UK Payroll Increase in Pension age for women 2010

We have a lady who is born in Sept 1948. When we try to change the NI Category to 'C' (Employer Only) on info type 0069 (National Ins. GB) we get error message 'Employee is under state retirement age, NI category C not valid'. Begin date on info type 0069 is 06.07.2010 and her calculated age is 61.
We currently have two entries in table T511K for State pension age female (SPENF)
Ctry grouping Constant     End Date         Valid From        Value        Text
08                  SPENF         05.04.2010      01.01.1900       60.00       State pension age female (yrs)
08                  SPENF         31.12.9999      06.04.2010       65.00       State pension age female (yrs)
We have implemented note 1388001. In the note it states women born on or before 5 April 1950 will NOT have any changes to their pension age.
I found, via debugging, it is picking the current state pension age i.e. 65 which is why we are getting the message but don't understand why because it should be using state pension age of 60 as she is born before 1950.
Any help would be greatly appreciated
Shamshudin

Hi Sham,
From my ECC 6 EHP 4 system patched at level 21 for SAP-HR
Ctry Grouping Constant End Date   Start Date Value        Text
08            SPENF    05.04.2010 01.01.1900       60.00 State pension age female (yrs)
08            SPENF    31.12.9999 06.04.2010       65.00 State pension age female (yrs)
In my System, when I attempted to create Ni cat C for a women born before 1950, it popped up an additional field called Age Proof, and gave error message, cat C can be assigned only if age proof is provided.
When I selected Birth Cert, it allowed to save. I did use a birthdate in September 48 and used the start date of 01.07.2010.
Do you think Note 1412207 - Incorrect age validation in IT69 Decoupled infotype is relevant for you?
I still think it might be as well to raise an OSS Message

Similar Messages

In R12, can payroll user enter expense report for employees via web-based?

Hi,
In R12, can payroll user enter expense report for employees via web-based screen? Previously in 11i, it can be done via the Expense Report forms.
Appreciate advise on this.
Thanks in advance.
Regards,
Shiau Chin

Hi Anne,
Please see page 42 of the [url http://download.oracle.com/docs/cd/B34956_01/current/acrobat/120oieig.pdf]iExpenses Implementation and Admin Guide for R12 . If you are unable to enter the ID as per the guide, I would suggest raising an Service Request with Oracle Support.
Cheers, Pete

How to do aging for AR by 0DOC_DATE

Hi to all,
Please can any one tell me, how to aging for Receivables (datasource 0FI_AR_4), by use of BLDAT and SY-SYSTEM date difference.
I knew 0NETDUEDATE is used to find the aging for (datasource 0FI_AR_4).
But I need to use BLDAT (0DOC_DATE) u2013 SYSTEM DATE difference to get bucket.
I shall be thankful to you for this.
Regards
Pavneet Rana

Hi rana,
inorder to pic the sys date you can use the sap standard variable 0DATE or you can create a variable of type replacement path with customer exit and write the below logic for the variable in CMOD to pic the sys date.
IF i_step = 2.
CASE i_vnam.
WHEN 'ZCURDATE'.
CLEAR: l_s_range.
l_s_range-low = sy-datum.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDCASE.
ENDIF.
Now create one more formula varaible for the 0DOC_DATE with replacement path.
for ex: zdocdate
next create a Kf to cal the difference of days
Diff of days = zCURDATE -zdocdate
now create a Kf where use the logic
KF1 = (diff of days<=10)*0DEBIT_CREDIT_LC
you can rename this Kf as 1-10 days...
create KF2,KF3 ... based on your need.
Hope this helps you
regards
KP

How to do aging for Net Debit for 0DEB_CRE_LC

Hi to all,
i am doing aging for receivables(0FI_AR_4) for Net debit > 0.
I have created CKF excaption aggregation at query level to get Net debit greater than zero, via ( 0DEB_CRE_LC > 0 ) * 0DEB_CRE_LC for every customer.
it gives correct result .
but when i used aging via used of 0NETDUEDATE, for 1-10 and 11-30 bucket and i have restricted bucket with this CKF.
for some customer i get correct result if both debit and credit come is 1-10 bucket and net debit of this > 0.
But if customer debit come in 1-10 bucket and credit in 11-30 bucket it gives incorrect result.
how to do aging for such conditions.
Please can any one provide me solutions.
I shall be thankfull to you for this.
Regards
Pavneet Rana

Thanks for reply ,
my query format is like that
query rows = region and restricted with region value
query column = aging bucket 1-10 , 11-20, and every bucket is restricted with CKF 0DEB_CRE_LC > 0 and 0NETDUEDATE and division value
and drill down by customer and region
format looks like that
division1 division1 division1 division2 division2 division 2
1 - 10 11 - 20 21-30 1 - 10 11 - 20 21 - 30
Region1
Region2
so report purpose is to calculate aging for NET DEBIT VALUE .
so if i drill down by customer for net debit value, net debit value according to bucket is correct if debit and credit of customer lies in same bucket
and if customer credit and debit comes under different bucket net debit value is incorrect for bucket wise.
and if dont use aging bucket net debit value according to customer and region wise is getting correct , but i need aging also for net debit value.
please can you provide me solutions to get netdebit according to bucket wise for every customer , when drill down.
I shall be thankfull to you for this.
Regards
Pavneet Rana
Edited by: pavneet rana on Feb 7, 2011 3:02 PM

My iphone 3g is getting really slow. I done full restore ,deleted most apps . Not many photos in my album. i have no videos on my iphone. When taking photo with my iphone it takes ages for camera to open up. Very slow to take photo. Any suggestions? Help!

My iphone 3g is getting really slow. I done full restore ,deleted most apps . Not many photos in my album. i have no videos on my iphone. When taking photo with my iphone it takes ages for camera to open up. Very slow to take photo. Any suggestions? Please help !!!!

Thank you very much for your reply gdgmacguy :) I did all you suggested apart from restore as new device . Didn't know I could do that . After restore I did restore from back up only, as I didn't want to end up without contacts details on my phone. If I restore as new device how do I get my all contacts? Still will have to use back up? Sorry if it sounds like I don't know what i am doing, i just have no one to ask who would know. Thank you

My key to increase backlighting of keys for my MacBook Pro isn't functioning

My Key to increase backlighting of Keys for my MacBook Pro isn't functioning.

Check your settings in System Preferences>Keyboard.
Try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao.

Aging for Downpayment paid to vendor -reg

Dear All,
I want to do ageing analysis for Downpayment/Advance paymet, Vendor balance made to the vendors. How can i Do this.
Whether this will tally with the balances of the vendor.
Thanks and Regards,
C.M.SATISH KUMAR.

I want whether we can do ageing for the Special GL Down payment account straightaway,rather than doing the ageing via vendor account.
Thanks and Regards,
c.m.sathish kumar
[email protected]

How to increase the waiting time for response in Adapter Engine not in IE

Hi Experts,
It is a SOAP to Proxy Synchronous interface. SOAP system is sending the request to PI, PI sending the same request to ECC system, After execution of some logic response back to PI in 7 minutes. In ABAP Stack(sxmb_moni) processing the response message also successfully with success flag after completion of these 7 minutes. But exactly 5 minutes later getting the error at Java Stack RWB- in communication channel monitoring i.e
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message bd2bf8d0-b2c2-11e0-c383-001cc4fb5cb7(OUTBOUND) expired. We have set the "runtime-HTTP_TIMEOUT" parameter as 3600. thats why in Integration engine it is processing successfully.
kindly suggest me how to increase the waiting time for response in Adapter Engine. Exactly after 5 mins getting the above error in rwb, but in Integration Engine getting successful flag after 7 mins until then it is waiting for response with status flag Log version.
Thanks & Regards,
Srihari.

Hi,
Please see
How To... Investigate Timeouts In Synchronous XI/PI Scenarios
It will answer all your queries
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?QuickLink=index&overridelayout=true

Increasing Email Size Limits for some users

Hi All,
For some users (management) i needed to arrange that they are able to send bigger files then the default 10MB limit to each other.
I used this procedure to do so,
https://www.simple-talk.com/sysadmin/exchange/increasing-email-size-limits-for-your-high-profile-users-in-exchange-2010/
In a nutshell:
Set Global Transport Org. Config to 200MB
Set Transport Send and Receive connector to 200MB
Created a Distribution group adding the MT members and me (for testing)
Created a transport Rule for the 10MB limit for all users and exception for the distribution group
(Believe me, i am not happy with the 200MB size limit)
All seems to work but i have one issue that i cannot tackel or maybe it is by design.
-Managemant can also send big files to all
users who do not have this privelige, this is not someting i want, sending 100MB+ attachments to over 150 users.
Is this by design or do i mis something?
Thanks,
Ron

Hi RonGielgens,
Attachment size in exchange has to be set on
Global settings
Connectors (send and receive connectors)
Mailbox
The global settings will affect all the others. of course connectors will affect specific servers and mailbox one user. You have to set the global to the absolute max size you want to allow in your organization.
after you do this you will need either to set the 10MB on each mailbox
Get-Mailbox | Set-Mailbox -MaxSendSize 10MB -MaxReceiveSize 10MB
Then change the limit on specific mailbox
or another way is to create a transport rule that will reject the email if the attachment size it > 10MB unless the sender/recipient is the required user or group.
so basically create 2 transport rules
1. reject messages sent to anyone with attachment > 10mb unless the recipient is userX
2. reject messages sent from anyone with attachment > 10mb unless the sender is userX
Normal case it should not allow.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Tax config steps for women in ecc 5.0 version

Hi to all Guru's,
I want to configure tax for women in ECC5.0 VERSION.
The tax tables are V_T7INT1 AND V_T7INT3.
in V_T7INT1 i have maintained tax code for men and in V_T7INT3
I have maintained tax slabs for the men for corresponding the tax code.
But i am not gettng how i have to configure tax slabs for women in ecc5.0 version.
in ecc5.0 version we dont have drop down slab type for men and women like in ECC6.0 VERSION
Please let me know the config steps needed for tax calculation for women.
Thanks
Priya

Hi sameer,
I searched all the notes but i am not gettng that note for ECC5.0.
Please suggest me some note numbers so that i can go through it?
Thanks
Priya

Is there a way to increase the font size for the "songs" and "artists" lists in the new music app for iPad 2 (iOS 5)? It is too small for me.

Is there a way to increase the font size for the "songs" and "artists" lists in the "music" app for iPad 2 (iOS 5)? It is smaller than the previous version.

falkner09 wrote:
is there really no fix for this?
It would depend on your definition of "Fix"
Your iPod touch running OS 4.2 has a ZOOM feature which will enable you to see the screen more clearly.
To turn Zoom on or off got to:
Settings > General > Accessibility > Zoom and tap the Zoom On/Off switch.
_To Zoom in or out_:
Double-tap the screen with three fingers. By default, the screen is magnified 200 percent. If you manually change the magnification (by using the tap-and-drag gesture, described below), iPod touch automatically returns to that magnification when you zoom in by double-tapping with three fingers.
Increase magnification: With three fingers, tap and drag toward the top of the screen (to increase magnification) or toward the bottom of the screen (to decrease magnification). The tap-and-drag gesture is similar to a double-tap, except you don’t lift your fingers on the second tap—instead, drag your fingers on the screen. Once you start dragging, you can drag with a single finger.
_Move around the screen_:
When zoomed in, drag or flick the screen with three fingers. Once you start dragging, you can drag with a single finger so that you can see more of the screen. Hold a single finger near the edge of the display to pan to that side of the screen image. Move your finger closer to the edge to pan more quickly. When you open a new screen, Zoom always goes to the top-middle of the screen.
_Large Text_:
Large Text lets you make the text larger in alerts, and in Calendar, Contacts, Mail, Messages, and Notes. You can choose 20-point, 24-point, 32-point, 40-point, 48-point, or 56-point text.
Set the text size: In Settings, choose General > Accessibility, tap Large Text, then tap the text size you want.
I hope this has helped a little - other than this option I think it pretty much is what it is.
BTW - This information can be found on page 208 of the iPod Touch iOS 4.2 Users Guide.
Best wishes..
Ricky

Why does it take ages for my video files to be listed in the menu?

I have my apple tv 2nd generation connected to my airport extreme first generation via ethernet. I have my mac mini connected to the same network (though not connected to the airport extreme) with video files and tv shows in itunes. My itunes media is stored on a hard drive connected to my mac mini and home sharing is on.
It takes ages for my apple tv 2 to list the videos/tv shows in its menu. For example I have my films listed by genre. If I select a genre, it takes sometimes as long as 5+ minutes to list the videos within that genre.
Can anybody help with this frustration?

Welcome to the Apple Community.
You probably have a problem with your LAN. If you are using wifi:
You can download and install iStumbler to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel.

Division wise Aging for Customers

Hi,
Can we take division wise ageing for customers and add the division field at the time of payment entry(F-28)?
Thanks in advance

Hi
Use T code S_ALR_87012167. It depends on your organizational structure also
Regards
Sanil

Aging for Receivables

Hi Every body,
I am logging for first time in SAP FAN CLUB.I hope my beginning will be successful with your help.
Our company has configured SAP for new business line. Our requirement is that we want Customer Receivable(Outstanding) ageing for Billing amount and also at Retention amt, Liquidated damage, Excise amt .
With our current SAP practice, we can able to get aging with Billing amount. As we are not capturing Invoice with above break up at SD as well as payment entry it is not possible.
Can you suggest is there solution with SAP so that we can capture above break up either at
1. Time of Sales billing
2. Payment Entry.
Regards,
Sanjay Chavan

Hi,
There are some standard reports related to Account receivables...
SAP Menu>Accouting>Financial Accouting>Information System>Reports for Account Receivable Accouting
e.g. S_ALR_87012168 Due Date Analysis for Open Items
Please reward pints if it is helpful.
Regards,
Sameer

Where can I Increase the size limit for attachments

Good Morning:
I am working in OCS R2 (9.0.4). Where can I Increase the size limit for attachments in the messages sent. Also can I set this parameters to user level or the change affect every user in the system?
Thanks a lot.

babowa wrote:
The only way to increase the fonts on your desktop would be system wide by going down a notch on the resolution. Some people won't do it because it increases the pixel size so the fonts won't be quite as sharp; I decided I'd rather have that than having to squint continuously. Go to System Preferences > Displays > Scaled > this will give you all resolution options available. No harm in trying - just check the default (top) choice again if you don't like any of the others.
It's a b*&^ch getting old . I still use the screen zoom instead of decreasing resolution, but maybe soon ...

UK Payroll Increase in Pension age for women 2010

Similar Messages

Maybe you are looking for