Turn Windows Features on or off Application Development Features

I am having an issue where the windows features under Internet Information Services/World Wide Web Services/Application Development Features will not install.  Specifically those which are clicked on when one clicks on ASP.NET.  All necessary versions
of ASP.NET are installed.  IIS 7 is installed.
In the Event Log there are two errors which are shown in conjunction with this problem.
1. Unable to install counter strings because the SYSTEM\CurrentControlSet\Services\ASP.NET_64\Performance key could not be opened or accessed. The first DWORD in the Data section contains the Win32 error code.
The error code is: 020000000E0E0000
2. Installing the performance counter strings for service ASP.NET_64 (ASP.NET_64) failed. The first DWORD in the Data section contains the error code.
The error code is: 02000000C9120000
I am thinking that the performace key is somehow not accessable due to some security feature.

Jerry and Andre,
I too was receiveing these errors in my event log regarding iis and ASP.NET:
1. Unable to install counter strings because the SYSTEM\CurrentControlSet\Services\ASP.NET_64\Performance
key could not be opened or accessed. The first DWORD in the Data section contains the Win32 error code.
The error code is: 020000000E0E0000
2. Installing
the performance counter strings for service ASP.NET_64 (ASP.NET_64) failed. The first DWORD in the Data section contains the error code.
The
error code is: 02000000C9120000
I
am thinking that the performace key is somehow not accessable due to some security feature.
I wanted to let others know that I have confirmed Jerry's solution works. Simply turn off and on IIS in Windows Features. :)  Thanks, Jerry!!!

Similar Messages

  • Solved : Turn Windows features on or off is blank or empty while opening

    Successfully solved : Turn windows features on or off blank fix 
    If you are going to enable or disable or installing any feature in windows 7, you have to do the setup through “Turn Windows features on or off” in
    Programs and Features.
    When you click on it, Windows Features dialog will appear asking you to “Please wait” and it will start searching for a list of windows features such
    as games, indexing service, internet information services (IIS) and etc that you can turn on or off. Windows Features is actually pretty much the same as Add/Remove Windows Component in Windows XP. You can also run Windows Features by typing optionalfeatures.exe
    at run or command prompt.
    ISSUE:
    In Windows 7 while going to enable “ Turn Windows features on or off “ in programs and features left side option the dialog it will be came out empty
    or blank.
    Normally you can able to see “please wait” initially after it tries to list out all the features, but if the machine having issue then it totally shows blank.
    For this issue Microsoft has created a knowledge base 931712 to acknowledge the problem and also provided 2 solutions to resolve this issue. but this solution is didn't work & it will not rectify this issue.
    SOLUTION:
    Download System Update Readiness Tool from Microsoft and install the machine. Please select OS compatible package(OS & supporting bit
    version) and download the file.
    Article page: http://support.microsoft.com/kb/947821?wa=wsignin1.0
    Download Link : http://www.microsoft.com/en-us/download/details.aspx?id=3132
    Tool Name: 
    System Update Readiness Tool for Windows 7 (KB947821) [November 2012] - Windows6.1-KB947821-v25-x86.msu
    (System Update Readiness Tool fixes Windows Update errors in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2, and
    Windows Server 2008)
    once successfully installed then you can go to >control panel >programs and features > and click the left side option “ Turn Windows features
    on or off” and check.
    If it’s not again listed please restart the machine then check.
    After it will work fine.
    This is what I faced and fixed this issue after long way through Google help.
    If this post was helpful to you please login this site and vote for me.
    Thanks & Regards,
    D. Jagadish

    Dear All,
    Thank you very much given good suggestion to me, I'm traded to follow above given steps but not yet resolve. Please help.
    Download and installed your given
    Windows6.1-KB947821-v33-x86
    patch file
    Still it’s showing white page while trying to click on
    Turn windows features on or off.
    Thanks & Regards
    Veerababu

  • Turn Windows Features on or off presents empty

    Hi,
    We are using Windows 7 32 bit enterprise edition and. Turn On and Off feature is empty. I have run System readiness tool and that did not fix the problem.
    Please help to solve the issue.
    Regards,
    Boopathi S

    Hi
    Please try the belwo
    Download System Update Readiness Tool from Microsoft and install the machine. Please select OS compatible package(OS & supporting bit
    version) and download the file.
    Article page: http://support.microsoft.com/kb/947821?wa=wsignin1.0
    Download Link : http://www.microsoft.com/en-us/download/details.aspx?id=3132
    Tool Name: 
    System Update Readiness Tool for Windows 7 (KB947821) [November 2012] - Windows6.1-KB947821-v25-x86.msu
    (System Update Readiness Tool fixes Windows Update errors in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2, and
    Windows Server 2008)
    once successfully installed then you can go to >control panel >programs and features > and click the left side option “ Turn Windows features
    on or off” and check.
    If it’s not again listed please restart the machine then check.

  • I can't turn windows program compatibility off

    I enabled "turn off application compatibility engine" and "turn off program compatibility assistant" in computer configuration (through group policy edit) and also "turn off program compatibility assistant" in user configuration,
    and still when I try to install visual studio it says: "Windows Program Compatibility mode is on. Turn it off and then try Setup again". where should I turn off windows program compatibility? once I enabled "remove program compatibility property
    page" and now I don't have this page even after I disabled this setting. now how can I have this page back? Is there a command that I can use it in cmd to change these settings?

    Hi,
    Here is the workaround:
    Rename the EXE accordingly:
    Visual Studio 2012 Ultimate -> vs_ultimate.exe
    Premium -> vs_premium.exe
    Pro -> vs_professional.exe
    Express for Web -> vns_full.exe
    Express for Windows -> win8express_full.exe
    Express for Desktop -> wdexpress_full.exe
    http://connect.microsoft.com/VisualStudio/feedback/details/792132/visual-studio-2012-pro-wont-install-on-fresh-windows-8-1
    Also, refer to this thread for more information:
    http://social.msdn.microsoft.com/Forums/en-US/103cef36-e6ef-4393-86a2-3bd03fa90f48/windows-81-and-vs2012-sdk-get-error-windows-program-compatibility-mode-is-on-turn-it-off-and-then?forum=vssetup
    Alex Zhao
    TechNet Community Support

  • Turn Telstra Online Security features on or off

    Step 1
    On the Telstra Online Security dashboard select the Computer Protection icon
    Step 2
    Click on the Computer Protection icon. This will expand the product dashboard to offer more options.
    Step 3
    Next to the computer protection heading will be the Settings button. Click on this to open the Settings dialog box. By default, the Antimalware Settings page will pop up. Here you can select your profile for antimalware protection. Setting this to Off will disable Telstra Online Security's antimalware protection. Likewise, setting it to Always on or Prompt will enable it:
    Step 4
    To change settings related to Telstra Online Security's firewall, select the Firewall Settings page from the left-hand menu. Here you can choose to either disable or enable Telstra Online Security's firewall features.
    Step 5
    Once you are finished adjusting your settings, select OK to close the settings screen.
    If you want to shut down the Telstra Online Security on your computer:
    Step 1
    Right click on the Telstra Online Security icon in the windows taskbar.
    Step 2
    Click Exit and you will be presented with a prompt asking if you are sure you want to exit. Click on yes. You will then be prompted to enter your Telstra email and password to confirm your request. After these have been entered Telstra Online Security will close.
    Please Note: Your computer will now be unprotected from any threats which you may encounter on the internet or on your computer. It is recommended you enable Telstra Online Security to help protect your computer and your Internet experience.

    Re: Turn Telstra Online Security features on or off
    I am connected to the Internet via cable and the modem provides Wi-Fi connection. I have given access to the Wi-F to my grandkids lap top & smart phone. They are using all my data. How do I block them? I don't wish to take them off just block them when the usage is high i.e can I turn the Wi-Fi on and off as and when I want to.

  • When I turned off the "contacts" feature in iCloud (on my iPhone 4) I lost all my stored phone numbers.  Is there any way to recover them?  Help!!

    I turned on the "contacts" feature in the iCloud menu in settings on my iPhone4.  I ended up with a lot useless email addresses from my yahoo contact list that was cluttering up my phone contacts (actual phone numbers.)  I thought I could undo this by turning off the contacts feature in iCloud.  Instead, it wiped ALL of my phone number information in contacts, and left me with just the list of my email addresses, which I don't need.  I am desperate to recover all those phone numbers!  Please help. 

    Kilted Tim
    It worked!  Thank you. 
    Now I just need to delete the email address that are cluttering up my phone contact list. 
    Again, thanks.

  • How can I turn off the Pinch feature while in IE Browser yet continue to use the writing feature

    I found that I can use a stylus pen while in a browser with my HP TouchSmart 300.  It works flawlessly to write however when I rest my hand on the screen (to write)  it recognizes my hand as one point and the stylus pen as the other and the pinch feature makes my screen big or small.  If I could turn off the pinch feature yet leave the writing feature on, all would be perfect.  Can anyone help, please

    It's not possible, it doesn't use pressure on the screen to sense your stylus or hand, it uses the sensor array around the screen.

  • How do I turn off applications operating in the background

    I used to be able to turn off applications operating in the background.  Since the last software update, I can't do it.

    Double tap the Home button, then swipe upwards on the App Preview (not the App Icon). Tap the home button again to return to normal screen.

  • How to turn OFF Smart Address feature in Mail in iOS?

    How to turn OFF Smart Address feature in Mail in iOS?

    You seem to have found the right setting. From my notes:
    Add the following line to $ORACLE_HOME/search/webapp/config/search.properties and then restart oc4j:
    ses.qapp.similar_doc_handling=disabled
    Maybe you didn't restart oc4j (using "searchctl restart")?

  • How to turn off application frame photoshop elements 12 on OSX?

    I just upgraded from PS elements 8 to 12 and can't find the "shut off application frame" option? Photoshop Elements 12 OSX

    I didn’t think that was an option in PSE12. Do you mean the ability to see through the application to the desktop? It used to be in older versions under the top menu:
    Window >> Application Frame
    Or are you referring to floating windows/cascading? You change the settings in:
    Adobe Photoshop Elements Editor >> Preferences >> General

  • What does this mean, " Web service is turned off. An administrator can turn it on using the Server application?"

    I'm attempting to connect to a website I've being using for 5 years plus. Now Firefox reports that the certificate is improper, and the message, " Web service is turned off. An administrator can turn it on using the Server application.", is given.
    I don't know what to do with this information. Web service is on for other websites. What is the "server application?" How can I take control and connect? I am the administrator.

    I cannot replicate on another browser. In fact, I now cannot replicate on my Firefox browser. I can only assume that the certificate problem was taken care of by the website involved. But in case this problem returns, I wonder what server application I am to use in order to turn my (?) web service on?
    Cryptic, unexplained error messages are a pet peeve of mine. It seems that Microsoft does not have a lock on such frustrating messages.

  • IOS 7 How do you turn off the security feature that requires me to type in my password everytime I use the phone?

    IOS 7 How do you turn off the security feature that requires me to enter my 4 digit password everytime I use my phone?

    Hi puravidamaine,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    If you know your passcode, here are the instructions to turn it off:
    iOS: Understanding passcodes
    http://support.apple.com/kb/HT4113
    If you don't remember your passcode, follow these instructions:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212?viewlocale=en_US
    Cheers,
    - Judy

  • Please help me to find out how to turn off the shuffle feature on my touch i-pod, Please help me to find out how to turn off the shuffle feature on my touch i-pod

    Please help me to find out how to turn off the shuffle feature on my I-pod nano ... THANK YOU!!!!!! :)

    Just figured it out :) Thanks though!!!

  • HT2729 How do I turn off the shuffle feature within a playlist on my iPhone? Tapping the shuffle button doesn't work

    How do I turn off the shuffle feature within a playlist on my iPhone? Tapping the shuffle button doesn't work

    The shuffle control shows up when you touch the screen in album view. This brings up the scrubber bar, repeat control and shuffle control. The shuffle control appears as crossed arrows. When it is blue it is On. When it is white it is Off.

  • How do you turn off the shuffle feature on ipod touc

    How do you turn off the shuffle feature when listening to a playlist.

    One the right side of the Now Playing screen right below the scrubber bare there is a crossed arrows icon. That is the shuffle icon. Tap the icon till it is white for shuffle off.

Maybe you are looking for