Two XY graphs to one jpg

I currently save XY graphs to JPG files, but I am looking for a way to take two XY graphs and marry them to the same JPG file.
I am using LV 6.1 and WIN 2000.

> I currently save XY graphs to JPG files, but I am looking for a way to
> take two XY graphs and marry them to the same JPG file.
> I am using LV 6.1 and WIN 2000.
Hello
look at palette Functions>>Graphics&Sound>>Picture Plots
There is Plot XY.vi with top left point(0,0) input and picture output
If you use this vi twice and set properlly top left point(0,0) inputs, you
could see two plot on one picture indicator.
Next:
Functions>>Graphics&Sound>>Picture Functions Picture to Pixmap.vi and
Functions>>Graphics&Sound>>Graphics Foprmat and use Write JPEG File.vi
I stronglu sugest look more picture functions at Functions>>Graphics&Sound
Palette
regards
Mikrobi

Similar Messages

Two different Graphs in One Chart

Hi,
I've created a chart to graph two measures and by default, they are both bar graphs. Is there a way to have one of the measures graphed as a bar graph and the other as a line (both in the same chart)?
Karen

After reading through the options again (carefully this time), there's a Graph type = Line Bar Combo.

I save two copies of an image, one jpg, one tiff. LR will not display the jpg or let it be available, only the tiff. When I try to put another copy of the jpg into the folder LR says the jpg is already there.e

I converted an rgb image into a grayscale image and saved two copies, one jpg, one tiff, into my chosen folder.
I tried to import both into LR, which only showed the tiff in the import dialogue. After import LR only shows the tiff in the folder but when I try to insert the jpg into the folder using Explorer LR reports that the jpg is already in folder.
How can I get LR to display this jpg image?

Hi,
I have an example here that is intended to demonstrate the difference between Positioned and Flowed subforms: http://assure.ly/i8pSdy.
This shows how you can use a slider to change the dimensions of the image object.
I have extended this to an example with buttons to scale the image: http://assure.ly/i8ZI5Y
This may not be fine enough for your purposes, but it may give you some ideas.
Good luck,
Niall
Assure Dynamics

How do I get a two line graph to show all the months in the data table and not just every second one?

My two line graphs covers six months, but only shows three months How can I make it show all six months

select the chart, then open the Chart Formatter:
Then click "Axis", then "Category (X)"
Change the "Label Angle" to "Left Vertical" or "Right Vertical"

Plotting multiple graphs on one waveform chart with dynamic data types

I'm trying to put multiple graphs on one waveform chart and having data agreement errors. I'm wondering if it has anything to do with the fact that dynamic data is being used (I've had no problems with other datatypes in the past). Does anyone know how to correct this problem? I've attached the following .VI. There will be plenty of .VIs on the bottom that won't load, but they are not consequential for this problem.
Thanks!
Brian
Solved!
Go to Solution.
Attachments:
Stiffness Control V1.vi ‏119 KB

you could use stacked plots by right clicking on the chart and clicking on the stacked plots and than on the front panek you can put a bundle function on the FP and hook your signals up
Harold Timmis
[email protected]
Orlando,Fl
*Kudos always welcome
Attachments:
multiplotwaveform.JPG ‏138 KB

Insert PDF into new Adobe Form - merging two PDF files into one

Hi everyone,
I need to enable access to archive PDF files but within a new PDF file containing header and footer.
Request is not to change archived PDF files at all.
I use Web Dynpro application to upload PDF file and to display new PDF file.
I thought converting archive PDF files into JPG files and than using an 'Image Field' object to display those in a new PDF file.
I am dealing here with PDF version 1.3 files.
I am also having trouble converting these PDF files into JPG files. Any sugestions one this problem?
Does anyone have any suggestion on how to deal with this concerning the fact that archive PDF files can not be changed?
Is there some other way to merge two PDF files into one using Adobe Designer?
Regards,
Amel

Hello, Lukasz:
I am also facing similar requirement from my customer.
And I found one useful blog, hope this blog can help you.
http://wiki.sdn.sap.com/wiki/display/WDJava/CombinePDFfileswithWebDynproforJava
Best regards, Nick.

3 graphs on ONE paper

I have made an LV in labview6.0. It is used to show three types of graph in one place. It is attached. They are (i) Force Vs velocity (ii) Force Vs Distance and (iii) No. of rotations vs distance. Is it possible to show only ONE type at a time without too much adjustments everytime?
Attachments:
forum RTF.rtf ‏218 KB

Hi everyone!
Using an enum with a Case Structure is a great option that will allow you to accomplish what you're trying to do. Just to round out the discussion here, though, let's talk about some Express technology that could make this task even easier. Express technology was first introduced in LabVIEW 7, and it has been greatly extended in versions 7.1 and 8.
Express technology is a set of VI's that use configuration-based dialogs to actually implement the code for the selections you make in the dialog. LabVIEW actually does the coding for you!
Consider the following example, which uses the Prompt User for Input Express VI to pop up a dialog asking the user to place checkmarks in the checkboxes for the signals to be graphed. Then 3 signals are simulated and only the selected signals are graphed by using the Select Signals Express VI. The code itself is very easy, since LabVIEW implements the decision making code for you.
LabVIEW 7 and above also contain other features which will make your programming experience easier, such as an increased number of examples and documentation, simplified wiring techniques, and more.
I'll attach a screenshot of the code for those of you who don't have LabVIEW 7.1 or above.
Jarrod S.
National Instruments
Attachments:
Signal Selector.vi ‏443 KB
Express Solution.JPG ‏74 KB

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
What we found from out testing:
- The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
- The file can be closed and Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
- Also, until the Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file.
Example Scenario:
- User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
- Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
- User 1 saves his file and closes it - but Dreamweaver is still open.
- User 2 also saves his file and leaves Dreamweaver open.
- The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
- If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
- Same for User 2, he will open 'his' version with 2300 lines in.
Other information:
- Files are opened directly from the server
- Sometimes the users will save incrementally and re-open
- Most of the time users will save incrementally and keep the files open
- The users will never not save incrementally and just save when closing the file once finished
- The users are usually working on the files all day
- It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
Anyone know if this is a known issue?
Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
Thanks

Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium

Two apple I.D., one with the .me email address I want, how can I delete it so that I can use that .me address on my other account?

I have two apple I.D., one with the .me email address I want, how can I delete it so that I can use that .me address on my other account
Or is it possible to transfer the purchases (apps) to my new .me account so that I can re-download them in the future without having to switch accounts?

crazyshark wrote:
I have two apple I.D., one with the .me email address I want, how can I delete it so that I can use that .me address on my other account
Or is it possible to transfer the purchases (apps) to my new .me account so that I can re-download them in the future without having to switch accounts?
You can't do this, and you can't transfer purchases between accounts. There is no conflict about using one ID for iTunes, iTunes in the Cloud and iTunes Match (the ID you've been using for iTunes) and using the other ID for iCloud.

Ok, I have two itunes library account one for the PC and one for my Mac, I have my first iphone on my PC, but i just upgrade and I would like to use my new iphone on my Mac but all of my apps and other stuff is in the first library.. How do I put my apps

ok, I have two itunes librarys account, one for my PC and one for my Mac, I use the PC for my iphone, but I upgrade my iphone and all my apps and
stuff is on the first itunes library. How do I put the apps from one iphone to the otherusing two dirffernt itunes library? please help..

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

Is it possible for two people to use one iMac with iPhone and iPad separate iTunes and iCloud acc?

Apologies if this is a very obvious question. I have one iMac that my husband and I use, he has an iPhone that he syncs with the iMac via iTunes for app such as docs to go. I recently purchased an iPad, I want to also sync with the iMac. Is it possible to use two iTunes and two iCloud acc to one iMac? We would like to pick and choose what we sync as we keep separate docs etc on the iMac, can this be done?

Yes. Just set up your own account in System Preferences > Accounts (User &groups in Mountain Lion). You'll have your own seperate everything including mail.

Can you have two Apple IDs on one IPAD? One for school and one for home?

Can you have two Apple IDs on one IPAD? One for school and one for home?
If so do you know how to do it?

It depends on what you want to do.
You could, for example, have one AppleID for iCloud backup [and therefore message syncing, notes syncing, etc] and a second one for iTunes [music, iBooks, etc].
But if you are looking for a way to flip everything between different appleIDs, then no.

Can you have two apple ids on one mac?

Can you have two apple ids on one mac? We each have iPhones and want to utilize iCloud. Is this possible?

No, in this case the 2 user accounts with its own Apple IDs would be completely seperated.
If you want to share this things like music and app purchases you will have to to something else.
1. Create two user accounts on your Mac (user A and user B).
2. Create two iCloud accounts just for Mail, Contacts, Calendars, Photos, etc. (one for user A and one for user B):
On your Mac (with Mac OS X Lion or Mountan Lion):
Settings > Mail, Contacts, Calendars > iCloud > Create an Apple ID (button in left corner)
On your iPhone, iPad or iPod touch (iOS 5 or later):
Settings > Mail, Contacts, Calendars > Add Account > iCloud > Get a free @me.com address and create a new Apple ID
3. It is not recommended because you shouldn't share your Apple ID account information with other people but you could set up your old Apple ID as an account just for store purchases (Apps, Music, ...) so that everyone of you can manage the purchases in their own library (Access is limited to 10 devices). Therefore you have to setup this "old" ID in Settings of your iOS devices (Settings > iTunes & App Store) and in iTunes on your Mac.

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Help

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!

You need to be very careful which project you open in which version.
For 2014 make sure its on 2014.1 build 81.

Two ipod users on one computer

Does anyone have any info on how to set up different iTunes for two different users? My wife and I both now have nanos, and very different tastes in music. How best to handle? Two different iTunes on one computer? Thoughts?

The best way to have completely different iTunes libraries would be to set up separate accounts in Windows for each of you. That way you can each maintain completely separate music libraries.
If you just want to have different sets of music on your iPods, set them either for manual updating or to update only selected playlists, then keep individual playlists for each of your iPods.

Two XY graphs to one jpg

Similar Messages

Maybe you are looking for