Two pink "things" at bottom of hard disk icon in sidebar

This is a new one for me. I just noticed that the hard disk icon in my sidebar, as well as in finder preferences where you choose it for the side bar, has 2 little strange pink things at the bottom of the icon. There have little pink vertical pink lines coming out of them. The icon directly on the desktop is normal. I took a screen shot of the one in the side bar, but don't know how to include it (if that is even possible), in this post. Anyway, I restarted my computer and luckily it when away. What in the world was that and should I be concerned about it? Thanks so much!
LHM

Hello LHM:
I never saw anything like that before, but you have corrected the problem. It is somewhat arcane, but a restart sometimes fixes problems.
Barry

Similar Messages

  • How can I get my LaCie external hard disk icon to reappear on my desktop?

    The iMac discussion section does not seem open to me asking this question. It's geared to the Intel Macs or other categories which do not allow for me to type in the following question:
    Bottom Line Question:
    How can I get my La Cie external hard disk icon to re-appear on my desktop?
    Background:
    I clicked Go > Computer
    At that point there the usual set of icons in the far left hand column, including one for my LaCie external hard disk. Near that icon there was a dark upturned truncated/shortened arrow. I absent-mindedly clicked on that dark arrow, and at that moment I could hear my LaCie external hard drive power down; I heard the sound of hardware powering down.
    The LaCie external hard drive is sitting right next to my iMac and its blue light is ON so I know that at very least I didn't turn it off.
    But where is it?
    And how can I get it to reappear on my desktop?
    Right now when I click onto Go > Computer, the LaCie external hard drive disk is NOT THERE.
    Thank you.
    Lorna in Southern California

    James, yes. I put the question in the iMac section and did get some solutions. My LaCie external hard drive is back now. I was aware that the arrow is connected to Eject actions, but was concerned when I went to Finder Preferences and selected the LaCie to show up on the Desktop, and its icon did not show up on the desktop. I hope you and your family are enjoying the weekend, James. But how could you not: You have little Kate there with you. Lorna in Southern California

  • Help.  Lost my hard disk icon

    I was foolishly cleaning my key board with my computer on when I seemed to have done something to have made the icon for my PowerBook's hard disk icon to have disappeared. I've tried zapping the P-Ram, booting from an external hard disk and running Disk First Aid and running a search to see if the icon got accidently put into a folder somewhere. No luck. I am able to get into my files by going down to the dock and clicking on the two faces icon which brings up a window that shows my hard disk. But I can't seem to get the icon to appear on the desktop. Any ideas?

    Try going to the Finder menu item "Finder" and select Preferences. Verify that in the General section the box is checked to Show Hard disks on the Desktop.
    Francine
    Francine
    Schwieder

  • Curious -- Startup question (Hard Disk icon appear and computer is frozen)

    I came home today, turned on my new MacBook Pro 15" and stepped away. A very few seconds later I came back and instead of seeing everything all loaded up as usual, I got a grey screen with a picture of my hard drive in the center with an arrow pointing up towards it under it. I tried to use my mouse, to no effect. Everything was just frozen. No question mark or warning, just a photo-realistic picture of my hard drive (or a standard Apple hard drive) and that arrow. I clicked the power button, and it restarted and everything worked fine. Could someone give me some advice/feedback as to what this was? Is it symptomatic of a more serious hard drive problem?

    Wonderlad: If your MBP started up just fine on the second try, and you were able to run Disk Utility's Repair Disc routine twice on it (as in fact you did) without any major problems showing up, you probably have nothing to worry about. It sounds as though you inadvertently pressed the Option key the first time you started up (when the hard disk icon appeared and the startup didn't continue), or made some other minor mistake of that sort.
    Each of your hard drives is represented by at least two lines in the left pane of Disk Utility. The upper line for each drive shows the drive's manufacturer and model number (in the case of an external drive, it's the drive unit inside the enclosure, not the maker of the enclosure); the line or lines indented beneath that one are the volumes (partitions) you've created on the drive. It sounds as though each of your drives has only one volume on it, and if that's true, the Repair Disk button has the same effect regardless of whether you've selected the drive mechanism or the volume on it.
    When there's a CD or DVD in your optical drive, the optical drive mechanism and the disc also appear in Disk Utility's left pane. Disk Utility can't repair them, though.

  • My home folder and my Hard disk icon have dissapeared from my mac. How do I get them back?

    My home folder and my Hard disk icon have dissapeared from my mac. How do I get them back?

    Try a restart. If the problem is the same, try deleting the com.apple.finder.plist.
    Either hold down the option key while using the Finder “Go To Folder” command
    and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Preferences/com.apple.finder.plist.  Move the .plist to your desktop.
    Relaunch Finder (command - option - esc) and test. If it works okay, delete the plist from the desktop.
    If the same, return the .plist to where you got them from, overwriting the newer ones.
    If you prefer to make your user library permanently visible, use the Terminal command found below.
    Show User Library
    You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.

  • Desktop hard disk icon gone

    After installing Yosemite update (10.10.2 (14C78c)), hard disk icon on the desktop has disappeared.
    Of course, I checked "Hard disks" from finder preferences.
    How can I make the icon visible?

    Obviously the harddrive is still working
    You may have a corrupted .plist file, but which one I don't know. Someone else might.
    If you plug in an external drive does that Icon behave the same way? Or does it work normally?
    If you right-click the icon when you see it and select "Get Info" and leave it up does it stay when the icon goes away?
    Is the name Macintosh HD?
    Try changing the color of the icon - see if that does anything.
    Lastly, create another user with limited power and see what happens to the harddrive under that other user.

  • Hard disk icon disappeared

    After migrating from an older 24" iMac to a new 21" iMac Intel, the hard disk icon does not appear on desktop.  Is this the way it's supposed to be?

    Check Finder->Preferences->General->display these.

  • Can't get external hard disk icons to appear on iMac desk top

    Hi guys,
    I hope someone can help me. I have OS X Lion on my iMac. I noticed that a few days after installing it, my external  hard disk icons and  Macintosh HD icons  disappeared from the desktop. I tried going to Finder- Preferences- Show these items on desktop and checked the appropriate boxes but this only restored the Macintosh HD icon to the desktop. Checking the "External disks" box makes no difference. When I open Finder I can see the external hard disks in the sidebar so I don't think there is a problem with the disks. Can anyone advise me on how to restore the external hard disk icons to the desktop?
    Thanks a million

    I'm not sure why they're not showing but try doing a couple of troubleshooting steps. Restart the machine in the Restore Partition, when you hear the startup tone hold down the Option key and choose the Restore Partition. Then open Disk Utilities and Repair Disk Permisssions on your internal HD at least 2x, while you are in DU it wouldnt hurt to run Repair Disk, again 2x. Then restart the computer in Safe Mode to clear some caches and finally restart normally and check.

  • How to rename the "Windows" hard disk icon in the boot options screen

    I have been able to rename the "Recovery HD" hard disk icon in the boot options screen by finding its mount mount and running
    sudo bless --folder "/Volumes/Recovery HD" -label "Mac Recovery".  When I do this for the Windows object, it is not renamed, even when the Windows partition that it represents is formatted FAT32.

    Update 2013-05-08  sudo bless --folder "/Volumes/Win OS"  -label "Win OS" fails with "Could not write scale 1 bitmap label file".  "Win OS" is the name of the Windows folder in Finder.

  • Weird Problems, Hard Disk icon dissapears and more

    When i startup my computer, my hard disk icon dissapears. I have been to another website and i can use applescript and enter this :
    tell application "System Events"
    set visible of disk "NameofDisk" to true
    end tell
    tell application "Finder" to quit
    delay 1
    tell application "Finder" to launch
    well this all works find and dandy but once i shut down the computer and start back up it dissapears again.
    and also when i start my computer it asks for the keychain password, i enter it and it goes away. but it comes back up every time i login to my account. i have had these issues since i have installed in on my laptop. no issues at all on my mirror drive 1.25ghz g4.
    ANy ideas???
    help help

    anyone got any ideas??

  • Hard Disk icon has vanished

    The Hard Disk icon has vanished from my Desktop, and the sidebar of the Finder window.
    If I use the little path tool in the toolbar of a Finder window the Hard Disk name is greyed out and I can't select it.
    I can navigate to it using the Terminal, or the Go To Folder... menu item, but I can't get it to appear back where it belongs on the desktop.
    Any ideas?
    Phil

    Open the Script Editor in the /Applications/AppleScript/ folder and run the following:
    tell application "System Events" to set visible of alias "name of hard disk" to true
    tell application "Finder" to quit
    delay 1
    tell application "Finder" to run
    Insert the name of the hard disk between the second pair of quote marks, and press the Run button.
    (15142)

  • Unable to make tWo concurrent logins to the firewire Hard Disk from RHEL 3.

    Hello
    I tried setting up a firewire(shared storage) ORACLE 10 G RAC CLUSTER using OCFS/ASM using your install guidelines
    but this failed.Below is the scenario.
    Hardware : compaq intel PC's with 1 GB RAM
    Members in the cluster : Two
    Operating system : RHEL AS 3 / FEDORA CORE -3 (both being tried one after the other)
    Oracle 10G RAC version : 10.1.0.3.0
    HDD : Maxtor one touch II 250 GB with combo interface Firewire/USB 2.0
    N/W Adapters : Two public interconnect,Two private interconnect thru 10/100 internet Hubs/switches
    Firewire card details: FireWire (IEEE 1394): Agere Systems (former Lucent Microelectronics) FW323 (rev 05)
    Failure Description
    I successfully loaded the drivers for the Maxtor one touch II in the two Linux (RHEL 3) boxes. But after a restart, at any point of time,
    the disk is detected only by one node. It is detected in the other node only if the first node is powered OFF. On investigating we found the
    following error message by running "dmesg | grep sbp2" command as root
    ieee1394: sbp2: Query logins to SBP-2 device successful
    ieee1394: sbp2: Maximum concurrent logins supported: 2
    ieee1394: sbp2: Number of active logins: 1
    ieee1394: sbp2: Error logging into SBP-2 device - login failed
    Please do suggest where i was wrong and how to proceed next.
    Thanks & Regards
    Raghavan

    Hello All,
    I work as the system admin for Raghavan. Thanks to all those who took time to reply to our queries. Sorry for the lengthy mail. Let me go through the whole sequence of what we did initially.
    1. Installed RHEL 3 with Agere PCI Firewire cards.
    2. Installed Firewire Kernel kernel-2.4.21-27.0.2.ELorafw1 on top of it.
    3. Modules were loaded properly and the Firewire hard disk was accessible from both the nodes.
    4. Everything went fine during OCFS and ASM installation.
    5. We were installing the CRS and that too went fine till 99% and the final step of running the root.sh in one of the nodes gave an error message as follows
    "Failure at final check of Oracle CRS Stack
    0"
    6. So we thought of reinstalling CRS and deleted the Voting disk file directly from the shared disk. We deleted the file manually from one of the nodes using the "rm -rf" command and that too before uninstalling OCFS.
    Now both the disks went out of sync. The voting disk and CRS file was still visible from the other node. So we did a reboot of both the nodes one by one. After this MYSTERIOUS reboot at any point of time only one node was able to detect the hard disk.
    Finally after nearly two months of head scratching (really lost lot of my hair in this :)) we were able to get concurrent logins from both the nodes now! Thanks to the reply by Member no 279089. I bought and installed a TI(TSB43AB23)card on one node and a VIA chipset card on the other. And finally the magic worked. I am able to partition the disk and the partitions are visible from both the nodes.
    But now we have a new problem. When we invoke the OCFSTOOL from one node (VIA card node), the previous OCFS partion (the one which was done before the MYSTERIOUS reboot) is still shown. I removed the /etc/ocfs.conf file and still it is being shown in the ocfstool. I tried to ignore this and continued creating the OCFS partition from the other node (TI card node) using the mkfs.ocfs command. That too ran fine without any error messages and was able to mount it under /u02/oradata/orcl. When I try to mount the partition from VIA card node it is giving me the following error
    # mount -t ocfs /dev/sdb1 /u02/oradata/orcl
    mount: wrong fs type, bad option, bad superblock on /dev/sdb1, or too many mounted file systems
    I get the following in /var/log/messages
    Jun 29 21:16:40 testrac1 kernel: SCSI disk error : host 2 channel 0 id 0 lun 0 return code = 8000000
    Jun 29 21:16:40 testrac1 kernel: Current sd08:11: sense key None
    Jun 29 21:16:40 testrac1 kernel: I/O error: dev 08:11, sector 69
    I tried googling with the above error message and they seem to point hands towards VIA chipsets. But I am not sure. Please guide us on what needs to be done to resolve this issue if you have faced it before.
    Thanks in Advance
    Jei

  • Desktop "Hard disk" Icon wont stay were I put it.....

    Ok this is REALLY annoying me. I have tried to move my desktop "disk" icon (the link to your personal hard disk) to a different position on my screen, I want it at the bottom near the right hand side, every time I move it stays where I want it untill I log out or restart, upon loging in it has moved back to its default position in the top right of the screen.
    I have tried many things:
    Trashing various .plst files
    Various combinations of "snap to grid" and "arrange Icons by". But to have the icon where I want i have to have both arrange by and snap to grid UNCHECKED.
    I know if you put an icon to close to the side of the screen then it will be moved automaticaly so I have also tried placing the icon dead centre on the screen and then restarting, the icon still moves back to its default position.
    This is extremely annoying and any help would be greatly appreciated.
    Thanks Alot!

    No Ideas anyone? This is such an annoying problem!

  • Hard disk icon on desktop not right

    Hello,
    When I logged into my imac today the icon on my desktop for the hard disk doesn't say "hard disk" underneath it anymore. Instead it says /'/:;'/'/l\\] If I go into Finder and Go the list of places I can go has the same thing there too. I restarted the computer and it's still there and I don't know why it's like that or how to fix it. thank you for any help anyone can give me.
    Niki

    Follow Niels advice however after you press Enter type in the name you would like it to have then press Enter again.

  • Hard Disk Icon?

    I have accidentally created an icon of my Hard Disk on my desktop. Please can anyone tell me how to hide it?

    If it's the hard drive itself, open the General tab of the Finder's preferences and turn the option off. If it's an alias, delete it.
    (72606)

Maybe you are looking for

  • Password Protection: Controls, etc

    Hi everyone, I was just wondering if anyone had any ideas regarding password protection of controls. More specifically I am interested in "protecting" these values while the VI is NOT running. I have developed one or two methods to do this, but both

  • Problem with xls attachment

    Hi , I have a problem while receiving xl attachment can anyone guide me. Thanks, Yogesh

  • ORA-01804: failure to initialize timezone information

    Hello, I am having an issue to connect my C++ application to my Oracle DB. When my code calls oracle::occi::Environment::createEnvironment(), I get an error "ORA-01804: failure to initialize timezone information". The application works on other peopl

  • How to customize an Excel web app?

    Hello, I'm planning to add an Excel based fixed deposit calculator to my website.  I found that it is possible by uploading an Excel document to the SkyDrive and embedding the code generated. My question is, can we modify the size width and other par

  • Does anyone know why timeline videos can go blurry when they were clear and sharp just a few hous ago?

    Hi everyone, I imported some fideo files and I turned the to slow motion (50%), and then video quality to Optical Flow. They all looked great in the timeline and viewer theese last few days but today, after using 2 monitors for 20 - 30 minutes, I swi