Two Program Monitors in Premiere Pro CS6?

Is it possible to have 2 program monitors in Premiere Pro CS6? I'd like to view the composite video and scopes at the same time.
Thanks,
David

Use a "Reference Monitor"  for your scopes

Similar Messages

  • Sluggish timeline and glitching/freezing program monitor in Premiere Pro CC 8.1

    Hi all,
    I've recently switched from CS6 to the 2014 Adobe CC due to a student license expiring. I'm also somewhat new to r3d workflow so chances are I may be doing something wrong.
    I've worked on one other project with a mix of r3d and DSLR footage in CS6, but this is my first time cutting with red footage in Premiere CC.
    *Apologies in advance for the novel, but I figured I'd be as thorough as possible to hopefully help get this issue resolved for myself any anyone else who's experiencing this.*
    I'm cutting a 9:30 "party mix" in a music video style edit. So far I've had several (seemingly random) issues and glitches, that have been making my life exceptionally difficult and this 10/30 deadline exceptionally scary.
    I'm working with content that we captured using exclusively RED Epic Dragon, and Epic Mysterium cameras. We recorded with several different frame rates, with varying resolution, compression, and aspect ratios. Project was set in-camera to 23.976.
    Issue #1
    I've created a nearly two hour, organized roll of sub-clip selects in a RED R3D 2K 23.976 16x9 timeline, in which i'll use to browse my raw media when sequencing on a timeline stacked directly below.
    Often times when pulling clips from one timeline down to the other, the over-all responsiveness of the program will become ultra sluggish. Causing a clip (that's being dragged/placed) to lag heavily, maybe a couple seconds behind my cursor. This issue will often resolve itself after maybe 5 minutes or so, but makes fluid sequencing rather difficult.
    Issue #2
    The other issue I'm having is a glitchy or completely unresponsive program monitor. Again this issue appears to be totally random, and seems to happen most when I'm deep into some really intense sequencing/ clip arrangement, and scrubbing quickly.
    Usually a portion of a single clip (or sometimes a couple clips) will freeze up in the program monitor while I'm scrubbing over them on the timeline. This will sometimes cause them to freeze all together during playback as well as cause surrounding clips to lag a bit (maybe 4-8fps).
    I'll scrub back over the problem area and sometimes get a solid green bar halfway through my image, usually right before the program monitor just reads solid black throughout the entire timeline. This issue is temporarily resolved by restarting the program (about every 15-30 minutes).
    Issue #3
    As I'm scrubbing I'll also experience heavy glitching with both my image and the program monitor GUI itself. However, this issue typically wont affect playback.
    I've uploaded a quick camera-phone video of this issue as it's a little tough to describe Program monitor glitch - YouTube
    I know the timeline is un-rendered in this sample, (but this issue happens either way).
    Two painstaking weeks later, I've finally completed the first pass.
    Working on revisions now, and ultimately I'd like to copy paste the sequence into a 4K timeline for before After Effects work and export.
    I tried pulling it into a 4K timeline (with playback set to 1/8 res) and the issues stated above got 10x worse.
    Sticking to the 2K timeline for now (with playback at 1/4 res)
    P.S. I'm also cutting a much simpler corporate project with 5DMKIII footage and having no real issues.
    As for my rig,
    I'm running Adobe Premiere CC 2014 v8.1
    Freshly installed Windows 7 Professional SP1 PC Desktop
    Freshly installed Samsung 1TB SSD running my OS and Adobe CC
    Intel Core i7-2600k CPU at 3.4GHz (8CPUs) - Watercooled
    16GB Ram (3gb allocated for other programs)
    Nvidia GeForce GTX 570 4GB GDDR5 - 3.40.62 Drivers installed
    Pulling media from 2x 3TB Seagate Barracuda 7200RPM drives, striped at RAID 0
    Thanks for reading!
    -Sam

    So it seems to be behaving slightly better in "Software Only"
    Though slightly less frequently, I'm still running into the issues stated above, mostly issue #2.
    I also have a new problem to add to this thread as I'm starting to pull clips into After Effects.
    First being that (again, seemingly random) dynamic-linked clips decide not to show up on the timeline in AE, and then seem to vanish from the program monitor in Premiere as well.
    As you can see in the screenshots attached- After Effects see's the media itself from which the clip came from, however it won't show up in the monitor.
    I'm also having issues where I'll render the Premiere project with the dynamic linked clips that DO work, and then as soon as I restart the program, those previews are gone and I have to re-render the the AE Linked comps.

  • View two program monitors to match colors (CS6)

    Hi,
    I'm trying to color match two shots and I'd like to be able to view them side by side while I adjust the colors in one of the shots. It seems like a good way to do this would be to view two program monitors side by side - but is that possible? I can't see that option anywhere.
    Using the source monitor for comparison doesn't make sense to me as I've already color corrected the reference shot and the source monitor shows the original footage (ie. the wrong colors). I could of course try to match the shots based on the source footage of the reference shot and then apply a second color correction but that seems a bit unnecessary to me.
    Or - I remember that in FCP7 there is  an option to use split screen while color correcting two view two shots simulatenously side by side in the same screen/monitor. Is there anything like that hidden in PPro?
    I'm also happy for any other suggestions on how to do this.
    Thanks!

    Open  the graded clip  in a Reference Monitor.
    Un gang Ref Monitor from the Program Monitor and then start work on the other clip.
    eg.
    or..maybe
    Quick and dirty way...
    Frame Grab graded clip. Open it in the Source Monitor as reference. Flick back and forth.
    BTW: CC Speedgrade has excellent multi monitor support  (2 or 3 playheads) for this  as well as a fairly good match clip facility (FWIW)

  • Premiere Pro CS6 very bad YouTube quality.

    Hello,
    Before asking me to look further on google because there may be my answer, i say that i've searched/posted/asked everywhere i could.
    I use fraps to record some in-game footages, the file bitrates are huge 500-900M, i then render them in premiere pro as i need to add an intro/ending and then i upload them (or i'm hardly trying to) on youtube.
    The thing is I've used every setting I could ever find, contacted youtube users who managed to do it right, but after I upload the video on youtube, the quality is absolutely horrible.
    Right after i render i check the video, the quality is perfect, after that I upload it to youtube and after processing the video, it looks like it has 1M bitrate, laggy.
    Can anyone please help me to solve this problem?
    Thanks!
    RAW clip bitrate: 500-900M
    Render settings from Premiere Pro CS6:
    Format: H264
    Resolution: 1280x720
    Frames per second: 30
    Field Order: Progressive
    Aspect: Square Pixels (1.0)
    TV Standard: NTSC
    Profile: High
    Level: 5.1
    Render at Maximum depth: Checked
    Bitrate settings:
    Encoding: VBR, 2 pass
    Maximum bitrate: 20M
    Minimum bitrate: 20M
    (Tried with smaller bitrates too, like 8/10/15, the output file wasnt so clear but youtube would still kill it)

    OK. Here is what I have done.
    I took took your crisp video of game play and dropped it on the New Item button to create a sequence. I checked the sequence and saw that the video was 1280X720 using 30 frames per second. Not 29.97, but 30. That could be relevant.
    Then I took this screen shot of the video playing in Windows Media Player and in the Program Monitor of Premiere Pro. I see some degradation even at 30Mb/s which suprised me to be honest with you.  I read through the YouTube help and they recommed 30Mb/s for 720p so I exported at 30Mb/s.
    The easiest place to spot the degradation is in the space above the letter E (before the CK) in the upper left of the frame. Some of the texture is missing.Not much. It is ever so much softer. But I don't believe that it will prove to be relevant.
    So, now it is time to upload to YouTube and see what happens.
    Darn, I have no way to play the YouTube video at exactly 1280X720. I just have full screen and the larger box.  Is there a way to do that? Other than setting my monitor for 720p or playing it on an old HDTV?
    Oh well, here it is. Reasonably clean going in. How about coming out? Not so much. I am not happy with it. I am going to try again using CBR just for the heck of it. Crud. That didn't help. See for yourself.
    I am stumped. Somebody with the capability to see it at the exact size speak up please. How is it done. (I use Chrome.)
    Edit: I found a YouTube resizer that sets the medium box bigger - to 1280X720. I knew it had to be possible. But I am certainly not happy with the changes YouTube makes to a 30Mb/s file.
    I am off to go try Vimeo.
    Edit:
    I am not happy with this either.
    There is something about this video that makes it difficult for them to encode it. I have no idea what it might be. Perhaps the more technical among us can provide answers. It is not horrible, and it is better than 480p, but it isn't great.

  • Why are Adobe Premiere Pro CS6 source and program monitors playing each others footage?

    Why are Adobe Premiere Pro CS6 source and program monitors playing each others footage? I import my footage into the project like normal. I drag it to the source monitor on the left hand side to set in and out points then I drag it to the time line. The footage drops into the time line with no problem but when I go to play the footage in the time line it plays back on the source monitor and not on the program monitor like it is suppose to. Other times ill drag the clip to the time line and trim it there and it will be fine and show up on the program monitor.  Then ill go try to set a clip to have in and out points (which is suppose to show up in the source monitor) but it shows up in the program monitor. The clip is not even in the time line it should not be on that monitor! I have updated the program to the late update. I have re installed the program numerous times and I have even ran the Adobe Clean up program. Couldn't find much on this problem. Please help thank you! I have a PC. My computer is also way over the recommended minimum specifications to have the program installed on.

    Definitive Answer (I believe): It's all about this setting, "Write XMP ID To Files On Import" - which confirms that Adobe Premiere Pro is deliberately modifying the .mov file: http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
    These posts give some background as to why having this setting enabled would be beneficial: one benefit being to be able to skip conforming files by matching the conformed file with the original using the embedded XMP tag :-
    http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
    http://www.dvinfo.net/forum/adobe-creative-suite/498627-why-premiere-modifying-video-files .html
    https://forums.creativecow.net/thread/205/876064
    (Found using Google search term "adobe premiere pro date modified")

  • Can choose 5.1 in Audition CS6 for monitoring, but not in Premiere Pro CS6

    System: Z820, Win 7  Ultimate x64
    Audio: Creative SoundBlaster Recon3D PCIe, Altec Lansing 5.1 speaker system
    SW: Master Collection CS6
    I've been using Premiere Pro CS6 for a while now, but only for stereo video projects. I recently started working on a short film and needed 5.1 Surround Sound as well. I created a 5.1 surround track in Au, and have been able to monitor the sound and surround panning effects in Au during development. Here are the Audio and Channel Mapping settings I used to get my 5.1 to work so I could monitor it:
    As can be seen, I've chosen the default MME Device Class here, and all seems well. I have 6 channels identified and mapped to the right corners. I've also confirmed my Master Track in Au is 5.1 Surround. I exported a 5.1 WAV and imported it into Pr, into a 5.1 surround session, confirming that both the track where the WAV file landed and the Master are both 6 channels (and although the order is displayed differently, the content correctly mapped from Au into Pr).
    Now, my fun began. When I monitor the audio in Pr, I hear only Stereo. So, I check my channel mapping in Pr, as shown below:
    As can be seen here as well, I've chosen the 'default' Premiere Pro WDM Sound. I've learned that WDM is a newer version of MME and encapsulates all the functionality of MME. I'm not sure why Au uses MME and Pr uses WDM. However, as shown, with WDM chosen, I only have 2 channels in the mapping dialog to work with, not the 6 I have (and had in Au). Nothing I can do will produce those other four channels.
    As seen in the drop down captured in the above screen grab, I also have ASIO4ALL installed, but that too only shows 2 channels in both Pr and Au. Interestingly, when I hover the mouse over the speaker selection in the ASIO4ALL control panel, it only indicates there are 2 channels (but indicates that there are 6 INPUT channels). The Creative SBZ Series ASIO option is no better, providing only 2 channels.
    So, I was off to check my system settings, which are all shown below:
    As seen above, Windows knows there is 5.1 surround on the system, and the Test available  in the bottom left dialog proves that each speaker is configured and working correctly. Audition also knows there is 5.1 available on my system and uses it correctly as described earlier. However, Pr refuses to recognize this and as a result I am unable to monitor any 5.1 surround projects on my system. If neither Au nor Pr worked, then I'd mark it down as Sound Card or Driver issues, but since one Adobe product uses the system audio correctly, and the other doesn't, it leads me to believe that it is Pr who is at fault.
    So, my question is this: Why won't Pr recognize my 6 output channels like Au does?
    Any advice would be appreciated.
    Cheers,
    Shane

    ryclark, I believe you are correct in that Au uses MME while Pr uses WDM, but both MME and WDM (which, according to the Microsoft specification, encapsulates ALL of the MME capabilities, and expands on them) are 5.1 capable. I can play my export from Au as a 6 channel interleaved WAV file as well as an AC3 conversion  of that same file in both VLC and Windows Media Player and get the same 5.1 channel surround sound field I do from Au.
    After more research, I'm beginning to think this might be a result of the fact that Pr is 64 bit and Au is still 32 bit in CS5.5 and 6. I don't know if Au CC is 64 bit, but if it is, I'd be interested to know if what I am seeing is reproducible in the CC versions of Pr and Au (to eliminate the 64 bit vs 32 bit argument). Some have suggested that perhaps the standard SB driver is only 32 bit, although it 'supports' 64 bit supposedly, but maybe Pr just can't handle that 32 (faux 64) bit driver. A possibility.
    Thanks for the read and response. Seems lots of people are in this boat together. You have recommended elsewhere to use an external audio interface, but just to do 5.1 monitoring (I don't do any live recording to my PC, this if for movie sound post/mixing) sounds pretty clunky. At the least, I think I'd need not only an external audio device with at least 6 channels out, but a receiver to take those outputs, and 6 new audio speakers to connect to that AVR. I currently use my computer's soundcard, as you know, and your standard 5.1 powered computer speaker system attached to that. Not the best, I know, but at this point, I'm just going for surround, but THX, so it is sufficient ;-).
    Cheers,
    Shane

  • Downloaded adobe premiere pro cs6 on computer but can't find program

    So today I've downloaded Premiere Pro CS6 3 times on my computer. All 3 times I can't find the program on the computer. My Creative Cloud is showing that it's installed, and if I check the "Uninstall" Folder, it's showing that's it's there too. I've done a search on the computer and it's no where to be found. Any help will be greatly appreciated. I have a Windows 7.

    I'm having the same problem as pinpointdenise and I'm also using Windows 7.
    It says it has downloaded but is nowhere to be found on my system. There's no folder, no trace of it.
    Yet if I go to 'uninstall', I can uninstall it. I've tried uninstalling and the re-installing with no luck, and even restarting my system each time.
    Even from the CC dashboard, the icon does not launch it like it does for all of the other programs.
    Anyone have any ideas as to why and how I can get Premiere to work?

  • Not able to open program Premiere Pro CS6 trial

    Adobe Premiere Pro CS6 is not launching although software has been fully downloaded.
    There is no icon on desktop to allow you to open the program with.
    The program is located in the 'downloads folder'. Pls advise on how to open the program.  

    I Have th same problem ,
    I Run the installation through Adobe Download Assistance on my hard drive c:
    a directory created Adobe Premiere Pro CS6 , after this i run the install Set-up.exe , default installation directory was Program-Files / Adobe , i leave it as it was
    after installation complete 100% , there IS NO ICON ON DESKTOP , NO FOLDER ON PROGRAM FILES / ADOBE
    Is this a bug ? or this absolutely is A   B U G ?

  • Both the screen flickering after dual monitor setup in Premiere Pro CS6

    Hello,
    I recently installed Premiere Pro CS6 in my PC. Then after I set up dual monitor in the Preference, the screens of both the monitor started to flicker until I stop the playback. Previously I used same hardware with CS5 but there were no problem.
    Link to dxdiag text file :
    https://dl.dropbox.com/u/53681371/DxDiag.txt
    I have attached the screenshots of msinfo32 and my graphics drive info.

    Some ideas for a Desktop Video Editing PC
    http://www.adkvideoediting.com/
    -ADK Kudos http://forums.adobe.com/thread/877201
    Build http://forums.adobe.com/thread/878520?tstart=0
    -more build ideas http://ppbm6.com/Planning.html
    -Build it Yourself http://forums.adobe.com/thread/815798
    -http://www.shawnlam.ca/2012/premiere-pro-cs6-video-editing-computer-build/
    Laptop Video Editing PC http://forums.adobe.com/message/4578948

  • Premiere Pro CS6 with external HDMI monitor

    Hello all
    Is it possible to use an HDMI monitor as an external preview monitor when editing with Premiere Pro CS6?  If so, then how is it connected, and where can i find the correct tick box in
    Premiere Pro CS6?  I have an apple iMac (early 2009) intel core 2 Duo (if this is relevant).
    I need to be sure of the correct colour/look output, etc.
    Any advice would be greatfully received.
    Thanks
    Karl.

    Hi Ferret Head,
    Please go to premiere pro>preferences>playback
    and check the option for the second monitor under video device.
    Thanks

  • I have downloaded Premiere Pro CS6 on my work PC, but can't find it to open it anywhere. I can find other Creative Cloud programs I downloaded though.

    I have a one-year Creative Cloud subscription on my Mac, and I recently opened it on my work PC as well (as customer support told me I could do). I downloaded Photoshop, Indesign, and Bridge, and have successfully used them all on this PC, but I can't find Premiere Pro CS6 to open it though. Wondering if it's a problem with the computer, or if it's something that can be fixed/how to fix it.

    CS6 via the Cloud requires an extra step... did you do as described below?
    Previous via Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous

  • Premiere Pro CS6 playback freezes, regenerates .pek and .cfa files

    When I try to watch something in a sequence, the Program Monitor freezes. The playhead moves in the timeline as usual and the audio plays just fine, but the visual freezes. Sometimes it stops a few seconds after I start playing and sometimes the video never plays at all. When I stop playback, it remains frozen for a while, then resets to the frame the playhead is on.
    As I checked different options, I discovered Premiere is regenerating both the .pek and .cfa files every time I open it, even though all of my projects have already conformed. I have it set to store the media files with the project, so I know the preview files have not moved or been deleted. I work on this setup 8 hours a day, 5 days a week, and nothing changed since I was in yesterday. It was working fine when I shut it down last night, no one could have logged in while I was gone, and this morning it doesn't work. No updates were installed, no files were moved, no drives switched.
    I have searched the internet for help, but all of the forums I've found are at least two months old and recommend installing the 6.0.3 update. I did run updates for all my Adobe software, and it didn't help. I also deleted and re-rendered my peak and cfa files.
    One six-month-old forum said that Premiere CS6 cannot playback long AVCHD .m2ts files. Previously I had no problem working with .m2ts files 35 minutes and shorter, or with .mp4 files up to 75 minutes long. The video I'm currently working with is about 75 minutes long. And again, it was working fine yesterday.
    Further investigation revealed that playback does not freeze when I import a selection from the Source Monitor (vs. importing from the Bin and trimming in the Timeline) and do not layer clips or apply effects.
    Any thoughts?
    Thanks.
    Media Spec:
    File type: AVCHD Video
    Resolution: 1920x1080 (1080p), 29 fps
    Imported from camera hard drive using PlayMemories Home
    Computer Spec:
    Adobe Premiere Pro CS6
    Windows 7, 64-bit Service Pack 1
    Graphics card is Quadro 5000, driver 276.19
    OS/boot drive is a solid state 250gig, and files running off a 2TB local hard drive

    I've tried several more things.
    The playback does not freeze if I have only one clip in the timeline.
    If I have clips on two or more video tracks, it starts freezing.
    Once I clear it down to one video track, it takes a couple of seconds (up to 30) to start playing normally again.
    Sometimes I can play two tracks for several minutes before it freezes. Sometimes it freezes immediately.
    When I open Premiere, I get the "Media Pending" screen for way longer than usual.
    I have rebuilt the peak and cfa files, no difference. GPU accelerator is enabled. The latest Adobe updates are installed.
    I see a few other forums with similar problems but no solution.
    No settings, file formats, or file locations have changed since Monday (the last time CS6 was working properly). After a lot of digging around I found that a Windows Defender Definition update was installed the morning of the day PP started freaking out. I can't get rid of this update.
    I edit two or more hours of footage per day. They are lectures, so they are recorded in 1-3 hour chunks. I use two videos simultaneously--one with the professor's powerpoint presentation, and one of the professor. I keyframe the PPT video into the corner, overlaid over the lecturer. I did this for years without problem in CS5.5 and for two months without problem on my current setup.

  • Premiere Pro CS6 Constantly Crashing

    I am having the worst time using Premiere Pro CS6.  The program is constantly crashing, saying it has encountered a serious error and has to close.  This is happening during the most basic operations like scrubbing the timeline or pressing play.  I am using footage strait from my Canon 7D (h.264) with no effects or filters.  I have all the latest updates to the software and my computer.  No other programs are open during these errors.  I'm using a 2011 MacBook Pro i7 8GB RAM with AMD Radeon HD 6750M 1024 MB and OSX 10.7.4. 
    I wanted this to be an alternative to FCP 7, but so far it is not working out.
    Any ideas?

    Happening to me too. Constant "serious error" crashes, usually when I'm doing hardly anything at all. One project was working with just a couple images and it was particuarly awful. Like you, H264 footage are a common thread.
    I'm a Mac Pro 3,1 2x2.8GHz Quad-Core, 10.7.3 (will try updating), 8GB RAM, GTX285, 6.0.1 and CUDA 4.2.7. GPU Driver Version says 7.18.11 270.05.20f02.
    As it stands I can't get anything done. My experience w/ CS6 so far has been to finish one project (2 tracks of DV, one of H264) that was originally started in CS5, and I don't really remember having any problems. Software worked much better than CS5 actually. Tried another one from scratch, same setup, but I encountered the H264 media pending bug that's been reported elsewhere and had to give up, go back to CS5. Project I mentioned above, I could barely do anything w/o the program crashing. This fourth project, another 2 DV/1 H264, I haven't encountered any problems playing back the footage yet, but this is when the software because very unstable.
    My console is FULL of "invalid drawable" errors
    5/30/12 2:40:09.845 PM Adobe Premiere Pro CS6: invalid drawable
    5/30/12 2:40:09.846 PM Adobe Premiere Pro CS6: invalid drawable
    5/30/12 2:40:09.988 PM Adobe Premiere Pro CS6: invalid drawable
    5/30/12 2:40:09.993 PM Adobe Premiere Pro CS6: invalid drawable
    5/30/12 2:40:10.017 PM Adobe Premiere Pro CS6: NSAlert is being used from a background thread, which is not safe.  This is probably going to crash sometimes. Break on _NSAlertWarnUnsafeBackgroundThreadUsage to debug.  This will be logged only once.  This may break in the future.
    5/30/12 2:40:21.354 PM com.apple.launchd.peruser.502: ([0x0-0x5a05a].com.adobe.AdobePremierePro[603]) Exited: Terminated: 15
    5/30/12 2:40:23.049 PM com.apple.spindump: Premiere Pro [603] didn't gather enough samples to report (only 3 samples)
    5/30/12 2:40:26.594 PM [0x0-0x71071].com.adobe.AdobePremierePro: --- OpenGL Info ---
    5/30/12 2:40:26.600 PM Adobe Premiere Pro CS6: invalid drawable
    5/30/12 2:40:26.601 PM [0x0-0x71071].com.adobe.AdobePremierePro: Vendor: NVIDIA Corporation
    5/30/12 2:40:26.601 PM [0x0-0x71071].com.adobe.AdobePremierePro: Renderer: NVIDIA GeForce GTX 285 OpenGL Engine
    5/30/12 2:40:26.601 PM [0x0-0x71071].com.adobe.AdobePremierePro: OpenGL Version: 2.1 NVIDIA-7.18.11
    5/30/12 2:40:26.601 PM [0x0-0x71071].com.adobe.AdobePremierePro: GLSL Version: 1.20
    5/30/12 2:40:26.601 PM [0x0-0x71071].com.adobe.AdobePremierePro: Monitors: 2
    5/30/12 2:40:26.601 PM [0x0-0x71071].com.adobe.AdobePremierePro: Monitor 0 properties -
    5/30/12 2:40:26.601 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Size: (0, 0, 2560, 1600)
    5/30/12 2:40:26.601 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Max texture size: 8192
    5/30/12 2:40:26.601 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Supports non-power of two: 1
    5/30/12 2:40:26.613 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Shaders 444: 1
    5/30/12 2:40:26.613 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Shaders 422: 1
    5/30/12 2:40:26.613 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Shaders 420: 1
    5/30/12 2:40:26.646 PM Adobe Premiere Pro CS6: invalid drawable
    5/30/12 2:40:26.647 PM [0x0-0x71071].com.adobe.AdobePremierePro: Monitor 1 properties -
    5/30/12 2:40:26.647 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Size: (2560, 0, 1360, 768)
    5/30/12 2:40:26.647 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Max texture size: 8192
    5/30/12 2:40:26.647 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Supports non-power of two: 1
    5/30/12 2:40:26.652 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Shaders 444: 1
    5/30/12 2:40:26.652 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Shaders 422: 1
    5/30/12 2:40:26.652 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Shaders 420: 1
    5/30/12 2:40:26.660 PM [0x0-0x71071].com.adobe.AdobePremierePro: --- GPU Computation Info ---
    5/30/12 2:40:26.660 PM [0x0-0x71071].com.adobe.AdobePremierePro: Found 2 devices supporting GPU computation.
    5/30/12 2:40:26.660 PM [0x0-0x71071].com.adobe.AdobePremierePro: CUDA Device 0 -
    5/30/12 2:40:26.660 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Name: GeForce GTX 285
    5/30/12 2:40:26.660 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Capability: 1.3
    5/30/12 2:40:26.660 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Driver: 4.02
    5/30/12 2:40:26.660 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Total Video Memory: 1023MB
    5/30/12 2:40:26.661 PM [0x0-0x71071].com.adobe.AdobePremierePro: OpenCL Device 1 -
    5/30/12 2:40:26.661 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Name: GeForce GTX 285
    5/30/12 2:40:26.661 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Capability: 1.1
    5/30/12 2:40:26.661 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Driver: 1
    5/30/12 2:40:26.661 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Total Video Memory: 1024MB
    5/30/12 2:40:26.662 PM [0x0-0x71071].com.adobe.AdobePremierePro:    Not chosen because it did not match the named list of cards
    5/30/12 2:40:47.412 PM Adobe Premiere Pro CS6: GetDYLDEntryPointWithImage(/System/Library/Frameworks/AppKit.framework/Versions/Current/A ppKit,_NSCreateAppKitServicesMenu) failed.
    5/30/12 2:40:48.188 PM Adobe Premiere Pro CS6: invalid drawable
    5/30/12 2:40:48.198 PM Adobe Premiere Pro CS6: invalid drawable
    5/30/12 2:40:48.205 PM Adobe Premiere Pro CS6: invalid drawable

  • How do I get Premiere Pro CS6 off Creative Cloud?

    I have spent over 100 hours in Premiere Pro CS6 putting together four hours of complicated video (at least for me, a first timer) all with the end objective of producing two DVDs which I’ll replicate for the 100+ members of my son’s high school marching band.  So it came time to burn them to the DVD, make a menu, etc.
    Which brought me to the apparently complicated and confusing task of trying to first FIND – and then use – Encore.
    After reading many threads in multiple forums, it seemed what I needed to do was to download Premiere Pro CC, uninstall Premiere Pro CS6, leaving the box unchecked for Encore, and then use them together.
    I installed Premiere Pro CC. Opened a project apparently fine.
    Then realized that perhaps Encore was already available and accessible to me via CS6. So tried to open a project there…. and now none of my projects could open in CS6!!! I was getting the dreaded “Sequence not available” error message.
    I tried uninstalling CC just to see if that would fix it (since installing it seemed to cause the problem). Didn’t solve it.
    Then came upon an Adobe help page that seemed to imply if I uninstalled CS6, ran a cleaner utility, and then reinstalled it, it would likely fix it.
    So I uninstalled it.
    Then I went to Creative Cloud to download CS6... but I can’t find CS6 anywhere in Creative Cloud!!!! I got a "single-app" membershi to Creative Cloud in June of last year just for Premiere Pro. I never bought a DVD or anything so I THINK that's the only way I can re-install the program.
    Forget the nightmare of trying to figure out how to get Encore - I just want Premiere Pro back at this point. What the heck is a person supposed to do?

    John -
    Thanks for your patience in explaining the page number stuff to a "newbie."
    If I understood you correctly, was the ultimate URL you were suggesting I click on this one?
    http://tv.adobe.com/watch/davtechtable/using-premiere-pro-cc-encore-cs6-for-bluray-dvd-and -interactive-video-for-ipadatv-and-mobile-hd/
    If so..
    a) I already watched that due to finding it in another thread where I think you were the guy that posted it (thank you!)
    b) Those directions were in part why I uninstalled Premiere Pro CS6 in the first place
    c) That video does not address my problem: I can't find CS6 loaded in Creative Cloud
    However, your Indesign-related link DID address my problem. Thank you very much!!!

  • Premiere Pro CS6 stopped working, for one user profile

    So Premiere Pro CS6 wouldn't open today. Opened fine yesterday, and the days before that. The program didn't crash yesterday or close improperly. I just get the logo splash screen, but I don't see the usual text stream of applications starting up on it. After a long time I get a Windows message saying it can't open the program.
    - I used Bridge to update to the latest version. No help.
    - I made sure Quicktime was updated.
    - I cleared the preferences by moving the whole My Documents\Adobe\Premiere Pro\6.0 folder somewhere else (as a backup). Next time I tried starting the program it created a new \6.0 folder but that's as far as it went.
    - I deleted AppData\Roaming\Adobe\Adobe Premiere Pro. Starting the program recreated the folder, made a Trace Database file but only put two entries in it:
         DynamicLink     1     5
         FE.WinInit.LocPlugins 1     5
    And then it stops there. No other files created.
    - Tried starting the program holding the Shift Key, and again with the Alt key, and again with both. No change.
    - Rebooted after every change.
    I tried logging out as the video user account and logging in with my personal account, and then Premier Pro opened just fine.
    Problem is, I need it to work on the video user account because it was created specifically for our video editing PC. Our company logins also tie into our email and other programs. This one was created specifically so more than one person could share Premiere Pro settings and resources, and there was a battle with our IT to get it because they despise generic accounts.
    I've seen other threads here mentioning startup problems but the solutions listed there don't work for me. Manually trashing the \6.0 folder didn't help. I don't have a .pref file or Preferences folder other than the \6.0 one. I haven't made any changes to the PC. The video drivers must be OK or it wouldn't start under the other user account. How do I fix this one?

    This was Microsoft patch week... did you install Windows updates?
    •What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    •What is your exact graphics adapter driver version?
    •Have you gone to the vendor web site to check for a newer driver?
    •For Windows, do NOT rely on Windows Update to have current driver information
    •-you need to go direct to the vendor web site and check updates for yourself
    •ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    •nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Maybe you are looking for