TV On The Web?

Is there a site on the net where you can get sports and other tv shows or packages rather than the garbage you find on your typical cable or satellite? Something that is compatible with Apple computers? I don't think what I'm looking for is in iTunes either.

Bowl Championship Bash is one of the many things on the iTunes Store. Start searching from this link, and you'll see what other users have bought too:
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewTVSeason?i=270620961&id=27 0081595&s=143441

Similar Messages

Cannot send email from Verizon to a specific domain using the web UI

I'm trying to send an email to a specific address on a domain I own from a Verizon account using the web UI. Whenever I click send, a popup appears saying "Your e-mail contains the following invalid e-mail addresses:" followed by the email address. I can send email to this address from a GMail account as well as my work email.
In Chrome, I can see that a "code":1002 error is being produced.
Does anyone know why this would happen? Does Verizon check destination domains for reputation? Is there any way to debug this further?

rhodeislandred wrote:
I'm trying to send an email to a specific address on a domain I own from a Verizon account using the web UI. Whenever I click send, a popup appears saying "Your e-mail contains the following invalid e-mail addresses:" followed by the email address. I can send email to this address from a GMail account as well as my work email.
In Chrome, I can see that a "code":1002 error is being produced.
Does anyone know why this would happen? Does Verizon check destination domains for reputation? Is there any way to debug this further?
What is the domain that is giving you the error?

How do I access the web utility with model cisco sf302-08p ?

Hi,i have a problem with the model Cisco SB SF302-08PP Switch , i connect a cable rj45 to my pc and configure the adapter local area connection (ip address:192.168.1.252), the LEDs blink green, and go to the address bar and get the IP by default, which according to the manual is 192.168.1.254 and the result is: page not found. Is there any way to change the web utility? How do I access the web utility?

restore the switch by holding more than 30 seconds and try accessing with ip 192.168.1.254. username and password is "cisco". before change your base ip to 192.168.1.2-253.try to ping and check the connectivity

How do I use the Web module to upload video to my website?

I'm using the Lightroom HTML gallery to upload my photos, fine and dandy, very happy with it. I also have some videos trimmed in Lightroom that I want incorporated into the gallery. This doesn't seem to be happening, instead I just get thumbnails. What/how do I incorporate my video clips into my web gallery? I moved over from jAlbum so I could have a simple one-tool workflow, so I'm really hoping that this is possible.

You can combine stills and video for output to h.264 (mp4 file) for example to upload to Youtube or Vimeo.
FTP upload will be subject to the limitations of your host. The web module within Lightroom creates all resources to link to the file index.html
The forthcoming LR6 is anticipated to have HTML5 galleries.

How do I use the web cam on my pc? Hp w2007 I have windows vista

How do I use the web cam on my pc? Hp w2007 I have windows vista

Hp w2007 is a HP monitor without webcam ...
Where is the webcam?
V.
*** Say 'Thanks' with Kudos ***

In the previous version i was able to close my mozilla and to open it again, the web pages which i was working with remained however i've tried many ways to have this advantage again but it is not working what can i do ???

in the previous Mozilla version i used to leave some web sites opened and when i start working again my Mozilla showed the web pages i was working with in that occasion, i have looked in the options menu but there is no way, perhaps it was an add-on and now it is removed??? i would like to have this advantage again in my Mozilla could it be possible?? thx!

Your webpages/tabs are still there. When you start firefox again, there is a "Restore Previous Session" icon below. If you click that, it will open up all your tabs again.
Or you could see this article for better understanding-
http://support.mozilla.com/en-US/kb/Firefox%20does%20not%20ask%20to%20save%20tabs%20and%20windows%20on%20exit?s=how+to+save+tabs&as=s#os=win&browser=fx4

How can I access my iCloud account on the web from my phone

how can I access my iCloud account on the web from my phone
iPhone 5 iOS 8.3
I have iCloud turned on, location services on, find my phone works but when I try to access iCloud via Safari on the phone it takes me to a page Apple.com,
iCloud then three options
set up iCloud on my phone (i have)
Install Find my phone, it is installed and it works from my MBP
or install find my friends, I don't need that I have no friends.
my calendars and contacts and bookmarks and all are all sync'd and working on the phone, but i thought if I typed in iCloud.com on the phone in Safari I would go to my iCloud web page that looks like this on my Mac.
Is that NOT how iCloud should/would look on my phone via Safari?
This is maybe a dumb question after 3+ year of iPhone'ing
thank you for clarifying or helping me to understand
jojoguitar_mmn_usa

I've been playing with a Galaxy here at work and here's what I've found so far - please feel free to jump in and suggest alternative methods to configure or access the various icloud components.
So the original Q: Can you access your icloud account on Android?
Not entirely: the website can't be used from an android browser (not properly - even with Dolphin HD and posing as different browsers it won't load correctly. So Find my iphone is out, so is the address book or looking at your e-mail or calendar just in a browser window
I was able to setup my e-mail using the IMAP settings published here:
http://support.apple.com/kb/HT4864
Be sure to setup the account manually - and note if you have trouble using SSL try TLS (that worked for me)
Address book is a no go so you'll have to use iTunes to sync all your contacts over to Gmail - if you still have an iPad it means managing contacts in two places though . Same goes for your calendar - transfer it to Gmail and forget about iCloud's calendar. Nice instructions here: http://howto.cnet.com/8301-11310_39-20064060-285/how-to-switch-from-iphone-to-an droid/
iWork is an Apple proprietary bit so don't expect much there.
So in my case, if I'm really going to make the switch to a Galaxy from my iPhone it really means I'm going to have to switch to using google as the backend. The timing to swap over to a galaxy/android phone is not the greatest - given that I'd have to give up my Apple addiction (syncing photos and itunes and losing access to my device tracking). Plus I still have an iPad and a mac and like living in the Apple ecosystem. I think I'll wait and see what the new iPhone looks like before I commit

Can you open a report in Excel/Word desktop instead of the web pugin?

using run_report_object( and web.show_document,
how or can you get a report to open in the desktop/full version of MS Excel/Word instead of the web plugin versions?
I can get the browser to open a report in pdf with my desktop adobe reader, but not with an rtf or xml/delimited desformat.
Currently I don't pass a mimetype when opening as a pdf, but I do pass one in the url when i am destypes of xml, delimited and rtf,
as this is the only way i have found out how to open the reports in word/excel.
I'm in the process of upgrading from forms 6 client/server to 10g developer suite, so this is my try with a web based system.
Does anyone have any suggestions, or where I should look.
Below I listed my code from a procedure.
the first part of the procedure is alot of converting, but if you skip down to the part between the 2 sets of double lines this fairly standard.
PACKAGE BODY pmc_lib IS
-- Procedure to run the report.
procedure run_reports(v_report_name in varchar2, -- Report Name with or w/o a path.
v_commode in number default synchronous, -- commode
v_execmode in number default runtime, -- execute mode
v_file_sys in number default filesystem, -- dummy
v_param_list in paramlist, -- parameter list
v_show_modes in varchar2 default null) is -- used for testing,
-- if set to anthing but null, the report properties will display
-- on the screen through an alert prior to printing.
v_errorcode number;
v_errortext varchar2(600);
v_initialized boolean := false;
v_prop_reportserver varchar2(200);
v_report_path varchar2(200);
v_user varchar2(100);
v_user_sessionid number;
v_forms_version varchar2(100);
v_default_report_server varchar2(200);
v_default_server_domain_path varchar2(200);
v_connect_string varchar2(3) := get_application_property(connect_string);
v_user_name varchar2(35) := get_application_property(username);
report_id report_object;
reportserverjob varchar2(100);
v_jobid varchar2(100);
rep_status varchar2(100);
v_url varchar2(500);
v_url2 varchar2(500);
v_parameter_value varchar2(100);
v_destype_param_value varchar2(100) := null;
v_desformat_param_value varchar2(100) := null;
v_desname_param_value varchar2(100) := null;
v_value_n number := 0;
v_param_type number := text_parameter;
v_prop_execmode number;
v_prop_commode number;
v_prop_destype number;
v_prop_filename varchar2(200);
v_prop_source_block varchar2(200) := null;
v_prop_query_name varchar2(200) := null;
v_prop_desname varchar2(200) := null;
v_prop_desformat varchar2(200) := null;
v_prop_reportserver varchar2(200) := null;
v_prop_other varchar2(200) := null;
v_mimetype varchar2(200) := null;
v_selected_mimetype varchar2(200) := null;
report_not_generated exception;
report_id_not_found exception;
BEGIN
v_forms_version := get_application_property(version);
v_prop_reportserver := get_report_object_property('report1', report_server);
v_report_path := null;
v_user := v_user_name || '/' ||
get_application_property(password) || '@' ||
v_connect_string;
if v_connect_string = 'NNN' then
v_default_server_domain_path := 'pmcoracapp01.aapmc.com/reports/rwservlet';
v_default_report_server := 'rep_pmcoracapp01_frhome1';
else
v_default_server_domain_path := 'oradevsrv.aapmc.com/reports/rwservlet';
v_default_report_server := 'rep_oradevsrv_frhome1';
end if;
v_initialized := true;
-- Check to see what version of forms is running.
if substr(v_forms_version, 1, 1) <> '6' then
-- Check to see if WEB version is running
-- This may be an unnecessary check.
if (get_application_property(user_interface) = 'WEB') then
report_id := find_report_object('report1');
-- id_null won't work on a report_id in Version 6, may put back in 10g once version 6 is gone completly
-- if id_null(report_id) then
-- raise report_id_not_found;
-- end if;
-- Because of Convertions from old system the following are needed.
-- 1) If 'execmode' is runtime, then change it to batch.
if v_execmode = runtime then
     v_prop_execmode := batch;
else
     v_prop_execmode := v_execmode;
end if;
-- 2) If Report name has an attached path, then remove it.
v_value_n := instr(lower(v_report_name), 'k:\pmc\new\');
if v_value_n = 0 then
     v_prop_filename := v_report_name;
else
     v_prop_filename := substr(v_report_name, v_value_n + 11);
end if;
-- From looking at the FORMS, 'destype' parameter is always passed in from the FORM.
-- It is either 'preview' or 'file'.
-- This is here for the converstion from Forms 6 to 10g.
-- If for some reason destype has not been passed in as a parameter, you will get a FORM error,
-- saying the parameter does not exists.
begin
-- 3) If 'destype' is one of the following, then change it to cache.
get_parameter_attr(v_param_list, 'destype', v_param_type, v_destype_param_value);
if lower(nvl(v_destype_param_value, 'null')) in ('preview', 'file', 'null') then
v_prop_destype := cache;
-- 3a) If 'destype' was = 'file' then check the 'desformat' and 'desname'.
if lower(nvl(v_destype_param_value, 'null')) = 'file' then
-- 3b) Get 'desformat' value
get_parameter_attr(v_param_list, 'desformat', v_param_type, v_desformat_param_value);
-- 'delimited' was not working, so change all 'delimited' to 'delimiteddata'.
if lower(nvl(v_desformat_param_value, 'null')) = 'delimited' then
     v_desformat_param_value := 'delimiteddata';
end if;
-- 3c) If 'desformat' is NOT one of the following, then change it to pdf.
if lower(nvl(v_desformat_param_value, 'null')) not in ('pdf', 'xml', 'rtf', 'delimiteddata') then
v_prop_desformat := 'pdf';
else
v_prop_desformat := lower(v_desformat_param_value);
end if;
-- 4) Get 'desname' property.
get_parameter_attr(v_param_list, 'desname', v_param_type, v_desname_param_value);
v_prop_desname := lower(v_desname_param_value);
end if;
else
v_prop_destype := lower(v_destype_param_value);
end if;
exception
when others then
null;
end;
-- If a desformat is rtf, xml, or delimited then get a mimetype to pass to the url
if lower(v_prop_desformat) = 'rtf' then
v_mimetype := '&mimetype=application/msword';
elsif lower(v_prop_desformat) = 'xml' then
v_mimetype := '&mimetype=application/vnd.ms-excel';
elsif lower(v_prop_desformat) = 'delimiteddata' then
v_mimetype := '&mimetype=application/vnd.ms-excel';
end if;
-- 6) If the Following are not set within the Report Object then
-- set them to the following defaults.
-- These are al required to be set for the Report Object to Function.
-- These are the defaults for AAPMC.
v_prop_execmode := nvl(v_prop_execmode, batch);
v_prop_commode := nvl(v_prop_commode, synchronous);
v_prop_destype := nvl(v_prop_destype, cache);
v_prop_desformat := nvl(v_prop_desformat, 'pdf');
v_prop_reportserver := nvl(v_prop_reportserver, v_default_report_server);
-- Set All Report_Object Properties
set_report_object_property(report_id, report_execution_mode, v_prop_execmode);
set_report_object_property(report_id, report_comm_mode, v_commode);
set_report_object_property(report_id, report_destype, v_prop_destype);
set_report_object_property(report_id, report_filename, v_prop_filename);
set_report_object_property(report_id, report_source_block, v_prop_source_block);
set_report_object_property(report_id, report_query_name, v_prop_query_name);
set_report_object_property(report_id, report_desname, v_prop_desname);
set_report_object_property(report_id, report_desformat, v_prop_desformat);
set_report_object_property(report_id, report_server, v_prop_reportserver);
set_report_object_property(report_id, report_other, v_prop_other);
-- Run Report_Object
reportserverjob := run_report_object(report_id, v_param_list);
v_jobid := substr(reportserverjob, length(v_prop_reportserver) + 2, length(reportserverjob));
-- If Report Status is not 'FINISHED', then loop till it is.
if reportserverjob is not null then
rep_status := report_object_status(reportserverjob);
while rep_status in ('RUNNING', 'OPENING_REPORT', 'ENQUEUED') loop
rep_status := report_object_status(reportserverjob);
end loop;
if rep_status <> 'FINISHED' then
raise report_not_generated;
end if;
-- Create 1st part of url.
v_url := 'http://' || v_default_server_domain_path || '/getjobid' || v_jobid || '?server=' || v_prop_reportserver;
-- Check for mimetype.
if v_mimetype is not null then
v_url := v_url || v_mimetype;
end if;
-- Final part of url.
v_url2 := 'javascript:window.open("' || v_url || '", "", "fullscreen=no, titlebar=no, location=no, toolbar=no, menubar=no, status=no, resizable=yes"); self.close()';
-- This is the built-in that calls a new browser window
web.show_document(v_url2,'_blank');
else
raise report_not_generated;
end if;
end if;
-- Destroy the parameter list.
destroy_parameter_list(v_param_list);
else
-- This section if for Client Server, Version 6 of forms.
-- It will do the same as before the conversion.
-- It is only used before the complete conversion.
if v_report_name is null then
return;
end if;
v_value_n := instr(v_report_name, 'k:\pmc\new\');
if v_value_n = 0 then
     v_prop_filename := 'k:\pmc\new\' || v_report_name;
else
v_prop_filename := v_report_name;
end if;
run_product(reports,
v_prop_filename,
v_commode,
v_execmode,
filesystem,
v_param_list,
null);
end if;
-- create history record of the report being run
insert into pmc_report_history values(
s_pmc_report_history.nextval,
v_prop_filename,
v_user_name,
sysdate,
v_forms_version,
v_jobid,
v_destype_param_value,
v_desformat_param_value,
v_desname_param_value,
v_prop_destype,
v_prop_desformat,
v_prop_desname,
v_mimetype,
v_window_open_params);
commit;
exception
when report_id_not_found then
show_user_alert('ERROR: Cannot Find Report Object!', null);
when report_not_generated then
show_user_alert('ERROR: Report Not Generated!', null);
when others then
v_errorcode := SQLCODE;
v_errortext := SQLERRM;
show_user_alert('ERROR : ' || v_errorcode || ' = ' || v_errortext, null);
end;
end;

What you could try is downloading the report to the client pc using WEBUTIL_FILETRANSFER.URL_TO_CLIENT, then open the locally save file using something like:
CLIENT_HOST('cmd /c rundll32.exe url.dll,FileProtocolHandler "localfilename"');

Error while adding a used relationship between the New DC and the Web DC

Hi Gurus
We are getting the Error in NWDS while Adding a used relationship between the New DC and the Web DC.
Steps what we are Done
1. Create the custom project from inactiveDC's
2.creating the project for the component crm/b2b in SHRAPP_1
3.After that we changed the application.xml and given the contect path.
4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
so, we skip this step and tried to create the build then it is saying that build is failed..
Please help us in this regard.
Awaiting for ur quick response...
Regards
Satish

Hi
Please Ignore my above message.
Thanks for ur Response.
After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the projects was also sucessfully done and EAR file was created.
We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
When i right click on my activity Id the deployment summery is also disabled.
So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
Any pointers in this regard would be of great help..
Awaiting for ur valuble Responses..
Regards
Satish

I have an Apple MacBook Pro and when surfing the web my computer will slow to a crawl and I will have a multi-colored spinning wheel visible until my latest request is handled. What is causing this and is there a way to prevent this from occuring

I have a MacBook Pro. When surfing the web it will eventually slow to a crawl. When this occurs, there will be a small multi-colored wheel spinning until my latest command is handled. What is causing this and is there a way that I can modify or prevent this from happening? Is there a setting that will prevent this?

When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

How to change the size of the web item text in WAD 7.0

Dear All
I am quite new to WAD and I am having a problem with changing the font size of a web text item
I have searched already and someone suggested changing the Design property to HEADER1 or HEADER2 etc and then I should be able to change the font / size.
I have done this but to no avail
I want to have large heading across the top of the web template
am I using the wrong web item ?
I know I can key the text directly into the web template and change the font from the menu bar but I need it in an item as I want to export them through to PDF later
Would be grateful of any help
thanks
Sandra

Thank you all for your quick responses (I will award points once this is sorted)
On the information you have supplied this has opened up yet another new part of WAD that I have not experienced ...TAGs
Shubhranshu - I have done what you said but as I have never used tags I have just had a look around and found that I can insert Any Tag but not sure if I should be doing that. If it is inert any tag , I chose FONT from the drop down and cbmAttributes defaulted into the custom tab for the class name but not sure what it wants in the Attributes and CSS Style tab, it won't accept what I am putting which is leading me to believe that I shouldn't be doing it that way.
Venkat - thanks for the links they will prove very useful. I've had a look and although they talk alot about the XHTML code for tags they don't actually say how you do it in the editor - I would like to produce one that way first and then see the code it generates for it. I'm a bit apprehensive with changing the code direct as I don't want to mess anything up.
Thanks again for your help

Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan Foley

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

Can not test the web service in JDeveloper.

Hi there...
I created an AppModule, added two custom methods, and generated a webservice for that. When I want to test the webservice I get the error "The Webservice Tester cannot be invoked because the WSDL document of the selected service cannot be read."
If I right the webservice and select run, I can view the web page to invoke the methods, However I am wondering why I can't test the service inside the developer.
The settings of my system are as follows:
OS: windows 7 64bit
JDeveloper: Studio Edition Version 11.1.1.3.0 , Build JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660
I did not install any update for JDeveloper...
So if anyone is having an idea what this problem is let me know.
thanks .

It seems that even if the test web service option does not work and i get the error, it is possible to run the web service, and then by clicking on the link in the log the tester in jdeveloper appears.
Don't know the reason for such strange behavior.

Manual refresh of queries in the Web

Hello,
in the web the default action following any change to the navigation state of the query-result is that an automatic refresh of the query is performed.
We want to enter a series of navigation-steps. It would be inefficient for the query
to automatically refresh each time a navigation-step was entered. Is it possible to halt the auto refresh from executing and instead switch to a manual refresh mode which means that the users can enter a series of navigation-steps and when they are ready, they simply press a refresh button?
Thanks in advance!
Regards,
Birgit.

Birgit,
options could be ..
1. Have the query automatically expand to a specific level for all queries...
2. Have a prequery window where the selection parameters are specified and then let the user enter the drilldown level for the query and then take the values from this template and then pass the same to the main query as URL parameters .. you can refer the Web API 3.x to find out how to do the same and also search for Command Line URLs.. this option would require some innovative javascript and command Line specifications..
Arun
Assign points if useful

Capture an image using the web camera from a web application

Hi All,
Could anyone please share the steps what have to be followed for capture an image using the web camera from a web application.
I have a similar requirement like this,
1) Detect the Webcam on the users machine from the web application.(To be more clear when the user clicks on 'Add Photo' tool from the web application)
2) When the user confirms to save, save the Image in users machine at some temporary location with some unique file name.
3) Upload the Image to the server from the temporary location.
Please share the details like, what can be used and how it can be used etc...
Thanks,
Suman

1) Detect the Webcam on the users machine from the web application.(To be more clear when the user clicks on 'Add Photo' tool from the web application)There's not really any good way to do this with JMF. You'd have to somehow create a JMF web-start application that will install the native JMF binaries, and then kick off the capture device scanning code from the application, and then scan through the list of devices found to get the MediaLocator of the web cam.
2) When the user confirms to save, save the Image in users machine at some temporary location with some unique file name.You'd probably be displaying a "preview" window and then you'd just want to capture the image. There are a handful of ways you could capture the image, but it really depends on your situation.
3) Upload the Image to the server from the temporary location.You can find out how to do this on google.
All things told, this application is probably more suited to be a FMJ (Freedom for Media in Java) application than a JMF application. JMF relies on native code to capture from the web cams, whereas FMJ does not.
Alternately, you might want to look into Adobe Flex for this particular application.

A tab popped up wich said Mozzilla Security, the web page seemed to scan my computer, stated it was infested with several viruses, and that I should download protection immediatly. Is this legit?

A new tab opened up on my tool bar labeled Mozilla Security. The website looks like your security warning. But the security button is gray, McAfee doesn't recognize the site, and the web address does not contain Mozilla.com. The web address of this pop up page is: http://update89.modyett.co.be/index.php?Q57hGtS5bW5G7Hr+M0lEZy4rE7T40TcfocDyRAcjpCPVLS/PhAEpv1Hgq9vgx1qxsLunLyiXHnwwL5T3qX/CE0Q/ZRXJp+2mKYsC+kRq
Do I have a virus, as it states, or is this uninvited web page trying to install a virus? What should I do?

Just because it said Mozilla Security in the title bar does not mean it is from Mozilla as Mozilla nor the Firefox browser has ever done such a thing.
This sounds like one of those fake animated scanners which claims it is scanning your computer and then says you are infected with such and such. It then suggests to download something that will be what really infects your computer if using Windows. As long as you did not download and install this whatever.exe then you should be safe. Though you may want to scan your computer with whatever antivirus software you have with updated definitions just to be safer.
This sort of thing is even more obvious on being fake when Linux and Mac users can encounter these pages.

TV On The Web?

Similar Messages

Maybe you are looking for