Turning the wireless on/off on a HH3. Connecting o...

I have been having problems with the broadband dropping out. BT technical say its acceptable that it drops out a couple of times a day, so i decided to try and connect up an ethernet to get better connection speeds. I'd also like to turn the wireless connection off for safety reasons (perhaps a bit paranoid?)
I've now got CAT6 cable to two other PCs in my home. These are connected to the patch plate by the router ready for connection with patch leads.
I'd be grateful for some help as how to a) turn of the wireless and b) talk me through how to activate the ethernet to my other PC's.
One last question, if i turn off the wireless, can i turn it on at will so as visitors can log on to their laptops?
Many thanks.
Nick6070 
Solved!
Go to Solution.

unless you use fon when you cant
enter
192.168.1.254 in browser click A to Z top right  (hub pass word )
then
wireless connection enable disable
and do it there
POST RESULTS
Also post results of test at http://speedtester.bt.com/
If any post helps tick the star box on the left
Just cause Im paranoid dont mean they are not out to get me

Similar Messages

  • Is there a way to turn the wireless capabilities off on an AirPort Express?  I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections

    Is there a way to turn the wireless capabilities off on an AirPort Express?  I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.

    Is there a way to turn the wireless capabilities off on an AirPort Express?  I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
    It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
    If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
    For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
    In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
    Please check out the following AirPort User Tip for details on optimal base station placement.

  • I am using BT Broadband home hub and want to use my time machine - Can I turn the wireless router off in TM?

    Hi,
    I have BT home hub which is now my main router in the house.  I also have Apple TV which works off the router and a network adapter around the house which is perfect for all my needs.  However, I also have a time machine but haven't used it for a while now as it's internal router overrides my current network which causes problems.
    Being that i'm not very 'technical' I was hoping someone could give me a  'guide for dummies' instruction on how to turn off the wireless signal inside my time capsule without messing up the BT router?
    Many thanks in advance
    Alex

    Thanks guys,
    Sorry, just to clarify, I need to connect the ethernet cable to my home hub and my TC first before i can do this?
    And once i've done this will my stuff be backed up via the cable or wireless?
    I know these are probably very stupid questions but like I said, i'm a div when it comes to this stuff!
    Alex

  • Since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says "Wi-Fi: Looking for networks- and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution?

    since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.

    since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.

  • HT3477 How do I turn the guest network off?

    How do I turn the guest network off?

    If your Mac is running Lion or Mountain Lion......
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit
    Click the Wireless tab at the top of screen
    Remove the check mark next to Enable Guest Network
    Click Update to save the new settings and the Time Capsule will restart in 30 seconds
    If your Mac is running Leopard or Snow Leopard.....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the Time Capsule, then click Manual Setup
    Click the Guest Network tab
    Remove the check mark next to Enable Guest Network
    Click Update to save the settings and the Time Capsule will restart in 30 seconds

  • I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

    I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

    Wifi:  my Cell phone will remember 10 wifi connections.  So delete any you don't use often and your home wifi and try to enter home wifi again.
    if it still won't connect to home wifi, call your internet provider for help.  You may need a newer router or different settings Or upgraded service.   Your phone seeks the best connection and will refuse lesser connections.
    last resort.  Backup the phone.  Do a full reset, then restore as new with the backup.
    if still not fixed, go back to apple and insist on repair or replacement.
    HOWEVER.   voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

  • Is unplugging TV-out adapter the only way to turn the second display off

    When the video out adaper is plugged in the iMacs resolution resets to what the TV-out can handle, I.e. 1024x768.
    I hate to have to plug/unplug the connecter to turn the TV-out off and thereby regain normal resolution on the iMac.
    Is that the only way? I was hoping that there is a way to disable the video-out and get the iMac back to normal through software rather than physically pull the plug out to turn it off nd then have to plug it back in when I want TV.
    Same goes for audio out. Any way to turn the external off while it's plugged in?
    TIA

    When the video out adaper is plugged in the iMacs
    resolution resets to what the TV-out can handle, I.e.
    1024x768.
    I hate to have to plug/unplug the connecter to turn
    the TV-out off and thereby regain normal resolution
    on the iMac.
    Is that the only way? I was hoping that there is a
    way to disable the video-out and get the iMac back to
    normal through software rather than physically pull
    the plug out to turn it off nd then have to plug it
    back in when I want TV.
    Same goes for audio out. Any way to turn the external
    off while it's plugged in?
    TIA
    Try using ScreenSpanningDoctor. It'll let you have different resolutions for the TV out and the iMac, stopping that insane behavior. Also check out the Griffin iMic for your audio out. Using VLC you can select the second screen for video playback and the iMic for audio. Hope this helps. (works great here)

  • Can i turn the Laptop screen off while connecting the TV?

    Dear All,
    I am connecting my Mac to TV 32'' via mini display port converted to HDMI.
    I am using it on MAC OS X 10.6.6, and on Windows 7 Ultimate SP1 also.
    when i am connecting my TV, the 2 screens are on, Laptop screen and TV screen.
    Can i turn the Laptop screen off while connecting the TV?
    how to do this on both operating systems?
    Thanks & Regards,
    Boudy,

    The quick answer is, hook up the tv to the computer, close the lid, then wake the computer up by clicking the mouse while the lid is closed. Not sure if it'll work while running windows, but I'd bet it does if you have the mac drivers installed on the win os.

  • HT4993 How do you turn the weird sound off when sending a text using the iPhone 4S

    How do you turn the weird sound off when sending a text using the iPhone 4S?

    Go to Settings-Sounds-Text Tone and change to None.  You're referring to the sound when posting a message to someone else, correct?  The only issue is if you set to none, you will not hear the incoming either.

  • How do I turn the flash notificaiton off on my 4S when receiving texts

    How do I turn the flash notificaiton off on my 4S when receiving texts

    Settings>General>Accessibility>LED Flash for Alerts>Off

  • How do I turn the touch screen off?

    Is there a way to turn the touch screen off to avoid mistakenly calling someone when the phone is in a pocket or purse?
    thx
    r

    You can put your iPhone into screen-lock mode (also called sleep mode). It is not off when in this mode: It can still receive calls and other data, but it will not respond to touches on the display, it will not display anything on the screen (except briefly when new data comes in, such as a phone call), and will use much less battery power.
    You can place your iPhone into sleep mode by briefly pressing the power button on the top.
    You can wake your iPhone from sleep mode by briefly pressing either the power button on the top of the home button just below the screen.
    You can set your iPhone to automatically enter sleep mode after a short period of time within the Settings app.

  • How do i turn the speaker phone off

    How do i turn the speaker phone off on a iphone 4

    When on a call, look at the screen.
    Select the speaker icon to turn the speakerphone off.
    This is covered in the iPhone user guide.

  • HT4060 I can't find a definite answer anywhere regarding whether or not you need to turn the iPad mini off before charging. So my question is should I turn the iPad mini off or leave it on before charging? Thanks in advance.

    I can't find a definite answer anywhere regarding whether or not you need to turn the iPad mini off before charging. So my question is should I turn the iPad mini off or leave it on before charging? Thanks in advance.

    I rarely if ever turn my iPad off. I charge it when the battery is low or at night while I'm sleeping. Even then I close the Smart Cover and let it sleep but I do not turn it off. It doesn't matter when you charge the iPad.
    The most efficient way to charge the iPad is to use the charger that came with it and plug that into a known good wall outlet.

  • TS1398 my iphone 4s has stopped access to wi-fi and I cant turn the wifi from off to on. how can i reset this? i already tried the reset setting

    my iphone 4s has stopped access to wi-fi and I cant turn the wifi from off to on. how can i reset this? i already tried the reset setting

    iOS: Wi-Fi settings grayed out or dim

  • I turned the sync option off on itunes, and problems happened....

    Hi!
    Today, when I was adding some music to my iPod, I decided to turn the sync option off on my iPod, but all my music on the iPod was erased.
    Now, when I try to click/drag songs onto my iPod in iTunes, the "music" section of my iPod won't highlight, and when I try to restore my settings, I get this message:
    The iPod "Corbin's iPod" cannot be synced. The disc could not be read from or written to.
    Help me?
    80GB iPod Video   Windows XP  

    I got the same thing!!!

Maybe you are looking for

  • Forms 4.5 or Forms 5.0 on Windows 2000

    My client has Forms 4.5 applications running on windows NT. They also have a Forms 5.0 license. They would like to move from Windows NT to Windows 2000 OS. I want to know whether the applications created using Forms 4.5 and Forms 5.0 can be deployed

  • Email Notification with date field

    Hi, i marked the a field as Display field this way it is displayed in the Email notification. (%Records%). But i can see the letral date field displayed in email as 2010:03:09:00:00:00:000 Why is the ''00:00:00:000'' displayed when i have a date fiel

  • Column masking row level security in Peoplesoft Databases

    Hi How about the credibility of using VPD( for column masking,row level security) in People soft Databases?where the sensitive data is redundant across 100's of tables. My intention is to use the VPD across all the tables that contain the sensitive d

  • How can I clear the common line information

    My program need to clear up the inforamtion in dos promp,which java method can clear up screen

  • In-Store Merchandise and Inventory Management (MIM) (mobile)

    Hello. I would be very greatful if anyone could share any knowledge (manuals/documents) about SAP MIM, especially the mobile part of it (Java Mobile Device Connectivity Server). I am either seraching in teh worng places, wrong keywords or there just