Two T61's - connected, yet not resolving - other computers do
Hello All,
We have two identical T61's that suddenly stopped (even though connected to the wireless router both wirelessly and hard wired) resolving to anything on the Internet, including email client activity, etc. Anoher older R52, which I am sending this on is connected the same way and works fine - any ideas?
H. Amina
Hi hamina, welcome to the Lenovo user forums!
To help you with this one the community will need a bit more information.
For example, tell us what you see when they are "stopped", the OS you are using, machine type, whether you are using Access Connections or a firewall, and any other information you think might be relevant.
I don't work for Lenovo. I'm a crazy volunteer!
Similar Messages
-
Connected, yet not connected?
ISP: Windstream
Router: Linksys WRT54G2
Laptop: HP Pavilion (Vista SP1)
I have a fiberoptic connection. So no modem, the desktop is hard-wired to the Linksys router. The desktop connects fine, I have no trouble there; the laptop was the same way, until yesterday, it just went dead on me. It says successful connection, yet I am not able to browse the internet.
I was on the phone with HP, Windstream & even Linksys and I did everything they asked. The cause might be something simple, but so far it seems too complicated to figure out, let alone fix.
A list of things I have already attempted:
*I have disabled IPv6, only IPv4 is enabled.
*I reset the router multiple times
*I also tried to change the ip to 10.10.10.1 in the Linksys Setup
*I tried did the DhcpConnBcastFlag fix
Below are the nbtstat & IPCONFIG for Desktop (hardwired) & Linksys (Wireless, while connected to the network)
Local Area Connection:
Node IpAddress: [192.168.1.100] Scope Id: []
NetBIOS Local Name Table
Name Type Status
RAGHUVEER <00> UNIQUE Registered
RAGHUVEER <20> UNIQUE Registered
DESKTOP <00> GROUP Registered
DESKTOP <1E> GROUP Registered DESKTOP <1D> UNIQUE Registered
..__MSBROWSE__.<01> GROUP Registered
ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : RaGHUVeeR
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast Ethernet NIC
Physical Address. . . . . . . . . : 00-11-2F-1C-83-59
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.100
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
Lease Obtained. . . . . . . . . . : Thursday, November 13, 2008 2:33:25PM
Lease Expires . . . . . . . . . . : Friday, November 14, 2008 2:33:25 PM
PPP adapter Windstream:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-53-45-00-00-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 98.20.77.213
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 98.20.77.213
DNS Servers . . . . . . . . . . . : 166.102.165.11
166.102.165.13
NetBIOS over Tcpip. . . . . . . . : Disabled
((Now the laptop))
Local Area Connection:
Node IpAddress: [0.0.0.0] Scope Id: []
No names in cache
Wireless Network Connection:
Node IpAddress: [192.168.1.102] Scope Id: []
NetBIOS Local Name Table
Name Type Status
LAPTOP <00> UNIQUE Registered
WORKGROUP <00> GROUP Registered
WORKGROUP <1E> GROUP Registered
WORKGROUP <1D> UNIQUE Registered
..__MSBROWSE__.<01> GROUP Registered
ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller
Physical Address. . . . . . . . . : 00-1D-72-5E-7F-B2
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom 802.11b/g WLAN
Physical Address. . . . . . . . . : 00-21-00-26-AA-10
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.1.102(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Thursday, November 13, 2008 12:46:46 PM
Lease Expires . . . . . . . . . . : Friday, November 14, 2008 12:46:46 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 7:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.{EFFD3AB7-3199-43DB-863A-36666D23B
A33}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 6:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.{D07B0651-BF9C-4166-AFB1-5E1ABEC8B
B9D}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 16:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 6TO4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Help from here is my last hope, and honestly, ANY help is appreciated.Remove the prefered networks from wireless computer and try to reconnect to the network .
-
Can not print to printer connected to airport via other computers.
I have recently purchased an Airport Express base station. I have connected to my company network in my office, to access network, internet and my printer wirelessly as well as broadcast my iTunes audio. I have managed most but fail the most important.
I can access to internet, broadcast my music, print wirelessly.
But I can not access to files and other computers within our company network (a windows network)
Also by connecting my printer to airport, other wired users can not access to my printer, but they should.
Please help me to resolve these issues.Hello KUT,
Have the windows users download and install the wonderful Bonjour for Windows!
http://www.apple.com/support/downloads/bonjourforwindows.html
They will be able to use the printer connected to the airport. As for file sharing, this is a much harder task, only due to the nature of the PC's. I recommend reading :
http://docs.info.apple.com/article.html?artnum=106461
Good Luck,
Cowsweat -
IBook not connecting to AirPort Express, other computers work
I have not been able to connect our iBook to Airport Express, however our two other computers are able to access the network. I can connect to the network however I am not able to surf the web on the iBook. Oddly, if we take the iBook elsewhere - like a coffee shop - it can connect.
I did a hard re-set of the Airport (paperclip while plugging in). The iBook can see the base station within the Airport setup utility but is unable to connect. Our other computers can still access the new Apple jf83j39 network.
Suggestions?Welcome to the discussions forums blajer.
Well, that is really weird.
Try creating a new location:
Choose Apple menu > System Preferences, and click Network.
Choose Edit Locations from the Location pop-up menu, and then click Add .
For each network connection setting, enter the same settings that your other computers are using. For example, click TCP/IP > configure IPv4 "using DHCP" etc. DNS > Make sure the DNS Server(s) fields are empty or are in greyed-out type. Try turning OFF IPv4.
Click Apply and wait a moment. Does anything change? What does your IPv4 address show now? -
When connecting to server the other computers will not mount on the desktop
Hello
I have three computers connected wireless and ethernet. When connecting to the imac and mac pro with my macbook pro the other computers will not mount on the desktop. I have never had a problem like this before.
The imac and mac pro will mount the laptop or imac and the imac will mount the mac pro and laptop.
When I connect to the server with the laptop I can access everything thru the shared folders but nothing will mount on the laptop desktop using the, connect to server.
External HD connected with firewire will mount and the internal cd/dvd will mount.
I have ran permissions repair on the laptop. Have I accidently changed some configuration I am not aware of?
Any help or advice is greatly appreciated
Thank You
DickDick,
I know this sounds silly but while in Finder goto (Finder)/(Preferences) and then make sure your on the (General) tab, make sure all the things you want to show are checked.
If that doesn't help move the com.apple.finder.plist to the desktop you can find in in ~/Library/Preferences ( ~ = Your Home Folder), log out/log in, and see if that fixes the problem if not go ahead and move the plist file back.
hope that helps,
Weston -
I cannot get this macbook pro to connect to ebay. Other apple computers in my house on same network will but this one will not. This one will connect to any other site, but not ebay. Thoiguhts?
Try using OpenDNS servers:
System Preferences>Network>Advanced>DNS.
Click on the + in the left side column and add the following:
208.67.222.222
208.67.220.220
Click OK, then click Apply
BTW one post is sufficient. Two clogs the servers. -
EMac won't connect to internet, but other computers will?
So I've got this problem with my eMac.
I've been trying to get it to connect to the internet through my cable modem, and it hasn't worked yet. However, all my other computers (including the vista x64 laptop I'm typing this on right now) connect within 3 seconds of being plugged in.
I've tried plugging the eMac into the both hubs, even plugging it directly into my cable modem, and it still generates some weird IP (169.254.130.32, subnet 255.255.0.0) which isn't even close to right.
I tried manually inputting the same IP/subnet/gateway info from my laptop, and it still wouldn't connect.
Any ideas?Hi AttackBadger, and a warm welcome to the forums!
Any 169.254.x.x addy means it's not being dealt an IP from any DHCP device.
I tried manually inputting the same IP/subnet/gateway info from my laptop, and it still wouldn't connect.
You'd have to use a different IP than any other on the Network, but same Mask & Router.
even plugging it directly into my cable modem, and it still generates some weird IP (169.254.130.32
For that to work since Modems only talk to the last device since powering up, you'd need to power down everything, wait 5 minutes, power up the Modem, wait 2 minutes, power up the eMac.
Does this Ethernet cable work on other computers?
The Interface that connects to the Internet, needs to be drug to the top of Network>Show:>Network Port Configurations and checked ON. -
G5 No longer connecting to airport and other computers on network
My G5 dual 2.0 (mid 1994) was connecting to the internet through airport extreme base station until Saturday. I had upgraded it to leopard (archive & Install) then up to 10.5.1 last week and all was good. After bootup today it doesn't see any other computers on the network and it doesn't get email and doesn't access the web. When I check network settings I notice that WPA Personal is selected but not WPA2, so I tried to change that but it didn't seem to change after applying after a restart. Then I checked to see if DHCP setting were configured. This is where things seem odd, I can't renew the DHCP lease like I can on my MacBook Pro (running current version of tiger) that I am typing this with. I tried to make a new airport connection, tried using a different account, checked system profiler (sees card and all), but no connection to email or internet. Is there a firewall configuration that I need to set differently? Also, verified permissions. Is there something else that needs to be done or is there a ugly bug stopping the show?
i had the same problem after installing leopard on my macbook. it would not connect to the internet! i called applecare today and actually got someone who knew how to help me. he said that you have to reset the parameters whatever that means! and this is how you do it:
1 - turn off your computer
2 - turn on computer and immediately hold down these four buttons simultaneously: Option Key, Apple Key, P, R - then when you hear the second "ding" , LET GO OF THE FOUR BUTTONS.
i did it and the macbook is connecting to the internet just fine. i hope this helps!!!!!!!! -
Airport and ethernet not working other computers are
I have a Mac Mini that I use daily. Today when I tried to get onto the internet the bars for airport in the menu bar were gone and a caution exclamation point was there. I restarted and that did not help. I then plugged in an ethnet cable and refigured the mini for ethernet. that did not work. I know the modem and router are working just fine and so is the ethernet since I have other computers on my home network and they all connect ok. Is the airport and ethernet card connected in that if one goes out so does the other? The mini is 2-1/2 years old. I have a Wii and a satellite box on the same shelf as the mini and they both connect to the internet just fine. is my mini toast?
In system preferences- network do you have show airport status in menu bar checked. To the left in network does airport show up. at the top in nework is it on.
-
I would just like my blog to return to its original format with no line down the middle of the page and the top border going across the entire page not just halfway. This happened immediately after I upgraded to Firefox 6. My blog's format is normal on other computers but not normal on my computer. Thank you.
Can you attach a screenshot and maybe post a link?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
If you have increased the minimum font size then try the default setting "none" as a (too) high value can cause issues.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
*https://support.mozilla.org/kb/Changing+fonts+and+colors
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with overlapping text. -
The Mac desktop computer in our house is connected to wifi but you can't browse the internet. Other computers in our house are connected to wifi and are browsing without any issues.
Go step by step and test.
1.Power Cycle
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH11212?viewlocale=en_US
2. Turn off Extensions, if any.
Safari > Preferences > Extensions
3. Turn off proxies, if selected.
System Preference > Network > Advanced > Proxies Tab
Under "Select Protocol", uncheck any box if selected.
Click "OK" then "Apply"
4. Uninstall anti-virus software, if any. -
Frustration: Airport connected yet not *connecting*
My airport recognizes its apple network and registers four full bars in the airport icon, and yet, try as it might, it still can't/won't connect to the internet. I'm not sure what to do. It's happened before and fixed itself--or perhaps I did something to make it work and now I've forgotten what it was. In any case, any help would be much appreciated. Thanks.
(I've installed the latest airport software, too.)Try turning airport off then on again from the menu bar and see if it reconnects. I suspect it will.
If so, I suspect you're running 10.5.2 or 10.5.3. And unfortunately there's no definitive fix, but a lot of people suffering.
Check this thread:
http://discussions.apple.com/thread.jspa?threadID=1397364&start=60&tstart=0
A lot of the possible fixes (that seem to have worked for some) are mentioned. But none are guaranteed. -
Two seperate class files can not resolve (pls help me) THANKS!
When i compile UseMusic.java i get the following:
i can't figure it out..
Thank You for Time!
D:\java\cENG310\Ass2>javac UseMusic.java
UseMusic.java:29: cannot resolve symbol
symbol : variable middlec
location: class UseMusic
mm.caldis(middlec); // compute freqs
^
UseMusic.java:42: cannot resolve symbol
symbol : variable middlec
location: class UseMusic
mm.setzero(middlec); // reset middlec to zero
^
UseMusic.java:56: caldis(java.lang.String[],double[],double) in Music cannot be appli
mm.caldis(middlec); // compute freqs
^
UseMusic.java:81: checkvaild(java.lang.String[],java.lang.String) in Music cannot be
a.lang.String)
boolean cv = mm.checkvaild(strkey);
^
UseMusic.java:86: getfreq(java.lang.String[],java.lang.String) in Music cannot be app
ang.String)
int index = mm.getfreq(strkey);
^
5 errors
* Filename : UseMusic.java
import iopack.Io;
import java.text.DecimalFormat;
* UseMusic this class is
public class UseMusic {
public static void main(String[] args) {
Music mm = new Music();
DecimalFormat fmt = new DecimalFormat("0.###"); // round output to 3 decimals places
boolean newmidc = false;
boolean notelookup = false;
System.out.println("\n\tMusical Scales");
System.out.println("\t---------------"); // display the title and instructions
System.out.println("\n\tDefault note values are:");
mm.caldis(middlec); // compute freqs
System.out.println("\n\t************************");
System.out.println("\t* Notes * Frequency *");
System.out.println("\t************************");
// print old results
for (int i = 0; i < mm.noteName.length; i ++) {
// display values onto screen
System.out.println("\t* " + mm.noteName[i] + "\n");
System.out.println(" " + mm.noteFreq[i] + " Hz *\n");
mm.setzero(middlec); // reset middlec to zero
// prompt user for value of midddle c
while (!newmidc) {
//read value new value for middle c
double middlec = Io.readDouble("\n\tEnter value for Middle C [Between 250 - 265] (Hz)");
// vaildate value for middlec
// vaild if valeu for middle is between 250-265
if ((middlec > 250) && (middlec < 265)) {
System.out.println("\n\tNew note values");
System.out.println("\n\t----------------\n");
mm.caldis(middlec); // compute freqs
System.out.println("\n\t************************");
System.out.println("\t* Notes * Frequency *");
System.out.println("\t************************");
// print old results
for (int i = 0; i < mm.noteName.length; i ++) {
// display values onto screen
System.out.println("\t* " + mm.noteName[i] + "\n");
System.out.println(" " + mm.noteFreq[i] + " Hz *\n");
break; // get out of while
else {
System.out.println("\nError Invaild Input!\nValue must be between 250 Hz to 265 Hz.");
} //end of else
} // end of while for newmidc
// prompt user for note
while (!notelookup) {
//read value new value for
String strkey = Io.readString("\n\tEnter note value");
boolean cv = mm.checkvaild(strkey);
// vaildate value for middlec
// vaild if valeu for middle is between 250-265
if (cv == true) {
int index = mm.getfreq(strkey);
System.out.println("\nNote " + mm.getnoteName(index) + "has frequency of" + mm.getnoteFreq(index) + " Hz");
break; // get out of while
else {
System.out.println("Invaild note!, please try again.");
} //end of else
} //end of while
}// end of static main
} // end of Class UseMusic
* Filename : Music.java
import java.*;
public class Music
static int MAXSIZE = 12; // max # of elements (13 elements)
static double INITALMIDDLEC = 256; // set default value of middle c to 256
double middlec; // user value for middlec
String[] noteName; // array stores name of notes
double[] noteFreq; // array stores freq of notes
boolean vaildstr; // track whether entered string is vaild
char replay; // user's reponse to continue prompt
boolean uContinue; // whether or not to continue
int sub; // index of searched string
// Default Constructor
Music () {
String[] noteName = {"C","C#","D","D#","E","F","F#","G","G#","A","A#","B","C'"};
double[] noteFreq = new double[noteName.length];
middlec = INITALMIDDLEC; // default value of middlec to 256
vaildstr = false; // signify whether user entered value
sub = 0;
void caldis(String[] noteName, double[] noteFreq, double middlec) {
// calculate the values based upon middlec
double temp = 0; // dummy used to store value
double semitone = (double)Math.pow(2,(1/12));
temp = middlec; //set the value of the first element to middlec
// fill noteFreq with values wrt middlec
// no magic #s - noteName since noteFreq has # of elements
for (int i = 0; i < noteName.length; i++) {
temp = noteFreq[i-1]; // save value of previous elements
noteFreq[i] = temp + (temp * semitone);
} //end of for
double getmiddlec(double middlec) {
return middlec; // Returns the value of middlec
int getfreq(String[] noteName, String strkey) {
for (int i = 0 ; i < noteName.length ; i++) {
if (strkey.compareTo(noteName) == 0) {
sub = i;
return sub;
double setzero(double middlec) {
middlec = 0;
return middlec;
String getnoteName(int index) {
return noteName[index];
double getnoteFreq(int index) {
return noteFreq[index];
boolean checkvaild(String[] noteName, String strkey) {
vaildstr = noteName.equals(strkey);
return vaildstr;
} //end of Class Music>
What part can't you figure out? The compiler is
telling you that it can't resolve "middlec", which it
can't, because you apparently didn't define it
anywhere. Actually he did define it, but he defined it after he passed it to those methods. If that's not simply an oversight on his part, I can't begin to understand what he was thinking. -
I bought 2 mac book pros. At home i already had a network with a timecapsule connected to a router and a windows xp lap top connected to it. When i turned both macs on i was able to see the time capsule and the windows xp computer HOWEVER neither mac could see each other......any help would be appreciated.
NickThanks Linc ......you were right on the money. Your help has been awsome. I spent 3 hours last night doing stuff with out any solutions. May I ask you another question if you have the time and patience please. My orriginal setup was 2 windows laptops with XP on them connected with a timecapsule attached to a router. Hence the time capsule made a wireless signal aswell as being an external hard drive. On one of the laptops i have a printer attached to it which was shared so that the other computer could print documents through the network however the computer attached to the printer has to be on. Do you know what i have to do so these new 2 mac book pros can print to that printer? Thanks again for all your previous help. Nick
-
Hello,
I'm experiencing a strange problem. Since I started my Mac Pro (cold start) some hours ago, I've lost the hability to connect to the Internet (Safari and Mail say I'm not connected). However, I can connect to 192.168.2.1 (my router) and see its webpage (it says it's connected to the Internet). If I use another computer on the same network, it can also connect to the Internet.
Weirder, if I go back to my Mac Pro with "no internet" and launch Parallels Desktop, then I can use WinXP to browse the Internet; I'm writing this post on my WinXP virtual machine.
This leads me to think there's a problem with how my Mac OS handles the networking. I have checked the Console, but the only related string I found is this:
16.04.13 22:03:25
kernel
SIOCPROTOATTACH_IN6: en2 error=17
As expected, Google doesn't reveal anything about that (and I'm connected with the first ethernet port). I've tried to restart my Mac, but the problem persists (exact same symptoms).
Could it be a DNS cache issue?
I don't see, other than a DNS problem, why I can't connect to the Internet with my Mac OS while I can on my virtual machines. If it was a driver problem, I wouldn't be able to connect to my router. If it's a DNS issue, where are the DNS caches located in order to clear them (I'd trash the folder)?
I could also reinstall the OS (waste of time, btw), but I'd really like to understand the problem, not just clear it and forget about it.
Or better than guesses, anyone already experienced this?
Any help welcome.If it's a DNS issue, where are the DNS caches located in order to clear them (I'd trash the folder)
No DNS caches, it looks up the alphabetic and then uses the numberic from then on.
http://17.149.160.49
is Apple, Inc main US web site. It that works, and the alphabetic does not, you have a DNS probelm.
Maybe you are looking for
-
Can I use an empty (NFTS)partition on my 1tb WD drive for Time Machine
I have a 1TB WD external hard drive formatted NTFS into 6 partitons. Can I use one of the partitions for Time Machine? or will it try to destroy all the partitions I have on the NTFS drive? I have Macbook Pro (early 2011 with OXS 10.7 Lion) and am ru
-
Error message when attempting to publish page with flash content in cs6
Good day, I have a number of websites that I have created with content from previous versions of flash that I have installed in my html pages. This year I have been repeatedly frustrated by the flash movies working on my computer then not working af
-
Error message when copying a sapquery
hello, I am trying to copy query me80fn to zne80fn so that I can assign a changed infoset to it. I seklect the me80fn and press the copy button. I am copying the new query to the user group /sapquery/me. I get the message "Object can only be created
-
In a site I have a box, with a list of values, but in version 16 and 17 I can´t open that. Version 15 and bellow didn't have any problems to open the list of values.
-
Need info on Product interchangeability in SNP using Optimizer and Heuristi
Can anyone suggest steps to configure product interchangeability in SNP using Optimizer and Heuristics we have a scenario for 1:1 config of predecessor and succesor product , same Units, across locations using Full and Forward directions for some com