Twist won't recognize external microphone

This is a new problem. I do have an adapter and it has been working fine until a couple weeks ago. Even when I plut the external mic in now, the laptop continues to take its input through the built-in microphone. I really need to use the external capability. I've updated the audio driver. I have also updated the laptop to Windows 8.1. Can anyone help?

Hi,
I actually tried using the pickups on my acoustic electric guitar, which has a small pre-amp, equalizer, and volume control.
As I said, I could clearly see in the Mac OS setup section that the audio was getting through, it's just that garage band insists on using the built in microphone instead, even when I've configured line-in as my mic source.
So, does anybody else have any ideas?
Has anybody had this problem too?
Please let me know.
Cheers.

Similar Messages

  • IMac won't recognize external microphone through 4-pin splitter

    I recently purchased a Turtle Beach Ear Force X12 headset with separate audio output/input jacks, so I planned ahead and purchased a "splitter" adapter to get it to work with my Late 2012 27" iMac's 3.5mm combo jack. According to different accounts, it should have worked. But it doesn't.
    With the splitter, the audio output works fine, but the microphone isn't appearing in the Sounds system preference pane (I tried my iPhone's Earpods and its microphone is recognized). I've tried all the usual suspects, resetting both the computer and the PRAM, and tried all the tricks that got it to work with other people- muting the mic, plugging in the inputs before plugging the splitter into my iMac, I even tried the MIDI setup and stared at it like a five year old.
    Am I missing something? It seems to work for other people with the same headset and splitter. I'd like to exhaust all my options before forking over $40 for a Griffin iMic. Thanks.

    Is yours a Rev. A or B iMac??
    Not sure if this will work but try this, shut down and power down everything, detach all external peripherals you have (FW and USB, all the hubs, iPod etc etc) even the ethernet cable, pull out the main power cord too, let the iMac "rest" at least 15 mins, then attached back the main power cord.
    Now plug in your FW drive and then start up the mac to see if your ext. HD mounts
    Cheers

  • IMac 3.4 GHz Intel Core i7, running Lion 10.7.3, won't recognize external speaker jack, any suggestions?

    iMac 3.4 GHz Intel Core i7, running Lion 10.7.3, won't recognize external speaker jack, any suggestions?  Got a brand new iMac and purchased external speakers for same.  Hooked them into external speaker jack and the computer does not recognize the external speaker jack.  I then plugged them into the external head phone jack and the computer recognized the head phone jack.  How can I get the computer to recognize the speaker jack?

    Thanks "a brody," my mistake, I was mistaking the "audio in" jack for a speaker output jack.  I have some Klipsch ProMedia 2.1 speakers with a built in amplifier that I am using and they sound beautiful.  I do have them plugged into the correct jack, but was thinking there was a speaker out put and headphone out put.
    Thanks again for correcting me, I feel much better now that I know my brand new iMac isn't defective, lol.

  • Won't recognize external drives

    Just installed 10.7.3 and now my MacBook won't recognize my external hard drives (for Time Machine or other storage) nor will it recognize digital cameras except through Image Capture. Suggestions? Since posting this I found another post with the same topic, and have posted the info to that string.

    Try resetting the bus. Instructions here:
    http://docs.info.apple.com/article.html?artnum=88338

  • MacBook won't recognize headphone microphone

    I can't get my Macbook to recognize the microphone built into my Apple earbuds or my Urbanears Plattan headphones. What can I do to make it work?
    Help me Apple Support! You're my only hope!

    Welcome to Apple Discussions
    I can't remember if that setting is stored in PRAM but resetting it won't hurt and might fix it.
    Hold down command/option/p/r keys at start up and wait for three chimes before releasing the keys.

  • ? MacBook won't recognize external disc drive

    My MacBook's internal disc drive quit, so I'm trying an external Samsung SE-208 slim portable DVD writer.   It worked once, but now the mac won't recognize it.  I tried a DVD switcher app - no luck.  The Samsung plugs into the USB port, starts up OK then disappears from itunes, the desktop, Finder - It's gone. Can I completely disable the internal disc drive?  Would that help?  I appreciate ANY help.   I'm not skilled at these things so you need to spoon feed me.  thanks

    Thank you for your suggestion:
    Hardware Information:
              MacBook (13-inch Late 2006)
              MacBook - model: MacBook2,1
              1 1.83 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Video Information:
              GMA 950 - VRAM: spdisplays_integrated_vram
    System Software:
              Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:7:8
    Disk Information:
              TOSHIBA MK6034GSX disk0 : (55.89 GB)
                        (null) (disk0s1) <not mounted>: 200 MB
                        Macintosh HD (disk0s2) /: 55.57 GB (9.75 GB free) (Low!)
    USB Information:
              Micron Built-in iSight
              MediaTek Inc MT1806 
              Apple Computer Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
              Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
    Startup Items:
              HWNetMgr: Path: /Library/StartupItems/HWNetMgr
              HWPortDetect: Path: /Library/StartupItems/HWPortDetect
              StartOuc: Path: /Library/StartupItems/StartOuc
    Problem System Launch Daemons:
              [System] org.samba.winbindd.plist 3rd-Party support link
    Problem System Launch Agents:
              [System] com.paragon.NTFS.auth.plist 3rd-Party support link
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [invalid] com.Affinegy.InstaLANd.plist
    Launch Agents:
              [System] com.Affinegy.InstaLANa.plist 3rd-Party support link
              [System] com.seagate.SeagateStorageGauge.plist 3rd-Party support link
    User Launch Agents:
    User Login Items:
              iTunesHelper
              System Events
              GrowlHelperApp
              Belkin Router Monitor
    Internet Plug-ins:
              FlashPlayer-10.6: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
              iPhotoPhotocast: Version: 7.0
              Flash Player: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
              JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Outdated! Update
              QuickTime Plugin: Version: 7.6.6
              Scorch: Version: (null) - SDK 10.6 3rd-Party support link
    User Internet Plug-ins:
              fbplugin_1_0_3: Version: (null) 3rd-Party support link
    3rd Party Preference Panes:
              Flash Player  3rd-Party support link
    Bad Fonts:
              None
    Old Applications:
              None
    Time Machine:
              Time Machine information requires OS X 10.7 "Lion" or later.
    Top Processes by CPU:
                  15%          PluginProcess
                  12%          WebProcess
                   3%          EtreCheck
                   2%          WindowServer
                   1%          ps
    Top Processes by Memory:
              120 MB          WebProcess
              70 MB          Safari
              57 MB          PluginProcess
              49 MB          EtreCheck
              45 MB          WindowServer
    Virtual Memory Information:
              1.88 GB          Free RAM
              588 MB          Active RAM
              293 MB          Inactive RAM
              266 MB          Wired RAM
              115 MB          Page-ins
              0 B          Page-outs

  • Captivate won't recognize my microphone

    Captivate doesn't recognize my microphone and therefore I
    can't record my own audio. I downloaded the Captivate updater,
    which is supposed to solve this problem, but Captivate still
    doesn't recognize my microphone.
    I get the following error message:
    "Adobe Captivate could not detect a recording device. Please
    check that a microphone or recording device using line in is
    connected proeprly and tured on. Do you want to try again?"
    Yet my microphone works just fine with GoldWave software
    which I have on my computer. I can record with Goldwave, save the
    audio and insert it into Captivate. But I can't record directly in
    Captivate, which is what I want to do.

    Hi there! By all means! Go to
    the
    page at this link
    to download the hot-fix for the Realtek issue. Keep in mind
    that it is known to work with Captivate 2.0 but I'm unsure of its
    help on version 1.0.1 installations.
    Have a good day, All.

  • Intel iMac won't recognize external display with Dynex mini-DVI adapter

    I've got an original Intel iMac with a Mini-DVI connection on the back. I'm attempting to hook it up to an external display (a plasma screen, in fact). I picked up a Dynex Mini DVI to Video Adapter DX-AP100 for Apple. This connector has a mini-DVI connector on one end, and both a video-out and an S-video-out on the other.
    When attempting to use the adapter, the iMac does not recognize that there is an external display connected. Here are the facts:
    The external display: I've tried this with a Panasonic Plasma screen connected directly through S-video, as well as a Pioneer receiver (one that switches video) connected both through s-video and composite video. And yes, I've got the settings on the TV correct. I've also tried this with a Polaroid LCD TV connected via S-video and composite video.
    I did notice that when I click "Detect Displays" while the Plasma was connected, the plasma briefly "flashed", implying SOMETHING was happening, but still no dice.
    Anyone have any experience with this Dynex DX-AP100 that could share some wisdom?
    OS: v10.5.6
    System Profiler:
    ATI Radeon X1600:
    Chipset Model: ATY,RadeonX1600
    Type: Display
    Bus: PCIe
    PCIe Lane Width: x16
    VRAM (Total): 128 MB
    Vendor: ATI (0x1002)
    Device ID: 0x71c5
    Revision ID: 0x0000
    EFI Driver Version: 01.00.068
    Displays:
    iMac:
    Resolution: 1440 x 900
    Depth: 32-bit Color
    Core Image: Hardware Accelerated
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Built-In: Yes
    Display Connector:
    Status: No display connected

    Yeah, I realize S-video is limiting, but I'm trying to keep things as simple as possible. The TV is mounted to the wall and there are not currently any DVI or HDMI cables coming out of it. There's an S-video input from my receiver that I'd prefer to use since it's readily accessible already. In the end my goal is to use Netflix "Watch Now" on the TV, so I'm not too worried about video quality.
    and before someone asks if I considered that the receiver's S-video input might be the problem...I tried taking the s-video wire from the stereo and plugging it directly into the adapter. No dice.
    ONE ADDITIONAL PIECE of information...while trying to get this to work on an LCD monitor, I plugged the composite video connection from the TV into the adapter. Suddenly the Mac recognized an additional monitor, but it saw it as a VGA monitor, not as s-video or composite video, and no signal went to the TV.
    I'm considering trading in this adapter for a mini-DVI to VGA adapter, but that really won't help me with the connection to the TV.

  • Macbook won't recognize external Hard Drive and issues with Time Machine

    Hello everyone,
    I have just bought a new Macbook Pro with Mountain Lion and I am currently having problems with Time Machine.
    The issue begun in Snow Leopard: Time Machine was taking too long to backup, and would often not finish the backup because the external hard drive would be unwillingly ejected.
    Now with Mountain Lion I have reformated the drive (Mac OS Journaled) and about a third of the way through had the same issue: the drive was ejected before the backup could be finished. I restarted the machine and it happened again. However, now the computer won't even recognize the external drive when I plug it in. I have also tried to power off/on the drive itself to no progress.
    I have tested the USB port with another drive and the port is fine. I have also tested the usb cable and it is fine. And Disk Utility does not recognize the drive (even when I try the >diskutil list command in terminal).
    Now, I can hear the drive humming normally when I turn it on, and it is not usb-powered (my electricity current does fluctuate).
    Could the interrupted backup procedures have damaged the drive? And if so, wouldn't the computer recognize it anyway?
    It is a 4 year old WD 1 TB that is used exclusively for TM and has never left the house.
    Thank you for your time reading this and let me know if you need any more information that could help out.
    Cheers!

    From your description, I'd suspect a failing drive. Maybe time for a new external, especially as you've already re-formatted and it's still playing up.
    I had a similar problem with one of my clone backups a few weeks ago - it failed, I erased it, re-cloned, worked a couple of times and then it failed again. Disk Utility didn't throw up any errors after re-formatting. I guess all disks die at some point.

  • Won't recognize external hd

    I'm a new convert to Mac, the idea of getting a new PC with Vista threw me into a panic and I just bought a new iMac, 20", intel duo, Mac yesterday. Setting it up today it won't read my external Maxtor hard drive. It works fine on windows based computers, but not sure how to make my Mac recognize it, its not appearing anywhere. My whole iTunes library, games, pics and more are on it, I really need to be able to use it as my TimeMachine as well. Someone please help!

    I'm also a Mac/ PC guy, Here is what you need. MacDrive............It's an app that makes Pc and Mac talk to each other fine. Since your stuff is already on a Pc formated drive here are the steps you need to take.
    1. Get MacDrive on your PC
    2. Drop all the stuff off of your HD onto a PC that has MacDrive
    3. Format the drive with Mac Specs, you can do this on PC, Just erase the drive and make it journaled
    4. On your PC , with MacDrive, it will recognize the new harddrive, drag and drop your stuff onto it.
    5. Drag and drop all your stuff onto your mac, or just read from the drive

  • IMAC won't recognize external hard drive anymore

    I am running snow leopard on my IMAC with all the latest software updates. I've been using a LaCie Quadra external hard drive with time machine for backups for awhile with no problems. From the beginning is was plug in the hard drive and go, the mac recognized it. Now, suddenly, it won't. When I turn on the LaCie to back up, the icon no longer pops on the desktop. It is also not listed in the Time Machine preferences anymore. I tried to open the LaCie from Mac systems preferences and get a message with something like "64 bit cannot recognize 32 bit" I am asked to close and reopen system preferences, which would change to 32 bit. I tried that and it did not work,and a report was sent to Apple. Has anyone else been experiencing this? Thanks

    jraguseo wrote:
    Thanks. I don't disconnect the drive, only turn it off with it's own power switch. According to LaCie, this should not be a problem.
    No, it's not a problem for the drive, but neither is leaving it (and Time Machine) on. Most externals will "spin down" after a few minutes of activity, but even if they don't, modern drives are built to run 24/7.
    Time Machine was designed to do quick hourly backups of changes, and will protect you best that way. Just leave both Time Machine and the drive on; they'll be fine.

  • OS X won't recognize external drive

    I bought an external SATA drive, put it into an enclosure, and connected to my laptop. OS X said, "can't recognize drive that you connected; do you want to initialize?" I said yes and it opened the Disk utility, but apparently I tried to partition it before initializing. I got a read/write error.
    Now the disk won't show up in Disk utility even though it shows up in System profiler under "USB High-Speed Bus" as "USB to ATA/ATAPI Bridge". This is what it says:
    USB to ATA/ATAPI Bridge:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 480 Mb/sec
    Manufacturer: JMicron
    Product ID: 0x2338
    Serial Number: 152D203380B6
    Vendor ID: 0x152d
    Any suggestions on how to get it to work?
    Thanks,
    Peter
    MacBook Pro   Mac OS X (10.4.9)  

    If your drive is being bus-powered try using an AC adapter else put a powered USB hub in between. It's possible the external device isn't being supplied sufficient power through the USB bus.

  • CS4 PS won't recognize external

    Hi,
    I bought a external HD to use as an additional scratch disk - Illustrator will recognize it, PS won't.
    There is nothing on the drive right now.
    Anyone have an idea why this would happen?
    OS x 10.4.11
    Thanks

    anyone?

  • Time Machine Won't Recognize External Hard Drive

    Hi there,
    My father has a 2009 iMac running Mac OS X 10.8.3. Recently, Time Machine stopped recognizing his external Maxtor OneTouch backup hard drive.
    I've tried the whole litany of ideas and tips listed in this forum and other websites:
    Rebooting both the desktop and the external hard drive
    Changing USB ports
    Checking Disk Utility (won't even display)
    Can you offer any solutions? He hasn't had an issue before, so it seems to be an isolated incident. This desktop is for his business, so it's very important for the files to be backed up.
    Thanks.
    Update: After submitting this, I received a dialogue box that said the computer cannot read the external hard drive.

    If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
    Check that the data cable is securely inserted at both ends.
    Try a different cable.
    If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
    If you're connecting it directly, try a different port.
    Disconnect all other devices on the bus, or as many as possible.
    Test the drive with another Mac. Test another drive with this Mac.
    If the drive is bus-powered, but has an AC adapter, connect the adapter.
    Boot into Recovery and launch Disk Utility. Is the drive recognized?
    Start up in Safe Mode and test.
    Reset the System Management Controller
    If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

  • Late 2006 iMac won't recognize external monitor

    My late 2006 iMac doesn't recognize an external VGA monitor connected via the mini-dvi port with adapter and cabling.
    Doesn't show up in Displays System Preferences - at times the mouse does show up but not the full display.
    Any suggestions - Am I missing something?
    Thanks
    Bob

    Download the software or driver from the manufacturer's site.

Maybe you are looking for