UDDI connection via JDeveloper

Hi All.
We just installed the Oracle's UDDI on our Oracle 10.3 appserver, and I've loaded a few WSDL's there just as a test. Made the connection to the UDDI server via JDeveloper, (10.1.3.3/4) but what I'm missing is a way to save the UDDI's username/password so that I don't have to type it in for every single WSDL it retrieves when doing a search via JDev. Is there a setting on the UDDI itself that I can set to make the WSDL publicly searchable? We basically just want to document all our WS's in one central place and UDDI seems to be the answer for this, but if you can't search it from JDeveloper, then it loses a lot of its value for us.
Any ideas/thought/wild musings would be most helpfull.
Regards
Elmar

I presume the TP Link powerlink is a powerline adaptor?
The first thing to try is a factory reset of the homehub by pressing a pin into the recess button on the rear for about 20 seconds and if the powerline adaptors have a reset button, reset them.
It is also best not to have the powerline adaptors sharing a double electric socket with the computer.

Similar Messages

ESB Server connection could not be established via Jdeveloper or using ant

When I try to deploy a ESB project using ant in a remote virtual linux machine
via command mode,I am getting deployment failed message as below suggesting to check whether ESB server is running.
./ant outputs the following:
Buildfile: build.xml
deployProjects:
[echo] deploying esb project files
[deployESBProjects] Deployment Failed ...Check if server at 132.146.44.93 is running
[deployESBProjects] ESB Project </data/ESB_Samples/CPL_US_001> successfully deployed
[echo] esb project files deployed
BUILD SUCCESSFUL
Total time: 0 seconds
./opmnctl status -l oututs the following:
Processes in Instance: SOA_NFT.RHEL4AS
-------------------------------------------------------------------------------------------------------+------
ias-component | process-type | pid | status | uid | mused | uptime | ports
-------------------------------------------------------------------------------------------------------+------
OC4JGroup:default_group | OC4J:home | 1051 | Alive | 1610238535 |3616 | 20:41:30 | jms:12601,http:8888,rmis:12701,rmi:12401
ASG | ASG | N/A | Down | N/A | N/A | N/A | N/A
HTTP_Server | HTTP_Server | 1050 | Alive | 1610238534 |1820 | 20:41:20 | https1:4443,http2:7200,http1:7777
./opmnctl status -app outputs the following:
Applications in Instance: SOA_NFT.RHEL4AS
application type: OC4J
pid | name | state | rtid | classification | routable | parent
1051 | hw_services | started | g_rt_id | internal-BPEL | true | orabpel
1051 | ruleauthor | started | g_rt_id | internal-Rules | true | default
1051 | system | started | g_rt_id | external | true |
1051 | WSIL-App | started | g_rt_id | internal | true | default
1051 | orainfra | started | g_rt_id | internal | true | default
1051 | datatags | started | g_rt_id | internal | true | default
1051 | orabpel | started | g_rt_id | internal-BPEL | true | default
1051 | gateway | started | g_rt_id | internal-WSM | true | default
1051 | rulehelp | started | g_rt_id | internal-Rules | true | default
1051 | ccore | started | g_rt_id | internal-WSM | true | default
1051 | policymanager | started | g_rt_id | internal-WSM | true | default
1051 | default | started | g_rt_id | external | true | system
1051 | esb-rt | started | g_rt_id | internal-ESB | true | esb-dt
1051 | ascontrol | started | g_rt_id | external | true | system
1051 | coreman | started | g_rt_id | internal-WSM | true | default
1051 | esb-dt | started | g_rt_id | internal-ESB | true | default
1051 | javasso | started | g_rt_id | internal | true | default
Also when I try to create Appliocation Server connection using opmn port 6003 from my local Jdeveloper,the test connection fails.
While creating Application Server connection in Jdeveloper, the connection Test succeeds when I select Standalone server and
using RMI port 12401.Maenwhile, the Integration Server connection using the above Application Server connection created and port 8888 when tested
displays
Application Server: OK
BPEL Process Manager Server: OK
ESB Server: FAILED
ESB Server failue detail: ESB connection failed.
ESB Server connection could not be established.
The SOA was installed in silent mode after resolving many issues detailed in SR 6622260.992

Can you try changing the port to 80 while creating connection.

Unable to to deploying a BPEL Process via JDeveloper 10.1.3.5

Hi,
We try to deploye BPEL Process via JDeveloper and we got an error. This is a production error:
RollbackException
Timed out
An unexpected error has occurred while executing your request. This is most likely related to a defect in the Oracle BPEL Process Manager product. We apologize you can post the error to the OTN forum and we will get back to you as soon as possible.
Build Information:
Oracle BPEL Server version 10.1.3.5.0
Build: 0
Build time: Tue Aug 10 00:59:06 PDT 2010
Build type: release
Source tag: PCBPEL_10.1.3.6.0_GENERIC_100810.0003.2425
Exception Trace:
com.evermind.server.ApplicationServerTransaction.checkForRollbackOnlyWhileInCommit ApplicationServerTransaction.java@664
com.evermind.server.ApplicationServerTransaction.doCommit ApplicationServerTransaction.java@273
com.evermind.server.ApplicationServerTransaction.commit ApplicationServerTransaction.java@162
com.evermind.server.ApplicationServerTransactionManager.commit ApplicationServerTransactionManager.java@475
com.evermind.server.ejb.EJBTransactionManager.end EJBTransactionManager.java@137
com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke TxRequiredInterceptor.java@57
com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed InvocationContextImpl.java@119
com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke DMSInterceptor.java@52
com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed InvocationContextImpl.java@119
com.evermind.server.ejb.InvocationContextPool.invoke InvocationContextPool.java@55
com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod StatelessSessionEJBObject.java@87
ProcessManagerBean_RemoteProxy_4bin6i8.getMetaData
com.oracle.bpel.client.BPELProcessHandle.getMetaData BPELProcessHandle.java@237
ngProcessList.jspService _ngProcessList.java@113
com.collaxa.cube.fe.JspPage.service JspPage.java@42
javax.servlet.http.HttpServlet.service HttpServlet.java@856
oracle.jsp.runtimev2.JspPageTable.service JspPageTable.java@473
oracle.jsp.runtimev2.JspServlet.internalService JspServlet.java@594
oracle.jsp.runtimev2.JspServlet.service JspServlet.java@518
javax.servlet.http.HttpServlet.service HttpServlet.java@856
com.evermind.server.http.ResourceFilterChain.doFilter ResourceFilterChain.java@64
oracle.security.jazn.oc4j.JAZNFilter$1.run JAZNFilter.java@400
java.security.AccessController.doPrivileged
javax.security.auth.Subject.doAsPrivileged Subject.java@517
oracle.security.jazn.oc4j.JAZNFilter.doFilter JAZNFilter.java@414
com.evermind.server.http.ServletRequestDispatcher.invoke ServletRequestDispatcher.java@644
com.evermind.server.http.ServletRequestDispatcher.unprivileged_include ServletRequestDispatcher.java@177
com.evermind.server.http.ServletRequestDispatcher.access$000 ServletRequestDispatcher.java@68
com.evermind.server.http.ServletRequestDispatcher$1.oc4jRun ServletRequestDispatcher.java@114
oracle.oc4j.security.OC4JSecurity.doPrivileged OC4JSecurity.java@284
com.evermind.server.http.ServletRequestDispatcher.include ServletRequestDispatcher.java@119
com.evermind.server.http.EvermindPageContext.include EvermindPageContext.java@456
Thanks for helpping

It says you're missing the oracle.lite.poljdbc.POLJDBCDriver class which belongs to the Oracle Lite database.
For some reason it is configured in your data-sources.xml, either in config/data-sources.xml or in applications/<your_app_name>/META-INF/data-sources.xml or in your JDev Connections.
Find this configuration and determine whether you need it. If not, remove it.
--olaf

Deploy via Jdeveloper, error when role is "ascontrol_appadmin"

Hi,
We would like developers to deploy their work (BPEL) via JDeveloper, but
given the role of "ascontrol_appadmin" they are unable to make a
connection to the application/integration server?.
Thank you for any comments/suggestions.
Mark

I've been meaning to ask that, I bet you've found they can upload a BPEL suitcase file through BPEL console but cannot make the link from JDev ?
My system admin gave my user more privs than bpeladmin as a test and it still doesn't work, here is what I see in App Server Control :
Me:
BPMWorkflowSuspend, BPMSystemAdmin, BPMWorkflowReassign, ascontrol_appadmin, oc4j-administrators, ascontrol_monitor, BPMAnalyst, BPMDefaultDomainAdmin, rule-administrators, BPMWorkflowViewHistory, ascontrol_admin, BPMWorkflowAdmin
bpeladmin:
BPMWorkflowSuspend, BPMSystemAdmin, BPMWorkflowReassign, BPMDefaultDomainAdmin, BPMAnalyst, BPMWorkflowViewHistory, rule-administrators, BPMWorkflowAdmin
Note: bpeladmin does not have ascontrol_appadmin role.

Powerbook G4 can't connect via ethernet but connects via airport

We have a small office network connected to an Efficient Networks DSL router that's managed by our isp. The router has 4 ports and a linksys 8 port switch is connected to one of those ports. Another D-Link wireless router/switch is connected to another port.
2 i-macs connect without problem via ethernet cable. They are set to DHCP and get 192.xx private addresses. Both run 10.4.5. Another older imac running 9.2.2. also has no problems.
I recently purchased a powerbook G4 and it will not connect via ethernet to the Efficient networks router. At first it was connected to the linksys, so decided to connect it direct to the Efficient Networks router. With DHCP, it acquires a 169. internet address which is self generated (i.e. no real connection). I tried to give it a static private address (talking to the isp provider). They could see the powerbook but saw all zero's (presumable mac address). By the way the Powerbook works perfectly at home connected via ethernet cable to a D-Link router connected to a cable modem so it's not a physical problem. I even checked the ethernet cable I used in the office with another computer - no problem.
When I switch to airport in the office, the powerbook connects to the network and the internet. I get some strange warning messages showing the server's and the router's private ip addresses. I click ok, and the powerbook finds an unassigned private ip address. It's the only way it will work, but it causes problems, because I can't connect to one of the network printers. Speed also isn't great.
Can anyone give me advise how to proceed. I am no expert on this stuff so keep it as simple as possible.
Tks

Tim,
Thanks for your help. Here's what I've done before reading your e-mail. The D-Link DI-524 wireless router is connected to the Effiicent Neworks DSL router as you mentioned. One ethernet port of the EFF.Net. router is connected to the WAN port of the DI-514.
Because I have a D-Link router at home which works flawlessly with my powerbook, I decided to connect the ethernet cable of the powerbook to the D-Link which has 4 ethernet ports. Lo and behold, the powerbook acquired a private ip address and connected to the LAN and internet!
When I connected the powerbook direct to the Efficient Networks router, it could not communicate. I believe that there must be some software incompatibility between the powerbook and the Efficient Networks router. By connecting to the D-Link, the D-Link assigned an ip address to the powerbook, and it could connect to the server, lan, etc..
Only problem is that I have a Brother network printer that cannot connect to the powerbook. My powerbook cannot find it on the network. Because there is a linksys switch connected to the efficient networks router's third ethernet port, maybe as you said, going through the D-Link via DHCP (when the Linksys is also acting as a DHCP server, might cause this type of problem. What do you think?
As a final note, other imac G5's connected to the linksys switch (which then connects to the Efficient Network's router) have no problem connecting to the lan or internet and have no problem connecting to any of the printers. When I put the powerbook on that switch, I could not connect to the internet - i.e. whether connecting via the lynksys switch or direct with the efficient networks router - same results: no internet connection whether manually or via DHCP.
So the imac G5 has no problem with the efficient networks router but the powerbook G4 hits a brick wall. The G4 likes the D-Link router. I am concerned (and I will have to check this) that if I turn off the dhcp server feature from the D-Link, that whatever software issue crops up between the powerbook and the Efficient Networks router, will rise up again, because the D-Link will act like a simple switch (just like my linksys switch), and we'll be back to square zero. In any case, no harm in trying. This may be the cause of the Powerbook not seeing that Brother printer (even though it sees another printer and other macs).
Having spent hours reading about network problems, I think it's safe to say that macs have problems with certain routers. Why a G5 works and a powerbook G4 doesn't is beyond me, but clearly software must play a role.

When iPhone 5s is connected via USB no audio is heard

Hi There -
I've seen older threads on this issue but I don't think I've really come across any solutions. My issue started yesterday; now before reading further I have to ask that you please keep in mind that I did perform the latest upgrade on my iPhone a bit earlier in the day.
When I connect my iPhone to my vehicle sync system and announce that I'd like to connect via USB, the voice recognition repeats my request and then the music on my iPhone shows to be playing on the display in my vehicle. The problem is that though the music appears to be playing and the minutes played are being displayed there is no audio coming through. When I switch to the Bluetooth Audio option all sound comes through.
Now, as a 2nd test, we connected my sons iPhone 5s via USB (he has not taken the latest update on his iPhone) and the same issue happens with his. Voice recognition changes to the USB format as requested, music appears to be playing but no audio is heard. When we change his phone to Bluetooth Audio the audio comes through nice and clear.
I'm not entirely convinced the update caused the issue so I wanted to put this out there to see if anyone has run into this and were able to actually resolve the issue.
I know the USB cable is working fine because when I do plug it into either phone the phone makes the little connection sound and pops up a brief battery percentage box. I also know the cable is working because when we announce USB as our audio of choice the system recognize USB via the iPhone.
One other thing I tried looking for was the option on the phone to switch from Docked to Synch - I know on my iPhone 4 I was able to switch back and forth through iTunes and would also have the option if I tried to watch anything via You Tube when connected to the dock; I cannot find this anywhere on the 5s when connected via USB.
Help is greatly appreciated!!!

I have had similar troubles with wifi.. some improvement removing BlackBerry desktop software & drivers & reinstalling after reboot... I used the same installer I had previously, but a fresh downloaded installer couldn't hurt...
10.3.1 SW .1779 OS .2726 WLAN .1.1 Radio .2727

IIOP connection from JDeveloper does not work

I'm trying to run some sample EJB programs but cannot connect to the IIOP port from JDeveloper. I have installed Oracle 8.1.7 Enterprise on my machine, and it includes a listening location for IIOP on port 2481 under the listener. I can connect to JServer on this database from DBA Studio using various user/passwords, so the IIOP connection seems to work in principle.
But when I try to set up an IIOP connection from JDeveloper (v.3.1.1.2), the "Test" button fails to connect, but does not give any details on the reason for the error.
I have tried using the command line utility sess_sh, but this fails telling me the URL is invalid, even though it is exactly the same as the URL I connected to in DBA Studio.
Why can I connect from DBA Studio but not from JDeveloper, and can anyone tell me how to get this connection to work?
(It shouldn't be this hard to get a simple "Hello world" EJB to work!)
Thanks,
Chris

You must use Jdev 3.2.x to communicate with RDBMS 8.1.7.
Jdev 3.1.x.x is for RDBMS 8.1.6.

The iTune Remote App has stopped finding my iTunes library when connected to wifi from my main router, but works fine when connected via second wifi router on the same network (different SSID)

I'm running iTunes Remote App from a couple of iPhone 5's and a first generation iPod Touch. iTunes is running on a PC - Windows 7. My home network runs two Wifi Routers, each with a different SSID. I've had no problems with the Remote app running this set up for the last 8 months but recently the App can only find my iTunes library when the iPhone/iPod is connected via one specific router, when connected to the network via the other router, no iTunes library is found. I'm also running an Apple TV and it's the same as the iTunes Library, only visible via the one SSID.
Everything else seems to work fine when connected via either router, eg Internet on the iPhones (definitely via wifi)
I've tried renewing the lease on the iPhone wifi connection, restarting everything.....several times.....
It used to work fine, this only seems to have been a problem in recent weeks
Any help or advice would be much appreciated
Thanks
Ian

It turned out to be the firewall settings on our router. Her machine was sending traffic that our router interpreted as a DoS attack and blacklisted her Airport's MAC address. That's why it would work fine if she switched to Ethernet.

My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either.

My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either. I get an error message with multiple suggestions but none of them apply to my situation.
I am so dissatisfied with this printer. I'm sorry I got it from Amazon because now it is a hassle to return it. I will never buy another Canon.
The printer menus are confusing. I hate using it. I loved my previous Canon which finally stopped working after many years, that's why I purchased a newer Canon model. Never again. Stick with cameras.
Marcy Hotz

This note won't be as angry and frustrated as the last one...
Because I still had my old printer drivers and other applications on my hard drive, I think the application was trying to connect with the old printer. I deleted all the old stuff.
I also had several scanning applications on my drive which just confused me.
When I used the actual Canon MX922 application, I was able to scan but could only save as JPG, TIF or BMP (and one more, I forget which). So I did some research on the Canon site and found out how to save documents as PDF files using the Canon IJ Scan Utility.
It works now. So I'm satisfied, will keep this maching. I just had to take some time, sit down and focus on the problem.

Issues with BAM Connection in JDeveloper

I have issue with Jdeveloper BAM connection.
After BAM & OiD configuration, I can't test BAM connection in Jdeveloper. Jdev reports BAM configuration error.

I've created new one.
Actually, I have to return to Windows auth, cause cust should make report develoopment.
Could you provide any information how BAM connection shold be connfigured? I'll make next try.

Internet connection via Airport Extreme/router thats not working, why?

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

Question regarding ONT connection via Ethernet and Cable cards

Hi,
We recently upgraded to Fios Quation 150Mbps/65 plan. We are not getting the advertised speeds (we only get like 5mbps upload) so verizon is sending a tech to switch the ONT connection from coax to ethernet.
I have 2 questions regarding this new setup:
1. If the ONT communicates with the Fios Actiontect router via ethernet instead of coax from now on, How will the set top boxes and Tivo-esque cable card powered device I currently have connected to coax, talk to the verizon system from now on, if coax is taken out of the equation? Will fios signal still flow through the internal coax wiring of the house? And moreover, I was under the impression that coax was the way set top boxes communicated and derived independent ip addresses from the Fios router, for on deman purposes and what not. How will this work from now on?
Quiestion 2.
Right next to the wall where the ONT sits, theres's a basement office where we have a PC that connects to the Fios system via an Actiontect MoCa adapter (ECB2500C) which I assume derives it internet connection from the Fios Actiontec router which sits upstairs in the living room.
Again, with the Coax about to be disabled next Friday in favor of ethernet connection from the ONT, I assume this PC will be left without internet because of the lack of internet signal in the coax? Is this correct?
Question 2.5 If my above assumption is correct, since this office is right on the other side of the wall where the ONT sits outside the house, would it be possible to run an ethernet wire through the wall that connects straight from the ONT to an ethernet switch inside the office, from which I would derive a connection for this basement PC (properly firewalled of course) and then, from said switch, continue running the ethernet wire that would ultimately reach the Actiontec Fios router upstairs from which the rest of the house derives it's internet? and would this setup affect in any way the propper functioning of the cable boxes in the house?
I'd appreciate your input and any help you can provide so I can have a ballpark idea of what to tell the Fios guy to do when he comes on Friday.
Cheers.
Solved!
Go to Solution.

It's not valid to have two devices connected to the ONT, PC and VZ Router. Must be a single device. The ONT locks onto the MAC Address of the first device it sees. Since you have TV you should have the VZ router as the internet facing router.
Other options:
1. Have the VZ Router located next to the PC in the basement and then use Wireless for all other PC's.
2. Have the VZ Router located next to the PC in the basement but run one wire upstairs and connect a switch where other PCs and devices can connect via a wire.
Hope that helps.

TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon.

My connection via hdmi to my TV is no longer working. Even if I use a thunderbolt to hdmi converter

Hi, the day before yesterday I turned on my tv which was connected via HDMI out on the mac mini to HDMI in on my TV. Everything was working fine, however I have been trying to set up dual monitoring on another monitor using an HDMI to VGA adapter to my second monitor but nothing was working. I was about to watch a film from the mac to the TV wen I thought it might be the resolution on the hdmi out why it wasn't working on the monitor but was on the TV so I changed the settings and the hdmi to the TV cut out. My main monitor is connected by thunderbolt to VGA adapter and works fine. I can change all the settings for screen resolution on the main monitor and have tried every setting on it then unplugging and plugging in the hdmi cable from the mac to the TV. I get the blue flash on the screen so I know it is being detected but here is where it gets weird.
I figured I would try the thunderbolt to HDMI converter I originally bought for my iMac and again the blue screen flashes up but there is no blue flash or any sort of detection on the TV.
The whole time there is nothing showing up on the screen, even when I unplug my main display from thunderbolt to VGA (the main monitor) and connect the thunderbolt to hdmi adapter and plug in the hdmi to the TV.
I know it's not the hdmi cable as I have tested it on my youview box to my tv and it worked fine.
I also know its not the tv as iv connected my friends windows laptop to the TV using the same cable so it must be the settings on the mac.
I have tried doing a time machine restore to the day I bought it and have had no problems so far until I changed the settings. Why oh why did I mess about with it!!
If anyone can help please let me know ASAP.
It doesn't show up the HDMI output in audio anymore either, however like I say it flashes blue wen I connect the hdmi but seems to have no idea that the HDMI is connected in the display settings! It's so frustrating. I'm going to call the mac support today but if anyone on here hash as any similar problems n fixed them please let me know.
Btw I'm running Mac OS X 10.8.4. I know I can connect via a long VGA cable but that's not really the point. I, at least would like to get my mirrored desktop on my tv back from HDMI!

Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via minidisplay port. Anybody knows how to fix this?

When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via the minidisplay port. Anybody knows how to fix this?

Was just on the phone with Apple about this.
The solution was as follows for me anyway...
Go to your Finder
Choose the Go Menu
Choose Computer
Choose your Macintosh Hard Drive
Choose your "Library" Folder
Choose the "Preferences" Folder
There should be a folder called "Audio"
Move that whole folder to the trash
Empty the Trash
Restart from the Apple Menu
When you are back up and running;
     Choose System Preferences from the Apple Menu
     Choose Sound
      In the output tab you should now be able to make the HDMI "Sticky"
      Enjoy your sound over HDMI and no more dirty knees or broken backs unplugging the desktop speakers!
Mac Mini 2011 2.5Ghz 8 GB of RAM - Planar 17" VGA via display port adapter and Samsung 26" LCD TV via HDMI

UDDI connection via JDeveloper

Similar Messages

Maybe you are looking for