has numbers in an accounting format, but when the XML file is exported and then dynamically imported into Xcelsius, the formatting does not show up.  How can I preserve

  • Adobe Download Assistant Instant Crash

    My Adobe Download Assistant will not open at all. I instantly get the "...has encountered problems and needs to close immediately" message and can't do anything with the program. I've tried to reinstall a couple times now but keep getting this error.