Type Tool bug in Photoshop since latest update

Found another annoying bug:
1. Select your type tool and type something
2. Press Shift and click anywhere else on your page
It deselects the text you were working on and activates a new text box. Usually, I press shift and then drag the layer to keep it aligned as I drag the layer...now it acts like I want to create a new text box....sigh.

You are correct but only if you are done typing do you press Ctrl +enter to close the type box. But sometimes, in mid-sentence if you decide you want to move the text box over to the right while you are still working on it, you could have (before the latest update), pressed shift and then just drag the text and then continue typing.
It's not a "huge" deal but it is slightly annoying when you are used to working a certain way and you keep clicking "out" of the text you're working on.

Similar Messages

  • Final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support.  Have tried reinstalling

    final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support, paralyzed.  Have tried reinstalling, default settings etc
    Appreciate suggestion, working on deadline. Thanks.  

    Here is the start of the crash report:
    Process:         Final Cut Pro [20568]
    Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCut
    Version:         10.0.1 (185673)
    Build Info:      ProEditor-185670300~1
    App Item ID:     424389933
    App External ID: 4138831
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [102]
    Date/Time:       2011-11-11 20:41:32.201 -0800
    OS Version:      Mac OS X 10.7.2 (11C74)
    Report Version:  9
    Interval Since Last Report:          192058 sec
    Crashes Since Last Report:           14
    Per-App Interval Since Last Report:  157161 sec
    Per-App Crashes Since Last Report:   14
    Anonymous UUID:                      DD542B2F-58A0-482E-AAFA-ECADEC76F562
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000280000003
    VM Regions Near 0x280000003:
        CG shared images       00000001cbf62000-00000001cc182000 [ 2176K] r--/r-- SM=SHM 
    -->
        STACK GUARD            00007fff5bc00000-00007fff5f400000 [ 56.0M] ---/rwx SM=NUL  stack guard for thread 0
    Application Specific Information:
    objc[20568]: garbage collection is OFF

  • Airprinting  from iPad since latest update 8.1.

    Why can we no longer Airprint from our iPads since latest update 8.1.
    Also finding screen freezes for a short time frequently and a Google search often closes.
    Neither of us were experiencing any problems before update.
    Please help

    Hi the best way to solve your problems is to Restore To factory settings this will get rid of any bugs Backup to iCloud on iPad Go to settings Reset Factory Restore You will get all your data back after this You just need to use the same Apple ID Also sometimes cloud drive can be a problem of so disable this in settings Later. Cheers Brian

  • Since latest update to airport extreme im getting 10 unknown base station and time capsule items showing in airport utility as a network.  when able to "forget" them they initially drop off but soon return. how do i get them deleted and stay that way

    since latest update to airport extreme im getting 10 unknown base stations and time caps showing up as though they are a part of my network. sometimes i can "forget" them and they will disappear initially but soon return. i need and want only my connection inside my home . any ideas. i have done a factory reset and set up a new network but they continue to show up.

    I'm not convinced that the problem lies in Airport Utility. This same thing was happening to me, nearly exactly as you describe it. The thing is that with me, the problems clearly started when I updated the firmware in my Airport Express (n). That's when all the wacky stuff started happening. Sometimes it would show up in AU, sometimes it didn't and even if it didn't, I could still access the internet through it.
    But as you said, the problems got really bad when another Express (b/g) was put on the network with it. Even when it did work, the (b/g) would make it impossibly slow.
    You know more about this than me, and clearly have more patience if you've restarted the network fifty times. I gave up at about ten.
    In any case, your solution is more of a work around and if you're still having that slow connection problem, I'm not sure you've got it. But thanks for your reporting of this. At least I know I'm not crazy.

  • My Windows XP and Windows 7 iTunes no longer 'see' my AppleTV since latest update (25/02/2013). Also, my AppleTV tells me I must turn on Home Sharing which is already turned on.

    My Windows XP and Windows 7 iTunes no longer 'see' my AppleTV since latest update (25/02/2013). Also, my AppleTV tells me I must turn on Home Sharing which is already turned on. I have the little arrow that normally selects my AppleTV in iTunes but AppleTV is no longer listed (only My Computer). Is there an issue with the latest update. This is probably my fault by telling everyone how good AppleTV is and that it just works! Doesn't work any more :-( I have tried all the usual restarting of AppleTV and PCs. I'm having to revert back to the Samsung Blu-ray player's PC sharing :-(

    Restarted router(s) and it works again.

  • HT202157 My apple tv 3 doesnt work at all since latest update, how can I restore when it wont even turn on?

    Having trouble with my apple tv since latest update, it has died and can't turn on as it doesn't recognise anything, what can I do?

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
        1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
        2.    Connect the micro USB cable to the Apple TV and to your computer.
        3.    Reconnect the power cable (only for Apple TV 3)
        4.    Open iTunes.
        5.    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • HT6058 my ipad screen will not rotate since latest update

    my ipad scrren will not rotate since latest update, i have done everything i can think of including wha tapple told me

    What have you tried, and what did Apple tell you ?
    Is there a lock symbol at the top of the screen next to the battery indicator ? If there is, then depending on what you've got Settings > General > Use Side Switch To set to (rotation lock or mute notifications), then you can lock/unlock the rotation by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via control centre instead : http://support.apple.com/kb/HT4085
    If there isn't a lock symbol then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Cannot send virginmedia webmail since latest update

    Can send virginmedia webmail with other browsers. Virgin have checked and all connections are fine - they can use my webmail but since latest update I cannot

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates

  • Have lost Hotmail since latest update

    Since latest update cannot open Hotmail ,screen is blank apart from send ,reply icons etc along top of screen.
    mail is coming in number of mails goes up on mail icon but can't access .

    There are several possible causes for this issue. Take each of the following steps until it's resolved.
    1. Follow the instructions in this support article.
    2. Reset the System Management Controller.
    3. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
    4. A swollen battery in a MacBook Pro or Air can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced.
    5. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built in trackpad of a MacBook to  behave erratically. If you're using such an adapter, disconnect it and test.
    6. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
    7. If none of the above applies, or if you have another reason to think your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
    8. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • HT6065 Since latest update i have a login loop, can someone help?

    Since latest update i have a login loop, can someone help?

    Hold down the Power button for 5-10 seconds until the computer shuts down. Restart. Report what state the computer is in at that time.

  • I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

    I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

    Downgrading the iOS is not supported by Apple.Have yo tried:
    - Backing up and restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    - Go to the OverDrive support site

  • Syncing with iPad mini does no longer work since latest update of iTunes

    Syncing with iPad mini does no longer work since latest update of iTunes and iPad mini

    Hi grecokev,
    Thank you for contributing to the Apple Support Communities.
    You mention that your iPod nano is no longer recognized by iTunes after an update. Reinstalling iTunes is a good troubleshooting step, and if the device still doesn't appear in iTunes, try the following steps next:
    Turn off your computer and your iOS device or iPod, then turn them on again.
    Check to make sure that you've installed all required updates for your computer.
    Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
    USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
    You can find these steps in this troubleshooting article:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    If the steps above don't solve it, see the section of the article called "Verify that Apple Mobile Device Support is installed" for some additional steps to try on your PC.
    Best Regards,
    Jeremy

  • Photoshop CS4, Windows 7 - move and type tool bugs

    My company recently had me upgrade my Dell Lattitude E6400 laptop from Windows XP to Windows 7. It was a reimage, so I had to reinstall all my software. Previously, I never encountered any bugs with Photoshop (barring the one that doesn't allow you to exit layer options, e.g., opacity, without physically changing layers)... anyway, now I've got two rather - extremely - irritating issues that resolve only when I restart Photoshop.
    1. Move tool (I use CTRL + Click and hold most often): when I place my cursor on the screen, on the object I wish to move (with the correct layer selected), then I try to move this object, suddenly the object JUMPS to some far away corner of the screen. All I am trying to do is what I've always done, move something over a small bit; instead, I have to chase it around. It's like the center of the object/layer suddenly changes.
    This issue seems to go away - at least for a while - if I restart phothoshop. But, if I leave it open for a while (as I use it 4+ hours a day) it returns, inevitably. SOOO frustrating.
    2. Changing text box size: Every so often when I go to adjust the width/height of a text box - while using the text tool - something happens that causes the text box to actually skew/scale/distort/etc. the text. I've never seen this happen before - not on my personal copy/machine, nor on the Windows XP install.
    I've Googled these issues, but to no avail. I'm hoping *some*one out there has some thoughts, particularly for the first issue, which is by far the more irritating of the two, as I end up chasing things around the workspace. (I often have to zoom WAY out, hit CTRL + T to get the transform box to show me where in the workspace it is, and it's generally FAR out of view.)
    Thanks, in advance.
    -Jennifer

    Some screen interactivity will be reduced without OpenGL, but it's livable.
    OpenGL use was new for CS4, and as it was a whole new way of getting information onto the screen it did cause some problems.
    If you do find the problem is gone without OpenGL (and I suspect it may be; I used CS4 for a long time without seeing what you're seeing so I'm convinced it's a problem on your specific system), check the video driver upgrades from Dell.  A lot of drivers are coming out specifically to support OpenGL as Photoshop needs it - of course, nowadays, that's for CS5 mostly but it's likely helping to make OpenGL more stable for CS4 as well.
    -Noel

  • Type Tool Problems. Photoshop CC. on Windows 8

    Hi, When I try to use my type tool in photoshop the photograph I am trying to enter text on to goes completely black and I cannot see what I am typing.  I am sure the solution must be simple but I cannot find it.  I want to watermark my photos and it is turning into a bit of a problem.  All the videos I have watched show that entering type should be a simple task but I click on the type tool then click on my photo to commence typing and the photo goes completely black.  Any help will be very gratefully appreciated.

    That sounds like it may be caused by windows 8 and the display driver installed. Check the display makers web site to make sure you have their latest windows 8 device driver installed.
    As fro watermark using text check out the Crafting actions package's sample actions.,
    Crafting Actions Package UPDATED May 2, 2014 Updates some text and added StampExif Action and Script.
    Contains
    Action Actions Palette Tips.txt
    Action Creation Guidelines.txt
    Action Dealing with Image Size.txt
    Action Enhanced via Scripted Photoshop Functions.txt
    CraftedActions.atn Sample Action set includes an example Watermarking action
    Sample Actions.txt Photoshop CraftedActions set saved as a text file.
    More then a dozen Scripts for use in actions
    Download

  • Since latest update why when I click a tab to read that page (not closing it) it removes that tab? big headache

    since the latest update, if I have three tabs open and select one to read it is automatically closed. I didn't X it out. There is also a scroll tab icon pops up whenever I want to enter a username or password and I have to click three or four times until I'm allowed to enter any information.
    This new update is making it difficult to use Firefox.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for