Two BW systems Can use one source sytem?

Hi Experts,
We are planning to share one source sytem and its all master and LO data sources to share for Two BW systems, is it possible to share like this, we want only the full loads even for LO data sources can we load to BW sytems, sharing like this, Please clarify
Thanks in advance

Hi,
Deinately it is possible.For more information , refer:
https://forums.sdn.sap.com/click.jspa?searchID=1527332&messageID=3118492
With rgds,
Anil Kumar Sharma .P

Similar Messages

How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both.

how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both. From systems Preferences I must select one or the other. I want both to work all the time.

Hi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer

How do I setup multiple users to use one source but manage playlists separately? For example, play counts are specific to each user.

How do I setup multiple users to use one source but manage playlists separately? For example, play counts are specific to each user.

Hi,
Thank you for posting in Windows Server Forum.
Here adding to the words of “Tim”, a forwarder is a DNS server on a network used to forward DNS queries for external DNS names to DNS servers outside of that network. You can also forward queries according to specific domain names using conditional forwarders.
A DNS server on a network is designated as a forwarder by having the other DNS servers in the network forward the queries they cannot resolve locally to that DNS server. You can refer information regarding forwarders and how to configure from beneath link.
Understanding forwarders
http://technet.microsoft.com/en-us/library/cc782142(v=ws.10).aspx
Configure a DNS Server to Use Forwarders
http://technet.microsoft.com/en-us/library/cc754941.aspx
Hope it helps!
Regards.

My wife and I have two seprate iTunes libraries using one email address/account. How do I split mine off without loosing my library

My wife and I have two seprate iTunes libraries using one email address/account. How do I split mine off and transfer my library?

See this -> syncOtunes

TS4020 how many devices can use one icloud account

Is there a limit on to how many devices can use one icloud account

*GE TAG - Don't you just love how people in forums answer their own question rather than the one being asked.
Let me help those that have responded so far, and those still awaiting an answer.
An account for iCloud does also include log-ins for the iOS App Store / Mac App Store / iTunes Desktop Application , but an iCloud account on any device iOS / Mac / PC does not have to match the App Store / iTunes account which certainly has its account login limitations per device as has been pointed out.
What seems to be ommitted is if there is a limit to an iCloud account per X number of devices.
In my estimation there appears to be no limitation for iCloud accounts per device. I say this only with the experience of having my own iCloud account on a MacBook Pro, Mac Mini, iMac, Apple TV Gen2, Apple TV Gen3, iPhone 5S, and an iPad Mini Gen 1.
That is 7 separate devices. Never once have I been prompted about a limit when setting up my iCloud account (which constitues Contacts / Calendar / Notes / Reminders / Documents in the Cloud / Keychain / and Photo Stream and not purchased content through App / iTunes "stores" which do give such prompting upon authorizing your respective device for being able to use / sync said purchases)
I've really only come to this realizatoin upon thinking this through after reading this thread. I was actually searching for this answer myself until now. If I'm wrong I will welcome a rebutal with proof.

Connecting two BW systems to the one R/3 source system

Hi all!
I have to connect two BW Systems to one R3 system. In our last tests we have had problems trying to connect two BW servers simultaneously with R/3 source system because it allows only a logical system name for each R/3 client, and (We guess that we need to define tow diferent logical system name, one for each connection). This has been generating errors when we try to load data from R/3 to BW because, we guess, R/3 does not recognize the BW source system in the ALE connection for someone BW systems at transfer data. In this moment I have one connection active (BW1-R3). The BW2-R3 connection is already inactive. Does anybody know how perform this? we need solve the transfers problem as soon as possible.
Thanks! Judi

Ah...
please don't post twice the same question...in these forums we are always the same !!!
You can close this thread to avoid to look in two different posts...
Bye,
Roberto

Can two ERP systems talk to one SCM?

Hello Experts,
We have a requirement to connect Two ERP systems to one SCM system?
Is this option available is available in SCM? CIF processing and optimizer should divide for the two ERP systems in SCM.
Please advice .
Thanks
Ramesh

Hi Ramesh,
Yes; it is possible to integrate multiple R/3 systems with single APO. You need to define multiple business system groups in APO and assign to different R/3 logical systems to be integrated(transaction /SAPAPO/C1 and /SAPAPO/C2). Also you can use CIF enhancements APOCF001 on APO inbound to attach (suffix) a unique R/3 identifier along with product and location codes. For this, you have to maintain a Z table containing the required suffixes. You may further refer to application help in the enhancement transaction.
Regards,
Raghav
Edited by: Raghav_Udupa on Jun 17, 2010 4:29 PM

I have two IMacs and I want to set them up so i can use one keyboard and mouse- How do i make this happen?

How do i make it happen so I can use two seperate iMac computers as one set-up with one keyboard and one mouse?

If the keyboard and mouse are wired, then a USB KVM switch will work.
If they are wireless, you should be able to connect the wirelessly via Bluetooth settings. discover the same keyboard and mouse on each iMac.
However, you cannot use them on each iMac simultaneously. I think it would be rather difficult for you to switch between them (disconnecting and reconnecting them over and over again).
Most iMacs come shipped with a keyboard and mouse by default. How come you only have one keyboard?
Keyboards and mice are not that expensive either.

Two SRM systems connected to One back end system

Hi..
Note: I have posted this message earlier ......but couldn't find that. I am just reposting the message:
In our quality environment, we have two SRM and two backend systems. One for testing purpose and other for training purpose. We are planning to remove one back end system and connect both the SRM systems to one backend system.
1. Is it possible to have this landscape?
2. In SRM & R/3 we can define two RFC connnections but from R/3 side, I am not sure how the system will determine the respective RFC connection during GR or any other process.
3. Are there any other difficulties?
We are in SRM 4.0 using Extended classic scenario. We are using SRM for processing shopping cart, Po and confirmations.
Please advise.
Thanks.

Hi Prashanth,
is very much possible.
for this you need to configure the partner profiles.
need to define port
need to configure inbound paramters and outbound parameters.
we20 - create partner profiles.
define outbound parameters and inbound parameters of the message type.
we21 - define port.
under Transactional RFC.
and create a distribution model and add message type.
revert back to me if any problem still you find.
regards
sai

Creative cloud complete, how many can use one membership

Dear Adobe,
We both using adobe cs6. One in windows and other is in Mac. If i take membership in CC complete, how we both can use it?
Anoob

Not sure what you are asking. If you already have working CS6 licenses for different platforms, you have 4 activations and each could use it on 2 systems. That will be the same if you upgrade two 2 licenses of CC.
Mylenium

Combine two BW Systems in to One system

Hi,
There are two BW systems in my company lets say A & B.
Now we plan to combine two systems(A+B) in to one New BW system Lets C.
Can ony one please tell me what are the steps i will have to follow ?
What are the complications/Precautions i will have have to take ?
Thanks in Advance.
Regards,
Vaibhav

Did you resolve this? if yes how ? please let me know.
Thank
Shaik

Two SCM Systems connected to one ERP System

Hello Experts,
Here again I got a doubt.
Is it technically possible to connect two SCM Systems via CIF to one ERP System?
Because I heard that we could connect more than one ERP System to one SCM System, but not vice versa.
If you have seen a system in production like this, what are the pros and cons of having such a scenario?
Expecting your valuable replies!
Thanks and Best Regards,
Suresh

Hi,
technically it's no problem to connect two or more SCM systems to the same ERP system. We have one for DP/ PP/DS, one for EWM and one for SNC connected to the same R/3 systems. You however might get problems with the bom explosion for planned orders being sent from SCM to R/3.
The bom explosion uses field MARC-APOKZ which is maintained automatically by CIF. If there are multiple SCM system using CIF for product master data the field might not be set up correctly and the bom explosion could be wrong.
As a solution SAP provided OSS note 1576703.
Regards.
Hubert

Airport I just can use one device to connect with the internet, PPoE setup problem. Can't get the right ip

My airport exrreme can't get the right ip if I try to make a new network
I use also the apps
I have 3 devices but just can used always one
My ip and my user name is from the university
I need to fix the ip, username and password in the airport extrem, but he always copy a wrong ip in the system
Thanks for help
Elias

You're only allowed to authorize 5 devices with your apple id.
How many have you got authorized?
Maybe deauthorize one of them.

How many iPads can use one content viewer login?

Hi all,
We have a client who is wanting an app built in the next few months but needs a smaller version up and running in the next few weeks to get them out of a tight spot.
I've suggested that we give them an Adobe ID seperate to ours and load the interim app up there for reps use while we keep building the final one seperately.
My question is, how many iPad's can use that login and download the app to the content viewer and use it like that. They will need to use it on about 40 iPads...
(I hope my question makes sense)
Cheers
G.

Unfortunately the only time an Adobe ID belongs to the company instead of the individual is when the company signs on as a DPS customer and creates the ID under their master admin account in the DPS admin portal. All other uses of Adobe ID belong to an individual and not a company. In short, Adobe tech support isn't going to be able to help a company "reclaim" an Adobe ID if it is used this way.
Just fair warning for those that are sharing Adobe ID credentials and using this method to share content.

I Can use one memory 8GB with one the 2 Gb together in macbook pro early 2011

I Can use two stiker memory, the 8 an 2 GB it's same time in macbook pro eraly 2011 2,3 Ghz intel Core i5
sds

You can as long as it's the same speed. 1333MHz.
It is however, better to use the same size RAM.

Two BW systems Can use one source sytem?

Similar Messages

Maybe you are looking for