Two Step Confirmation Transfer Order with Radiofrquency

Friends & Gurus.
Can I use 2 step confirmation with RF? Which transaction should I use? I can do it with regular SAP transactions, but as soon as I do it with RF transactions both Pick and Transfer are confirmed.
Thanks.
Solved, yes you can.
Edited by: albertiosis on Oct 3, 2008 2:48 PM

Hello Abhay Desai,
Please kindly refer to SAP Library which has provided the following documentation on 2-step picking:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/f83e4d4afa11d182b90000e829fbfe/frameset.htm
I would suggest you to go through the prerequisites and steps in 2-steps pikcing in the given documentation. You should also be able to access to above with the following path:
http://help.sap.com >> SAP Library
  --> SAP ERP Central Component
       --> Logistics
            --> Logistic Execution
                 --> Warehouse Management System
                      --> Goods Issue
                           --> Two Step Picking.
Hope the above helps. If question answered, please close and reward points. Otherwise feel free to get back.

Similar Messages

  • Exit to confirm transfer order with a storage unit number

    hi guys,
    I want to confirm transfer order with a storage unit number  from LT06 transaction, somebody know a user exit? .. actuallly i am using  MWMTO004 (EXIT_SAPLL03A_005)  but it doesn´t confirm the transfer order, How can i solve it? give me suggestions.
    Thanks in advance.
    Marisol.
    Edited by: Marisol on Apr 28, 2010 7:40 PM

    I solved  the problem myself.
    Thanks.

  • Two-step confirmation of Transfer order in WM

    Hi
    We are confirguring 2 step confirmation.
    We have activated 2step conf, for the warehouse & marked corfirmation mandatory for the storage types,
    However we are not able to perform confirmation for Pick & Transfer step.
    Please let us know  on how to configure two step confirmation.
    Thanks,

    Hello Abhay Desai,
    Please kindly refer to SAP Library which has provided the following documentation on 2-step picking:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/f83e4d4afa11d182b90000e829fbfe/frameset.htm
    I would suggest you to go through the prerequisites and steps in 2-steps pikcing in the given documentation. You should also be able to access to above with the following path:
    http://help.sap.com >> SAP Library
      --> SAP ERP Central Component
           --> Logistics
                --> Logistic Execution
                     --> Warehouse Management System
                          --> Goods Issue
                               --> Two Step Picking.
    Hope the above helps. If question answered, please close and reward points. Otherwise feel free to get back.

  • Two step confirmation with RF device (Mobile Data Entry) - 1st step only

    Hello
    I want to implement the following scenario:
    - WM transfer orders are created, relevant for two step confirmation;
    - a user working with RF device confirms the 1st step - picking;
    - then the materials are transported physically to another building (the same warehouse number);
    - another user working with RF device confirms the 2nd step - putaway.
    For confirming the 1st step I tried to use standard transaction LM07. Confirmation of the 1st step is working fine but right after that a screen for confirming the 2nd step is displayed to the user. I would like this transaction to finish just after confirming the 1st step and not to proceed with the 2nd step immediately - because the confirmation of the 2nd step should be done by another user (with some other transaction).
    What is more: if you exit the transaction manually after confirming the 1st step the system saves the TO number (in table LRF_WKQU) and in some circumstances triggers the screen for confirming the 2nd step even if you do not run LM07 - this is so called "recovery" function which is a nuisance in my case.
    So my question is: is there a way to customize LM07 so that it finished processing automatically right after confirming the 1st step for a two step confirmation TO ? (and without storing data for "recovery" function). Or maybe some other mobile-data-entry transaction should be used for that ?
    regards

    Hi Vlad,
    One more information, which i would like to communicate on this issue.
    We have raised OSS message to SAP on this issue. They have replied back that, on screen 1302, we have some custom code which is interfering with the system behavior.
    As of now, we have analyzed at our end, and we found that, the enhancement at screen 1302 is restricted for the functionality, and in theory, this enhancement should not be effecting at all the system behavior.
    SAP has suggested to test the scenario , without any enhancement on screen 1302.
    Still we are in discussion with SAP, and try to find out the resolution.
    Can you also check in your system, if you have any enhancement on screen 1302 ? And if yes, does it interfering with the stander SAP codes.
    Thanks & Regards,
    Raj.

  • Transfer Orders with Header and Item confirmations inconsistencies.

    Hi,
    Is it possible to confirm Transfer order at Item level instead of Header level. I have a requirement i.e. Table level LTAK table Header level confirmation should be blank and Item level LTAP confirmation should be "X".
    Could you please suggest me?
    Thank you & Regards
    Srinivas

    Hi Rahul,
    Thank you for your response.
    Can you please explain elaborately. For single item delivery i need to create a Transfer order and confirm Transfer order at Item level instead of Header level. When  I am confirming it is updating in LTAK & LTAP tables. Can you please explain do i need to maintain any prerequisite in configuration?
    Thank you & Regards
    Srinivas

  • WM - Two step confirmation cancellation

    Hi Gurus,
    I am using the two step confirmation for transfer order in one of my business process (no 2 step picking).
    This is a necessary requirement from my client, but I have a little issue with the cancellation. Once the first step is confirmed, all the cancellation transactions issue the error message #L3355.
    Physically, the forklift driver should be able to confirm the first step of picking, and also to cancel this first step. However, there seems not to be a standard transaction to cover this "normal" requirement.
    Does anyone has an idea on how this process could be carried out in the system ?
    Thanks in advance.
    Best Regards,
    Remi

    If you check the code in...
    include: ML03TF90_STORNO_PRUEFEN
    form: STORNO_PRUEFEN
    ...you will see that this is the standard behaviour of the system. SAP online help also says:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f83e744afa11d182b90000e829fbfe/frameset.htm
    If a transfer order has already been confirmed, the only way to change a goods movement to restore the original stock situation is to create a new transfer order.
    So, in standard system you have to create a new TO or you have to go to development / modification of standard code.
    (one )
    Edited by: Csaba Szommer on Apr 6, 2011 6:35 PM

  • TO two step confirmation - return transfers

    Hello,
    I have set two step confirmation for OT and everything seems ok. I used LT1D for the picking confirmation and LT1E for positioning confirmation. The problems is when in the OT there is a return transfer to a storage type. For example
    200 picked from strorage type A
    100 positioned in storage type B
    100 positioned in storage type R
    R is the return storage type (set in customizing for the A storage type in picking strategy section)
    In this case the two step confirmation doesn't work. SAP gives the message that two step confirmation is not allowed. I can only confirm with LT12 that is in a single step.
    I haven't found any SAP notes for this topic, can someone help me please?
    Thank you very much.
    Bye Bye,
    Andrea

    Hi Vlad,
    One more information, which i would like to communicate on this issue.
    We have raised OSS message to SAP on this issue. They have replied back that, on screen 1302, we have some custom code which is interfering with the system behavior.
    As of now, we have analyzed at our end, and we found that, the enhancement at screen 1302 is restricted for the functionality, and in theory, this enhancement should not be effecting at all the system behavior.
    SAP has suggested to test the scenario , without any enhancement on screen 1302.
    Still we are in discussion with SAP, and try to find out the resolution.
    Can you also check in your system, if you have any enhancement on screen 1302 ? And if yes, does it interfering with the stander SAP codes.
    Thanks & Regards,
    Raj.

  • LE-TRM: Two-step confirmation

    Dear all,
    Could you please provide a link to a SAP documentation which stipulates that Two-step confirmation settings (SPRO > Logistics Execution > Warehouse Management > Activities > Confirmation > Confirmation control for Warehouse number / Storage type / Movement type) are mandatory in order to have TRM tasks created?
    Thx a lot in advance

    Hi Sandeepan,
    Can you please check the two settings in tcode OMLX (Path:IMG u2192 Logistics Execution u2192 Warehouse Management u2192 Activities u2192Confirmation) The first of these is the requirement to confirm the pick and placement of a transfer order separately and the second is the requirement to confirm placement and removal of stock into and out of a storage type. For the second setting, by default, the requirement to confirm is switched off in interim storage types.
    Other than above setting you need to check which mode is considered to find the rout till destination bin of the TO.
    Hope this will help.
    Regards,
    Sudhir

  • Intercompany Stock transfer order with excise

    Hi,
    Can anyone  tell me about Intercompany Stock transfer order with excise step by step.
    hoping to replu

    Hello,
    Create Stock Transport Order - ME21N
    Create Delivery Challan (DC) - VL10B (this reduces the inventory from supplying plant)
    Create Excise Invoice refering the DC created above - J1IS - Ref document type OTHR (Excise values are transfered in this step)
    Do goods receipt against the DC (outbound delivery) - MIGO in receiving plant. Also capture and post the excise invoice cerated in J1IS.
    Regards
    Mahesh Naik

  • HU Identification error at the time of confirming Transfer order

    Hi Guys
    While confirming the Transfer order with respect to Outbound delivery
    We are getting this error
    Source storage unit we have provided is as per our naming convention : sea07+701
    But it is giving this error :Enter a storage unit
    HU identification field it is pointiong the cursor
    CAn any body solve and suggest a solution?????????
    Message no. L3216

    Hi,
    You need to enter the destination SU number as well. There is customizing in the storage type as well as the mvt to decide how the destination SU / HU needs to be determined (either copy source or take pick HU as destination HU for example).
    MZ

  • Confirming transfer order for nested handling units (picking and shipping)

    Hi
    My shipping location is HU + WM, I understand we cannot "auto confirm" Transfer Orders during creation from an outbound delivery (LT03) in the case of nested HUs because the system wants to know which exact box HUs ( The TO only specifies the pallet HU...storage unit)
    I have an automatic Pick HU created during TO confirmation but the system still prompts for me to enter  box HUs that need to be shipped/repacked on LT12. This makes logical sense but is slowing down our shipping process. Since we do not put HU labels on our boxes, the picker has to go into HUMO, enter the pallet HU, retrieve the box HUs and finally enter some of those on the TO confirmation screen to match the open quantity. In reality we don't really care what HUs he picks as long as he picks from the right pallet.
    Is there any way to automate this? If the system can pick box HUs sequentially, randomly or create further pick HUs. Anything but doesnt ask the picker to put in the box HU numbers
    OR
    Is there a way to auto confirm TOs during creation
    OR
    Is there any way to putaway box level HUs into the warehouse at the end of the production line so that Storage Unit is the box HU number and not the pallet HU number, that way it wouldn't prompt me for box HUs during picking.
    I would really appreciate your help.

    This is the standard SAP for picking nested handling units.  You can do some more reading on this by accessing the SAP note 829266.
    We had a similar problem with nested handling units - what we ended up doing was writing a BDC program that would take the nested handling unit and pack it back onto that HU instead of the pick HU after TO confirmation was done in the delivery. 
    In order to get your TO to automatically confirm, check the configuration for the storage type that its picking from - look to see if "Storage Type requires confirmation for removal/placement" is checked. 
    You can als ocheck the movement type configuration for Propose Confirmation.

  • Two step confirmation for warehouse tasks in EWM

    Hello everybody,
    I am working on an internal prototyp to evaluate SAP EWM. Therefore it is essential that we use "two step confirmation" for warehouse tasks. Step one: confirm pick up of a pallet; Step two: confirm transportation of a pallet. Like it is used in SAP WM (Parameter I_QUKNZ in function module L_TO_CONFIRM and in standard SAP).
    I haven't found anything similar to that in EWM so far. I searched in the official EWM SAP Press book and also in google. But right no I don't have any idea.
    Do you guys have any hints on how to achieve two step confirmation somehow?
    Many thanks in advance!
    Stef

    Hi Jürgen.
    Thanks for your input! You are right, it works with RF!
    But it works kind of strange. Deleting source storage bin, creating another position etc.
    I will have a look how to adapt this.
    Thanks!

  • Two step confirmation in Warehouse

    Hi All,
    Two step confirmation (We can use this indicator to define whether confirmation of the withdrawal of materials from a storage bin and arrival of materials at the target storage bin is allowed in the warehouse in two steps) indicator has been set for my warehouse.
    As the two step confirmation is becoming heavy for the warehouse team, that need to be changed as a single step confirmation.
    Will there be any impact on open TOs if i change this from two step to single step confirmation. Will there be any other impacts on warehouse environment.
    Rgds
    Raul

    My suspicion would be that the configuration settings are referenced during TO creation and that TOs are then 'locked' with these settings.  So the impact would not be significant, all existing TOs, just created or part processed would need to be completed using 2-step and that new ones would be single step.
    Why not just trial it in your development system. Possibly all TOs just become single confirmation and the pick confirmation for existing TOs, where that has happened, becomes irrelevant.
    Regards,
    Nick
    Edited by: Nick Whitehurst on May 21, 2010 3:30 PM

  • LT45 (Picking Progress) and Two Step Confirmation

    Dear all,
    I have Two Step confirmation in place for one WM movement type and I am happy with it.
    We also use Multiple Processing for Deliveries. As a result, the Groups created by this process are used to monitor the Picking Progress in LT45
    In LT22 or LT24 there is clear distinction between Open TO's, Confirmed TO's and half Conirmed TO's (yellow triangle.
    Much to my disappointment I cannot see such a distinction in LT45.
    Is there a way or another Monitor available that does show me the different statusses? A yellow bar if the group is half confirmed is too much to ask, but an alternative would be nice.
    Thanks!
    Sandeep

    Ananthram,
    Thanks for reading my Question.
    I am talking about TO's that use Two-step Confirmation. In LT22 / LT24 they show as Yellow Triangle, as you know this means half confirmed.
    As you know in LL01 they don't show as yellow but as red, just like in LT45. So this is very misleading.
    Can you tell me a place where I can clearly monitor my Picking Progress and see a distinction between Green, Yellow and Red
    (Confirmed, Half confirmed, Open)
    Thanks again for taking the time.
    Sandeep

  • Two step confirmation

    Hi All
    Do we have any thing like two step confirmation in Warehouse Management.
    Thanking you
    With Rgds
    Vinod

    Yes it's a terminology where the stock removal and putaway requires two separate confirmation. You can have a look in T-code OMLX and click on Mvt Type button for more info.
    Amit

Maybe you are looking for