UDESEncrypt Errors when using the JAVA engine (NW IDM 7.0)
Folks,
I'm seeing an error when I use the uDESEncrypt function with the Java Engine in NW IDM SP2 Patch 3.
The error I am getting is:
runFunctionsInString($FUNCTION.encrPWD()$$) got exception
org.mozilla.javascript.EvaluatorException: uDESEncrypt: Key should be exactly 24 bytes long.
The code calling it is:
// Main function: encrPWD
function encrPWD(Par){
//Example calling DSE internal function
//UserFunc.uStop("Terminated by user");
key = "C:\Program Files\SAP\IdM\Workflow\configs\KEY\keys.ini";
OutString = UserFunc.uDESEncrypt(key, Par);
return OutString;
I have also seen this error when using Patch 4.
Interestingly enough, the error does not occur when using the Windows Engine. Anyone else seeing this?
Thanks,
Matt
Hi Matthew,
Try to replace the '\' with '
key = "C:
Program Files
SAP
IdM
Workflow
configs
KEY
keys.ini";
Alternative approaches,
1) setting key empty and it will look into %DSE_HOME%\KEY\key.ini
which should be C:\Program Files\SAP\IdM\Identity Center\Key\key.ini on default installation path.
2) or setting the key to something like = 6D5A2AF59B1CDD7F9592484F178331C891537A3F9B91D362
a 24 byte key...
Also when using DES you should ensure that in Identity Center underneath Options/General
you have encryption algorithm set to 3DES.
Normally if you intend to use this for password provisioning in IC you would also
on the identity store (for instance 'Enterprise people') underneath 'password policy' check
of for 'enable password provisioning.'
By doing so the MX_ENCRYPTED_PASSWORD with be set when operating through
workflow (3DES encryption version of the MX_PASSWORD) which allows you to obtain password
when provisioning to other target systems...
Similar Messages
-
ORA-03113 error when running the Java stored proc demos
Hi there,
Has anyone else run into this issue. When attempting to transfer an object type from Java to Oracle - through a Java stored proc - the session crashes with:
ORA-03113: end-of-file on communication channelLooking in the trace file generated the error message looks something like:
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [0x8fe04468] [SIGTRAP] [unknown code] [0x8FE59034] [] []
Current SQL statement for this session:
select pointruntime.jdistance(point(1, 2), point(2, 3)) from dual
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
ksedmp+764 call ksedst 0 ? 2C4F4A ? 2C ? 98968000 ?
DB02C ? 27A50000 ?
ssexhd+956 call ksedmp 3 ? 0 ? 8FE5E790 ? 5905870 ?
8FE0434C ? 40895E4 ?
0x9012c860 call ssexhd 5 ? BFFEEF70 ? BFFEEFB0 ? 0 ?
0 ? 0 ?As you can see from the trace snippet above, I was attempting to run one of the Oracle Java stored procedure demos. Has anyone successfully run those demos? Specifically the ones where complex types (table objects or the Point object) are passed back to Oracle from the JVM.
I would appreciate some help with this. The code works fine in a Windows or Solaris environment but barfs on Apple. Truly annoying....
Anyone?
Thanks in advance,
AlexYes,
Apologies for not stating that information, Steve. Was a bit naughty of me! I guess the reason I didn't was because I just wanted to hear if anyone else running Oracle on Mac received such errors when executing the Java stored proc demos (specifically, the execution of PointRuntime.jDistance). Nevertheless, here's the relevant info from the trace file:
Dump file /Users/oracle/admin/sandbox/udump/sandbox_ora_1861.trc
Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
With the Partitioning, Oracle Label Security, OLAP and Data Mining Scoring Engine options
ORACLE_HOME = /Users/oracle/product/10.1.0/db
System name: Darwin
Node name: maczilla.local
Release: 8.3.0
Version: Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT 2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
Machine: Power Macintosh
Instance name: sandbox
Redo thread mounted by this instance: 1
Oracle process number: 10
Unix process pid: 1861, image: [email protected] for the Java version, according to the readme file in the javavm directory, I am running 1.4.1:
1.5 Java Compatibility
This release has been thoroughly tested with Sun's Java Compatibility
Kit for the JDK 1.4.1. Oracle is committed to OracleJVM keeping pace
with Java and other Internet standards. -
Multivalue error when using the previous() function
I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur -
TS1702 unknown error when using the app store
unknown error when using the app store
Im sorry I will try to be more clear.. and I appreciate all of ur input. Wi-fi works fine.. everything opens and functions fine on the I pad. The problem is I will click on app store or the I tunes store...it opens fine and I am able to look at and download apps etc... but after being in the appstore or I tunes store for a couple of minutes I get kicked out to the I pads home screen. Its like pushing the home button but I didn't. It only seems to do this when im in the app store or I tunes store. I have been using the chrome browser and other downloaded apps such as ebay just fine with out this problem occurring. Not sure about safari as I dont use it and use chrome instead. Um I don't think the home button its self is faulty because it works fine and as stated before this only happens when I am in the appstore or I tunes . I've only had this I pad 1 64gb wi-fi for a few days .. I got it off of ebay it was stuck in restore mode getting error code 1611. I was able to successfully Restore it with I tunes and it running ios 5.1. Seams to work great besides the problem being mentioned.
-
Intermittent error when using the Disco Viewer client
Hi, I have a user receiving the following intermittent error when using the Discoverer Viewer client:
“The application encountered an invalid state.
- Discoverer Beans XML Exception. Method: findNode Class: XMLUtils Error: Cannot find parent node. Parent element does not exist in XML document, looking for database_account/eul
OracleBI Discoverer Viewer was unable to find the necessary data for displaying the results of this event. Please correct any errors and try again.”
Any idea what this might be? Any help or direction would be very much appreciated! Thank you!Hello
Is this related to a single machine or common to a single report or is it purely random?
I did a search on your behalf and came up with nothing related to this error. You may therefore need to raise the problem with Oracle Support.
Just out of curiosity which version of Discoverer are you using?
Michael -
Error when compiling the Java file
Hi I have created a jsp program that uses the java files. i have jboss installed. when i compile the java file it gives compilation error saying that javax.servlet.jsp.tagext.TagSupport not found.
Although when i installed the Tomcat seperately i did not get any compilation error. can anyone tell me how to get out of this problem when Tomcat is not installed seperately.
Thanks,
RakeshHi
I think these errors are due to incorrect classpath settings.While compiling HelloHome ..Helloremote must be in classpath.Also if u have packaged them u must be in the package root during compilation ie if uor remote & home interface is in a package called "ejbserver"
then while compiling u must be in the folder above ejbserver & compile command is
javac .\ejbserver\*.java
If uor home & remote interface is in different folder check wheather u have imported the remote interface inside home interface file. -
Error when using the template installer MI post installation process
Hi all,
I am busy to configure the Netweaver Administrator in order to create setup packages for mobile devices. This is a WAS 6.40 ABAP JAVA instance with mobile infrastructure.
I have installed the netweaver SR1 and upgraded abap and java to SPS18 afterwards.
Afterwards I used the template installer, I executed: MI post installation process.
But when I did this an error message occured on the following node:
step ID 8 registering RFC connection.
Error message:
Element
'SAPConfigLib.<SID>.Unclassified.set_Server_Service':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException:
<--Localization failed:
ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle',
ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments:
[]--> : Can't find resource for bundle java.util.PropertyResourceBundle, key
com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!179-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.89
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41 Element 'SAPConfigLib.<SID>.Unclassified.set_Server_Service':Error during executing Java Reflection:JCO.Client not connected in repository call
Here after I followed manual: MI25 SPS18 inst newtech.pdf for configuring the NWA.
I checked the complete manual, but still the error message occurs, when I am using the template installer.
There is one more thing.
When I go to the NWA, to the Mobile Infrastructure node, allmost all subnodes give me the following error:
(For instance on hierarchy grouping:)
Failed to get hierarchy group elements from middleware. Reason: Could not connect to middleware.
Does this error message relate to the other error message?
Please give me advise/hints/directions to solve this problem....
Your help will be appreciated!
Best regards,
Jacco RaymakersI got error during use of template installer in NWA. It is MI post installation in N/w2004s SP09
Error message:
Element
'SAPConfigLib.<SID>.Unclassified.set_Server_Service':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException:
<--Localization failed:
ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle',
ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments:
[]--> : Can't find resource for bundle java.util.PropertyResourceBundle, key
com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!179-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.89
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41 Element 'SAPConfigLib.<SID>.Unclassified.set_Server_Service':Error during executing Java Reflection:JCO.Client not connected in repository call
Please help me the resolve this. -
Error when building the Java pricing userexit manual code
I went throught the manual for the pricing userexit manual... it tells you to ignore the errors when you do an ant build but I want to remove all the errors since they dont let the rest the code compile.... where are the jars for these errors:
[javadoc] C:\DEV\PRC_UE_CUSTOMER\lib_src\src\com\sap\spc\document\DocumentConstants.java:16: package com.sap.vmc.logging does not exist
[javadoc] import com.sap.vmc.logging.Category;
[javadoc] ^
[javadoc] C:\DEV\PRC_UE_CUSTOMER\lib_src\src\com\sap\spc\document\DocumentConstants.java:26: cannot resolve symbol
[javadoc] symbol : class Category
[javadoc] location: class com.sap.spc.document.DocumentConstants
[javadoc] public static final Category CATEGORY = Category.getCategory(Category.APPLICATIONS, "/AP/SPC/Document");
[javadoc] ^See the [SAP note 809820 - Userexit concept for pricing|https://service.sap.com/sap/support/notes/809820]
Use ZIP file the attached to the above note - PRC_UE_CUSTOMER_V105.zip
ZIP file contains an Eclipse .project file that has the required build path. If you read the documents carefully, it does refer this project file.
<?xml version="1.0" encoding="UTF-8"?>
<classpath>
<classpathentry kind="src" path="src"/>
<classpathentry sourcepath="lib_src/src" kind="lib" path="lib_api"/>
<classpathentry kind="lib" path="lib_vmc_api/base_services_stripped_api.jar"/>
<classpathentry kind="output" path="bin"/>
</classpath>
Again read the documents thoroughly. They are neither fictions nor non-fictions, but technical documents written with care. So, we must also read them with care. If we don't follow them, then it is time to engage someone who does. )
BTW, coming back to the Java basics - One must have a class and source files to debug. You won't get a class file unless it is compiled. The Java file won't compile correctly if it has syntax / reference errors. Unfortunately or fortunately, all these apply to the IPC java userexit development as well.
Easwar Ram -
When I use the Glossary Hotspot Wizard to create links within my topics to the terms, I then generate the project using the script (because I want to use popups instead of having the text display in-line). I did not edit this script before running it - do I need to? If so, where does the script reside? Any suggestions would be appreciated so that I can get this working as intended :-).
The error occurs during the WebHelp generation. If I generate the project
without using this script, there is no error.
The error indicates
Line no: 395
Thanks!
Julie
Julie Haddon-Cook
Senior Specialist
Messaging Engineering
Direct: +1 770 303 3507
CVS: 224 3507
Address: SITA | 3100 Cumberland Blvd | Atlanta, GA 30338 | USA
Website: www.sita.aero -
I'm using the Evaluation Version of Vision Builder. I Simulate Acquisition using my own image (jpg), which loads fine. However, when I try to use any of the Inspection Steps features, other than Enhance Images, I get an "Invalid Image Type" error.
Hello,
Vision Builder functions usually work with a certain image type. For example, all the functions listed under Binary (in the menubar) will only work with binary images. Likewise, color functions will work for color images and grayscale will work for grayscale images.
You can convert a color image into a grayscale by extracting a color plane and a grayscale image can be converted to binary using the threshold function.
Hope this helps!
Regards,
Yusuf C.
Applications Engineering
National Instruments -
Exec error when using the messagebox
Hi ,
We used the peoplecode function Exec in the application engine. We also used the function Messagebox to show the error message when the exec is error. But the system prompted us
Think-time PeopleCode event (Exec), but a SQL update has occurred in the commit interval.
Anyone has the same experience on this ? Thanks in advance!
The code for example,
Local number &rc = Exec(&command, %Exec_Synchronous + %FilePath_Absolute);
If &rc = 1 Then
MessageBox(0, "", 0, 0, &command);
End-If;Well if you have any SQL in your Application Engine preceding the Exec function that it will give that error. These are think time function:
Avoid think-time functions in the following PeopleCode events:
SavePreChange.
Workflow.
RowSelect.
SavePostChange.
Any PeopleCode event that executes as a result of a ScrollSelect, ScrollSelectNew, RowScrollSelect, or RowScrollSelectNew function call.
Any PeopleCode event that executes as a result of a Select or SelectNew rowset method.
Violation of this rule can result in application failure.
The following are think-time functions:
Calls to an external DLL.
DoCancel.
DoModal.
DoModalComponent.
Exec (this is think-time only when synchronous).*
File attachment functions.
InsertImage.
Object functions, such as CreateObject, ObjectDoMethod, ObjectSetProperty, and ObjectGetProperty (these are think-time only when the object requires user action).
Prompt.
RemoteCall.
RevalidatePassword.
WinExec (think-time only when synchronous).
WinMessage and MessageBox (depending on the style parameter).
You should process the execute function Asynchronously, because it doesn't require any user intervention (assumption since it's an application engine). %Exec_Synchronous should be set to %Exec_Asynchronous. -
GET_FILTER_VALUES_CHA:3 Error when using the Filters
Hi All,
I get the below error messgage when trying to use the Filters in the web application. I checked the OSS notes (932154, 902393 & 832485) but didn't get a solution. This is a query on a Basic Cube.
SQL 904.
Error in SQL Statement.
SYSTEM ERROR CL_RSR_WWW_RENDERER and form space GET_FILTER_VALUES_CHA:3
Looking forward for some help in this regard.
BW Version: 3.5 SP15
Thanks & regards,
SreeHi,
It worked for me, I dont for your case.
Mine syptom:
When filtering by using the context menu's "keep filter" and then filter by using a "Hierarchy Web Item" (based on Calendar month),
then I was getting the message <i>"System error in program CL_RSR_WWW_RENDERER and form SUBMIT_FILTER"</i>
It is solved by adding a "Filter Web Item" to display the filter values. If you dont want that object in your report, you can hide it.
Vasso -
Error when using the variable System::ErrorDescription
HI All,
When I try to use the variable System::ErrorDescription I get the following error:
The element cannot be found in a collection. This error happens when you try to retrieve an element from a collection on a container during execution of the package and the element is not there.
Do I need to declare it or it's a variable that always is available to get exceptions from the execution states?if this is in a Script Task then:
- add the variable in the Script task property ReadOnlyVariables list
- in the Script Code refer to it as
string ErrorDesc = (string) Dts.Variables["System::ErrorDescription"].Value;
Jan D'Hondt - SQL server BI development -
500 internal server error when using the web interface
I've created several tables in Visual Studio, and I'm using a .NET backend for my mobile services.
The table code looks something like this...
using Microsoft.WindowsAzure.Mobile.Service;
namespace AzureService.DataObjects
public class Country : EntityData
public string Name { get; set; }
I then added a scaffolded item to generate the controller for my table, then published.
I then went to my azure service, flipthechipservice.azure-mobile.net, and tried to run the default POST with default data.
I then get back a popup, which looks like the following...
Now what baffles me is I have already created another table, called 'Call', which has exactly the same 'Name' field as the above Country table, yet the Call POSTs work.
I then tried creating another table, with a Name field, and I get the 500 error again.
How can this be possibly happening? Nothing is different, and now I get 500 errors?
This makes no sense.
ThanksThank you, I looked at the logs, and this is the error...
System.NotSupportedException: Model compatibility cannot be checked because the database does not contain model metadata. Model compatibility can only be checked for databases created using Code First or Code First Migrations.
at System.Data.Entity.Internal.ModelCompatibilityChecker.CompatibleWithMode
I looked this error up, and tried
this proposed solution on StackOverFlow
I changed the line of code in my WebApiConfig Register() method from...
Database.SetInitializer(new MobileServiceInitializer());
to
Database.SetInitializer<MobileServiceContext>(new DropCreateDatabaseIfModelChanges<MobileServiceContext>());
I also have this in my WebApiConfig...
public class MobileServiceInitializer : DropCreateDatabaseIfModelChanges<MobileServiceContext>
protected override void Seed(MobileServiceContext context)
base.Seed(context);
My understanding is that the database should drop and create if the model changes? So why is this not happening?
I then tried another solution, and changed DropCreateDatabaseIfModelChanges to DropCreateDatabaseAlways. I still get an internal error. Then the logs show this problem...
System.Data.SqlClient.SqlException (0x80131904): Cannot open database "master" requested by the login. The login failed.
Login failed for user 'QEOzFqAnDXLogin_flipthechipservice'.
This session has been assigned a tracing ID of 'a3b12e78-90f2-4db0-a5ca-6895eebd246c'. Provide this tracing ID to customer support when you need assistance.
at System.Data.SqlClient.SqlInternalConnection.OnError
As an additional question, how do I re-generate my local SQL database when debugging on my local PC's web browser? I deleted the database, but can't seem to get it back?
Thanks -
Java Errors when using my Java App via Remote Desktop
I have a Java App that runs fine if I invoke it and run it on a windows xp machine "x".
If I remote desktop connect to machine "x" from another windows machine "y"
I get the errors and the Java App is not displayed correctly. It becomes unusable.
While remotely connected if I terminate the Java App and restart it the App
will run just fine and not generate any errors.
Specifically the steps are:
Open a cygwin shell.
invoke the app...java -jar xxx.jar
use the app on the machine, works fine without any exceptions.
Leave the app running and go home...eat dinner...then
VPN into the office
Startup Windows Remote Desktop to the pc running the app.
Start to use the app. Now the exception occur as I click on buttons/enter data into fields.
Then I terminate the App.
Then I restart the app... java -jar xxx.jar
It works fine without exceptions.
This app was developed using NetBeans 6.5
The errors are:
in thread "AWT-EventQueue-0" java.lang.NullPointerException
at com.sun.java.swing.plaf.windows.XPStyle$Skin.getWidth(Unknown Source)
at com.sun.java.swing.plaf.windows.XPStyle$Skin.getWidth(Unknown Source)
at com.sun.java.swing.plaf.windows.WindowsIconFactory$CheckBoxIcon.getIc
onWidth(Unknown Source)
at javax.swing.SwingUtilities.layoutCompoundLabelImpl(Unknown Source)
at javax.swing.SwingUtilities.layoutCompoundLabel(Unknown Source)
at javax.swing.plaf.basic.BasicRadioButtonUI.getPreferredSize(Unknown So
urce)
at com.sun.java.swing.plaf.windows.WindowsRadioButtonUI.getPreferredSize
(Unknown Source)
at javax.swing.plaf.basic.BasicButtonUI.getMinimumSize(Unknown Source)
at javax.swing.JComponent.getMinimumSize(Unknown Source)
at javax.swing.GroupLayout$ComponentSpring.calculateNonlinkedMinimumSize
(Unknown Source)
at javax.swing.GroupLayout$ComponentSpring.calculateMinimumSize(Unknown
Source)
at javax.swing.GroupLayout$Spring.getMinimumSize(Unknown Source)
at javax.swing.GroupLayout$ComponentSpring.calculatePreferredSize(Unknow
n Source)
at javax.swing.GroupLayout$Spring.getPreferredSize(Unknown Source)
at javax.swing.GroupLayout$Group.getSpringSize(Unknown Source)
at javax.swing.GroupLayout$Group.calculateSize(Unknown Source)
at javax.swing.GroupLayout$Group.calculatePreferredSize(Unknown Source)
at javax.swing.GroupLayout$Spring.getPreferredSize(Unknown Source)
at javax.swing.GroupLayout$ParallelGroup.calculateMinimumSize(Unknown So
urce)
at javax.swing.GroupLayout$Spring.getMinimumSize(Unknown Source)
at javax.swing.GroupLayout$Group.getSpringSize(Unknown Source)
at javax.swing.GroupLayout$Group.calculateSize(Unknown Source)
at javax.swing.GroupLayout$Group.calculateMinimumSize(Unknown Source)
at javax.swing.GroupLayout$Spring.getMinimumSize(Unknown Source)
at javax.swing.GroupLayout$Group.getSpringSize(Unknown Source)
at javax.swing.GroupLayout$Group.calculateSize(Unknown Source)
at javax.swing.GroupLayout$Group.calculateMinimumSize(Unknown Source)
at javax.swing.GroupLayout$ParallelGroup.calculateMinimumSize(Unknown So
urce)
at javax.swing.GroupLayout$Spring.getMinimumSize(Unknown Source)
at javax.swing.GroupLayout$Group.getSpringSize(Unknown Source)
at javax.swing.GroupLayout$Group.calculateSize(Unknown Source)
at javax.swing.GroupLayout$Group.calculateMinimumSize(Unknown Source)
at javax.swing.GroupLayout$ParallelGroup.calculateMinimumSize(Unknown So
urce)
at javax.swing.GroupLayout$Spring.getMinimumSize(Unknown Source)
at javax.swing.GroupLayout$Group.getSpringSize(Unknown Source)
at javax.swing.GroupLayout$Group.calculateSize(Unknown Source)
at javax.swing.GroupLayout$Group.calculateMinimumSize(Unknown Source)
at javax.swing.GroupLayout$Spring.getMinimumSize(Unknown Source)
at javax.swing.GroupLayout$Group.getSpringSize(Unknown Source)
at javax.swing.GroupLayout$Group.calculateSize(Unknown Source)
at javax.swing.GroupLayout$Group.calculateMinimumSize(Unknown Source)
at javax.swing.GroupLayout$ParallelGroup.calculateMinimumSize(Unknown So
urce)
at javax.swing.GroupLayout$Spring.getMinimumSize(Unknown Source)
at javax.swing.GroupLayout$Group.getSpringSize(Unknown Source)
at javax.swing.GroupLayout$Group.calculateSize(Unknown Source)
at javax.swing.GroupLayout$Group.calculateMinimumSize(Unknown Source)
at javax.swing.GroupLayout$Spring.getMinimumSize(Unknown Source)
at javax.swing.GroupLayout.calculateAutopadding(Unknown Source)
at javax.swing.GroupLayout.prepare(Unknown Source)
at javax.swing.GroupLayout.minimumLayoutSize(Unknown Source)
at java.awt.Container.minimumSize(Unknown Source)
at java.awt.Container.getMinimumSize(Unknown Source)
at javax.swing.JComponent.getMinimumSize(Unknown Source)
at javax.swing.plaf.basic.BasicTabbedPaneUI$TabbedPaneLayout.calculateSi
ze(Unknown Source)
at javax.swing.plaf.basic.BasicTabbedPaneUI$TabbedPaneLayout.minimumLayo
utSize(Unknown Source)
at java.awt.Container.minimumSize(Unknown Source)
at java.awt.Container.getMinimumSize(Unknown Source)
at javax.swing.JComponent.getMinimumSize(Unknown Source)
at javax.swing.GroupLayout$ComponentSpring.calculateNonlinkedMinimumSize
(Unknown Source)
at javax.swing.GroupLayout$ComponentSpring.calculateMinimumSize(Unknown
Source)
at javax.swing.GroupLayout$Spring.getMinimumSize(Unknown Source)
at javax.swing.GroupLayout$ComponentSpring.calculatePreferredSize(Unknow
n Source)
at javax.swing.GroupLayout$Spring.getPreferredSize(Unknown Source)
at javax.swing.GroupLayout$Group.getSpringSize(Unknown Source)
at javax.swing.GroupLayout$Group.calculateSize(Unknown Source)
at javax.swing.GroupLayout$Group.calculatePreferredSize(Unknown Source)
at javax.swing.GroupLayout$Spring.getPreferredSize(Unknown Source)
at javax.swing.GroupLayout$Group.getSpringSize(Unknown Source)
at javax.swing.GroupLayout$Group.calculateSize(Unknown Source)
at javax.swing.GroupLayout$Group.calculatePreferredSize(Unknown Source)
at javax.swing.GroupLayout$Spring.getPreferredSize(Unknown Source)
at javax.swing.GroupLayout$Group.getSpringSize(Unknown Source)
at javax.swing.GroupLayout$Group.calculateSize(Unknown Source)
at javax.swing.GroupLayout$Group.calculatePreferredSize(Unknown Source)
at javax.swing.GroupLayout$Spring.getPreferredSize(Unknown Source)
at javax.swing.GroupLayout$SequentialGroup.setValidSize(Unknown Source)
at javax.swing.GroupLayout$Group.setSize(Unknown Source)
at javax.swing.GroupLayout.calculateAutopadding(Unknown Source)
at javax.swing.GroupLayout.layoutContainer(Unknown Source)
at java.awt.Container.layout(Unknown Source)
at java.awt.Container.doLayout(Unknown Source)
at java.awt.Container.validateTree(Unknown Source)
at java.awt.Container.validateTree(Unknown Source)
at java.awt.Container.validate(Unknown Source)Crossposted
[http://forums.sun.com/thread.jspa?threadID=5421349&messageID=10892967#10892967]
Maybe you are looking for
-
Imovie video at 7 frames per second?
I'm working on a stop motion piece that's meant to run at 7 fps, but the slowest I can seem to make it run in imovie is 10 fps. Is it possible to get this video to work at my desired frame rate, or is 10 fps the slowest the program will allow?
-
Maximum RAM for HP Pavilion All-in-One MS228sc
Since my HP Pavilion All-in-One MS228sc is getting increasingly slow - even after releasing space on the hard-drive I am researching on the possibility for a RAM upgrade. The Pavillion ins "born" with 2 GB RAM in the slots and 2 GB virtual RAM. My qu
-
The need for the option to purchase perpetual license of Production Bundle
My business has used Adobe products for 15 years. I am a big fan. But I wish to continue purchasing the Production Bundle line of products with perpetual licenses. I have no need for the Cloud. I also want to upgrade from my current version of CS6 as
-
my adobe pdf files are not working on the safari, they don't open and something pops up that says i need to accept the user agreement but i've done it so many times. how do i fix this? please help!
-
The tweet "..." cannot be sent because the connection to Twitter failed
I've been attempting to use the built in twitter functionality to post photos, however the title error message keeps popping up! I have deleted the account setings from the phone and reinstalled Twitter as suggested on the Twitter support blog for so