Turning off the iPad after wireless problems factory resets the iPad

Here is the scenario...
1.) The iPad will work perfectly for several days.
2.) Then it will no longer detect wifi networks at all. It simply says "No networks found". (This is not an issue with the wifi network itself)
3.) Power the iPad off and then back on normally.
4.) The iPad has now been factory reset and must be completely setup again.
Nothing atypical is on the iPad as far as applications going. And this scenario has happened multiple times.

If you haven't tried a restore of the OS, give that a try (without installing any third-party apps until you can confirm that the problem goes away) and see if it helps. If it doesn't, then it probably is a hardware problem and you will indeed need to contact Apple.
Regards.

Similar Messages

After I connect with my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.

After I connect my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.
switching off wifi and on again or going into airplane mode did't help!
This problem happens only with ad-hoc wifi networks not with normal ones.
(Ad-Hoc network was created on XP Computer)

Welcome to Apple Discussions
Sorry, but the 169.x.x.x IP address is internally generated by the iPod (and iPhone) and indicates that a network has been detected but no IP address has been issued. Your friends iPhone was not connected to your ad hoc network either - it connected to the internet through the 3G network.
You should read through the Vista help screens on ad hoc networking for some insight how this works. You should be able to get some ideas there.
In the mean time, $40 or less will buy you a very capable wireless router with four Ethernet ports and will simplify your network tremendously. Having used Windows ICS for a long time, the addition of a router and a real network simplified things so much.

When I try to open my Yahoo mail in safari, I get a message which states:" In order to use Yahoo mail, please turn Private Browsing off. Please go to Settings Safari Private Browsing, and turn off" The problem is my ipad does not a Private Browsing switch

When I try to open my Yahoo mail in safari, I get a message which states:" In order to use Yahoo mail, please turn Private Browsing off. Please go to Settings>Safari>Private Browsing, and turn off" The problem is, my ipad does not a Private Browsing switchat this location.

With iOS 7 on the iPad, you turn Private Browsing on and off by tapping the URL field. The screen that opens up has your bookmarks on it. In the bottom left corner is a hot button marked 'PRIVATE'. Tap on the word 'PRIVATE' to turn private browsing on or off. Yeah, there aren't any instructions anywhere that I can find to do this, and if you follow Yahoo's instructions, they don't work. This doesn't happen with the previous Apple OS, and you can restore your iPad to the older OS.

My bookmarks are lost after turning off the computer unexpectedly (power problem),how can it recovers?

My bookmarks are lost after turning off the computer unexpectedly (power problem),how can it recovers？ Thanks a lot !!!!
我的书签在电脑突然被断电之后全部丢失了，我该怎么办呢？？谢谢啦！！~~~~

This can also be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
* http://kb.mozillazine.org/Lost_bookmarks

This past month I have been having problems connecting to my home wireless connection. Previously I had no problems whatsoever. I have tried unplugging the wireless router, turning off the wirless airport, deleting the network name from my list of server

This past month I have been having problems connecting to my home wireless connection. I have a MacBook Pro OSX Version 10.6.8. Previously I had no problems whatsoever. I have tried unplugging the wireless router, turning off the wirless airport, deleting the network name from my list of servers and trying to reconnect this way. These methods have worked temporarily, but the same problem keeps coming back. Most of the time my personal wireless connection does not even come up among the list of available networks. My fellow flatmates have PCs and both of them are able to connect to the network without problem.
The router is a d-link model DIR-615. I am not tech savy, so if any other information need to be provided in order to better understand my situation, please let me know.
Please help me!

If I open the list of networks in a window it says "connection timeout," but if I just select it from the drop down it tries for awhile and then stops with no prompt. When I try to run network diagnostics it says "sorry, we can't connect to the internet" (or some solution-free variation of that)

How can I turn off the laptop after restoring it to factory settings?

Hello everyone
I am selling my Portege R830-10Q so I want to restore it to factory settings (out-of-box state) AND THEN TURN IT OFF.
I have successfully brought the laptop to factory settings by using the _TOSHIBA Recovery Wizard_ and choosing *Recovery of Factory Default Software (Recover to out-of-box state)*. However, at the end of the recovery process and after everything is re-installed I was not able to TURN OFF the laptop. I was only given the option of restarting it. After restating it, the Windows set-up process starts.
I don't want to set-up Windows, i.e. language, keyboard, user account, etc. I want to leave the Windows set-up for the person who buys the laptop from me. How can I switch off the laptop after the system recovery without having to set up Windows?
I'd really appreciate your help.
Regards
Pedro

When recovery procedure is finished and you are asked for restart just press power button and switch it off. I think it only thing you can do.
Anyway, why not to start Windows and go through setup option. New owner can change this basic settings anyway. As username put Admin and language and keyboard can be set as default.
For instance, if you have German recovery image set everything to German. New owner can change it anyway.

When you turn on the ipad2 it does not start up properly. The rotating disk that happens when you turn off the ipad appears after the apple logo comes up

When you turn on the ipad2 it does not start up properly. The rotating disk that happens when you turn off the ipad appears after the apple logo comes up during start-up and stays there for ten minutes. Then, the ipad will start up properly.

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Ipad is not restored.. it almost done loading and.it.say There was problem downloading the software for the ipad. the network connection was reset.. i turn off the firewall and antivirus

ipad is not restored.. it almost done loading and.it.say There was problem downloading the software for the ipad. the network connection was reset.. i turn off the firewall and antivirus.. It was almost donnIe like 5% away to be finish...

Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799

After installing ios7, my ipad buttons stopped working, I can't even turn off the ipad. Please help me. I don't know what to do.

After installing ios7, my ipad buttons stopped working, I can't even turn off the ipad. Please help me. I don't know what to do.

Try to reset the device:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the
Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot
normally.

IPAD Mini Freezing up in installation mode as it is installing Update iOS 8.1.3 . I cannot turn off the iPAD Mini . How do I resolve this problem?

iPAD Mini purchased for Xmas 2013 is freezing as it tries to complete the installation of the iOS update 8.1.3. The screen his frozen on the installation mode and I cannot turn off the iPAD Mini. How do I turn off the iPAD Mini and resolve this problem?

Try a reset, hold the power button and home button until you see the apple then let go. Also, it is iOS 8.2 that you are trying to install since that is the current version. I had no problems updating my mini today so hopefully yours will go well too.

Ipad mini, after ios7 upgrade if turn off the mobile data, my carrier gets turned off and wifi doesnt work at all. Its slow and app store crashes everytime. Help me to gowngrade to ios6. This really *****.

Ipad mini, after ios7 upgrade if turn off the mobile data, my carrier gets turned off and wifi doesnt work at all. Its slow and app store crashes everytime. Help me to gowngrade to ios6. This really *****.

Tap Settings > General > Reset > Reset All Settings
Then restart your iPad.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
Then press and hold the Sleep/Wake button until the Apple logo appears.
Downgrading is not an option for an iOS device.

My ipad is disabled and I cannot restore it because the Function Find My Ipad setting was on, and I cannot get in the ipad to turn off the setting in order to restore the ipad. Does anyone know how to solve the problem

My ipad is disabled and I cannot restore it because the Function Find My Ipad setting was on, and I cannot get in the ipad to turn off the setting in order to restore the ipad. Does anyone know how to solve the problem

Force iPad into Recovery Mode. Follow step 1 to 5 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times.

TS1398 My macbook is connected to the internet, but my iPad just stopped connecting. I have "forgotten" the network and restarted, and I have "turned off" the iPad. It still says it's not connected to the internet, but the wifi signal is strong.

My ipad was working, and then just said it wasn't connected to the internet. I have forgotten the network and rejoined, I have turned off the ipad (slid on the arrow), and still no luck. The macbook is working with no problem. Help.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I was playing Angry Birds and had to hit the pause button to listen to something. When I hit the pause/play button again to resume, I heard talking that sounded like a talk-radio program and I couldn't turn it off, even when I turned off my iPad.

Does anyone know what would cause me to start hearing a talk program of some type after hitting the play button after it had been on pause. Hitting the pause button shuts off the talking, but hitting the play button starts it up again. The strange thing is that the talking continues even after I turn off my iPad. The talk program was about silly or trendy news items, not regular news. It sounds like it could be a talk-radio program, but there were no call letters or information on where it was coming from or who was talking. The person doing all the talking is a male and sounds like he could be in his 20's. The only way I could turn it off was to hit the pause button and then turn off my iPad. I just got my iPad last week and had not had any problems with it until this happened. At the time this happened I was playing a version of Angry Birds that kept being interrupted by t-mobile commercials from time to time, which I had never experienced before. either.

Well, shut my mouth! There was a similar question over to the right about a 6th generation nano repeating over and over again -- I read the answer to that one, followed the instructions, and holy crap, it's back to normal.
Is there a name for this when you end up replying to your own aggravating question? That's what I did. Now I can go out and listen. It's only 91 degrees. Heaven. Thanks, Apple.

I have a WRT54GC, and our wireless connection to the x360 is lost anytime we turn off the PC.

I have a WRT54GC that is hooked properly to the cable modem (adelphia) according to all literature... but, our wireless connection to the x360 is lost anytime we turn off the PC, which shouldn't happen. The router is connected directly to the motor. modem. We can be on line on with the pc and x360 at the same time and we have the internet connection. But both connections will also free from time to time on us. The cable HSI was just installed and we are new to this. Any assistance would be great! I'm taking my laptop home this weekend to see if I can get on wireless with it. Also (sorry) all the lights are working as they should according to the router software, but when I put the cd in ran the wizard, it tells me it can't find the router connected to my pc. I'm going batty with this. Thanks.
MC

Hi ... Mac address cloning is enabled on my router - so I guess that could be a problem, and the filmware version is 1.02.5 - we just installed this thing and haven't done any type of upgrades.
A little history - adelphia didn't connect properly - turning off the pc killed the wireless router connection and then if I hooked right into the cable modem from the pc, I didn't get a connection. So, we unplugged everything and started out fresh following the install wizard and the pc now sees the router. After that, my laptop didn't lose it's connection when the pc was shut down either. So ... the xbox was next. It seems that when we have the WEP enabled, the xbox 360 can not connect to xbox live. We did a media test first it passes the connection to the wireless network and takes the WEP key, but it fails when looking for the IP address. All DHCD information is enabled. So, we disabled the WEP and ran the console test - and it passed. We then did the media test and it obtained the IP address this time, but then failed the media connect (whatever the next test is). Not sure we actually need the media text or just the xbox live test.
I'd like to be able to use the WEP security, but we can't go live when it is enabled.
We are new to this, so appreciate any assistance!

Turning off the iPad after wireless problems factory resets the iPad

Similar Messages

Maybe you are looking for