Two step process of creating G/l

Hi,
Please advise what is two step process of creating a g/l. i know creating it through fs00. but there is another way of creating ti thru company code and chart of accounts. CAn anybody help me?

Hi
FS00 is to create GL account Centrally. Using this transaction you will be able to create the account in 1 step.
The 2 step approach is to use transaction FSP0 to create at chart of account level. Then use transaction FSS0 to create at company code level.
Regards.

Similar Messages

Stock Transfer Order two step process

Hi!
we are following stock transfer order in two step process along with WM
we are using movement types 641 & 101.
Now our client rerquiement is : when goods issue is posting in supply plant ( movement type 641), the accounting entry should be Goods in Transit A/C dr TO Stock Account Cr.
when goods receipt is posting in receiving plant the accounting entry should be : Stock Account a/c dr to Goods in Transit A/C, if there are price differences it will be posted to price difference accounts ( both have price control "S").
how can we acheive this.
Now only at the time of 641 or 101 we posting the accounting document as: Stock A/C dr ( receiving plant) to Stock A/C Cr ( issuing plant) and price difference.
regs,
ramesh

we can a report in MB5T, but there you cannot find value of the stock, only quantity of stock, as in STO, there will not be any price, that is the problem.
regs,
ramesh

What is the step by step process to create a table in data dictionary?

hi,
What is the step by step process to create a table in data dictionary?
regards.

sorry, question resolved.

POSDM Diff Between : One Step and Two Step Processing Tasks

Hi All,
Can you pl give some points on difference between "One Step and Two Step Processing Tasks in POSDM ??
Thanks!!

Please consult the SAP Note 980272 on the service marketplace. It gives a detailed description of the difference.

Need step by step process for creating remote cube

Hi,
I already have a cube from business content, getting data from an ODS, which gets data from the info source,
However we need to model a remote cube in the similar line, that is create the remote cube from the infor source above.
I need a step by step process for creating a remore cube,
Thanks for your help in advance,
Arunava

hi
check this link
Creating a SAP RemoteCube
Prerequisites
·        Direct access must be permitted for the DataSource (in the DataSource maintenance).
·        This DataSource from the sources system was assigned to the InfoSource.
·        You must have defined and activated the transfer rules for this combination. Note the peculiarities of transfer routines:
¡        You need to explicitly select the fields of the transfer structure that you want to use in the routine. See also Creating Transfer Routines.
¡        If you have created a transfer routine, you can create an Inversion Routine for performance optimization.
¡        If you use a formula then the selections in this field cannot be transferred. We recommend using a transfer routine instead.
·        In BW, a source system ID was created for the source system To do this choose Tools ® Assignment of Source System to Source System ID in the main menu.
Procedure
       1.      Choose the InfoSource tree or InfoProvider tree in the Administrator Workbench under Modeling.
       2.      In the context menu, choose Create InfoCube.
       3.      Select SAP RemoteCube as InfoCube type and enter your InfoSource.
       4.      You can define if a unique source system is assigned to the InfoCube using an indicator. Otherwise you must select the source system in the relevant query. In this case the characteristic (0LOGSYS) is added to the InfoCube definition.
See also Characteristic Compounding with Source System ID.
       5.      In the next screen you can check the defined SAP RemoteCube and adjust it if necessary before activation.
       6.      You can then assign source systems to the SAP RemoteCube. To do this, choose Assign Source System from the context menu in your SAP RemoteCube. In the dialog box that follows, choose one or several source systems and select Save Assignments.
The source system assignments are local to the system and are not transported.
Result
The SAP RemoteCube can be used in reporting in cases where it does not differ from other InfoProviders.

Step by step process to create domain name and active directory in windows 7 64 bit

Step by step process to create domain and active directory in windows 7 64 bit
I work in an organization
I want to create a domain name SBBYDP and make it server for other computers
I want that, all users’ have a personal account while they use any computer from this organization, even they use any computer from this network they use their own account to login to network.
And this may be in Active directory option.
I installed windows 7 professional edition 64 bit
Can any person help me? Step by step process, I always thanks full all of you

Hi,
You must use the Windows Server platform system for the AD service, you can refer the following KB first:
Active Directory
http://technet.microsoft.com/en-us/library/bb742424.aspx
AD DS Deployment Guide
http://technet.microsoft.com/zh-cn/library/cc753963(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

TRIGGERING IDOCs IN TWO STEP PROCESSING POSDM ?

Hello Experts,
Could you please explain me why the two step processing is used in POSDM? Is it due to better performace?
And also how the IMG configuration is handled? Once the aggregate tasks are processed how do we TRIGGER THE IDOCS?
Thanks,
Alex

Hi,
You trigger the IDoc creation via transaction /POSDW/ODIS.
The reason for the 2 step processing a quite a lot. One example is performance. In a 2 step scenario you can trickle tha data during the day and add them to an aggregate as they come into POS DM. At the end of the day you only need to trigger the second step which is simply moving the data fromt the aggregate to an interface.
Furthermore it is much easier to trace the data flow as you can see what line items went into which aggregate and which aggregate has been pushed into which idoc.
Regards Carsten

Upgrade to 7.3 in a two step process

while upgrading from 7.0 to 7.3, we are using a two step approach:
1. Upgrade to EHP1 from BW7.0
2. Upgrade to 7.3 from EHP1
We are doing this as our current SAP BI system is on BI7.0 SP 14. My question is should we do a post check after we move to EHP1 or can i wait to move to 7.3 and then do a complete system scan then?

Hi Vasavi,
Suggestion will be to do basic Post upgrade Checks after EHP1 Upgrade. I am not sure to which SP level you are planning to upgrade (SP06 , 07 or 08). But doing these Post upgrade Checks & correcting issues at that time would ensure you do not end up in big list of issues once u upgrade to BW 7.3.
When we upgraded to EHP1 SP04 initially, we faced certain issues like DSO load getting failed, Process Chain Issue, Broadcasting issues etc. So for better Issue management perspective, my suggestion will be to do Post upgrade checks after EHP1 upgrade as well.
Thanks
Swapnil

One job with two steps - how to create one single spool?

Hello experts,
I have created two queries in SQVI. One is based on the table BSIK, the other on on BSAK.
The report layout is the same in both queries.
Now I schedule one job in SM36/SM37 with two steps corresponding to my queries.
I want my second step to append the spool created in the first step. Is that possible?
In order to do this I unchecked "New spool request" in the request attributes for the second step of the job.
I use the same printer, the same format (X_65_80), but it doesnt work.
The help on the field says
".... name, output device, number of prints and the format must match..." - What "name" do they mean?
"In addition, the existent spool order must not already be competed. This can occur if a spool is released for output...." - I use "send to SAP spooler only" option, is that what thay mean? How cen you have an "uncompleted spool" in the job.
If anybody knows ho to do this (without development!), please advise
Best regards,
Fatima

Hi,
Please do following steps :
1. Go to transaction code SM36
2. Do as per below screen shots
You can see Job steps is empty
Click on (Check and Save)
Next Screen
You can see one step created
Click on Create
You can see above it is showing as Step 2
Give again program name and variant
Click on (Check and Save)
You can see two steps are created
Go back (green arrow)
You can see know SAP is showing 2 Step(s) successfully defined which was earlier blank
Click on
Next Screen
Now schedule job as per your requirement.
Prerequisite create variants for both the programs as we need to mention the same .
Hope, this solves your issue else revert.
Regards,
Tejas

Is creating a ringtone a Two step process?

i have a new Iphone 3GS and I want to create ringtones for it. It appears that you have to buy the song and downlad it first for say $.99 and then once it is in YOUR library, you then can create a ringtone from it, which then costs you *another* $.99. is this correct, or is there a way to pick the song and create a ringtone from it in one step for just one fee?
Thank You

OrangeMarlin, You do NOT need a Mac to make free ringtones. Use this guide:
http://www.intomobile.com/2008/10/07/iphone-ringtones-create-free-iphone-rington es-using-itunes-8.html
You can make ringtones out of ANY song for FREE. It is safe and simply a way of converting the .m4a audio to a .m4r ringtone... I've done this many times. lol.

HANDLING UNIT IN STO TWO STEP PROCESS

Hi sap experts i have problem with handling unit so i need experts help.
The problems goes like this see i am doing Stock trasport order i have enter quantity and attached handling units and the PGI.And after that i am doing GR via Handling unit and i am posting stock.After that if i use HU system giving me error message that HU are in traasit and i can't use them.
For this SAP notes says we have to maintain output type SPED for shipping for delivery type and i did ,for this system creates inbound delivery here also i am facing problem that is process log it show that error during copy partner :partner role and message no is vl864.and its giving another errr message that is No inbound delivery is created for replishment delivery no.
So sap experts i need your help in this issue as this issue very high priority so i hope i get favourable response.Thanks alot

Thanks alot

I am running 6.1 and want to upgrade to 7.1 then to 10.1. I understand this is a two step process and can find where to upgrade from 7.1 to 10.1 but cannot find 6.1 to 7.1. Can anyone head me in the right direction?

Where can I find the pathway to upgrade my 6.1 iMac to the Lion 7.1 and then to the Montian Lion 10.1. I think I have to update to Lion before I can update to montian Lion but cannot find the upgrade to take me from 6.1 to 7.1

What are we talking about here? You've posted in a Windows forum, but seems you are referring to an iMac. But you are not referring to OS X version numbers. Maybe you should make clear what you want.

Oracle report 'XML Report Publisher' error 2 step process

We're getting error 'Invalid UTF8 encoding' when running the above report. This is a second step of the two step process when creating XML output in Oracle Apps. The first step is report 'PO Output for Communication'. This one error out with the following warning:
Beginning post-processing of request 4487540 on node TYBU093047 at 07-OCT-2008 12:49:17.
Post-processing of request 4487540 failed at 07-OCT-2008 12:49:17 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Any information on this is greatly appreciated.
Edited by: user1733606 on Oct 7, 2008 11:27 AM

review this
http://solutionbeacon.blogspot.com/2007/07/simple-tutorial-for-publishing-fsg.html

Retrieving Automate Batch processes I created in Photoshop CC before updating to Photoshop CC 2014

I used Photoshop CC this afternoon and created a couple of batch processes. This evening I had to update CC and the result was that when I opened Photoshop CC 2014 the two batch processes I created were not there. Is there a way to import them and from where?

Moving the discussion to Photoshop General Discussion.
Thanks,
Atul Saini

Processing a Two-Step Group in parts

Dear all,
I am processing my Two step group with LT0e and would like to process it partially.
Is there a way to do that?
Some background: When Picking from one of the Storage Types I want to use a Return Storage Type. Since this applies to one Outbound flow only, I have defined the Return Storage Type in my WM movement, NOT in the Pick Storage Type.
In 2-step customizing, I have omitted the movement type, and am entering the Movement Type myself in LT0e. Only thing, I want to be able to make some kind of selection here so with my Movement Type I process only those items from the One Storage Type I am focussing on.
To much info?
Again, thank you for your time.
Sandeep

In LT0E once you have selected your group and via subsequent function do the picking step(2step picking -> start picking), you should be able to make the lines which you dont require "Inactive". Then you have only those lines for which you want to do the picking with your required movement type.
Sandeepan

Two step process of creating G/l

Similar Messages

Maybe you are looking for