Ultra 10 showing Date ERROR

Ultra 10 frequently showing Date Error, date changed year --:--:1967, sometimes it automatically changed correct time. I need solution for this issue.

Hello John,
The U10 has 4 sticks; 3 x 64Mb and 1 x 128Mb DIMMs... I tried every combination of 2 I could think of with the same results (RED STATE)
you have to use pairs (same capacity) of DIMMs. Use a pair of the 64MB DIMMs to test.
Get another 128MB DIMM or better 2 or 4 128MB DIMMs (one as as spare) -- if the system is working otherwise get another U10 with (333 or 440MHz /2MB Cache) CPU and memory (128MB or 256MB modules).
The error might be caused by a bad CPU module, bad system board (error appears later due to a termic problem), bad memory module or bad power supply.
I tried booting with no sticks of RAM, and with the exception of a error message telling me I had no ram, the POST/RED STATE happened the same way...
I guess the CPU module is bad. Have you checked that none of the pins of the CPU module are bent or missing ?
These systems are very cheap today, except for the higher shipping charges, a complete system costs less than the individual components in sum.
Michael

Similar Messages

I am using Windows 8.1 i have an External Hard Disk and one drive is now inaccessible due to sudden power failure few days ago. Now it shows "Data error (Cyclic redundancy check)". I want all my important files and Pics. How ?

Hi,
I am using Windows 8.1
I have an External Hard Disk i have partitioned it to 4 parts.
One drive is now inaccessible due to sudden power failure while listening Music from that drive few days ago.
Now it shows "Data error (Cyclic redundancy check)".
I tried all the procedures provided here like
chkdsk /f, diskpart, rescan etc
but no result :( (i mean all processes failed. They could not detect the drive).
Please help me to get those data, pictures and project files.
thank you

Then why aren't you posting this in the Windows 8 forums found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
This is a Windows 7 forum for discussion about Windows 7.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Getting Stale Data error in show/hide of Advance table

Hi,
Am using hide/show in advance table.If open the hide/show in 1st row then it shows correct data ,if i click the next row's show hide then its shows the same result as ist row, and i try to use show/hide link more thann three times then it throws stale data error given below.
The requested page contains stale data. This error could have been caused through the use of the browser's navigation buttons (the browser Back button, for example).
Cause:
The record with primary key values {1400} could not be found in view object MisForecastHeadOfiiceAM.InnerTableVO_OuterInnerVL_InnerTableVO.
To proceed, please select the Home link at the top of the application page to return to the main menu. Then, access this page again using the application's navigation controls (menu, links, and so on) instead of using the browser's navigation controls like Back and Forward.
This problem doen't exsist when i deplo it to the server.
But recently i marked if open a show/hide link of a row and add then add another row to the table and save.Then the same problem reflects in the instance also.
What may be the possible cause.
Thanks

if i click the next row's show hide then its shows the same result as ist row, and i try to use show/hide link more thann three times then it throws stale data error given below.
>>> Seems like your VO linking is not proper. Does your VO have primary keys defined? Do you have any custom code on these VO?
--Shiv

HT1918 i don't understand why i cannot purchase anything using my Mastercard. Each time i enter the card expiry date, it will show an error.

Last time i usually pay the purchasing item using my debit visa card.
after that i no more use the debit visa card.
i'm using mastercard.
now each time i want to purchase anything, i cannot pay using the mastercard.
when i insert all the details including the expiry date, apple will show an error. only the expiry date.
i don't understand why.

Does it have to be an applet?
If you want the same behaviour as in the code with traffic lights, change
class MortgageApplet extends JApplet implements ActionListener {
to
class MortgageApplet extends JFrame implements ActionListener {
and change
public void init() {
to
public MortgageApplet() {

My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no error

My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no errors.
I tried to reinstall driver.
I downloaded new codec
I tried Microsoft FIX IT
Nothing worked.
Need some help.
Thank you!!
Paul

Hi Albos, This is a known problem. These superdrives die after a while. See the various threads on this site and the internet. I have the same problem with my Imac 20" 2.16 ghz. Just wants to burn and read cd's. Its has to do with the laser. For DVD an CD are two different laser and the one for DVD's has probably died in yours (as it did in mine). I bought an external LG burner and problem solved. (And a lot cheaper than replacing the superdrive)
Hope this helps you.
Robert

Stale data error while deleting a record

Hi
My design of this development is as follow...
1. Search Page in which users give some search criteria and results will be displayed in the results region on the same page. For each results record I have two buttons like 'Update' and 'Delete' so that users can delete the record or can update the record. For update i created a one more page where users can able to edit and save the data. I have two AM one for Search Page and one for Update Page.
Please find more details below.
intfEO based on PO_REQUISITIONS_INTERFACE_ALL
errorEO based on PO_INTERFACE_ERRORS
updateEO based on PO_REQUISITIONS_INTERFACE_ALL
VOs
intfVO based on intfEO and errorEO
updateVO based on updateEO
AM
intfAM based on intfVO
updateAM based on updateVO
Pages
searchPG based on intfAM
updatePG based on updateAM
Suppose I have one record in interface table with corresponding error record in error table.When users given the search criteria and hit enter they found a record. It means i have one record in the interface having one error record in the error table and both tables have same transaction id (primary key). So here user first try to update the record and it is working. After update he try to delete a record then I am getting below error. Please note that I am not getting this error when if i directly delete the record with out doing any update before delete. When ever users click on update icon then update PG will open and when users click on Apply button then data is getting updated in the database and page will forward to the search page.
Unable to perform transaction on the record.
Cause: The record contains stale data. The record has been modified by another user.
Action: Cancel the transaction and re-query the record to get the new data.
My UpdatePage Controller
/*===========================================================================+
|   Copyright (c) 2001, 2005 Oracle Corporation, Redwood Shores, CA, USA    |
|                         All rights reserved.                              |
+===========================================================================+
| HISTORY                                                                  |
+===========================================================================*/
package powl.oracle.apps.xxpowl.po.requisition.webui;
import com.sun.java.util.collections.HashMap;
import com.sun.rowset.internal.Row;
import java.io.Serializable;
import oracle.apps.fnd.common.MessageToken;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OADialogPage;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.OAWebBeanConstants;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.beans.form.OASubmitButtonBean;
import oracle.apps.fnd.framework.webui.beans.message.OAMessageDateFieldBean;
import oracle.apps.fnd.framework.webui.beans.message.OAMessageTextInputBean;
//import oracle.apps.fnd.oam.diagnostics.report.Row;
import oracle.apps.icx.por.common.webui.ClientUtil;
import powl.oracle.apps.xxpowl.po.requisition.server.xxpowlPOReqIntfUpdateAMImpl;
import powl.oracle.apps.xxpowl.po.requisition.server.xxpowlPOReqIntfUpdateEOVOImpl;
* Controller for ...
public class xxpowlPOReqIntfAllUpdatePageCO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
        VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
   * Layout and page setup logic for a region.
   * @param pageContext the current OA page context
   * @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processRequest(pageContext, webBean);
     xxpowlPOReqIntfUpdateAMImpl am = (xxpowlPOReqIntfUpdateAMImpl)pageContext.getApplicationModule(webBean);
      xxpowlPOReqIntfUpdateEOVOImpl UpdateVO =(xxpowlPOReqIntfUpdateEOVOImpl)am.findViewObject("xxpowlPOReqIntfUpdateEOVOImpl");
      String newvalue = (String)pageContext.getSessionValue("testValue");
      System.out.println("Transaction ID from processRequest UpdateCO from testValue field:"+newvalue);
      String transactionid = pageContext.getParameter("HashmapTransacitonid");
      System.out.println("Transaction ID from processRequest Hash Map in UpdateCO :"+transactionid);
      String errorcolumn = pageContext.getParameter("HashmapErrorcolumn");
      System.out.println("Error Column Name from processRequest Hash Map in UpdateCO :"+errorcolumn);
      String errormsg = pageContext.getParameter("HashmapErrormessage");
      System.out.println("Error Message from processRequest Hash Map in UpdateCO :"+errormsg);
      String readyonly = pageContext.getParameter("HashmapReadonly");
      System.out.println("Read Only value from processRequest Hash Map in UpdateCO :"+readyonly);
      if (transactionid !=null & !"".equals(transactionid)) {
     /* Passing below four parameters to the Update Page */
      Serializable amParams[] = new Serializable[]{transactionid,readyonly,errorcolumn,errormsg} ;
      pageContext.getRootApplicationModule().invokeMethod("executexxpowlPOReqIntfUpdateEOVO", amParams);
   * Procedure to handle form submissions for form elements in
   * a region.
   * @param pageContext the current OA page context
   * @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processFormRequest(pageContext, webBean);
     OAApplicationModule am = pageContext.getApplicationModule(webBean);
      if (pageContext.getParameter("ApplyButton") != null)
        System.out.println("Inside ApplyButton method in UpdatePageCO");
        OAViewObject vo = (OAViewObject)am.findViewObject("xxpowlPOReqIntfUpdateEOVO");
        String transactionid = pageContext.getParameter("HashmapTransacitonid");
        System.out.println("Transaction ID from processFormRequest Hash Map in UpdateCO-ApplyButton method :"+transactionid);
        am.invokeMethod("apply");
          pageContext.forwardImmediately("OA.jsp?page=/powl/oracle/apps/xxpowl/po/requisition/webui/xxpowlPOReqIntfAllPG",
                                                 null,
                                                 OAWebBeanConstants.KEEP_MENU_CONTEXT,
                                                 null,
                                                 null,
                                                 true,
                                                 OAWebBeanConstants.ADD_BREAD_CRUMB_NO);
       else if (pageContext.getParameter("CancelButton") != null)
        am.invokeMethod("rollback");
        pageContext.forwardImmediately("OA.jsp?page=/powl/oracle/apps/xxpowl/po/requisition/webui/xxpowlPOReqIntfAllPG",
                                               null,
                                               OAWebBeanConstants.KEEP_MENU_CONTEXT,
                                               null,
                                               null,
                                               true,
                                               OAWebBeanConstants.ADD_BREAD_CRUMB_NO);
UpdatePageAMImpl.java
package powl.oracle.apps.xxpowl.po.requisition.server;
import oracle.apps.fnd.common.MessageToken;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.OARow;
import oracle.apps.fnd.framework.server.OAApplicationModuleImpl;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.inv.appsphor.order.server.XxapOrderHeaderVOImpl;
import oracle.jbo.Transaction;
// ---    File generated by Oracle ADF Business Components Design Time.
// ---    Custom code may be added to this class.
// ---    Warning: Do not modify method signatures of generated methods.
public class xxpowlPOReqIntfUpdateAMImpl extends OAApplicationModuleImpl {
    /**This is the default constructor (do not remove)
    public xxpowlPOReqIntfUpdateAMImpl() {
    /**Container's getter for xxpowlPOReqIntfUpdateEOVO
    public xxpowlPOReqIntfUpdateEOVOImpl getxxpowlPOReqIntfUpdateEOVO() {
        return (xxpowlPOReqIntfUpdateEOVOImpl)findViewObject("xxpowlPOReqIntfUpdateEOVO");
    /**Sample main for debugging Business Components code using the tester.
    public static void main(String[] args) {
        launchTester("powl.oracle.apps.xxpowl.po.requisition.server", /* package name */
      "xxpowlPOReqIntfUpdateAMLocal" /* Configuration Name */);
/* // Added by
    public void execute_update_query(String TransactionID) {
    xxpowlPOReqIntfUpdateEOVOImpl vo = getxxpowlPOReqIntfUpdateEOVO();
    vo.initQuery(TransactionID);
// Added by , this will not call bec changed the logic and so now the update button enabled on search results page
// and this method will not called
public void pageInEditMode (String transactionID, String readOnlyFlag, String ErrorColumn,
                                                                       String ErrorMessage)
    System.out.println("Transaction Id from pageInEditMode in UpdatePGAMImpl.java: "+transactionID);
    System.out.println("xxReadOnly from pageInEditMode in UpdatePGAMImpl.java: "+readOnlyFlag);
    // Get the VO
    xxpowlPOReqIntfUpdateEOVOImpl updateVO = getxxpowlPOReqIntfUpdateEOVO();
    //Remove the where clause that was added in the previous run
    updateVO.setWhereClause(null);
    //Remove the bind parameters that were added in the previous run.
    updateVO.setWhereClauseParams(null);
    //Add where clause
    // updateVO.addWhereClause(" TRANSACTION_ID = :1 ");
    //Bind transactionid to the where clause.
     // updateVO.setWhereClauseParam(1, transactionID); // this will not work bec it will start with zero from from 1
      updateVO.setWhereClauseParam(0, transactionID);
    //Execute the query.
    updateVO.executeQuery();
    xxpowlPOReqIntfUpdateEOVORowImpl currentRow = (xxpowlPOReqIntfUpdateEOVORowImpl)updateVO.next();
    // Assiging the transient varaibles
    currentRow.setxxErrorMessage(ErrorMessage);
    currentRow.setxxErrorColumn(ErrorColumn);
    if ("N".equals(readOnlyFlag))
          /* Make the attribute to 'False so that all fields will be displayed in Edit Mode because we used this
           xxReadOnly as SPEL */
           currentRow.setxxReadOnly(Boolean.FALSE);
   public void executexxpowlPOReqIntfUpdateEOVO(String transactionID, String xxReadyOnly, String ErrorColumn,
                                                                                          String ErrorMessage)
       System.out.println("Transaction Id from executexxpowlPOReqIntfUpdateEOVO in UpdatePGAMImpl.java: "+transactionID);
       System.out.println("xxReadOnly from executexxpowlPOReqIntfUpdateEOVO in UpdatePGAMImpl.java: "+xxReadyOnly);
       System.out.println("Error Message from executexxpowlPOReqIntfUpdateEOVO in UpdatePGAMImpl.java: "+ErrorColumn);
       System.out.println("Error Column from executexxpowlPOReqIntfUpdateEOVO in UpdatePGAMImpl.java: "+ErrorMessage);
     // Get the VO
     xxpowlPOReqIntfUpdateEOVOImpl updateVO = getxxpowlPOReqIntfUpdateEOVO();
     //xxpowlPOReqIntfUpdateEOVORowImpl updaterowVO = xxpowlPOReqIntfUpdateEOVO();
   //not working
   //    OARow row = (OARow)updateVO.getCurrentRow();
   //    row.setAttribute("xxReadOnly", Boolean.TRUE);
// updateVO.putTransientValue('XXXXX',x);
     //Remove the where clause that was added in the previous run
     updateVO.setWhereClause(null);
     //Remove the bind parameters that were added in the previous run.
     updateVO.setWhereClauseParams(null);
     //Add where clause
     // updateVO.addWhereClause(" TRANSACTION_ID = :1 ");
     //Bind transactionid to the where clause.
      // updateVO.setWhereClauseParam(1, transactionID); // this will not work bec it will start with zero from from 1
       updateVO.setWhereClauseParam(0, transactionID);
    // updateVO.setWhereClauseParam(1, ErorrColumn);
     //Execute the query.
     updateVO.executeQuery();
     /* We want the page should be read only initially so after executing the VO with above command
        and if you use next() it will go to the first record among the
        fetched records. If you want to iterate for all the records then use iterator */
        /* Using Iterator
         while(updateVO.hasNext()) { // this will check after execute Query above command if it has any rows
          xxpowlPOReqIntfUpdateEOVORowImpl currentRow = (xxpowlPOReqIntfUpdateEOVORowImpl)updateVO.next();
          /* above line next() will take the control of the first record */
      /*     currentRow.setxxErrorMessage(ErrorMessage);
             currentRow.setxxErrorColumn(ErrorColumn);
           if ("Y".equals(xxReadyOnly))
                  currentRow.setxxReadOnly(Boolean.TRUE);
         } // this while loop will loop till end of all the fetched records
     xxpowlPOReqIntfUpdateEOVORowImpl currentRow = (xxpowlPOReqIntfUpdateEOVORowImpl)updateVO.next();
// Assiging the transient varaibles
currentRow.setxxErrorMessage(ErrorMessage);
currentRow.setxxErrorColumn(ErrorColumn);
    /* Make the attribute to 'TRUE' so that all fields will be displayed as READ ONLY because we used this
       xxReadOnly as SPEL
       if ("Y".equals(xxReadyOnly))
              currentRow.setxxReadOnly(Boolean.TRUE);
//Added by and this methiod will get called from UpdatePG Process Form Request controller
     public void rollback()
       Transaction txn = getTransaction();
       if (txn.isDirty())
         txn.rollback();
    public void apply()
        //OAViewObject vo1 = (OAViewObject)getxxpowlPOReqIntfUpdateEOVO();
        //Number chargeAccountID = vo1.get
      getTransaction().commit();
      OAViewObject vo = (OAViewObject)getxxpowlPOReqIntfUpdateEOVO();
      if (!vo.isPreparedForExecution())
       vo.executeQuery();
SearchPG AM
package powl.oracle.apps.xxpowl.po.requisition.server;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.server.OAApplicationModuleImpl;
import oracle.jbo.RowSetIterator;
import oracle.jbo.Transaction;
import oracle.jbo.domain.Number;
import powl.oracle.apps.xxpowl.po.requisition.lov.server.xxpowlErrosLovVOImpl;
import powl.oracle.apps.xxpowl.po.requisition.lov.server.xxpowlInterfaceSouceCodeLovVOImpl;
import powl.oracle.apps.xxpowl.po.requisition.lov.server.xxpowlItemSegment1LovVOImpl;
import powl.oracle.apps.xxpowl.po.requisition.lov.server.xxpowlOrgLovVOImpl;
import powl.oracle.apps.xxpowl.po.requisition.lov.server.xxpowlReferenceNumberLovVOImpl;
import powl.oracle.apps.xxpowl.po.requisition.lov.server.xxpowlRequestIdLovVOImpl;
import powl.oracle.apps.xxpowl.po.requisition.lov.server.xxpowlRequisitionTypeLovVOImpl;
// ---    File generated by Oracle ADF Business Components Design Time.
// ---    Custom code may be added to this class.
// ---    Warning: Do not modify method signatures of generated methods.
public class xxpowlPOReqIntfAllAMImpl extends OAApplicationModuleImpl {
    /**This is the default constructor (do not remove)
    public xxpowlPOReqIntfAllAMImpl() {
    /**Container's getter for xxpowlPOReqIntfAllVO
    public xxpowlPOReqIntfAllVOImpl getxxpowlPOReqIntfAllVO() {
        return (xxpowlPOReqIntfAllVOImpl)findViewObject("xxpowlPOReqIntfAllVO");
    /**Sample main for debugging Business Components code using the tester.
    public static void main(String[] args) {
        launchTester("powl.oracle.apps.xxpowl.po.requisition.server", /* package name */
      "xxpowlPOReqIntfAllAMLocal" /* Configuration Name */);
    /**Container's getter for xxpowlRequestIdLovVO
    public xxpowlRequestIdLovVOImpl getxxpowlRequestIdLovVO() {
        return (xxpowlRequestIdLovVOImpl)findViewObject("xxpowlRequestIdLovVO");
    /**Container's getter for xxpowlErrosLovVO
    public xxpowlErrosLovVOImpl getxxpowlErrosLovVO() {
        return (xxpowlErrosLovVOImpl)findViewObject("xxpowlErrosLovVO");
    /**Container's getter for xxpowlOrgLovVO
    public xxpowlOrgLovVOImpl getxxpowlOrgLovVO() {
        return (xxpowlOrgLovVOImpl)findViewObject("xxpowlOrgLovVO");
//Start Adding by Lokesh
//This method wil get invoked from the search results page Process Request
   public void rollbackItem()
     Transaction txn = getTransaction();
     if (txn.isDirty())
       txn.rollback();
//This method will invoked from Controller page when user click Yes on delete confirmtion page from Search Results Page
   public void deleteItem(String trasnsactionID)
     Number rowToDelete = new Number(Integer.parseInt(trasnsactionID));
     OAViewObject vo = (OAViewObject)getxxpowlPOReqIntfAllVO();
     xxpowlPOReqIntfAllVORowImpl row = null;
     int fetchedRowCount = vo.getFetchedRowCount();
   // System.out.print(fetchedRowCount);
     System.out.println("No of row fetched on delete method :"+fetchedRowCount);
     RowSetIterator deleteIter = vo.createRowSetIterator("deleteIter");
       System.out.println("1 :");
     if (fetchedRowCount > 0)
         System.out.println("2 :");
       deleteIter.setRangeStart(0);
         System.out.println("3 :");
       deleteIter.setRangeSize(fetchedRowCount);
         System.out.println("4 :");
       for (int i = 0; i < fetchedRowCount; i++)
           System.out.println("5 :");
         row = (xxpowlPOReqIntfAllVORowImpl)deleteIter.getRowAtRangeIndex(i);
           System.out.println("6 :");
         Number PK = row.getTransactionId();
           System.out.println("7 :");
         if (PK.compareTo(rowToDelete) == 0)
             System.out.println("8 :");
           row.remove();
             System.out.println("9 :");
           getTransaction().commit();
             System.out.println("10 :");
           break;
             //System.out.println("11 :");
       System.out.println("11 :");
     deleteIter.closeRowSetIterator();
       System.out.println("12 :");
    /**Container's getter for xxpowlInterfaceSouceCodeLovVO
    public xxpowlInterfaceSouceCodeLovVOImpl getxxpowlInterfaceSouceCodeLovVO() {
        return (xxpowlInterfaceSouceCodeLovVOImpl)findViewObject("xxpowlInterfaceSouceCodeLovVO");
    /**Container's getter for xxpowlRequisitionTypeLovVO
    public xxpowlRequisitionTypeLovVOImpl getxxpowlRequisitionTypeLovVO() {
        return (xxpowlRequisitionTypeLovVOImpl)findViewObject("xxpowlRequisitionTypeLovVO");
    /**Container's getter for xxpowlReferenceNumberLovVO
    public xxpowlReferenceNumberLovVOImpl getxxpowlReferenceNumberLovVO() {
        return (xxpowlReferenceNumberLovVOImpl)findViewObject("xxpowlReferenceNumberLovVO");
    /**Container's getter for xxpowlItemSegment1LovVO
    public xxpowlItemSegment1LovVOImpl getxxpowlItemSegment1LovVO() {
        return (xxpowlItemSegment1LovVOImpl)findViewObject("xxpowlItemSegment1LovVO");
Search Page Controller
/*===========================================================================+
|   Copyright (c) 2001, 2005 Oracle Corporation, Redwood Shores, CA, USA    |
|                         All rights reserved.                              |
+===========================================================================+
| HISTORY                                                                  |
+===========================================================================*/
package powl.oracle.apps.xxpowl.po.requisition.webui;
import com.sun.java.util.collections.HashMap;
//import com.sun.java.util.collections.Hashtable;
import java.util.Hashtable;
//import java.util.HashMap;
import java.io.Serializable;
import javax.servlet.jsp.PageContext;
import oracle.apps.fnd.common.MessageToken;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OADialogPage;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.OAWebBeanConstants;
import oracle.apps.fnd.framework.webui.TransactionUnitHelper;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
* Controller for ...
public class xxpowlPOReqIntfAllSearchPageCO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
        VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
   * Layout and page setup logic for a region.
   * @param pageContext the current OA page context
   * @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processRequest(pageContext, webBean);
    //Added by Lokesh
      OAApplicationModule am = pageContext.getApplicationModule(webBean);
     if (TransactionUnitHelper.isTransactionUnitInProgress(pageContext, "updateRecord", false)) {
           am.invokeMethod("rollbackItem");
           TransactionUnitHelper.endTransactionUnit(pageContext, "updateRecord");
   * Procedure to handle form submissions for form elements in
   * a region.
   * @param pageContext the current OA page context
   * @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processFormRequest(pageContext, webBean);
         String userClicked = pageContext.getParameter("event");
         System.out.println("Event from processFormRequest in SearchPageCO :"+userClicked);
       System.out.println("Parametere Names are :- \t" + pageContext.getParameter("UpdateImage"));
       System.out.println("Parametere Names are :- \t" + pageContext.getParameter("event"));
     if (pageContext.getParameter("event") != null &&
         pageContext.getParameter("event").equalsIgnoreCase("Update")) {
         String ReqTransactionId=(String)pageContext.getParameter("transacitonidParam");
         String errorcolumn=(String)pageContext.getParameter("errorcolumnParam");
         String errormsg=(String)pageContext.getParameter("errormessageParam");
         String readyonly="Y"; //(String)pageContext.getParameter("readonlyParam");
         System.out.println("Requisition Transaction Id : "+ReqTransactionId);
         System.out.println("Error Column : "+errorcolumn);
         System.out.println("Error Message : "+errormsg);
         System.out.println("Read Only : "+readyonly);
         HashMap params = new HashMap(4);
         params.put("HashmapTransacitonid",ReqTransactionId);
         params.put("HashmapErrorcolumn",errorcolumn);
         params.put("HashmapErrormessage",errormsg);
         params.put("HashmapReadonly",readyonly);
         pageContext.putSessionValue("testValue",ReqTransactionId);
         //System.out.println("Transaction Id passing through HashMap :- \t" + ReqTransactionId);
         pageContext.setForwardURL("OA.jsp?page=/powl/oracle/apps/xxpowl/po/requisition/webui/xxpowlPOReqIntfAllUpdatePG",
                                    null,
                                    OAWebBeanConstants.KEEP_MENU_CONTEXT,
                                    null,
                                    params,
                                    true,
                                    OAWebBeanConstants.ADD_BREAD_CRUMB_YES,
                                    OAWebBeanConstants.IGNORE_MESSAGES) ;
else if (pageContext.getParameter("event") != null &&
         pageContext.getParameter("event").equalsIgnoreCase("Delete")) {
    System.out.println("Inside Delete method in SearchCO");
    String deleteTransactionID=(String)pageContext.getParameter("deleteTransactionIDParam");
    System.out.println("Transaction Id in Delete Method :- \t" + deleteTransactionID);
// deleteTransactionID =""; //Makeing Null because dont want to show the transaction id bec users dont know about it
    //MessageToken[] tokens = { new MessageToken("MESSAGE_NAME", deleteTransactionID) };
    MessageToken[] tokens = { new MessageToken("MESSAGE_NAME", "") };
    OAException mainMessage = new OAException("FND", "FND_MESSAGE_DELETE_WARNING", tokens);
    OADialogPage dialogPage = new OADialogPage(OAException.WARNING,mainMessage, null, "", "");
    String yes = pageContext.getMessage("AK", "FWK_TBX_T_YES", null);
    String no = pageContext.getMessage("AK", "FWK_TBX_T_NO", null);
    dialogPage.setOkButtonItemName("DeleteYesButton");
    dialogPage.setOkButtonToPost(true);
    dialogPage.setNoButtonToPost(true);
    dialogPage.setPostToCallingPage(true);
    dialogPage.setOkButtonLabel(yes);
    dialogPage.setNoButtonLabel(no);
    Hashtable formParams = new Hashtable(1);
    formParams.put("transactionIdDeleted", deleteTransactionID);
    dialogPage.setFormP

Hi friend ,
In Search page i didn't do any update. and also search page is not a problem it's working fine. create page only the problem. In this page only throwing Stale data error exception.
Please give me more suggestion.
Thanks in advance,

How to show custom error message in WebADI Excel template?

Hi,
I've created a custom Web ADI integrator and associated it with a 'Procedure' based custom interface.
WebADI Interface API Returns is set to "Error Message".
I'm using raise_application_error(-20001, "Actual Error Message") for invalid rows,but custom error message from PL/SQL is not populated on the excel template.
Instead it is showing "SQL exception occurred during PL/SQL upload".
Am I missing anything? How to show custom error message from Pl/SQL procedure to WebADI Excel template?
TIA
Narasimha

The custom API errors are visible in the BNE log but not on the Excel.
BNE Log=>
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR          BnePLSQLUpload.doUpload: Exception while uploading to PL/SQL API. Error Code: 20001, Message: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR          BnePLSQLUpload.doUpload: Stack trace: java.sql.SQLException: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:202)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1005)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1307)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3449)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3550)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4710)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at oracle.apps.bne.integrator.upload.BnePLSQLUpload.doUpload(BnePLSQLUpload.java:284)
at oracle.apps.bne.integrator.upload.BneSAXUploader.processDeepestLevel(BneSAXUploader.java:2346)
at oracle.apps.bne.integrator.upload.BneSAXUploader.startElement(BneSAXUploader.java:1182)
at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:181)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1288)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:234)
at oracle.apps.bne.integrator.upload.BneUploader.processUpload(BneUploader.java:301)
at oracle.apps.bne.integrator.upload.BneAbstractUploader.processUpload(BneAbstractUploader.java:114)
at oracle.apps.bne.integrator.upload.async.BneAsyncUploadThread.run(BneAsyncUploadThread.java:140)
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 WARNING        BneOracleWebAppsContext.getTimeZone CLIENT_TIMEZONE_ID has not been set
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 ERROR          BneOracleWebAppsContext.getExtraJDBCConnection recieved the same connection as the base connection. There may be transaction problems.
How to show the same error in the excel template?
Here is the package:
CREATE OR REPLACE PACKAGE BODY APPS.XXPO_COSTFACTS_WEBADI_PKG
AS
   PROCEDURE upload_data (
                          P_CONTAINER_ID IN VARCHAR2
                        , P_SAIL_DATE IN DATE
                        , P_PO_NO IN VARCHAR2
                         ) IS
    --declare
    lv_err_msg      VARCHAR2(240);
    lf_err_flag     NUMBER := 0;
    ln_temp         NUMBER;
    BEGIN
    --------------------- checking for mandatory parameters---------------------------
      IF (P_CONTAINER_ID IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg||'-'||'Please enter CONTAINER_ID - ';
      END IF;
      -------------Validation for Sail Date Format----------------------
      IF (P_SAIL_DATE IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg || ' ' || 'Enter Sail Date - ';
      ELSE
         BEGIN
            SELECT 1
              INTO ln_temp
              FROM DUAL
             WHERE P_SAIL_DATE = TO_DATE (TO_CHAR (P_SAIL_DATE, 'DD-MON-YYYY'), 'DD-MM-YYYY');
         EXCEPTION
            WHEN NO_DATA_FOUND THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format';
            WHEN OTHERS THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format'|| SQLERRM;
         END;
      END IF;
      -------------Validation for PO_Number----------------------
      IF (P_PO_NO IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg || ' ' || 'Enter PO_NO - ';
      ELSE
         BEGIN
            SELECT count(1)
              INTO ln_temp
              FROM PO_HEADERS
             WHERE Attribute4 = P_PO_NO;
         EXCEPTION
            WHEN NO_DATA_FOUND THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' No Oracle PO for Biceps PO#'||P_PO_NO;
            WHEN OTHERS THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Error getting the Oracle PO for Bicpes PO#'||P_PO_NO||' Error-' || SQLERRM;
         END;
      END IF;
     -----------------------Insert Record----------------------------
     IF lv_err_msg is NULL THEN
     BEGIN
         INSERT
          INTO XXP2P_HW_COST_FACTORS_STG
                 CONTAINER_ID
                ,SAIL_DATE
                ,PO_NO
                , ERROR_FLAG
                , ERROR_MSG
               ,CREATED_BY
                ,CREATION_DATE
                ,LAST_UPDATED_BY
                ,LAST_UPDATE_DATE
                ,LAST_UPDATE_LOGIN
            VALUES
                 P_CONTAINER_ID
                ,P_SAIL_DATE
                ,P_PO_NO
                ,lf_err_flag
                ,lv_err_msg
              ,FND_GLOBAL.USER_ID
                , trunc (sysdate)
                ,FND_GLOBAL.USER_ID
                , trunc (sysdate)
                ,FND_GLOBAL.LOGIN_ID
              -- commit;
              DBMS_OUTPUT.put_line
                '-' || 'After ap_invoices_interface'
        EXCEPTION
        WHEN OTHERS THEN
          ROLLBACK;
          lf_err_flag := 1;
          lv_err_msg := lv_err_msg || ' ' || 'error loading CONTAINER_ID-' || P_CONTAINER_ID || SQLERRM;
          raise_application_error(-20001, lv_err_msg);
        END;
    ELSE
          raise_application_error(-20001, lv_err_msg);
    END IF;
END upload_data;
END XXPO_COSTFACTS_WEBADI_PKG;

I have created a projet on imovie and when I try to share it. it automaticall closes and shows an error.. what should I do.. I dont want to loose all my documents at all...?? its very urgent plss tell a solution to it as soon as ppossiblc

I was working on my project on imovie and when I was trying to share it.. it automatically closes and shows an error... I have tried to do it so many times and it shows the same error again and again.. I dont want to loose the document at all.... I facing too much problem plss help me plss its very urgrnt for me... plss help me :-(

well no reply from the community. sniff- do i stink!? - probably a little bit. If i have lost all that data then I'm gonna really really pong.
Any ways i have purchased a 1tb usb HDD and have managed to duplicate the dmg file onto it. however still unable to mount the **** thing. so now i have ordered disk warrior which will be in my possession tomorrow.
fingers toes eyes crossed.

CFGRID does not show data (CF9.0)

Under development server, CFGRID show data , all is fine , correct. (CF9.0 version dev)
Under production server , CFGRID does not show data, only a grey line (like a HR).
How to debug this ?
Thanks,

Kindly check below to troubleshoot this issue:-
Is there any difference between your CF production & developement server setting summary?
Is there any browser script level difference between your both CF server?
Are you getting any relevant logging error in your CF server application.log & exception.log?
Run a very simple cfgrid running app to check, either getting issue with that too or not.

Date error when scheduling webi reports

Hi,
When i click the prompt option in re schedule the scheduled webi report, i got the error "while trying to invoke the method java.util.date.gettime() of a null object loaded from a local variable 'date' "
The BI version is 4.1 SP03
The scheduled webi reports failing and got the error as "Unparseable date: "01/01/1900" "
How to solve this issues?
Regards,
Kathir

This might fix it from the note http://service.sap.com/sap/support/notes/1981477
Create a WebI report that uses a date object in the Query Filters
Schedule the report
Reschedule by manually entering date value which shows only date and no timestampExample: 12/31/2007
Reschedule by selecting date value from the calendar which shows date timestampExample: 12/31/2007 12:00:00 AM
Create a biar file using the Import Wizard and migrate to BI 4.1 SP2
BI 4.1 SP2 BILaunchPad, navigate to and Right click the report and go to “History”
Right click the instance without a timestamp for the date parameter and select “Reschedule”
Click on “Prompts” on the left menu and note an error is produced:This error occurred: while trying to invoke the method java.util.Date.getTime() of an object loaded from local variable ‘date’
Attempting to schedule this instance (as Run Now or Reschedule) without selecting a Prompt value fails with the error: Unparseable date: “12/31/2007”
Using the instance with a timestamp works as expected

Stale Data Error - iProcurement Receiving Page

Hi,
I created a button on the Standard iProc Receving Page result table region. When user hit on button it popup window using javascript:window.open(<Page info & Properties>). I am using popwindow to capture some details, and saving into database. But when i am closing and coming back to my main page(Recieiving Page) and navigating to next page it is giving me the Stale Data Error.
Interstingly this error does not come when the search is done using reqeustor or if i dont click on button for popup window. All other cases gives me this error. One info about this page is the VO which is showing in error should not execute all the time. There are lot of VO's which execute based on search fields entered. The VO belowi s one of them when reqeustor info is given in search fields.
Error: Stale Data
The requested page contains stale data. This error could have been caused through the use of the browser's navigation buttons (the browser Back button, for example).
Cause:
The number of displayed records, 25, exceeds the actual number of records, 0, in view object ReceiveItemsAM.ReceiveMyItemsVO. Some of the displayed records may have been deleted.
Any pointers will be appreciated.
Thanks & Regards,
Venkata.

Hi
Generally Oracle provide a global variable hr_general.g_data_migrator_mode and passing this as 'Y' should update who columns and object version number. But I am not sure it is available for vacancy APIs or not. I remember a similar kind of bug logged long time back.
Regards
Gaurav

The operating system returned error 23(Data error (cyclic redundancy check).)

My Stored Procedures and Jobs Showing this Error. Even though i can able to access the data throgh SSMS in Database Engine.Please help on this.
Executed as user: RMS\Administrator. The operating system returned error 23(Data error (cyclic redundancy check).) to SQL Server during a read at offset 0x000006684a2000 in file 'F:\RMSLiveData\RMS.mdf'. Additional messages in the SQL Server error log and
system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors;
for more information, see SQL Server Books Online. [SQLSTATE HY000] (Error 823). The step failed.
Thanks
RehaanKhan. M

DBCCCHECKDB('DBNAME',REPAIR_ALLOW_DATA_LOSS)
For crying out loud! Don't you have any shame!
There are situations where you may have to run DBCC CHECKDB with the option REPAIR_ALLOW_DATA_LOSS, but it is not the first thing you shold try if the database seems to be corrupt. Particularly, you should first make sure that you work on a copy of the database
files. REPAIR_ALLOW_DATA_LOSS means that DBCC CHECKDB has carte blanche to throw all pages it can piece together - which could be about all data pages if it is that bad.
Corruption siuations are very difficult to assist with in forums, because there can be a lot of stake. The only advice I can give is to restore the database from a clean backup. If you don't have a clean backup, you have a problem. The database may still
be saved, but you need an expert on site to help you, if you have never worked with this before. Advice given in this forum applied haphazardly can result in more damage that you already have.
But, oh, one thing: this type of corruption are always due to hardware errors like bad disks or bad memory sticks. So just restoring the database is not enough. Finding new hardware is important too.
Erland Sommarskog, SQL Server MVP, [email protected]
Actually on the same disk there are other Databases Stored and they work Properly and Backup also can be taken for that Databases. But, for this particular database only this error is happening when iam trying to take backup. But data retrieval and access to
front end application happening as usual. Please help on this.
RehaanKhan. M

Help - "Cannot copy file: Data error (Cyclic Redundancy Check)"

Hey there,
I'm having problems with my Zen Mosaic EZ00. Up until a few weeks ago it has been working fine however, since then, has begun to show the error message? "Cannot copy file: Data error (Cyclic Redundancy Check)" whenever I try to copy files on to it. I have tried the recovery software available and it only updated the firmware. Some files do occasionally (and very occasionally) copy but usually it shows the error message and cancels the copy.
I would really appreciate if anyone could help me with this?
Many thanks :smileytongue:

sorry for the double post!
ive just realised that my ipod isnt actually charging, its just got the orange light blinking!
not too sure what is going on now!
lol

N78 showing system error when trying to delete pho...

I took photos in my N78 (with the record location option turned ON). Later I moved all the photos to another location(phone memory to memory card) through a file manager software(Xplore).
Later I moved them to my computer using the USB cable.
Now, in the phone, in the "images menu ", the phone still shows the icons(a broken blue icon) for the already deleted photos. Moreover, when I try to delete the photos, it asks for the delete confirmation and when I press Ok, it shows "Generalystem Error".
So, is there any way I can delete all the icons for the already deleted photos ?

Syncronise your phone data with Outlook
Copy (dont use select all) only files you know ar need from mem card to PC
1. format memory card using phones file manager
2. pres " * " , " 3" , "mutimedia key" and "power" Hold all 4 kyes down untill Nokia saund played
syncronise with PC to bring your datas back, install aplications you need , paste saved files from memory card in propper folder
If you need my help or I late with an answer you need, send me a private message
P.S.
Please before doing that, be sure you have already searched the topict on this site about the issue you have. Read Help sections before asking. Describe yor issue step by step with complete details.

Sales customer report shows this error

Hi ,
please how to resolve this error recently it showed this error ..i have send my log file error ..i am not figured out where the problem lies...its urgent ...greateful to all..please help me....this problem taken after creation of new legal entity.
Projects: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXTGSCPR005 module: Consolidated Sales by Customer Client wise
Current system time is 19-OCT-2012 12:09:23
**Starts**19-OCT-2012 12:09:23
ORACLE error 1427 in FDPSTP
Cause: FDPSTP failed due to ORA-01427: single-row subquery returns more than one row
ORA-06512: at "APPS.XX_XML_SALES_CUSTOMER3", line 127
ORA-06512: at "APPS.XX_XML_SALES_CUSTOMER3", line 318
ORA-06512: at line 1
The SQL s
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 1306154 on node ORAPSPR01 at 19-OCT-2012 12:09:23.
Post-processing of request 1306154 failed at 19-OCT-2012 12:09:23 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Exceptions posted by this request:
Concurrent Request for "Consolidated Sales by Customer Client wise" has completed with error.
Concurrent request completed
Current system time is 19-OCT-2012 12:09:23
thanks,
User13100220.

I read many like this, start_date or end_date. Are you sure that this query return only 1 row? Because period_name may not uniquely indentify the records.
SELECT start_date FROM gl_periods WHERE period_name = p_gl_period_from
it shows error i didnot find any data ... error taken after creation of new legal entity.....
thanks,

Ultra 10 showing Date ERROR

Similar Messages

Maybe you are looking for