Type 2 Virtual Machine in Hyper-V will not PXE boot with WDS

Hi
Bit of a wierd scenario this but I'm doing a bit of a lab experiment kind of thing. The setup is as follows:
VMWare Workstation 10 with Windows Server 2012 R2 running as a virtual machine. In VMW10 I have a NAT network interface and a Bridging interface set to load with the virtual machine. These seem to work fine (although the NAT doesn't seem to want to connect
to the internet but that's why the bridging one is there in addition).
Server 2012 is configured with the following roles:
ADDS, DHCP, DNS, Hyper-V, Printer, WDS
I have correctly configured WDS to work on the same machine as DHCP and I can get PXE boot working with WDS on a Type1 Virtual Machine in Hyper-V using the Legacy Network adapter. My problem is when I try and PXE boot on a Type2 Virtual Machine (this type
is new in R2 and should eliminate the need for a legacy network adapter) using the same network interface that I used for the Type1 machine, I get an IP address from DHCP but WDS doesn't seem to respond. Instead I get the "PXE-E16: No Offer Received"
message. I have tried just about everything I can think of and spent the whole day trying to figure out why this is the case but came up with nothing. Has anyone else encountered this or can anyone shed any light on the matter?
Many thanks in advance

"VMWare Workstation 10 with Windows Server 2012 R2"and "Server 2012 is configured with the following roles: ADDS, DHCP, DNS, Hyper-V, Printer, WDS"
Hyper-V is not supported to be run as a VM. It is a Type 1 hypervisor, which means it works on the bare metal. You have it running as a VM on a Type-2 hypervisor, so it has no access to the bare metal. Yes, VMware may have made it so some
things work in that environment, but it is not a supported (or tested) environment for Hyper-V.
.:|:.:|:. tim

Similar Messages

E7250 will not PXE Boot with SCCM 2012 R2

Just received our new version Dell laptop the E7250. We are using SCCM 2012 R2 OSD to build our computers. We currently have 6 Dell computers (2 desktops 7010 and 790 and 4 laptops 6410, 6420, 6430 and 5440) that are using the same WIM file. Never had a problem with the network drivers until now with the E7250. It loads the WIM file but as soon as it says "preparing network connection" it fails. I hit F8 and try an IPCONFIG and I don;t see an IP address. So I'm thinking Network Driver issue, so I add the network driver to the Boot image and still can't get past "Preparing Network Connections". Any ideas?
Thanks

I got the same issue, both the Dell and Intel drivers only have Intel L217-LM drivers, the Latitude E7250s I've got need L218-LM drivers. I've tried older versions of the family driver package from Intel, but no good.
Perhaps its not the driver packages but rather SCCM 2012 R2 that doesn't pick up the 218 drivers in the packages, but I'm stuck.

MDT 32bit boot image does not boot type 2 virtual machine in hyper-v

I created a type 2 virtual machine on a windows server 2012 R2 and tried to boot it with MDT 32 bit (x86) boot media and it will not boot.
Same media works if I use type 1 virtual machine .
Is this expected behavior ?
Thanks

Hi,
Yes as Gen 2 machines only nsupports only x64 os and the following OS:s
Windows Server 2012
Windows Server 2012 R2
64-bit versions of Windows 8
64-bit versions of Windows 8.1
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Toshiba L755 is the only one that will not PXE BOOT

I have a few host on my network which it has VMWare 10 installed, successively performed deployment into those machines(Hosts and created VM"s). Now, I do have also a Toshiba L755-S5258 that will not complete the process, it does not give any
errors. The following is the messages it gives.
Client MAC ADDR: xx xx xx xx xx xx GUID: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXX
Client IP:XXX.XXX.X.XX MASK: XXX.XXX.XXX.x DHCP IP: XXX.XXX.X.X
Gateway IP: XXX.XXX.X.X
Downloaded WDSNBP...
Press F12 for network service boot
Windows Deployment services: PXE boot Aborted.
PXE-MOF: Exiting Intel PXE ROM
This si the only unit that does not follow through with the deployment
Note that I've deleted other machines that I successively deployed to from the Known Computers on Active Directory User and Computers, with not good results
Please any one help me decipher this headache

Hi,
Are your using the WDS for the Windows deploy? A network boot program (NBP) is the first file that is downloaded and executed as part of the network boot process and it controls
the beginning of the boot experience (for example, whether or not the user must press F12 to initiate a network boot). NBPs are specific to both the architecture and firmware of the client. You must accounting the screen press F12 to allow the system boot
from the WDS. The VMware® workstation PXE booting issue please ask your software vendor.
The related KB:
Managing Network Boot Programs
http://technet.microsoft.com/en-us/library/cc732351(WS.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to Install Hyper-V on a Virtual Machine in Hyper-V on windows 2erver 2012 R2 ?

Hi ,
anybody know How to Install Hyper-V on a Virtual Machine in Hyper-V on windows 2erver 2012 R2 ?
I want to create lab but i couldn't I follow this article but the new VM is off
http://blogs.technet.com/b/gbanin/archive/2013/06/26/how-to-install-hyper-v-on-a-virtual-machine-in-hyper-v.aspx
one of hyper-v component is not running
thanks

Previously it has been blocked to install Windows Server in the VM and then add the Hyper-V Role.
However, it has always been possible to install Hyper-V Server inside a VM. (the free Hyper-V Server SKU)
The Hyper-V Server VM is fully manageable, but it cannot start any VMs.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Harddisk damage after sleep mode while running 3 virtual machine on Hyper-V

Hi, I have laptop with specification Intel Core i3, 8 Gb ram, 500 Gb 5400 rpm Hdd. I am running 3 virtual machine on that laptop using Hyper-V. Each vm have 1 Gb ram and 1 core processor. I left the laptop for
lunch. After comeback from lunch I see that laptop on sleep mode. I press the power button to turned back on the laptop, after the power is on, the harddisk won't boot and the disk become damage. Is there anyone could explain why that is
happen? Thanks :)

Hi Budi-Kurniawan,
Based on your description, this issue shouldn’t be caused by current configurations on your environment (as
you described: wake up from sleep mode while run 3 virtual machine on Hyper-V). I guess that there are some troubles in this harddisk. As Dave mentioned, please contact with laptop manufacturer and confirm it. I believe we will get a better assistance there.
Best regards,
Justin Gu

How to Allow microphone and all hardware in Virtual Machine using Hyper-v

I have recently installed Windows 10 preview in Windows 8.1 pro.
How i can allow Microphone and all things in virtual machine from Hyper-v
Thanks
Thank You , Shan Ali Khan

You connect to the VM using the RDP Client - connecting to the IP / name of the VM over the network.
This enabled all device redirection by default.
You can possibly use Enhanced Session Mode as well. That again uses RDP under the hood.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Could not intialitize a virtual machine on Hyper-V Manager on a Windows 8.1 laptop

Hello,
I am receiving the following error when I try to start any virtual machine on Hyper-V Manager on a Windows 8.1 lap"color:black;">An error occurred while attempting to start the selected virtual machine(s):
Morillo-DC could not initialize (Virtual Machine ID …)
On the Event Viewer, I can see:
Event ID 3040
Log Name: Microsoft-Windows-Hyper-V-Worker/Admin
Morillo-DC could not initialize (Virtual Machine ID …)
Thank you in advance for any help.
Regards,
Alberto Morillo

Hello,
Hyper-V was working fine with Windows 8 before installing Windows 8.1 update.
On the Applications and Services Logs (Event Viewer), I found the following event:
Log Name:
Microsoft-Windows-Hyper-V-Worker-Admin
Source:
Microsoft-Windows-Hyper-V-Worker
Date:
12/16/2013 3:59:13 PM
Event ID:
3040
Task Category: None
Level:
Error
Keywords:
User:
NT VIRTUAL MACHINE\E304221F-2B11-4E29-B235-85A3F505EC48
Computer:
MorilloPC
Description:
'borrar' could not initialize. (Virtual machine ID E304221F-2B11-4E29-B235-85A3F505EC48)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-Worker" Guid="{51DDFA29-D5C8-4803-BE4B-2ECB715570FE}" />
<EventID>3040</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-16T19:59:13.665065300Z" />
<EventRecordID>114</EventRecordID>
<Correlation />
<Execution ProcessID="6364" ThreadID="3340" />
<Channel>Microsoft-Windows-Hyper-V-Worker-Admin</Channel>
<Computer>MorilloPC</Computer>
<Security UserID="S-1-5-83-1-3808698911-1311320849-2743416242-1223427573" />
</System>
<UserData>
<VmInitialize xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>borrar</VmName>
<VmId>E304221F-2B11-4E29-B235-85A3F505EC48</VmId>
</VmInitialize>
</UserData>
</Event>
Thank you for your help.
Regards,
Alberto Morillo
SQLCoffee.com

I want to deployment virtual machine by Hyper-V with windows 2012 server

I want to deployment virtual machine by Hyper-V with windows 2012 server. So I need step by step guide line with screenshot and video link.
Thanks,
Qamrul

Hi Qamrul,
Additionally here is the link for hyper-v getting started guide (server2008 ) :
http://technet.microsoft.com/en-us/library/cc732470(v=ws.10).aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Working in adobe illustrator - computer crashed - will not soft boot or reset PRAM - should i reinstall from CD snow leopard 10.6.3? I have an extra hard drive in my MAC with time machine on it set to do auto back ups. How do i recover ?

working in adobe illustrator - computer crashed - will not soft boot or reset PRAM - should i reinstall from CD snow leopard 10.6.3? I have an extra hard drive in my MAC with time machine on it set to do auto back ups. How do i recover ?

Well first you have to figure out what is wrong with the machine and solve that problem first.
Your post is very vague on what occured, and there are many types of "crashes" it really depends upon what see on the screen and what the hardware does, we can't see it to tell you, so you have to tell us.
I suggest you run through these user tips and provide more information about your hardware.
Disconnect the TimeMachine drive for now
..Step by Step to fix your Mac
Help us to help you on these forums
Create a data recovery/undelete external boot drive
If this is going way over your head, there are local PC/Mac techs that will assist you for a fee, Apple only does hardware repairs and is advised to use them if you discover it is, especially if under warranty/AppleCare.
Hard drive and RAM upgrades can be handled yourself or by a outside tech in many older models of Mac, but don't expect Apple to cover the new parts.
Install/upgrade RAM or storage drive in Mac's

Not working right-will not let me type a new emall, pull contacts, also will not let me use wireless printer-kept shutting down windows.

firefox will not let me type in yahoo mail as new email. will not pull up contacts. also, when I use wireless printer-it shuts down windows.

Couple of points...
DJ_Jynxx wrote:
The thing is, this MUST be an Audition CC issue for two reasons. One, everything worked fine in CS6, which I was using right before I upgraded to CC. I even did a clean install of it by removing CS6 completely.
All versions of Audition can co-exist on the same machine quite happily - there is no interaction between them at all, and the system was designed to be like this. So there's nothing to stop you keeping CS5.5, CS6, CC and even Audition3 on the same machine.
The other thing I'm wondering about is Windows 8. There have been a considerable number of complaints about this doing weird things, including with Audition. I have a system that in many ways is very similar to yours, except that I don't overclock the mobo, and use a professional sound device (or two) with it (RME). The major difference though is that I use Windows 7 pro 64-bit, and I haven't had any of these problems at all. Yes I use it for a living, as well, but I don't bother with multiple DAWs - don't have time for all that these days. But I do use iZotope's RX software in its standalone mode without any difficulty.
I'm not claiming that Audition CC is trouble-free - any number of Mac users will confirm that - but people running it on W7 certainly seem to have far fewer problems with it. It may also be worth trying an uninstall-reinstall of CC - you never know. But differences in preview quality certainly point towards audio drivers, I'm afraid...

OS is Mountain Lion, upgraded no problems, used an external Hard drive for my time machine, now my iPhoto will not show any of my photo's or ay new ones I import! Help please!!

OS is Mountain Lion, upgraded no problems, used an external Hard drive for my time machine, now my iPhoto will not show any of my photo's or ay new ones I import! Help please!!

Do you get this window when you hold down the Command+Option keys and launch iPhoto?
If not then you're not holding down both keys long enough.
OT

SCOM 2012 RC - SCVMM 2012 RC - Virtual machine manager management group is not getting monitored

Hi All,
I have integrated SCOM 2012 with SCVMM 2012 environment. I could see two strange behaviors. All these instance are running on Windows 2008 R2 + Sp1 OS along with SQL 2008 R2 for database.
1) I could see two instance of VirtualmanagerDB
in the Database State view under the Microsoft SQL Server, out of that
one is showing as monitored and another one is
showing as not monitored. Why it is showing two instance of the same database? How can I remove the not monitored one?
2) In the distributed apps- Virtual machine manager management group is not showing as a monitored item. However the SCVMM server is getting monitored.
I'd appreciate if someone could help me out in understanding and resolving this.
Regards,
Ren.

Hi
I opened up a connect ticket on this on 17th Jan so sorry for not noticing your post earlier. The response was:
Health State dashboard view is targeted to two state views. "Agent Watcher State" and "Agent State". "Agent State" view (view with duplicate entry) is targeted to an abstract class "VMM Agent" which has below child classes.
    VMM Library Agent
    VMM Host Agent
    Guest Agent
For the Dashboard view, we need to taget the view to "Host Agent" not "VMM Agent". When we install VMM, it adds itself as a Library server and that is the reason for duplicate entry (VMM Library Agent).
Cheers
Graham
Regards Graham New System Center 2012 Blog! -
http://www.systemcentersolutions.co.uk
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/

Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

If you think you're insane now, try maintaining those pop up menus.
As far as I know, these menus have not been updated since FW 8, so
they are at least two versions old.
Save yourself a lot of grief by avoiding those menus. There are many
other products on the market which do a much better job of creating
and maintaining this type of navigation structure.
Read this link before you climb any higher on this slippery slope:
http://apptools.com/rants/jsmenu.php
There was another blog post by the fellow who originally wrote the pop
up menu feature, but I can't seem to locate it. Even he says stay away
from them.
Not the answer you probably want, but I hope it helps, nonetheless.
Jim Babbage

Lotto.nl will not starts, only with MS explorer

lotto.nl will not start, only with microsoft explorer on my laptop asus x 51 series

Dear Smith_123:
Thank you for your reply. However, Office had never been previously on the OS as it was never purchased. I do have Office for Mac 2011 but that is 32 bit and is not on the VMWare / Windows side of the machine. But even if I had, I would not know
how to clean up the residual file or registry keys without assistance.
After 1 hours and 20 min on the phone last evening and being handed from person to person through literally 9 different people, I finally reached someone that seemed knowledgeable in MS Support. But all they would give me was a circular answer:
We can't help you because it is a Trial Version for which there is no support offered. When I explained I wanted to be sure Visio worked on my machine prior to spending between $300 and $600 on a copy, Support could only say that I would have to purchase it
first before they would give me any help to see if it works. When I offered to purchase it right then since I had finally gotten to someone who appeared as though they could help, he told me that he was Support and not Sales so I would have to go elsewhere
to purchase the product. Very frustrating.

Type 2 Virtual Machine in Hyper-V will not PXE boot with WDS

Similar Messages

Maybe you are looking for