UCCX 8.0 in test Lab

Hello Folks,
I'm going to install UCCX 8.0 in a test lab and I'm wondering what hardware other are using?
I'm presuming that it needs ESXi4.0? Do you have to use the full production specification of 2 x vCPU and 4GB RAM? Or can you cut down the resources like you can for Call Manager in VMware?
All advice greatfully received!
LH

Hello fella,
Things are going pretty well at the moment. How about yourself?
I've not seen Daz for a little while now. He's still over at Azzuri though!
I've had a shot at installing UCCX into VMware Server 1.x and ESXi 3.5, but it keeps spitting out "The hardware you are using is not supported for this product". I've had a shot at opening the ISO to have a look at what version of VMware it's expecting, but all of the HWXXXX files in \Cisco\vendor seem to be blank and just show "NULL" or blank when I open them. Maybe that's why my hardware isn't supported if the file is knackered!
Did you do anything special and do you know if those files are ok on your copy of UCCX?
Hope you're not working too hard ;-)
LH

Similar Messages

Equipment for building test lab

Hello all,
I'm looking for a little input on the two options I'm weighing for building my virtual test lab. If at all possible, I would rather not have my daily PC running my virtual lab, but I leave that option open. I'm thinking of purchasing a Dell PowerEdge 2950 II
(from ebay), installing Windows Server 2008 R2, installing VM VirtualBox so that I can set up an Active Directory environment to prepare me for the MCITP exams. This option would allow me to conserve the resources of my daily PC. If I were to use my daily
PC (I7 quad, 3GB RAM, 80GB SSD, and 1TB storage with only 200GB of free space) I would more than likely have increase RAM and buy another HDD to store the VMs. How much more trouble would it be to go the PowerEdge 2950 II route?
Thanks.

Hi,
We recommend that you review the Windows Catalog to identify servers that are qualified for use with Hyper-V. You can identify systems that support the x64 architecture and
Hyper-V by searching the Windows Server catalog. Personal advice is you’d better to buy the 2950III
it’s the newer product.
More information:
Requirements and Limits for Virtual Machines and Hyper-V in Windows Server 2008 R2
http://technet.microsoft.com/en-us/library/ee405267(WS.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problem in test lab

Hi everyone,
Just describe what i faced with.
I solved to create CCR Exchange 2007 in my test lab, and faced with if i try to install these roles of exchange:
cas1 - cas/hub
mbx1, mbx2 - CCR MBXes
i got unwork configuration.
Test users cannot send an email to himself, and inboud emails stuck in "Queue" "CAS1\Unreachable\XXX".
But if i install all roles to cas1 and then create the cluster and migrate (or recreate mailboxes) all works find.
Unfortunatelly i cannot to solve that issue myself, i undesrtand that problem maybe in "routing group" or so on, but please show me right way if you know it. Thanks!

Hi
Are you running exchange 2007 with 2003 or 2010?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
I am sorry, yes i use 2007 SP3 version.

Is it possible to Publish Exchange 2010 behind TMG in Test Lab

Hi
I have Three Server 1 Domain 2 Exchange 2010 and TMG 2010 installed. All of these server installed on the virtual machine.
This is a test Lab. I trying to Publish OWA behind the TMG Internally. Is it possible? if yes how ?
I installed 2 NIC on TMG.

Yes.
See http://www.microsoft.com/en-us/download/details.aspx?id=8946 for instructions.
Hth, Anders Janson Enfo Zipper

Customizing email subject line in Test Lab

Hi All,
First ques:
I am wondering for system site administration access do we need an advanced license or enterprise dedicated license will aslo provide us access to use system site.
Second Question:
While sending an email from test lab using the email icon, it is showing default subject line can we customize this default subject. Also, how can we customize the format of email.
Thanks,
PS

Hello, and Welcome to the HP Support Community!
I have absolutely no idea what you are asking about, or which HP device you have...
How to Ask the Very Best Question and Get Results.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

After successful execution from test lab,status is showing as not completed

We need you help in resolving an ALM Issue.
After successful execution from test lab the Automatic Runner popup shows as the test execution status as "Passed" ,But after closing the Automatic Runner popup window the Tesl lab execution status is not updated and it shows as "not completed". Can you please look into this issue and provide the resolution...
We Would appreciate for your valuable support.
Before closing the Automatic Runner popup,Runner popupStatus:.
After closing the Automatic Runner popup window the Tesl lab execution status:

The issue was related to Note 959209

TEST LAB Guide: Demonstrating Certificate Key-based Renewal from Kurt Hudson updated 24 june 2013

Hi all,
We have been working since a full week building and rebuilding on different platforms this test lab and we have encountered a lot of different errors. (3 platforms are running)
One of our test lab went nearly up to the last point but we have been unable to get rid of the error : access denied by the remote end point when we test the certificate web enrolment. This error seems well known but not the solution and the reason why.
On two other similar Test labs we had errors with certificate invalid while asking the certificate Internet Server while it was the same as the one which was working above! This was strange as we used the clone of the certificate working on the previous
lab.
the other third error was below.....
We are sure that some of you have been able to get rid of these kind of errors so as to have a final lab running properly to be able to build POC on client's premises.
Kind regards
Gerard Dumazet
[email protected]
gd

Hi all
We have rebuilt a fourth TLG without using PowerShell and with only the GUI. Everything is working now.....
If anyone as an idea why, he will be welcome! It's not encouraging for using the scripts!
Gerard Dumazet
gd

VMware test lab tasks?

http://www.virtualizationadmin.comis a good place to start. The site has a lot of great information on your virtualization needs. Even has step by step instruction how to setup your first virtual machine.Check out the link below for info on VMware ESXi 5.5 with Ubuntu:http://www.virtualizationadmin.com/articles-tutorials/vmware-esx-and-vsphere-articles/installation-a...

Hey everybody, I'm new to virtualization and my boss got me set up on a test lab. He had me install it and then install Ubuntu. He's been pretty busy so getting new tasks has been tough. I'm sure I've seen some posts about this but can't find them. Looking for some ideas to get me started on learning this system and virtualization. I'm running VMware ESXi 5.5. If you know of another thread just point in the right direction, otherwise shoot me some ideas. Thanks in advance.
This topic first appeared in the Spiceworks Community

SCCM 2012 Test Lab Setup Questions...

Hi all,
I'm trying to set up a SCCM test lab with VMs so I can test deployment of our software package (.msi). I downloaded the System Center 2012: Configuration Manager Test Lab Guide, which appears to consist of the following required machine setups...
-One server running System Center 2012 Configuration Manager named CM1. CM1 uses the Windows Server 2008 R2 SP1 Enterprise Edition operating system.
-One pre-existing server running SQL Server 2008 R2 Enterprise named APP1. APP1 uses the Windows Server 2008 R2 SP1 Enterprise Edition operating system.
-One pre-existing client running on Windows 7 Ultimate Edition named CLIENT1.
From this document, the first step is to Complete the Base Configuration. When I download that document, it lists the following needed systems...
One computer running Windows Server 2008 R2 Enterprise Edition named
DC1 that is configured as an intranet domain controller, Domain Name System (DNS) server, Dynamic Host Configuration Protocol (DHCP) server, and an enterprise root certification authority
(CA).
One intranet member server running Windows Server 2008 R2 Enterprise Edition named
APP1 that is configured as a general application and web server with secure sockets layer (SSL) support. APP1 also hosts the certificate revocation list (CRL) for the enterprise root CA
installed on DC1.
One roaming member client computer running Windows 7 Enterprise or Ultimate named
CLIENT1.
One intranet member server running Windows Server 2008 R2 Enterprise Edition named EDGE1 that is configured as an Internet edge server.
One standalone server running Windows Server 2008 R2 Enterprise Edition named
INET1 that is configured as an Internet DNS server, web server, and DHCP server.
The Base Configuration test lab consists of two subnets that simulate the following:
The Internet, referred to as the Internet subnet (131.107.0.0/24).
An intranet, referred to as the Corpnet subnet (10.0.0.0/24), separated from the Internet subnet by EDGE1.
My question(s)... How many separate VMs are required to set up the test lab, 7? Or are APP1 & CLIENT1 the same system for both setup guides, which I guess would bring the total of needed systems/vms to 5?
Can any of the images serve a dual purpose to lessen the number needed even further?
Any information would be greatly appreciated!
THANKS IN ADVANCE!!

There's no correct answer here as ConfigMgr itself can run on a single server or its roles can be spread out to many different servers. Ultimately, in a pure lab, there is rarely a reason to use more than a single server unless you are trying to simulate
a production deployment where the roles have been separated.
This single server doesn't include a DC though (as the ConfigMgr site server must be a member of an AD domain) or a client to manage though so that brings the total up to 3. You technically could put the ConfigMgr site server on the DC; however, that
is rarely done in production and cause a few unique configuration issues. You could also treat the DC as your managed client but that's typically not a great use case for testing client management.
I have no idea what lab guide you are following, but remember the lab guide is set up to walk you through many different scenarios -- some of which you many not care about. ConfigMgr is a huge and complex application that can be installed in many, many different
configurations based upon the goals of the installation and the organization it supports so it ultimately depends upon exactly what you are after. I'd suggested doing some additional supplemental reading like TechNet and/or one of the publishes books
available instead of just blindly following the lab guide. That's not to say the lab guide doesn't have value, but if you want to follow it, then you need to follow it.
Jason | http://blog.configmgrftw.com | @jasonsandys

Howto setup a simple network in SCVMM 2012 R2 and HyperV for test-Lab /Private Cloud

Howto setup a simple network in SCVMM 2012 R2 and HyperV for test-Lab /Private Cloud
I have domain controller on my laptop (i5 core 8gb) en one hyperV machine running also scvmm 2012 r2 on it. (i3 core 16gb)
both runung windows server 2012 r2 x64 on it.
I want to install a easy "Test Lab" for Scvmm 2012 r2 and hyper-V r2 for mine Private cloud exams. (70-246 & 70-247).
howto arrange networking and clustering for this mine network and cluster is 192.168.1.0/24.
ThanX anyway!!

Also, I have tried to redeploy other test VM networks, VMs, and the PA Network itself and it still doesn't work.
Any ideas?

Where To Download Base Configuration ISO(s) For Test Labs?

Hi.
Is there somewhere that I can download an ISO for the base configuration for the Test Labs outlined here:
http://social.technet.microsoft.com/wiki/contents/articles/1262.test-lab-guides.aspx#Base_Configuration_TLG
Or is it presumed that the reader of the Test Lab Guides will configure each machine themselves? If so, why is this not communicated clearly in the Test Lab guides?

Hi,
Test Lab Guides is to let you use less to learn a new technology, product or an entire multi-tier solution, TLG provides you with step-by-step instructions to create the Base Configuration test lab. You could build test labs based on other
TLGs from Microsoft and published in the TechNet Wiki, perform TLG extensions, or create a test lab of your own design that can include Microsoft or non-Microsoft products.
For more frequently asked questions about Microsoft TLG:
http://social.technet.microsoft.com/wiki/contents/articles/2477.test-lab-guides-faq.aspx
Regards,
Rebecca Tu
TechNet Community Support

D/l f'fox 4,..now can only get test lab when click icon,..!!! cannot clear it

began work on HSBC account,...thru f'fox browser,...notice that 2 pages were activating,....cleared from HSBC,...clokced f'fox icon,...and got HSBC main page,...no matter what I did could not get f'fox as default page,...so,...cleared f'fox and re'downloaded now,...can only get a test lab blank page,...!!!

There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
The latest official version that works on OS X 10.4 and PPC Macs is Firefox 3.6.16 available from http://www.mozilla.com/en-US/firefox/all-older.html

Quality center Test lab retriving test instance comments using vb script

Actually i need to pull Test lab ->test instance comments for each test cases.
Can anyone help on retriving Test instance comments.

Tushar,
I believe this forum intends to address questions related to Oracle Provider for OLEDB.
regards
Jagriti
OTN Team @ IDC

DSL test lab w/ WIC-1ADSL

Hi folks,
I regularly configure Cisco 800-series routers for field deployment, and I'd love to be able to run through some simulations on the 8x7 ADSL series (837 and 877) in my test lab. I also have a few WIC-1ADSL modules for my 2600/2800 routers.
I know that you can do back-to-back configurations with GHDSL wics, but it doesn't seem to be possible with the internal ADSL modems on the 800's and/or the WIC-1ADSL's.
Can someone please point me in the right direction? I'm looking for the easiest & cheapest way to connect two 8x7's to each other via the ADSL (RJ-11) port, and/or to a WIC-1ADSL.
I'm not necessarily interested in recreating/simulating an entire service-provider infrastructure (yet ;-), my initial goal is just straight connectivity. I'm /not/ familiar with ATM switch or DSLAM specs or configuration, but I'm willing to learn, however I can't spend days and days bringing myself up to speed. Again, getting the connectivity between the CPE devices is primary; the guts of DSL and any required jury-rigging are secondary.
Thanks!

The Cisco 850 series and Cisco 870 series routers support the dial backup function, which allows a user to connect an analog modem to the console port as a backup link to the WAN port in case the ADSL service goes down. Refer URL http://cisco.com/en/US/products/hw/routers/ps380/products_installation_guide_chapter09186a0080471067.html#wp1055766

Connect Test LAB to Production Network

I have a lab in a remote location, which is, as of now, accesible via console router. I want to connect this to production network, so that i am able to access without the console router. The physical setup would be like
Core --- Distribution ---- AccessSwitch---TestLAB (couple of switch connected to each other)
My concern: if i play in my test lab, there are chances that the broadcasts and STP floods might cripple my production network.
pelase suggest what precautions should i take?

I did a similar thing a while back and I used a firewall to connect to the lab.
So the outside interface of the firewall faced the lab and the inside faced production.
I used a completely different private IP range for the lab and because I didn't want those IPs in the production routing tables I used NAT on the firewall to translate the lab IPs into a spare IP subnet available in production.
You should definitely look to isolate your lab so that nay mistakes are not passed to production.
I wouldn't connect the lab to production with a L2 link because of STP, VTP etc. If you can't go the whole way of a firewall then you should look to use a L3 link if your lab switch supports it.
In addition using a separate VRF for your lab environment would be a good idea so any mistakes if you are playing around with the routing etc. does not affect the global production routing tables.
Jon

UCCX 8.0 in test Lab

Similar Messages

Maybe you are looking for