U2018Holdingu2019 and u2018To be deliveredu2019 status in XI

Hi all,
Pls tell why the status u2018Holdingu2019 and u2018To be deliveredu2019 are present in message monitoring of RWB but not in the status (MSGSTATE) field of SXMSPMAST table.
My need is to write a report to get the messages based on the these status from table level.
Pls let me know answer for this.
Regards,
Suhas

Hi Eng Swee,
there are messages that were cancelled yesterday and the status is 'Terminated With Errors'
this is what is indicated in the Audit Logs
2014-03-26 02:38:47
Information
Admin action: Trying to fail message.
2014-03-26 02:38:47
Error
The message status was set to FAIL.
2014-03-26 02:38:47
Information
Admin action: The message was successfully set to status failed.
2014-03-26 02:38:47
Error
Asynchronous error detected: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Message failed by admin.. Trying to report it.
2014-03-26 02:38:47
Error
Asynchronous error reported.
Is this the reason why the messages are stuck?
thank you!

Similar Messages

If for some reason u have the icon in your task bar (the one with 2 arrows pointing in a circle) just go into mobile me pref...click sync...and uncheck box show status in menu bar. My question is, I do not have this option. How do I get the sync to stop

"if for some reason u have the icon in your task bar (the one with 2 arrows pointing in a circle) just go into mobile me pref...click sync...and uncheck box show status in menu bar."
I do not have the option box to "show status in menu bar"
I tried the free for a little while Mobile me, and didn't use it, so cancled. I cannot get the sync status roundabout arrows out of my status bar. AND, they keep trying to sync.
Another issue related with this is that during the time that I tried out Mobile me, I had my ical alarm set to go off every 2 hours. NOW my computer has an ical pop-up every 2 hours. I cannot find how to stop it.
Another issue, Yahoo is trying to sync with my computer and I have no idea why or where that one came from.
Can anyone out there help me please.

"if for some reason u have the icon in your task bar (the one with 2 arrows pointing in a circle) just go into mobile me pref...click sync...and uncheck box show status in menu bar."
I do not have the option box to "show status in menu bar"
I tried the free for a little while Mobile me, and didn't use it, so cancled. I cannot get the sync status roundabout arrows out of my status bar. AND, they keep trying to sync.
Another issue related with this is that during the time that I tried out Mobile me, I had my ical alarm set to go off every 2 hours. NOW my computer has an ical pop-up every 2 hours. I cannot find how to stop it.
Another issue, Yahoo is trying to sync with my computer and I have no idea why or where that one came from.
Can anyone out there help me please.

Field and Table for PGI status updation

Hi All,
I want to know in which field and table the PGI status will get updated.
i.e. once we do the PGI for a delivery in which table will this PGI status gets updated.
Thanks in advance for help.
Harini

Hi Harini,
In Table VBUK you 3 different status related fields for sales documents.
Over all status field name GBSTK ( here it gives the total status of praticular sales document) here you see options
A Not yet processed      ( This means its complete open)
B Partially processed     ( This means the sales doc is partially processed)
C Completely processed ( This means the sales doc is completly processed)
Delivery status and over all delivery status field name LFSTK and LFGSK respectively, these 2 fields will be same always ( here it gives the total status of praticular sales document) here you see options
A Not yet processed      ( This means its completly open)
B Partially processed     ( This means the delivery doc is partially processed)
C Completely processed ( This means the delivery doc is completly processed)
So overall status can be different then delivery or overall delivery status.
If sales document has 100 quantity for 1 material, if delivery is done for 50 quantity.
Then over all status field name GBSTK will be B Partially processed and delivery and overall delivery will be C Completely processed .
Regards
vK

VF11 wrongly created with RV Doc type and with not clear status.

Hi All
Issue: There are 2 billing documents which were created(VF01) in March are canceled (VF11) in May. Cancel document is saved with a message (No automatic clearing of billing document XXXXXXXXX) and message diagnosis saying that u201CThe Automatic clearing of billing document and reversal is not possible. This may be, for example, because the line item update is deactivatedu201D
In the SD document flow cancel billing document is created and it's posted to accounting with Document type RV(which is not configured in the billing types) and it is in not clear status.
2 Sales order types are ZNRC(No Rebate u2013 Credit)    second is ZCR (CM Req With Refer).
Order Type : ZNRC , Billing type :ZG2, Cancel billing type :Z5, Accounting document in billing type for ZG2: is DG and accounting document in cancel billing type Z5 is :(_) blank.
Order type: ZCR Billing type :G2, Cancel billing type :S2, Accounting document in billing type for G2: is DG and accounting document in cancel billing type S2 is :(_) blank.
      FI document type Not maintained in the cancel billing type configuration because this should be determine by reversal document type DA which is maintained in DG document type from FI side. It will be triggered in VF11)
The above configuration is working with the order created VA01,billing VF01 and cancelling VF11 done in same period. If the order and billing done in old period and canceling(VF11) done in current period than FI document creating with RV document type and with not clear status in the document flow.
I reviewed similar issues with SAP Note and with below explanation:
          "There are 2 procedures that are possible when Vf11 is posted.
          Old Procedure - An FI "Reversal" document was created that was not connected with the orignal.
          New Procedure - A Real FI reversal was carried out with clearing."
In this case, our system is following with new procedure except above mentioned orders created in previous period and and canceled in current period.
My Questions are: How the RV document is getting triggered here? why the cancel document (Reversal FI Doc) is not clearing?
     Appreciate your answers or suggestions.
Thanks in advance,
Sunil
Edited by: Sunil kumar Matta on Jun 9, 2011 3:40 PM

Thank you Ivano.
I referred SAP note 1259505 and 339928. But initially we thought of none of the symptoms mentioned in the SAP note are matching with our issue. Then we contacted SAP online support and they suggested checking one SAP note (Mentioned above).
Our system is following new cancellation procedure, but itu2019s failing only for some few documents.
Finally we identified several reasons for the issue. One is profitability segment in the billing document and cancelled document is different due to some changes in segment assignments. Another one is consolidation- consolidation document does not exist in the billing document list but it is getting created in Canceled document (VF11).(Consolidation postings are switched off some time back and now itu2019s on)
After some discussions it is decided to include accounting document type (Reversal) in cancel billing types to avoid default RV document type in canceled billing document accounting document. And non-cleared documents need to be created manually in F-32.
Thread is closed.
Sunil

How long it takes to repair an Apple iPad with the error "sim card not detected". The ipad is in Apple since 19 January and still has the status "Repair in Progress".

How long it takes to repair an Apple iPad with the error "sim card not detected". The ipad is in Apple since 19 January and still has the status "Repair in Progress".

There is no way any fellow user here can know anything specific about your repair status. You will need to call Apple and ask them yourself.

Enabling Create New Query and Personalize in Check Status

Hi All,
We followed below steps Enable Create New Query and Personalize in Check Status
Go to the role of the user - PFCG - Authorizations - Change authorization data - Cross-application authorization objects - authorizations for Personal Object Work List (POWL) iViews
Specified the application ID POWL_APPID - SAPSRM_E_CHECKSTATUS
What should be done to enable define query and personalize for all users.
We have changed the following settings -
In activity POWL_CAT - '??' , POWL_LSEL-DISALLOWED - POWL_QUERY - ?? , POWL_RA_AL - ?? , POWL_TABLE - ??.
With our current settings Create New Query and Personalize in Check Status appear but are disabled (greyed out)
New Query Button appears but clicking on it produces no output.
Nikhil
Edited by: Nikhil Malvankar on Sep 12, 2011 5:57 AM

You could the following to check if the Query still exists in the database:
Open SQL Management Studio and connect to the SQL Server hosting the ConfigMgr database
In SQL Managemnt Studio, Expand Database, Expand CM_YourSiteCode
Expand tables and find the dbo.Queries table
Right-click the dbo.Queries table and select Select Top 1000 Rows
See if you can find your "ghost" Query
Please note - it IS NOT supported
to make direct changes to ConfigMgr database so I would properly call PSS on this one before you start getting creative.

How to find the Project and wbs Element System Status

Hi all,
How to find the Project and wbs Element System Status.
We can find the system status in the CJ20n transaction but I want the table and field name where it is stored.
Regards
Raghavendra

Hi,
try table <b>jest</b> with key = prps-objnr
Andreas

Data source and origin of ELM&status profile means

Hi SAP gurus
Data source and origin of ELM&status profile means ..

We did delete and recreate...

HT4211 I'm not able to download apps from App Store. It never downloads and it shows waiting status.can somebody please help me resolve this issue

I'm not able to download apps from App Store. It never downloads and it shows waiting status.can somebody please help me resolve this issue

I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
Try signing out of your account and restart your iPad.
Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again.

In 1 applications, e.g. Norton Virus Scan, and Macware DiskToolsPro, the status bar shows 100% but task is still running. Where it says x of y items complete, x is y. This also happens in Windows 7 with Bootcamp. Please explain.

In >1 applications, e.g. Norton Virus Scan, and Macware DiskToolsPro, the status bar sometimes shows 100% complete but task is still running. Under the status bar, where it says something like "x of y items complete," x is greater than y. This also happens in Windows 7 with Bootcamp. Why does this happen?

In >1 applications, e.g. Norton Virus Scan, and Macware DiskToolsPro, the status bar sometimes shows 100% complete but task is still running. Under the status bar, where it says something like "x of y items complete," x is greater than y. This also happens in Windows 7 with Bootcamp. Why does this happen?

Server 0 and Dispatcher are in status Starting Framework

Hi All,
This issue is mainly about Portal.
The Server 0 and Dispatcher are in status Starting Framework for a very long time..
The status does not change at all.
The dev_jrfc.trc under server 0 log does not get updated and the log directory also under server 0 does not get updated.
This is an issue in production system,so it would be of great help if some one could chip in soon.
P.S The ABAP part of the system is working fine.
Regards
Bharathwaj V

Hi Bharathwaj,
Sometimes the amount of memory of java stack is insufficient or not correctly managed by the application server.
This is a common problem and I have to take a time upon this issue several times !!!
First of all take a time to check this link http://help.sap.com/saphelp_nw70/helpdata/EN/a2/bb0a412a06f023e10000000a155106/frameset.htm it could be handful about the problem you are proving there.
Sometimes thee Java VM, which executes the instance bootstrap, is started by using the following log file
<DIR_INSTANCE>/work/std_bootstrap.out
The following problems may have been logged:
You must verify there some invalid Java VM parameter
like unrecognized option: <some option>
The option supplied in the bootstrap.JavaParameters property is not valid for the Java VM. Correct the property value and try again.
Try to manage the amout of memory of your JVM
Error occurred during initialization of VM
Incompatible initial and maximum heap sizes specified
The memory settings supplied in the bootstrap.JavaParameters and bootstrap.MaxHeapSize properties do not fit together (for example, MaxHeapSize is smaller than the initial heap size specified with u2013Xms).
Correct the property values and try again.

Performing check and potential update for status control table

Cheers Experts,
I searched in the forum, but I didn't find an answer.
I'm working on a 3.0B BW system.
After updating from PSA to an ODS, in the log I see the following line:
"Performing check and potential update for status control table" and double clicking on it, it says:
If data is loaded into an InfoCube, or existing data is edited (aggregated/compressed/deleted/got from a DataMart), then there is a change in the potential reportability of the data , or the possibility of deleting data by request, or of aggregating or compressing.
This status of each one of these Cubes is stored in a status table, that is updated when there is any change to the status of a request in the Cube.
The system now analyzes the requests in the Cube and compares the calculated status with the status table.
If deviations from the status table arise then you are given the option of adjusting the status table.
I have 2 questions:
1) What is BW doing, mainly because I'm working on an ODS and not an Infocube?
2) What can I do to reduce its execution time, since it lasts several minutes?
Thanks and greetings.
Roberto

Roberto, did you ever find an answer to your question? We also are experiencing long runtimes during this particular process running 3.x deltas from ODS to ODS and cubes.

Update the x plant material status and plant speific material status

HI Experts,
I am new to abap. In my requriment i want to update the status of x-plant material status (MSTAE) in MARA and
plant specific material status (MMSTA) in MARC. In master data the status of those fields is blank. Insted of balnk i have to upload '01' or '02'.
using BAPI_MATERIAL_SAVEDATA i am unable to upload. its not working.
is there any another way to upload that two plants status.
thanks in advance
sravan

Hi martin,
i think insted of it_*** (internal table) we have to use work area. please make sure conform this one.
i am giving my logic wat i have written and my requirement also...
The process to update material master data status is described in 'xxxxx' Mark and Release Cost Estimates and BAPu201D.
u2022     As a result of releasing a standard cost, certain master data elements need to be updated by the Cost accountant in order to enable further activities within SAP.
u2022     All material codes for which Cost Accounting has released a new standard cost, need to have their Material Status indicators changed from 02 (reviewed) to 03 (released). This removes the system blocks on certain activities within SAP like purchasing, production and Sales. The status will be needed to change in two views of the Material Master.
u2022     The u201CX-plant matl statusu201D field on the Basic Data 1 view
u2022     The u201CPlant-sp. matl statusu201C field on the Costing 1 view
This update should be automated
Select materials for which a price change document was posted based on selection parameters.
Select price change documents for company code defined in selection screen since last run date
u2022     Reference procedure = PRCHG (MLHD-AWTYP)
u2022     Entered on MLHD-CPUDT u2013 verify against last run date to include in selection
u2022     Entered at MLHD-CPUTM u2013 verify against last run date to include in selection
u2022     Store last run date and time by company code, so that it can be picked up in the next run. (store in table TVARVC?)
Select only the documents of plants which belong to the company code in table MLIT. The link between company code and plant can be found in table T001K.
u2022     Valuation area = Plant MLIT-BWKEY
u2022     Create a list of all materials MLIT-MATNR
The next 2 updates should happen independently;
u2022     Update the u201CPlant-sp. matl statusu201C field (MARC-MMSTA) on all plant views belonging to the company on the Costing 1 view to status 3 with as prerequisite;
u2022     The current plant material status is 02
u2022     This action must be done on all plants belonging to the company code
u2022     Update the u201CX-plant matl statusu201D field (MARA-MSTAE) on the Basic Data 1 view to status 3 with as prerequisite;
u2022     The current X-plant material status is 02.
in pt_final1 i get the data corresponing to given tables.
LOOP AT PT_FINAL1 INTO GS_FINAL1.
*HEADER DATA
GS_HEAD-MATERIAL = GS_FINAL1-MATNR.
GS_HEAD-IND_SECTOR = GS_FINAL1-MBRSH.
GS_HEAD-MATL_TYPE = GS_FINAL1-MTART.
GS_HEAD-BASIC_VIEW = 'X'.
GS_HEAD-COST_VIEW = 'X'.
APPEND GS_FINAL1 TO IT_FINAL1.
*CLIENTDATA
GS_CLNT-PUR_STATUS = GS_FINAL1-MSTAE.
GS_CLNTX-PUR_STATUS = 'X'.
*PLANT DATA
GS_PLNT-PLANT      = GS_FINAL1-WERKS.
GS_PLNT-PUR_STATUS = GS_FINAL1-MMSTA.
GS_PLNTX-PUR_STATUS = 'X'.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
    EXPORTING
      HEADDATA    = GS_HEAD
      CLIENTDATA = GS_CLNT
      CLIENTDATAX = GS_CLNTX
      PLANTDATA   = GS_PLNT
      PLANTDATAX = GS_PLNTX
    IMPORTING
      RETURN      = GS_RET.
    Commit to release the locks
   RETURN-TYPE is 'E' in case of error, else 'S'.
IF GS_RET-TYPE = 'E'.
    LOOP AT IT_RET.
      WRITE: / RETURNMES-MESSAGE.
    ENDLOOP.
ELSEIF GS_RET-TYPE = 'S'..
    WRITE: / 'PLANT MATERIAL STATUS '.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDLOOP.

Plant Specific and X-Plant Material Status

Hi,
Could anyone please answer the following:
1.What is the TCode to configure Plant Specific Material Status?
2.Would there be any conflict if both X-Plant Material Status and Plant Specific Material Status can be configured together? My client would like to Stop Manufacturing in one plant and keep others unblocked.
Thank you,
Sam

hi
1.What is the TCode to configure Plant Specific Material Status?
t code is OMS4 ,block the production tabs in the indicator
2.Would there be any conflict if both X-Plant Material Status and Plant Specific Material Status can be configured together? My client would like to Stop Manufacturing in one plant and keep others unblocked.
*if u want plant specific block then do not use this indicator in basic data 1 view ,use it in purchasing view *
select the material in mm02 with plant and store then in pur view material plant status give this indicator
regards
kunal
award if useful

Postion and priority field in status profile

Hi,
what is the use of POSITION and PRIORITYfield in user status customization?
Regards,
Rizwan

Hi
The position and priority field in user status is meant for the below determination
There are two types of status display:
Status line: Up to 8 active statuses are displayed in one line (only the 4-character status IDs).
The position specifies at which place in the status line a status should be displayed. If several active statuses have the same position, only the status with the highest priority is displayed. If not all positions of the status line are used, the positions are moved to the left.
Status overview: All active statuses (status IDs and description) are displayed in list form.
The status overview is sorted by position and priority.
Regards,
Deepa

U2018Holdingu2019 and u2018To be deliveredu2019 status in XI

Similar Messages

Maybe you are looking for