TSV_TNEW_PAGE_ALLOC_FAILED

Dear All,
First let me wish you a very happy and prosperous New Year.
I have one clarification here,
User was running a report with extensive selection,unfortunately the user got the error "TSV_TNEW_PAGE_ALLOC_FAILED"
Then there was shortdump in ST22, saying that " No more storage space available for extending an internal table"
I would like to know that which query was this user running during that time. then i can investigate further what can be done to avoid this problems.
I thank in advance.
Rgds,
Sin
Edited by: sinner icici on Jan 3, 2008 10:57 AM

Hi,
TSV_TNEW_PAGE_ALLOC_FAILED - No more storage space available for extending an internal table.
It is purely the memory issue. you can resolve this by reducing the data selections. For the temporary solution remove the OLAP variable in the data selection if its there and run with less selection It may help and try to use the option in infopackage scheduler as PSA only and Update subseqently in data targets
SAP Note 425207 - SAP memory management, current parameter ranges
SAP Note 972889 - RMCENEUR: Short dump TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Thanks,
JituK

Similar Messages

MEMORY_NO_MORE_PAGING and TSV_TNEW_PAGE_ALLOC_FAILED

Hi All,
We are facing these errors approx. daily (but not everyday):
MEMORY_NO_MORE_PAGING
TSV_TNEW_PAGE_ALLOC_FAILED
Now, I searched the Forum but there is no acceptable answer for the current issue. Some person said that it could be possible if a user have entered any illegal range in program.
How can i modify the parameter values? RZ11 shows all parameters but not in RZ10(where we can modify).
Here is the current configuration:
Roll, extended and heap memory EXTM
ztta/roll_area        3000320    Byte Roll area per workprocess (total)
ztta/roll_first       1024       Byte First amount of roll area used in a dialog WP
ztta/short_area       3200000    Byte Short area per workprocess
rdisp/ROLL_SHM        32768      8 kB Part of roll file in shared memory
rdisp/PG_SHM          16384      8 kB Part of paging file in shared memory
rdisp/PG_LOCAL        150        8 kB Paging buffer per workprocess
em/initial_size_MB    14500      MB   Initial size of extended memory
em/blocksize_KB       4096       kB   Size of one extended memory block
em/address_space_MB   4096       MB   Address space reserved for ext. mem. (NT only)
ztta/roll_extension   2000683008 Byte Max. extended mem. per session (external mode)
abap/heap_area_dia    2000683008 Byte Max. heap memory for dialog workprocesses
abap/heap_area_nondia 0          Byte Max. heap memory for non-dialog workprocesses
abap/heap_area_total 6442450944 Byte Max. usable heap memory
abap/heaplimit        40894464   Byte Workprocess restart limit of heap memory
abap/use_paging       0               Paging for flat tables used (1) or not (0)
I also read that some parameter values like Roll Area should not be changed like here: http://help.sap.com/saphelp_nw70/helpdata/en/02/96274f538111d1891b0000e8322f96/content.htm
Furthermore, some suggestions were to modify the Heap Parameters, Roll etc...
Here is our PRD SPEC:
Processor: Intel Xeon X5450 3.00GHz
RAM: 20 GB
HDD: 140 GB Internal
SAN: 700 GB RAID
Please Advise,
Regards.

Hi Michael,
Thank you for your information, here is the current dump (most recent one):
Runtime Errors         MEMORY_NO_MORE_PAGING
Date and Time          13.10.2010 14:32:19
How to correct the error
     The amount of storage space (in bytes) filled at termination time was:
     Roll area...................... 16192
     Extended memory (EM)........... 305858320
     Assigned memory (HEAP)......... 0
     Short area..................... " "
     Paging area.................... 16384
     Maximum address space.......... " "
And Current View EM (in ST02):
SAP Memory      Curr.Use % CurUse[KB] MaxUse[KB] In Mem[KB] OnDisk[KB] SAPCurCach HitRatio
Roll area           40.18     24,274     24,976     262,144          0   IDs           99.59
Page area           10.94     28,678     34,400     131,072    131,072   Statement     97.00
Extended memory     31.43 4,665,344 5,296,128 14,843,904          0                  0.00
Heap memory                  139,015          0     139,015          0                  0.00
Detailed Information:
Roll memory     Dialog session   kB      2,930
                Nondialog sess. kB      2,930
                Available        kB     60,416
                in shared memory kB    262,144
                on disk          kB          0
                Used             kB     24,274
                Maximum used     kB     24,976
Paging memory   Session buffer   kB      1,200
                Available        kB    262,144
                in shared memory kB    131,072
                on disk          kB    131,072
                Used             kB     28,678
                Maximum used     kB     34,400
Extended memory Dialog session   kB 1,953,792
                Nondialog sess. kB 1,953,792
                Available        kB 14,843,904
                Used             kB 4,665,344
                Maximum used     kB 5,296,128
Heap memory     Dialog session   kB 1,953,792
                Nondialog sess. kB          0
                Used             kB    139,015
                Maximum used     kB    139,015
Current Parameters Setting:
Buffer Name                    Comment
Profile Parameter     Value      Unit Comment
Roll, extended and heap memory EXTM
ztta/roll_area        3000320    Byte Roll area per workprocess (total)
ztta/roll_first       1024       Byte First amount of roll area used in a dialog
ztta/short_area       3200000    Byte Short area per workprocess
rdisp/ROLL_SHM        32768      8 kB Part of roll file in shared memory
rdisp/PG_SHM          16384      8 kB Part of paging file in shared memory
rdisp/PG_LOCAL        150        8 kB Paging buffer per workprocess
em/initial_size_MB    14500      MB   Initial size of extended memory
em/blocksize_KB       4096       kB   Size of one extended memory block
em/address_space_MB   4096       MB   Address space reserved for ext. mem. (NT on
ztta/roll_extension   2000683008 Byte Max. extended mem. per session (external mo
abap/heap_area_dia    2000683008 Byte Max. heap memory for dialog workprocesses
abap/heap_area_nondia 0          Byte Max. heap memory for non-dialog workprocess
abap/heap_area_total 6442450944 Byte Max. usable heap memory
abap/heaplimit        40894464   Byte Workprocess restart limit of heap memory
abap/use_paging       0               Paging for flat tables used (1) or not (0)
Please guide me if it requires any further analysis.

Short Dump       TSV_TNEW_PAGE_ALLOC_FAILED

Hi All,
I am facing the short dump "TSV_TNEW_PAGE_ALLOC_FAILED" problem in my PRD system.
Please find ST22 log and suggest the solution:
Runtime Errors         TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time          18.11.2009 12:12:09
Short text
     No more storage space available for extending an internal table.
What happened?
     You attempted to extend an internal table, but the required space was
     not available.
What can you do?
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
     Try to find out (e.g. by targetted data selection) whether the
     transaction will run with less main memory.
     If there is a temporary bottleneck, execute the transaction again.
     If the error persists, ask your system administrator to check the
     following profile parameters:
     o ztta/roll_area            (1.000.000 - 15.000.000)
            Classic roll area per user and internal mode
            usual amount of roll area per user and internal mode
o ztta/roll_extension       (10.000.000 - 500.000.000)
        Amount of memory per user in extended memory (EM)
o abap/heap_area_total      (100.000.000 - 1.500.000.000)
        Amount of memory (malloc) for all users of an application
        server. If several background processes are running on
        one server, temporary bottlenecks may occur.
        Of course, the amount of memory (in bytes) must also be
        available on the machine (main memory or file system swap).
        Caution:
        The operating system must be set up so that there is also
        enough memory for each process. Usually, the maximum address
        space is too small.
        Ask your hardware manufacturer or your competence center
        about this.
        In this case, consult your hardware vendor
abap/heap_area_dia:        (10.000.000 - 1.000.000.000)
        Restriction of memory allocated to the heap with malloc
        for each dialog process.
Parameters for background processes:
abap/heap_area_nondia:        (10.000.000 - 1.000.000.000)
        Restriction of memory allocated to the heap with malloc
        for each background process.
Other memory-relevant parameters are:
em/initial_size_MB:         (35-1200)
        Extended memory area from which all users of an
        application server can satisfy their memory requirement.
or analysis
The internal table "\FUNCTION-POOL=EL40\DATA=GL_NODETAB[]" could not be further
extended. To enable
Error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 2160
Number of rows: 1782088
Allocated rows: 1782088
Newly requested rows: 4 (in 1 blocks)
to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 4419712
Extended memory (EM)........... 2002743520
Assigned memory (HEAP)......... 2000049152
Short area..................... " "
Paging area.................... 32768
Maximum address space.......... " "
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"SAPLEL40" or "LEL40U11"
"ISU_ELWEG_HIERARCHY_BUILD"
Please help me out to resolve the issue.
Regards,
Nitin Sharma

hI cHANDRU,
tHANKS FOR YOUR RESPONSE:
pLEASE FIND BELOW MENTIONED DETALS:
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SVPSAPECP01"
Database type..... "MSSQL"
Database name..... "ECP"
Database user ID.. "ecp"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Nov 18 2008 22:53:36"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 185
Patch text.. " "

BW Error : TSV_TNEW_PAGE_ALLOC_FAILED

Hi All,
While updating data from PSA of an infopackage i got a short dump called TSV_TNEW_PAGE_ALLOC_FAILED.
So,I made the status of infopackage red and deleted the request.
Will the data be there in the PSA?
If yes,then how to upload the data from psa to datatarget.
There are two data targets maintained for this infopackage.
Do i need to schedule the infopackage again.
Please give me the correct solution.
Its very urgent.

Hi,
this eroor normally occurs whent he system is unable to allocate main memory requested by the application.
Now,
if it is a delta,
then you have to make sure that the techynical status is red before delting the req.
Now if full
then delete the red req after forced red in both the data targets and re run the infopackage
contact your basis on this error if required
Hope this helps
Janardhan Kumar

Internal table Memory Issue Exception TSV_TNEW_PAGE_ALLOC_FAILED

Hi experts,
I am working on a conversiojn programme. This programme is dealing with 4 input files.
Each of these files is having more than 50,000 records. I am reading the corresponding application server files to fill
the internal tables related to these files.
The files are being read properly and internal tables are being filled.
However when i try to assign any of these 4 internal tables to other temproray internal tables in programme(requirement)
i get a dump TSV_TNEW_PAGE_ALLOC_FAILED.
The dump is related to memory issue.
I think The memory available in the programme at this point is not sufficient for table assignment.
Please suggest any alternatives where i can save any memory .
Changig of basis setting is not an option.
Regards,
Abhishek Kokate

Hi Kiran,
I am not agree with you , I am agree with Hermann.
While writting file you restrict the record max 5,000 to 10,000 records and process don't store the mutch data into internal table.
After every used refresh the internal table, Declare table where necessary.
But you can try to avoid the copy cost.
Rgds
Ravi Lanjewar

Production error - Urgent - TSV_TNEW_PAGE_ALLOC_FAILED

Hi All,
Im getting dumps in production system with
Runtime Error: TSV_TNEW_PAGE_ALLOC_FAILED. and when checked the trace, it says as Data type "MCVBAPB" was found in a newer version than required.
Any pointers to this wil be helpful
thanks
Booma

the TSV_TNEW_PAGE_ALLOC_FAILED dump has naught to do with the version of MCVBAPB. the dump clearly states that there was no more paging area available to run the report/transaction that caused the dump. this might either be due to an too big selection or a lack of memory. Consult your basis-people with that one.
the version of MCVBAPB: MCVBAPB is a structure belonging to LIS (Logistics Information System) so obviously someone changed that structure. check in t-code SE11, MCVBAPB the runtime and the database object of the structure (in case it is active).

Run time error : TSV_TNEW_PAGE_ALLOC_FAILED in st22

Hi All,
we are getting runtime error : TSV_TNEW_PAGE_ALLOC_FAILED in production system. for this report rsppfprocess we have batch jobs so may be its running all the action definition and coming up with consuming more memory ? we already checked with basis but they are saying its rsppfprocess program issue. can you please guide me how to solve this issue.
Jimmi.

Hi Jimmi,
The error TSV_NEW_PAGE_ALLOC_FAILED means that more memory was requested
because the program needed to expand an internal table, but is not available.
When Extended Memory is used up, the process will go into PRIV mode
as it starts using Heap Memory (or vice-versa). No other user will be able to use this work process while it is in PRIV mode.
If there is enough heap for it to finish, you will not see the error TSV_NEW_PAGE_ALLOC_FAILED and the work process will be freed.
This seems to be a problem with loading of shared memory.
Check value of parameter abap/shared_objects_size_MB in RZ11.
Set the parameter to minimum 250 and increase it when necessary, as per SAP note 1281896. You must start the system newly so that the change becomes effective.
Also take a look at SAP Note 1166259.
Gervase

ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED

Hi,
Please help me. I'm having ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED job cancelled for my payment run F110.
Before this we having performance issue for the payment run F110. We implemented notes (SNOTE 1343823) to solve the performance issue. And today when we wanted to do payment run some of the payment run is automatically cancelled by system.
Tq

hi,
Try this Note 1250607 - Long runtime and high memory reqmt for payment program
thanks and regards
Praveen.J

Runtime errors: TSV_TNEW_PAGE_ALLOC_FAILED

Hi,
When I am trying to check the consistency of background jobs in SM65, It is throwig a runtime error TSV_TNEW_PAGE_ALLOC_FAILED. Kindly look into the below text message from ST22.
ShrtText
    No storage space available for extending an internal table.
What happened?
    You attempted to extend an internal table, but the required space was
    not available.
What can you do?
    Make a note of the actions and input which caused the error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
    Try to find out (e.g. by targetted data selection) whether the
    transaction will run with less main memory.
    If there is a temporary bottleneck, execute the transaction again.
    If the error persists, ask your system administrator to check the
    following profile parameters:
    o ztta/roll_area            (1.000.000 - 15.000.000)
           Classic roll area per user and internal mode
           usual amount of roll area per user and internal mode
    o ztta/roll_extension       (10.000.000 - 500.000.000)
o abap/heap_area_total      (100.000.000 - 1.500.000.000)
       Amount of memory (malloc) for all users of an application
       server. If several background processes are running on
       one server, temporary bottlenecks may occur.
       Of course, the amount of memory (in bytes) must also be
       available on the machine (main memory or file system swap).
       Caution:
       The operating system must be set up so that there is also
       enough memory for each process. Usually, the maximum address
       space is too small.
       Ask your hardware manufacturer or your competence center
       about this.
       In this case, consult your hardware vendor
abap/heap_area_dia:        (10.000.000 - 1.000.000.000)
       Restriction of memory allocated to the heap with malloc
       for each dialog process.
Parameters for background processes:
abap/heap_area_nondia:        (10.000.000 - 1.000.000.000)
       Restriction of memory allocated to the heap with malloc
       for each background process.
Other memory-relevant parameters are:
em/initial_size_MB:         (35-1200)
       Extended memory area from which all users of an
       application server can satisfy their memory requirement.
Error analysis
The internal table "IT_18" could not be enlarged further. To allow
error handling, the table had to be deleted before this log was
created. So, if you branch to the ABAP debugger from the display
of this log, the table will there be displayed with 0 rows.
At the moment of the termination, the following data was
determined for the respective internal table:
Storage location: "Session memory"
Row width: 1296
Number of rows: 1166120
Allocated rows: 1166120
Newly requested rows: 8 (in 1 blocks)
           Last error logged in SAP kernel
Component............ "EM"
Place................ "SAP-Server ord-sapprd_PRD_00 on host ord-sapprd (wp 0)"
Version.............. 37
Error code........... 7
Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
Description.......... " "
System call.......... " "
Module............... "emxx.c"
Line................. 1878
How to correct the error
    The amount of storage space (in bytes) filled at termination time was:
    Roll area...................... 1709536
    Extended memory (EM)........... 408685712
    Assigned memory (HEAP)......... 1190561024
    Short area..................... " "
    Paging area.................... 57344
    Maximum address space.......... " "
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "TSV_TNEW_PAGE_ALLOC_FAILED" C
    "SAPLSBPT" or "LSBPTFXX"
    "DO_TBTCO_CONSISTENCY_CHECK"
    If you cannot solve the problem yourself and you wish to send
    an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
   To obtain this, select in the current display "System->List->
   Save->Local File (unconverted)".
2. A suitable printout of the system log
   To obtain this, call the system log through transaction SM21.
   Limit the time interval to 10 minutes before and 5 minutes
   after the short dump. In the display, then select the function
   "System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, select the Editor function "Further Utilities->
   Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "ord-sapprd"
Network address.......... "10.31.18.27"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "16x Intel 80158"
Character length......... 16 Bits
Pointer length........... 32 Bits
Work process number...... 0
Kindly suggest me the options ASAP as this is happened in the production system.
Thanks in advance,
Suneetha Reddy

Hi Sunnetha,
SM65 is a resource hungry tcode, and always suggested to run during a off-business hours. Try to run when there is not much acvitity going on in the system.
I'm not very much sure, but please check how many entries there in TBTCO table. as the dump gives indication of
DO_TBTCO_CONSISTENCY_CHECK.
Check RSBTCDEL(2) program is running daily or not. This runs as a background job to delete the old job information from the tables TBTC*. If this has not run, then you can run and delete older job logs and then retry.
Which system you're using? ECC or BW??
Note - parameter settings of BW largely varies from that of a ECC system.
Thanks,
Debasis.

Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED during extraction

Hi,
Anyone knows what the solution is to this problem:
Runtime Errors         TSV_TNEW_PAGE_ALLOC_FAILED
|Short text                                                                                |
|    No more storage space available for extending an internal table.                              |
|What happened?                                                                                |
|    You attempted to extend an internal table, but the required space was                         |
|    not available
|Error analysis                                                                                |
|    The internal table "\FUNCTION=CRM_UPLOAD_BTMBDOC_FILL\DATA=ET_BILLPLAN_D" could               |
|     not be further extended. To enable                                                           |
|    error handling, the table had to be delete before this log was written.                       |
|    As a result, the table is displayed further down or, if you branch to                         |
|    the ABAP Debugger, with 0 rows.                                                               |
|                                                                                |
|    At the time of the termination, the following data was determined for                         |
|    the relevant internal table:                                                                  |
|                                                                                |
|    Memory location: "Session memory"                                                             |
|    Row width: 1908                                                                               |
|    Number of rows: 35912                                                                         |
|    Allocated rows: 35912                                                                         |
|    Newly requested rows: 8 (in 1 blocks)                                                         |
|    Last error logged in SAP kernel                                                               |
|                                                                                |
|    Component............ "EM"                                                                    |
|    Place................ "xxx"                   |
|    Version.............. 37                                                                      |
|    Error code........... 7                                                                       |
|    Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "                  |
|    Description.......... " "                                                                     |
|    System call.......... " "                                                                     |
|    Module............... "emxx.c"                                                                |
|    Line................. 1897                                                                    |
|                                                                                |
|    The error reported by the operating system is:                                                |
|    Error number..... " "                                                                         |
|    Error text....... " "                                                                         |
|How to correct the error                                                                          |
|    The amount of storage space (in bytes) filled at termination time was:                        |
|                                                                                |
|    Roll area...................... 6221152                                                       |
|    Extended memory (EM)........... 1826778184                                                    |
|    Assigned memory (HEAP)......... 2000035456                                                    |
|    Short area..................... " "                                                           |
|    Paging area.................... 73728                                                         |
|    Maximum address space.......... 4294967295                                                    |
|                                                                                |
|    If the error occures in a non-modified SAP program, you may be able to                        |
|    find an interim solution in an SAP Note.                                                      |
|    If you have access to SAP Notes, carry out a search with the following                        |
|    keywords:                                                                                |
|                                                                                |
|    "TSV_TNEW_PAGE_ALLOC_FAILED" " "                                                              |
|    "SAPLCRM_UPLOAD_BTMBDOC" or "LCRM_UPLOAD_BTMBDOCF36"                                          |
|    "FILL_BILLPLAN"                                                                               |
|                                                                                |
|    If you cannot solve the problem yourself and want to send an error                            |
|    notification to SAP, include the following information:                                       |
|                                                                                |
|    1. The description of the current problem (short dump)                                        |
|                                                                                |
|       To save the description, choose "System->List->Save->Local File                            |
|    (Unconverted)".                                                                               |
|                                                                                |
|    2. Corresponding system log                                                                   |
|                                                                                |
|       Display the system log by calling transaction SM21.                                        |
|       Restrict the time interval to 10 minutes before and five minutes                           |
|    after the short dump. Then choose "System->List->Save->Local File                             |
|    (Unconverted)".                                                                               |
|                                                                                |
|    3. If the problem occurs in a problem of your own or a modified SAP                           |
|    program: The source code of the program                                                       |
|       In the editor, choose "Utilities->More                                                     |
|    Utilities->Upload/Download->Download".                                                        |
|                                                                                |
|    4. Details about the conditions under which the error occurred or which                       |
|    actions and input led to the error.                                                           |
|                                                                                |

Runtime Errors         TSV_TNEW_PAGE_ALLOC_FAILED
Short text
No more storage space available for extending an internal table
|What happened?
|    You attempted to extend an internal table, but the required space was
|    not available.
|Error analysis                                                                                |
|    The internal table "\FUNCTION=CRM_UPLOAD_BTMBDOC_FILL\DATA=ET_BILLPLAN_D" could
|     not be further extended. To enable
|    error handling, the table had to be delete before this log was written.                       |
|    As a result, the table is displayed further down or, if you branch to                         |
|    the ABAP Debugger, with 0 rows.                                                               |
|                                                                                |
|    At the time of the termination, the following data was determined for                         |
|    the relevant internal table:                                                                  |
|                                                                                |
|    Memory location: "Session memory"                                                             |
|    Row width: 1908                                                                               |
|    Number of rows: 35912                                                                         |
|    Allocated rows: 35912                                                                         |
|    Newly requested rows: 8 (in 1 blocks)                                                         |
|    Last error logged in SAP kernel                                                               |
|                                                                                |
|    Component............ "EM"                                                                    |
|    Place................ "SAP-Server XXXX"                   |
|    Version.............. 37                                                                      |
|    Error code........... 7                                                                       |
|    Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "                  |
|    Description.......... " "                                                                     |
|    System call.......... " "                                                                     |
|    Module............... "emxx.c"                                                                |
|    Line................. 1897                                                                    |
|                                                                                |
|    The error reported by the operating system is:                                                |
|    Error number..... " "                                                                         |
|    Error text....... " "                                                                         |
|                                                                                |
|                                                                                |
|                                                                                |
|                                                                                |
|How to correct the error                                                                          |
|    The amount of storage space (in bytes) filled at termination time was:                        |
|                                                                                |
|    Roll area...................... 6221152                                                       |
|    Extended memory (EM)........... 1826778184                                                    |
|    Assigned memory (HEAP)......... 2000035456                                                    |
|    Short area..................... " "                                                           |
|    Paging area.................... 73728                                                         |
|    Maximum address space.......... 4294967295                                                    |
|                                                                                |
|    If the error occures in a non-modified SAP program, you may be able to                        |
|    find an interim solution in an SAP Note.                                                      |
|    If you have access to SAP Notes, carry out a search with the following                        |
|    keywords:                                                                                |
|                                                                                |
|    "TSV_TNEW_PAGE_ALLOC_FAILED" " "                                                              |
|    "SAPLCRM_UPLOAD_BTMBDOC" or "LCRM_UPLOAD_BTMBDOCF36"                                          |
|    "FILL_BILLPLAN"                                                                               |
|                                                                                |
|    If you cannot solve the problem yourself and want to send an error                            |
|    notification to SAP, include the following information:                                       |
|                                                                                |
|    1. The description of the current problem (short dump)                                        |
|                                                                                |
|       To save the description, choose "System->List->Save->Local File                            |
|    (Unconverted)".                                                                               |
|                                                                                |
|    2. Corresponding system log                                                                   |
|                                                                                |
|       Display the system log by calling transaction SM21.                                        |
|       Restrict the time interval to 10 minutes before and five minutes                           |
|    after the short dump. Then choose "System->List->Save->Local File                             |
|    (Unconverted)".                                                                               |
|                                                                                |
|    3. If the problem occurs in a problem of your own or a modified SAP                           |
|    program: The source code of the program                                                       |
|       In the editor, choose "Utilities->More                                                     |
|    Utilities->Upload/Download->Download".                                                        |
|                                                                                |
|    4. Details about the conditions under which the error occurred or which                       |
|    actions and input led to the error.                                                           |
|                                                                                |

Short dump TSV_TNEW_PAGE_ALLOC_FAILED when import SAPKB70016

Hi all,
I´m trying to import the support package SAPKB70016 im my QAS system and I got an error. The import stop on phase XPRA_EXECUTION and I saw at the tcode sm37 that there is a job running with the name RDDEXECL. This job is canceled with the dump TSV_TNEW_PAGE_ALLOC_FAILED. I already changed some parameters and also I applied some notes but I can´t solve this issue.
Parameter changed                Before                 After
ztta/roll_area                        30000000          100000000
ztta/roll_extension               4000317440        8000000000
abap/heap_area_dia        2000683008        4000683008
abap/heap_area_nondia      2000683008        4000683008
abap/heap_area_total       2000683008        4000683008
em/initial_size_MB                             392                    1024
abap/shared_objects_size_MB      20                     150
es/implementation                           map                     std
JOB LOG:
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server FQAS were synchronized
ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED
Job cancelled
ST22 LOG:
Memory location: "Session memory"
Row width: 510
Number of rows: 0
Allocated rows: 21
Newly requested rows: 288 (in 9 blocks)
Last error logged in SAP kernel
Component............ "EM"
Place................ "SAP-Server FQAS_QAS_01 o
Version.............. 37
Error code........... 7
Error text........... "Warning: EM-Memory exhau
Description.......... " "
System call.......... " "
Module............... "emxx.c"
Line................. 1897
The error reported by the operating system is:
Error number..... " "
Error text....... " "
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 99661936
Extended memory (EM)........... 8287273056
Assigned memory (HEAP)......... 1376776176
Short area..................... " "
Paging area.................... 49152
Maximum address space.......... 18446743890583112895
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"CL_ENH_UTILITIES_XSTRING======CP" or "CL_ENH_UTILITIES_XSTRING======CM008"
"GET_DATA"
Now, I don´t know what I can do to solve this problem.
Can you help me?
Thanks

Hi all,
Gagan, I already changed my parameters according to the above post. I increased this parameters until maximum allowed but the dump still persists.
Bhuban
In this server I have 16GB RAM and 600GB HD.
             total       used       free     shared    buffers     cached
Mem:      16414340    4973040   11441300          0     454436    3572592
-/+ buffers/cache:     946012   15468328
Swap:     20479968          0   20479968
Size Used     Avail Use% Mounted on
441G 201G   218G 48% /oracle
20G     6.5G    12G   36% /sapmnt
25G     21G    2.7G   89% /usr/sap/trans
25G    8.8G   15G    39% /usr
20G    14G    5.1G    73% /
Anil, I already stop my appl and my db, I rebooted my OS too and after i tried again, no success.
What else can i do?
Thanks for all.

TSV_TNEW_PAGE_ALLOC_FAILED Shortdump , memory issue

Hello,
We are facing one issue of Memory dump for one of the Background Job. The Job is fetching a very huge data and it is failing with the shortdump TSV_TNEW_PAGE_ALLOC_FAILED. I have asked application user to brake the variant of period and now he is running job for 1 single day. But since the amount of data volume is so huge, it is not going thru.
~
The short dump gives following information about memory parameter value:
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 6225552
Extended memory (EM)........... 1001392792
Assigned memory (HEAP)......... 2998638656
Short area..................... " "
Paging area.................... 24576
Maximum address space.......... 18446744048641535328
~
The termination occurred in line 1009 of the source code of the (Include)
1009 -> SELECT * FROM .............
~
Instance Profile Memory parameter values :
rdisp/ROLL_SHM 8000
rdisp/ROLL_MAXFS 16384
ztta/roll_area 6500000
ztta/roll_first 1
ztta/roll_extension 1000000000
abap/heaplimit 20000000
abap/heap_area_nondia 3000000000
abap/heap_area_dia 3000000000
abap/heap_area_total 6000000000
~
Please note that once we got the dump "SYSTEM_IMODE_TOO_LARGE" and we have set the abap/max_imode = four_gb.
~
Can any one help me to resolve this error ? how much memory I can assign ? How to calculate memory available and how to calculate memory required ?
The job is very important from business point of view and do not have time to optimize the code as of now.
Any help will be higly appreciated.
Thanks
Best Regards,
Basis CK

Hi Markus,
I have gone tru the SAP note you have recommanded. Actually our requirement is that this job is very urgent from business point of view and code optimization will take time as we need to first test in sandbox and then the production. Looking at the scenario, I have decided with this approach :
Step 1 -> Remove parameter abap/max_imode = four_gb from instance profile as this parameter is not required.
Please refer note SAP note 548845 - Internal modes users more than 2 GB. According to this note "As of SAP_BASIS 6.20 Support Package 38 and SAP_BASIS 6.40, you do no longer require the profile parameter. Therefore, delete this parameter from the profile; otherwise there is an upper limit of 4 GB."
(Here I assume that by removing the parameter abap/max_imode, it can go beyound 4GB)
Step 2 -> Increase the memory dyanimcally thru RSMEMORY program for that application server and run the Background Job to make it finish successfully.
RSMEMORY Parameter is showing following value. Is it possible for you to recommand how much we can increase the memory ?*
Result of RSMEMORY
~~~~~~~~~~~~~~~~~
Quota Dialog
Step Memory class Size [bytes]
1 1
2 1 1000000000
3 6500000
4 2 3000000000
5
Memory classes: ROLL(0) EM(1) HEAP(2)
 1 6500000
 2 2 3000000000
 3 1 1000000000
 4
 5
Memory classes: ROLL(0) EM(1) HEAP(2)
abap/heap area dia: 3000000000
abap/heap area nondia: 3000000000
abap/heap area total: 6000000000
em/stat log timeout: 600
em/stat log size MB: 20
Any help will be highly appreciated.
Thanks
Best Regards,
Basis

TSV_TNEW_PAGE_ALLOC_FAILED with internal table declared with occurs 0

HI guys,
when the internal table is declared as occurs 0, the dump TSV_TNEW_PAGE_ALLOC_FAILED is encountered, when changing the declaration into standard table, th dump disappears. Why is this so?
Thanks!

There are three type of tables: Standard, sorted and hashed tables (see [here|http://help.sap.com/abapdocu_70/en/ABAPDATA_ITAB.htm]). When you define a table using the keyword OCCURS you're still defining a standard table.
Your exception indicates that you're running out of memory. The difference in the declarations that you mention shouldn't cause that. Main difference between the two declaration versions is probably that your table defined via OCCURS has a header line, whereas your other table doesn't (unless you declared it explicitly as WITH HEADER LINE).
I don't think though that with that little information anybody could explain the short dump. Actually it sounds rather odd that the change you mention should cause the dump (or make it go away). So I suspect you probably have to post further details. You might want to check the shortdump yourself and place a breakpoint at this place and run it for each version. Maybe you can see some difference...

TSV_TNEW_PAGE_ALLOC_FAILED error while executing FAGLL03

Dear Experts,
We are on AIX, Oracle 10g and ECC 6.0
One of our FI consultant is trying to execute a report using the standard T-Code: FAGLL03 for a range of 1 year, but when she executes this she gets the following dump (runtime error)
TSV_TNEW_PAGE_ALLOC_FAILED
So on working on this error i found that we need to set few abap parameters, for which i have done the following parameter settings..
rsdb/ntab/ftabsize 41000
Previous Value: 30000
rsdb/ntab/entrycount 25000
Previous Value:20000
abap/buffersize 900000
Previous Value: 400000
rsdb/cua/buffersize 9000
Previous Value: 5000
zcsa/presentation_buffer_area 8388608
Previous Value:8388608
zcsa/table_buffer_area 41943040
Previous Value:41943040
rtbb/buffer_length 25000
Previous Value:20000
rsdb/obj/buffersize 25000
Previous Value: 4096
abap/heap_area_dia: 3000000000
Previous Value: 2000000000
abap/heap_area_nondia: 0
Previous Value: 2000000000
abap/heap_area_total: 5000000000
Previous Value: 2000000000
After doing these chnages and there was a problem restarting the server, and then i made changes to the abap/buffersize parameter from 900000 to 600000 and then 500000 but the server never restarted.
So finally i have copied the instance profile which was earlier backed up back into the profile folder and the restarted the server which is working fine now.
Now my question is can any one plese help with the best settings so that i can resolve the FI issue and restart my server without any problems.
Reward points for sure.
Awaiting for your quick reply
Thanks in Advance
Regards
Harry

Hi,
I suggest you to follow below SAP Notes:
#146289   Parameter recommendations for 64-bits SAP Kernel
#425207   SAP memory management, current parameter ranges
#153641   Swap Space requirement for R.3 64-bits kernel
you should have at least 20GB swap space configured, at least 8GB RAM configured
On heap parameter:
      abap/heap_area_nondia: 0
      Previous Value: 2000000000
why you configure zero ? please maintain at 2GB
abap/buffersize is a very sensitve parameter. simply increasing it will end up in system emergency mode with PXA shared memory dump.
if you are running windows, then please activate ZAMM.
If you are running AIX, i suggest you to look into SAP Note 789477.
cheers,
Vincent

TSV_TNEW_PAGE_ALLOC_FAILED in Bw server,while execut t.code RSRT(netwear 7.3)

Dear experts,
when i execute T.code:RSRT, i get error like a no more more available in extend memory.In T.code: Db02 shows ()
1) An exception with the type CX_SY_STRUCT_COMP_NAMEoccurred, but was neither handled locally, nor declared in a RAISING clause
2) Wrong number of input parameters [GET_INPUT_STRUCT].
In t.code:st22
TSV_TNEW_PAGE_ALLOC_FAILED
TSV_TABH_POOL_NO_ROLL_MEMORY
Please help to slove
Regards,
Prabaharan B

Hi,
You need to increase the abap heap limits on the system.
Please check the following Notes which describe this issue :
     020527 Runtime error TSV_TNEW_PAGE_ALLOC_FAILED
     1260912 - Memory overflow note: Dump TSV_TNEW_PAGE_ALLOC_FAILED
     1387739 - Out of memory errors during shadow system operation
Thanks,
Bhavin Vyas

TSV_TNEW_PAGE_ALLOC_FAILED at SEM BCS

Hey SAP-Admins !
I have a Problem with this shortdump TSV_TNEW_PAGE_ALLOC_FAILED at TA: UCWB_INT
We're running Windows 64 Bit / SAP + DB with 24 GB RAM and 30 GB swap space.
I don't understand why we got this dump cause cause we have ZAMM aktiv and only the
memory parameter 
Phys_memsize = 8192
abap/use_paging = 0 
abap/heaplimit = 408944640 
abap/swap_reserve = 20971520 
em/blocksize_KB = 1024 
abap/shared_objects_size_MB = 600 
rdisp/max_wprun_time = 3600 
aktiv.
memorystate on the OS-System at the Dump
http://i53.tinypic.com/zlexjc.jpg
output memlimits
D:\usr\sap\B07\SYS\exe\nuc\NTAMD64>memlimits -v off
SAP R/3 address space configuration test tool V3.2 (98/01/14)
=========================================================================
Verbose mode off
Check the maximum data size per process (malloc)
Maximum process heap size = 4096MB
----
| Result |
----
Maximum heap size per process........: 4096 MB
measurement limited to 4096 MB
this value is probably limited by swap space
Total available swap space...........: 4096 MB
measurement limited to 4096 MB
main memory size x 3 recommended , minimum 1 GB
swap space probably even bigger, but cannot be
totally allocated by only one process
output sappfpar
D:\usr\sap\B07\SYS\exe\nuc\NTAMD64>sappfpar check pf=D:\usr\sap\B07
\SYS\profile\
B07_DVEBMGS00_SAPBON1S22
================================================================================
== Checking profile: D:\usr\sap\B07
\SYS\profile\B07_DVEBMGS00_SAPBON1S22
================================================================================
***WARNING: Unexpected parameter: login/password_max_new_valid =0
***WARNING: Unexpected parameter: login/password_max_reset_valid =0
Shared memory disposition overview
================================================================
Key: 1 Size: 2500 ( 0.0 MB) System administration
Key: 2 Size: 5503580 ( 5.2 MB) Disp. administration
tables
Key: 3 Size: 13714400 ( 13.1 MB) Disp. communication areas
Key: 4 Size: 519448 ( 0.5 MB) statistic area
Key: 5 Size: 4096 ( 0.0 MB) SCSA area
Key: 6 Size: 362086400 ( 345.3 MB) ABAP program buffer
Key: 7 Size: 14838 ( 0.0 MB) Update task administration Key: 8 Size: 134217828 ( 128.0 MB) Paging buffer
Key: 9 Size: 268435556 ( 256.0 MB) Roll buffer
Key: 11 Size: 500000 ( 0.5 MB) Factory calender buffer
Key: 12 Size: 6000000 ( 5.7 MB) TemSe Char-Code convert
Buf.
Key: 13 Size: 40500000 ( 38.6 MB) Alert Area
Key: 14 Size: 4400128 ( 4.2 MB) Presentation buffer
Key: 16 Size: 22400 ( 0.0 MB) Semaphore activity
monitoring
Key: 17 Size: 2747780 ( 2.6 MB) Roll administration
Key: 18 Size: 917604 ( 0.9 MB) Paging adminitration
Key: 19 Size: 100000000 ( 95.4 MB) Table-buffer
Key: 30 Size: 30720 ( 0.0 MB) Taskhandler runtime admin. Key: 31 Size: 4806000 ( 4.6 MB) Dispatcher request queue
Key: 33 Size: 51200000 ( 48.8 MB) Table buffer,
part.buffering
Key: 34 Size: 16777216 ( 16.0 MB) Enqueue table
Key: 41 Size: 25010000 ( 23.9 MB) DB statistics buffer
Key: 42 Size: 7056992 ( 6.7 MB) DB TTAB buffer
Key: 43 Size: 32504728 ( 31.0 MB) DB FTAB buffer
Key: 44 Size: 7914392 ( 7.5 MB) DB IREC buffer
Key: 45 Size: 4842392 ( 4.6 MB) DB short nametab buffer
Key: 46 Size: 20480 ( 0.0 MB) DB sync table
Key: 47 Size: 4097024 ( 3.9 MB) DB CUA buffer
Key: 48 Size: 300000 ( 0.3 MB) Number range buffer
Key: 49 Size: 2769392 ( 2.6 MB) Spool admin
(SpoolWP+DiaWP)
Key: 51 Size: 3200000 ( 3.1 MB) Extended memory admin.
Key: 52 Size: 40000 ( 0.0 MB) Message Server buffer
Key: 54 Size: 4202496 ( 4.0 MB) Export/Import buffer
Key: 55 Size: 8192 ( 0.0 MB) Spool local
printer+joblist
Key: 57 Size: 1048576 ( 1.0 MB) Profilparameter in shared
mem
Key: 58 Size: 4096 ( 0.0 MB) Enqueue ID for reset
Key: 62 Size: 85983232 ( 82.0 MB) Memory pipes
Key: 63 Size: 409600 ( 0.4 MB) ICMAN shared memory
Key: 64 Size: 4202496 ( 4.0 MB) Online Text Repository
Buf.
Key: 65 Size: 41951232 ( 40.0 MB) Export/Import Shared
Memory
Key: 1002 Size: 400000 ( 0.4 MB) Performance monitoring
V01.0
Nr of operating system shared memory segments: 41
Shared memory resource requirements estimated
================================================================
Total Nr of shared segments required.....: 41
Shared memory segment size required min..: 362086400 ( 345.3 MB)
Swap space requirements estimated
================================================
Shared memory....................: 1181.0 MB
Processes........................: 247.4 MB
Extended Memory .................: 4096.0 MB

Total, minimum requirement.......: 5524.4 MB
Process local heaps, worst case..: 8192.0 MB
Total, worst case requirement....: 13716.4 MB
Errors detected..................: 0
Warnings detected................: 2
D:\usr\sap\B07\SYS\exe\nuc\NTAMD64>
thank you a lot !
Darius

Hey Mercedes, 
thank you for your answer! 
but this system are running with ZAMM configuration
1. The basis for zero administration memory management on Windows is the dynamically self-extending extended memory. An "infinitely" large memory resource is made available with this method. The extended memory is initially set to the size of the profile parameter PHYS_MEMSIZE ([PM]). If more memory is required by the user, the extended memory extends itself in steps of "[PM] / 2" up to the set limit of the profile parameter em/max_size_MB (64 Bit 100000) or until the address space in the Windows page file is used up.
In this case this DUMP is very strange cause there are no limits beside the PHYS_MEMSIZE parameter 
Roll area...................... 2417280 
Extended memory (EM)........... 2000358240 
Assigned memory (HEAP)......... 2000047808 
Short area..................... " " 
Paging area.................... 942080 
Maximum address space.......... " " 
best regards
Darius

TSV_TNEW_PAGE_ALLOC_FAILED

Similar Messages

Maybe you are looking for