UltraNav and TrackPoint not working for my user account - but ok for others...

Got a strange one on my X201T.  For some reason I can't fathom, my laptop's Trackpoint, Touchpad and all their associated buttons do not work when I log into my laptop - they did before but in the last few days, they've stopped.  My external USB still works fine when connected.
However, if, for example, I do 'ctrl-alt-del' and lock the laptop, they start working again until the moment I'm logged back in.  Also, If I log in on a Guest account, they all work fine!  This suggests it's not the hardware, I think.
I've looked at the Control Panel / Mouse dialogue and the options under the UltraNav tab are all greyed out - but they are not on the Guest account.  Somehow, my user account on the laptop is not allowing me to use the Trackpoint, etc.
My external USB mouse works fine in all accounts, btw.
I'm running Windows 7 64-bit.  I've updated drivers through Lenovo update (though none seemed related to this problem).
Any thoughts how I can fix this?

kokoko, I had this problem last week. I solved it by removing "thinkpad ultranav driver" and "thinkpad ultranav utility," rebooting and reinstalling them. It hasn't happened again.

Similar Messages

  • Safari (7.0.1) is non-responsive (spinning pinwheel) upon start up.  It will work in temp user account but not in my main user acct.  I tried reinstall via comman-r prompt on start up but the problem persists.  Any suggestion for reinstall or repair?

    Safari is non-responsive after intitial start up.  Before it can load the homepage (google), it will hang and give a perpetual pinwheel until I force quit the program.  Safari works in temporary user account but not in my primary user account.  I have reinstalled osx via the command-r upon start up and the problem still persists.  Any suggestions on how to reinstall or repair safari?

    Thanks for thinking about my problem. I've already experimented with creating a new user, a co-administrator. The programs don't crash when that account is running, just as they don't crash when the guest-user's account runs. So it seems that the problem is limited to the default user's account, which is the one that was running when I installed the updates to the OS and the firmware. Another clue is that the programs that crash as soon as they are launched are *probably* the ones that were open at that time in that account. Yet deleting Saved Application States does not keep the programs from crashing when next launched.
    So the mystery continues, but these additional facts will help with the diagnosis, I hope.
    Thanks again for your suggestion.
    Gordon

  • Flash player does not work under one user account.

    Flash player does not work under one of my user accounts.
    My system: I work with a mac mini with Mac OS X 10.6.8.
    What I have done:
    I installed the flash player maybe one year ago under my "first" user account. At that time this user account had had administrator authorization. In the meantime I had to change this "first" user account in an account without administrator authorization and created an administrator user with which I installed different programms. Lately, the message came up that it would be necessary to update the flash player. I did it; under the "first" user account, but of course with the administrator's password for installing. The installation had been "successful" - so I was told. But it did not run. I tried it again and again. Each time with "deinstallation" first. No way; it did not work.
    After asking Adobe for the reason of the problem, they suggested to install the programm directly under the administrator user. I did that (of course after deinstalling under the "first" user account) with the result, that flash player runs under my administrator and my "second" user account, but not under the first user account. There I am always told to update my flash player.
    With this result, I talked to Adobe. So they told me to contact the producer of the operating software, since this would be a mistake of the operating software.
    And here I am - full of hope to get help from you.
    Thanks for reading. And thanks in advance for helping me.
    Nanny FS

    Any update to provide at all here guys?  Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs).  I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing.  If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
    Thoughts???

  • IChat works in one user account but not in another

    my computer phobic parents just bought a new 27" iMac and I've been using iChat's screen sharing with him to help my dad with the computer, we've already set up a separate user account on the machine for my mom we can't get iChat to work under her user account.
    The apple rep had trouble using her Gmail account so he set up an AIM account but still no luck
    I have her in iChat under my dad's user account and can do video chats and screen sharing with her, no problem.
    But regardless of whether or not we leave her jabber account logged in under my dad's user account, we can't get iChat to accept her account info when she is loged into her own user account.
    (P.S. parental controls for her account aren't activated neither is admin privileges)

    Hi,
    Make her account an Admin Account.
    A Managed Account and Parental Controls tend to be somewhat linked and a sliding scale of things.
    If there is no reason to Manage her account there is no reason why she cannot also be an Admin account.
    She should also Check iChat > Preferences > Accounts > Security and see who is in the Blocked or Allowed Lists and see if you are in the wrong one.
    8:00 PM Monday; April 5, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Itunes not working in one user account

    I'm running OSX 10.6.8 and the latest iTunes software. My iTunes has stopped working on one user account only, the menu is completely greyed out and will not function when launched. To quit iTunes I have to use force quit. I've tried deleting the plist preferences, re-installing iTunes from a back up and also re-installing from new, but the same fault persists. Any suggestions or help would be greatly appreciated.

    Delete all gnome config files before (the .gnome* directories) and also caches and session config (somewhere in .config directory). You will lost all application config, but I do it from time to time and it solves even some application bugs.

  • IPhoto '11 works on one user account but not the other

    I upgraded to iPhoto '11 from iPhoto '08 a couple of weeks ago using the MacApp store. After doing so, I opened the application on my main user account, received a message that the library had to be updated, the application did so, and it has been working wonderfully since. The problem I'm having is with my wife's user account. I did not open the application and upgrade the library immediately on this account. Before I could do so, my wife hooked up her iPhone to sync, which automatically opened iPhoto. I get the gray screen with the large spinning wheel in the center, and her library never appears. I have tried two strategies to fix this, and so far, have had no luck. The first was to hold option while launching the application, and selecting her library. I get the exact same result doing this. My next strategy was to completely delete iPhoto from my system, then re-download and reinstall it, and try to open the library once again. Unfortunately, this did not work. I thought the next step should be to delete iPhoto '11, reinstall iPhoto '08, open my wife's library using iPhoto '08, then reinstall '11 and upgrade her library. Since iLife came preinstalled on my mac when I purchased it years ago, I'm not certain how to reinstall iPhoto '08. Does anyone know how to do this, or have another suggestion for solving this problem? Thank you in advance for your help!

    In your wife's account:
    Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    *What's the plist file?*
    For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
    Regards
    TD

  • Why does Flash not work with multiple user-accounts on a single PC?

    Running XP-Professional (MediaCenter), SP3 and using IE 8, NIS 2010 (disabled during the installation of FP), 3 different user accounts on a single PC
    As user A (admin) installed FP ver.  10.0.45.2, and it works fine under the admin account, however, when logging-on as user B.  FP is not recognized (?) and user B is asked to intall FP agian, however, the installation fails.
    After removing the FP installation (as being user A) and then install FP as user B (who has also admin rights) , FP works fine for user B, however for user A, FP is not installed/recoginzed (?), and user A is being asked to install FP, however that installation the fails, and so on and so on , . . . . .
    Any suggestion to resolve this irritating behaviour?

    Hi busy, there is a thread that discusses this very issue with links, that includes screenshots which  you may find helpful.
    http://forums.adobe.com/thread/584941?tstart=0
    Regards,
    eidnolb

  • ISight not working from one user account on MacBook

    Hi everyone,
    It'd be great to get some help with fixing an iSight camera. I've followed the instructions here:
    http://support.apple.com/kb/HT2090
    and have narrowed it down to a particular user account (it has admin permissions). Other user accounts can access the iSight fine. However, every application I try under that one user account can't access the iSight.
    Unfortunatly it's my wife's account. She quite likes to skype her family in the earthquake prone area of New Zealand called Christchurch.
    Any ideas of things I could try, permissions I could reset, etc would be great.
    I've tried:
    * resetting the PRAM
    * resetting the SMC
    * rebooting
    * fixing disk permissions (from multiple accounts)
    I've got a reasonably techy background, so even telling me the device node that the iSight is accessable on would be useful - that way I can manually check the permissions on that.
    Thanks!
    Tim

    Hi Tim,
    That was partly my fault  (well actually it was entirely my fault)
    I missed this bit:-
    However, every application I try under that one user account can't access the iSight.
    Now it is really Odd that this one user cannot access the camera at all in any App where as other users on the Mac can.
    I would start with the FONT BOOK.
    Check that all Fonts are active, particularly the System Fonts.
    Certain Apple Apps will not work properly if Helvetica or Lucida Grande are turned Off or Missing.
    Basically we are looking for something that she has changed (or has become corrupt) that is not directly linked to the camera but is needed (there is no direct way to turn On or Off the camera access).  (Fonts are first choice)
    Next check the Address Book.
    Is the My Card (Head and Shoulders icon) actually listing her details.
    Have a look at this
    This Apple Article refers to a .plist that is a System wide one.
    However as a .plist it may be the thing that is blocking access to one user.
    I don't have it on my G4/1GHz Dual processor running 10.5.8 but neither do I have iMovie 7 (from iLife '08)
    Some people have reported that removing this gets the camera back for iChat.
    Make the Address Book Export of copy of itself  (File Menu > Export > Archive)
    After that I would try moving (NOT Deleting) the whole contents of her Home Folder/Library/Preferences.
    Then Restart the computer then try specific apps.
    If Skype then works you will know it is one of the .plists that you moved.
    Then comes the monotonous bit of moving back some .plists at a time until you can narrow down the one that is at fault.
    Have you tried a Safe Boot ?  (it will need another restart after it has done that)
    9:00 PM      Wednesday; July 20, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Caps Key not working in main user account

    Caps key does work in a guest account. Just bought this 13" Macbook Pro and transferred my user account from my old Powerbook. Over the air since I didn't have a firewire 800 to 400 cable. Everything seems to work fine but that.
    Should I do a backup and then full restore? I can use SuperDuper or Time Machine.
    Any ideas?
    Message was edited by: darrenv

    What OS do you have on the Power Book? If you have an older OS on the PowerBook, you won't be able to restore that clone to your new computer, as you can't have an OS older than the hardware.
    Here is what I would do. Clone the drive to an external. Then run migration assistant and transfer your files. Then see if the problems persist. If everything is good, then no worries. If problems persist, I would bite the bullet, do a clean install, and unfortunately, drag and drop. You really only need to drag the main folders of your Home folder (Documents, Movies, Pictures, Music). That's where usually all the user-created content is. If you have it saved in other locations, you'll have to move that. I save all my stuff in these folders, so a drag+drop is pretty simple when I need to do it.
    As for your app settings and app support in your Library folder, on a computer that old, I'd reinstall all those apps, and go through my app preferences from scratch. Depending on how many apps you have, it's not a daunting task.
    I actually enjoy clean installs, as they give me an opportunity to get rid of junk I don't need, and apps I don't use. Plus they make your computer run faster.
    Bryan

  • Keyboard is not working on one user account

    Only one user account on my iMac cannot use the keyboard. All other accounts including the admin works fine. But after my daughter signs in to her account (using the keyboard to type her password) the keyboard is no longer detected by bluetooth. The mouse works fine and it seems as though the keyboard actually loses power too because the caps lock button does not even light up anymore. Please help!

    Hello ChristinaM004,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning bluetooth issues:
    Troubleshooting wireless mouse and keyboard issues
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • SFTP works on one user account, but not another

    I am using a Mac Mini running Mavericks.  I am trying to upload via sftp my homework.  I have been able to do so on a test user account.  But not my primary account.  I double checked my settings on both.  Both look identical.  I am using Fugu as my client for sftp.  I previous have been able to upload with Dreamweaver.  But now nothing.

    In your wife's account:
    Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    *What's the plist file?*
    For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
    Regards
    TD

  • CIFS shares not working, created new user accounts

    I have a solaris 11.1 x86 system running, where after recreating user accounts, so that they have a home dir, they lost smb/cifs access.
    I ran the following cmds:
    userdel <username>
    useradd -m <username>
    passwd <username>
    CIFS access was setup and worked before this change, using the solaris cifs server.
    The setup was done following the guide geving on paulies world blog.
    The error seen on the windows 7 client is: "The network path cannot be found"
    I have added the line "*.debug /var/adm/messages" to the '/etc/syslog.conf' file.
    This gives serveral errors of the format "date&time hostname smbsrv: [id xxxxxx kern.notice] NOTICE: [hostname\guest]: <sharename> bad path: /<zpool name>/<zfs name>
    Any advice on how to restore smb access:)

    sorry, but i followed these instructions and the icon has reappeared, but now i get a message that says preferences error, could not load accounts after having run the combo updater
    NB. my iBook originally came with panther, not tiger, does this make a difference?

  • My usb port does not work on all user accounts

    My usb port does not power my iPhone or Apple keyboard on my main account, but if I switch users it begins to work
    Spring 2011 macbook air with the latest OSX as of Jan 2012.
    Thoughts
    THANKS
    Stan

    Try Resetting the System Management Controller (SMC)

  • Keyboard n mouse not working on setting user account of win7

    hi
    i have problem
    when i wnat install win7 on my macbook air 13"2014" after working with bootcamp and boot windows when installation finished my mouse , keyboard not working to setup an account

    You do not have the correct BC drivers installed. You need a USB2 flash disk. Download drivers appropriate to your Mac from System requirements to install Windows on your Mac via Boot Camp - Apple Support and Boot Camp: Install or repair Boot Camp drivers.
    If your hardware says BCA in the table, use BC Assistant, check Download Software option only, and build the drivers USB.

  • [SOLVED]Sound not working in simple user account KDE

    Yesterday i did fresh install of Arch with the new snapshot 2010.05 , after installation I did pacman -Syu and then installed xorg and finally KDE . I did the minimal installation of KDE i.e is kdebase-workspace and kdebase-konsole and kdebase-dolphin . As it was suggested in Wiki I installed gstreamer10.0-plugins and phonon-xine and in the multimedia setup i have already preffered default option above all as it was also suggested in wiki but I still cant hear any sound in the normal user account of kde . My sound card is VIA VT1708B 8-CH .
    Sound is working perfectly in gnome and xfce . It is also working fine in Kubuntu , Opensuse(KDE) . Its just dont work in Arch linux if I install KDE .
    If somebody have solution of this problem please help , i really want to use KDE in arch linux . If you guys need any additional information then please tell me.
    Thanks .
    Last edited by harbhag (2010-05-23 09:14:49)

    Also you mentioned it worked in Gnome and XFCE but you didn't say which distro; if you meant Gnome and XFCE in Arch then disregard my next sentence. Did you configure ALSA during the Arch install? http://wiki.archlinux.org/index.php/Beginners'_Guide#Part_III:_Install_X_and_configure_ALSA

Maybe you are looking for