Turning PM notification into work order - standard value for business area

Hello,
when turning a PM notification into a work order in IW22, by pressing the create button, a windows comes up where
'Order type', 'Business Area' and 'Main Work Center' can be entered.
The field for business area is empty, but I would like to set a standard value, that comes up automatically when this window opens.
Where can I make settings for that?
Thanks
Anne

in IW22 go to - extras -settings- default values
note - these will apply to your user id only

Similar Messages

User status for Notification and Work order

We generate Service Notification IW26. I have already configured user status like PMND (Planning order not done), AWOP (Awaiting ordered parts) etc. in the Work order a while ago. Now the user wants same User status to the Notification as well. I like to know from experts what is the value added to have the same user status for both Notification and Work Order?
Do you have any suggestions?

Hey Chandra,
The customer intent behind this requirement must be to check in reporting / List Display Transaction about the Order Status. If they want to know looking at a Pending Notification List about the Order Status, you can always provide similar report using SAP Query Builder or with help of your Developer.
Apart from that If the Requirement is to have these User Statuses in Notification itself, Please advice them that it will be extra activity while performing transaction.
I dont see any other benefit of having User Statuses added to Notification as well.
Do let me know if you have some more info on Why Customer is requesting this....
Regards,
Avi

Reduce Remaining Order Planned value for services with PO

Hi guys,
I'am looking for a way to reduce the remaining or residual order plan value for a network activity with services where the amount on the PO is below the planned value. If for example the planned value amounts up to 1000 and the PO has been reduced due to negotiations to 900, a remainder order plan of 100 remains on the network activity till the activity is technically closed.
Is there a way to reduce the ROP when a PO exists for the network activity?
Thanks, Geert

We are combining an early visibility of all costs and a strict budget availability control with a formal procedure for project managers to request additional budget.
We have more and more projects where a part of the budget remains blocked in ROP for service activities because the planned value was more pessimistic than the real PO amount. Since these service activities are typically executed at the end of the project that part remains blocked. Of course the project managers want to use that marging elsewhere without having to pass a request for additional budget.
We have no issue with the network activity planned costs remaining visible, we just want the ROP to be 0 when a the purchase requisition for the service activity has been transformed into a purchase order. In the above example 100 of the budget would be freed for other use.

Tables used in f.08 for business area value

Hi ,
thanks Dzed & raju .
structure also given you but,
now i want from which table business area(GSBER) , debit & credit values are taken.
Regards,
Jyotsna

Hi Jyotsna ,
It's Fetching the business area from FAGLFREESEL-RBUSA. . (Field for Business area) .
Also you can fidn the smae in BSEG-GSBER as well.
Regards,
rajesh Kumar

Customizing catalog profiles in notification and work orders

Hi all,
I have been trying to figure out two problems:
1- I would like to add one more catalog code to notification; therefore, there will be object part, damage, cause and activity. I would like to make this like a picture posted below. Catalogs in tab is not feasible and easy to enter.
2- Is it possible to show all catalogs (object-damage-cause-activity) in work order tab? There are only two catalogs and I would like to add two more.
Regards,
Selçuk - Maintenance Planner

Hi Selcuk,
1. This is a standard screen area (015), which can not be modified.
So you need to go fro screen-Exit to have a screen area with Activity fields under this one. Obviously Coding will be done in PBO and PAI to input values of the Z-fields to the real activity fields of the table (VIQMMA).
Screen-Exit in Enhancement QQMA0001 will help.
2. Similarly, for Order issue too you need to take help of Enhancement (Screen-Exits) IWO10018.
Both jobs will be deep technical jobs.
I do not see alternative ways other than developments for these requirements.
Regards
Jogeswara Rao K

Production order Standard value field grey out

Hi,
When I am using CO02 tcode THE STANDARD VALUE fields in operation detail screen has to be greyed out. Users should not be allowed to change the standard value key parameter values which flow from routing when the production order is created.
Please suggest in any way it can be controlled.
Regards
madan

Hi,
Thanks for the reply. Which user exit will work for that case.
Please suggest.
Regards
madan

How to refer the work order status value from a different transaction in the step handler?

Hi All,
I have a requirement to check the status of the work order from a different transaction before doing some logic in the current transaction. The following transactions are done to replicate the issue
1)changing the status to ONSITE to edit the work order (transaction 1)
2)Adding some information which will do some logic (transaction 2)
3)Completing the work order (transaction 3)
The transaction 2 will have some logic and will be executed only if the status is COMP but even though the status is COMP now (transaction 3) my condition check in the logic is showing as ONSITE status(transaction.status=ONSITE) and it fails. How can i get the latest status of the work order in the device? Please advice

Hi Jason,
The CompleteWorkOrderFinish sub action does have Apply action (screenshot 1) and the transaction definition (screenshot 2)of CompleteWorkOrderFix transaction with the only property Status which has the following settings (screenshot 3)
Also I am trying to add a status property in EditMeterFitDetaisl transaction and update this value with the current status of the work order using object collections filtering with key value. Please let me know if that approach can be followed. Thanks

How is the object link populate into work order - IW31

Hello,
I am new in PM and am in the process of trying to picking up the concept.
Question:
When I create a maintenance order (IW31), how are all the relevant data being pull out and populate into the work order?
For example,
The maintenance plan includes functional area and equipment object, material objects, and task list object.
Next, you have the equipment master, which also includes the task list, and functional location.
Finally, you have the task list which includes the Maintenance BOM component.
Hence, when I create the PM order via IW31, how are all those object information pull out and import into the order? What is the sequence? I am confused on this.
Thanks
Daniel

Daniel,
When the work order is created from the maintenance plan it copies the maintenance item data into the order e.g. Floc, Equipment, Order Type, Main Work Centre, Priority, etc.
The operations for the order are determined from the task list assigned to the maintenance item dependent upon the rule governed by the maintenance plan type (performance, strategy,etc).
PeteA

How to avoid automatic data change in service notification from work order

Hi,
when I change work order address data the address data from the service notification connected to the order is changed too, how can I avoid this change? Is there anything on customizing to control whichs fields are updated automatically.
Thanks,
Juan.

Hi,
You can trying using Books of Business.
Create a book and add that particular user to that book and at the time of task creation, through a workflow you can assign it to the corresponding book.
This might resolve the access issue you are facing.
hope it helps,
Mayank

Multiple Notifications to Work Order

Hi Gurus,
We have a Maintenance Plan generated and Orders created for that. We could see that the Notifications created for the Work Order. But when we see in the Order, We couldnt see the Notification been updated in the Order. When the User releases the Order a new Notification is being created. Hence this would lead to multiple Notifications for that Order.
This has been happening for very few Orders and not for all the orders. Also we couldnt replicate the same in our quality.
Could you please share your views in this? Also please let me know if anybody has faced any issue similar to this.
Thanks in Advance,
Saakithyan

Check OSS [1474677|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1474677]
hope it helps.

Standard value for performance monitoring

Guys,
I am looking into performance monitoring in the RWB bacause I think our production server is too slow. I get an average processing time per message around 60 sec, +/- 30 sec depending on the volume going through. This is obviously an unexceptable value...
But I was wondering, are there standards set for these values to indicate when performance is too (s)low? Any reference docs available from SAP?
Thanks

There are various factors need to be considered. 60 seconds happening for almost all interfaces or only some specific. If only for some interfaces, then check the message volume size. SAP recommends message size up to 5 mb for optimum performance. Also security layers such as https/ssl and message level security such as encryption or digital signing/verify could cause some additional delay in processing too.
Fixing Hardware is easy... You go for the SAP recommended spec.
If you are using PI 7.1 or above use Message Packaging configuration. This will help considerable boost in performance.
Please check this link
http://help.sap.com/saphelp_nwpi71/helpdata/en/46/7a6e3469454b2be10000000a155369/content.htm

Turning code snippets into a new JS library for using EA

Hi,
Considering turning a bunch of EA code snippets into a JS library.
So here are the main questions about doing so...
1. Is the root object class of EA the "sym" object and what is it actually in JS or JQuery? Is sym simply a variable containing the value: $( document )?
2. How to extend a class, such as sym? Can I simply add a method to sym by writing this? sym.newMethod=function(){do things}
3. Is composition.ready() actually the JQuery $( document ).ready() ?
And finally, is it alright to simply put all the methods extending the "sym" class into a .js file?
Thanks in advance!

Ah...and then a member of the or friend of the outsourced programming team in India that hasn't written a PlayTo method yet...has marked the not-so-helpful answers "helpful"....CERTAINLY hope that Adobe is not going to allow the outsourced programmers to ruin Adobe like Microsoft has already been ruined by outsourced programmers in India. Seems that some "friends" of those programming teams in India have already started trying to infiltrate and corrupt Adobe corporate.
Sitting at a library at Stanford right now in the Silicon Valley area and will likely print a PDF of this thread to present to some C-level execs at Adobe so the company can be saved before india ruins Adobe.

Email notification not working from Server Monitor (for power outages etc.)

I have my email address entered in the notifications fields for power on Server Monitor. I tried pulling the plug (it's on a UPS), which it did notice but it never sent any emails. How do I debug this? Where is the SMTP settings or whatever is needed? Have people gotten the email notifications from Server Monitor to work?
Mike

tobias Eichner wrote:
Have you checked your mail filter, maybe the notification got mistakenly marked as spam ?
thank you for your reply! Is this working for you - are you getting notifications? My spam folder doesn't have any of these. Where did you set up the SMTP info for this? I don't see this anywhere. On the web, at
http://support.apple.com/kb/TA21298?viewlocale=en_US
it looks like you have to tell it how to send the emails in Message.framework:
The Message.framework looks in two places for a way to send email. The first
is that it looks for an SMTP server configured in the Email tab of Internet
preferences. The other way is to use an email account configured in Mail.
the question is, which user's .plist file for internet preferences or for Mail - which user's info is it using to send the notifications?
Mike

Painter doesn't work with Trading Partner's Business Area COSP-PARGB

Hello,
i valorized field PARGB through FI substitution (Tcode GGB1) and it works fine.
PARGB is valorized in BSEG, COEP and COSP for CO totals records for reporting.
In GR22 i activated PARGB in Characteristics screen for Library 6O1 (internal orders).
I created a report copying standard report 6O01-001 and i put in General Data Selection field PARGB.
The selection screen doesn't work!
The field appears and F1 functionality calls COSP-PARGB and it's correct.
I tried to use fix values rather than variables (standard or custom), but the extraction doesn't work.
The system doesn't filter by Trading partner's Business Area.
Please, does anybody know something in matter?
Thanks,
Regards
Enrico

Hi Sanjit,
I tried to find what you said, but no success.
I made it work in other site, but in my own it doesn't work :S
I'm adding to receive mails in [email protected]
and here goes the site www.meanwhileeverywhere.com
I'll be glad if you help find this missing thing.
Thx!
Johnny Macedo
2014-03-13 14:34 GMT-03:00 Sanjit_Das <[email protected]>:
Re: Muse contact form doesn't work properly with external email
provider created by Sanjit_Das<http://forums.adobe.com/people/Sanjit_Das>in *Help
with using Adobe Muse CC* - View the full discussion<http://forums.adobe.com/message/6206807#6206807

EPrint does not work with Google Apps for Business (hosted email)

I have looked up numerous posts, from back into 2011 even, and HP still has not resolved this.
HP's ePrint does not work with companies using Google Apps for Business (hosted email).
Our emails come from our domain, but from the servers/DNS of Google, so we wind up getting
the "550 5.7.1 Command Rehected" error.
This is a major issue as more and more companies (especially small business owners) are moving away
from having in-house/Exchange servers, and they are moving toward hosted systems.
You really need to find a way to stop rejecting emails coming from Google Apps hosted email.
It's been around 4 years now (looking at previous posts). Why hasn't HP found a resolution to this yet?

I have brought your issue to the attention of an appropriate team within HP.
They will likely request information from you in order to look up your case details or product serial number.
Please look for a private message from an identified HP contact.
Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Turning PM notification into work order - standard value for business area

Similar Messages

Maybe you are looking for