Ucs 6248 HA cluster can not login

Question

6248-A manager ip1.1.1.2
6248-B manager ip1.1.1.3
cluster VIP 1.1.1.1
cisco6248-A# show cluster extended-state
Cluster Id: 0xd59a70527a4111e2-0x8b74547feebbcd64
Start time: Sat Feb 23 12:44:03 2013
Last election time: Sat Feb 23 12:55:11 2013
A: UP, PRIMARY
B: UP, SUBORDINATE
A: memb state UP, lead state PRIMARY, mgmt services state: UP
B: memb state UP, lead state SUBORDINATE, mgmt services state: UP
   heartbeat state PRIMARY_OK
INTERNAL NETWORK INTERFACES:
eth1, UP
eth2, UP
HA READY
Detailed state of the device selected for HA storage:
Chassis 1, serial: FOX1618GW6D, state: active
Chassis 2, serial: FOX1625GAB0, state: active
Chassis 3, serial: FOX1613G1LV, state: active
MY PC IP 1.1.1.10 can ping all 1.1.1.1/2/3.and https all
but when i reload 6248-A ,can not ping 1.1.1.1,but can ping 1.1.1.3.
also can not https://1.1.1.1  (login error:failed login info:ucsm is not available on secondary node)
when 6248A reload ok,can ping 1.1.1.1/2/3,and https all
if fi6248 cluster is not ok?

Answer 1

Hello,
When you reload FI-A ( active primary ) , virtual IP is owned by FI-B, and should be become primary. Once it becomes primary, you should be able to access UCSM or SSH into FI via Virtual IP address ( 1.1.1.1 ).
1) How are these FI mgmt ports connected to upstream switch / L3 gateway ?
2) Are you able to SSH into FI-B with 1.1.1.1 ( when FI-A is reloading ) ?
3) Have you configured any mgmt interface monitoring policy ?
http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_0101010.html#d75788e1551a1635
Padma