UM Service Does Not Initially Start

Hi, everyone!
Whenever our Exchange 2010 server is restarted, the UM service will not initially start. However, it will start when I then go to manually start it.
Based on the error logs, it seems like it may have something to do with DNS. The error mentions how 10.4.50.1 resolves to an invalid FQDN. 10.4.50.1 is the IP address to the PBX Gateway, which is the address entered into Exchange's UM Settings. No where
in the settings did I use the FQDN, which is why this error does not make sense to me.
I'm wondering if it's simply the service trying to start too soon prior to the network connection being fully established? We're running this on VMWare 5.5. Also, this PBX Gateway is across a VPN, but it's not an accessibility issue as all other traffic
to the Gateway is flowing properly.
I was hoping someone may have an idea on what to try.
It's not a huge deal because I wrote a PS Script that will check if the service is running and attempt to restart it, if it's not. This solves the issue, but it's more of a patch then a plug and I'd rather have things operating "normally."
Thanks in advance for any suggestions!
-Eric

Alright... well, we had to reboot the server and I checked when the server started back up to verify that the UM service started properly. It still did not, despite being set to Delayed Start now.
So I'm back to being unsure of what to try. I set my PS Script to run at startup and it checks every 15 minutes to ensure UM is running.
It's more of an annoyance that I'd like to not have, but again, not the end of the world.
If anyone else has any ideas, I'd be really grateful.
Thanks!

Similar Messages

  • ADFS 2.0 service does not automatically start after reboot

    Hello,
    We have two ADFS 2.0 servers in a farm.  Any time these servers reboot, the ADFS service does not automatically start, even though the service is set to auto start.  If I manually start the service it starts within 10 seconds.
    The error in the logs show:
    A timeout was reached (30000 milliseconds) while waiting for the AD FS 2.0 Windows Service service to connect.
    The AD FS 2.0 Windows Service service failed to start due to the following error:
    The service did not respond to the start or control request in a timely fashion.
    But after the reboot is completed, I can manually start the service with no problems.  Again, this ONLY happens on restart.  I've searched the forums and found potential solutions for people who have consistent issues with starting ADFS every time.
    Any ideas?

    UPDATE - I built a 3rd ADFS server and was unable to reproduce the problem, until...
    I went in to the service properties of ADFS and saw that even though I specified a Log On As account during the ADFS wizard, it changed itself back to "Network Service".  I re-entered our ADFS service account username and password, it was
    accepted, and I rebooted.  On the next reboot, the service did not start automatically (with the same errors as the other ADFS servers), but I was able to manually start it.
    I then went to the original ADFS server having the problem, switched it to use "Network Service", rebooted, and the service started up properly on reboot.  I then changed it back to the named domain service account, and the issue came right
    back.  There are no other errors in the System Log indicating a problem with anything else.
    So my guess is that something is happening to prevent the service from starting with the named Domain account on server reboot.  But what?

  • OracleOraDb10g_home1TNSListener service does not start

    I am using Win XP. I have installed Oracle 10g.
    OracleOraDb10g_home1TNSListener service does not start. If started manually, it automatically gets stopped.
    As result, if I connect to Orcale 10 database through Java, I get Network Adapter error.
    what I need to do for OracleOraDb10g_home1TNSListener service to start after clicking 'Start' on it through Services in Control Panel/Admin Tools
    Thanks

    Oracle installation was successful.
    after lsnrctl start
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 04-MAR-2006 23:03
    :29
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting tnslsnr: please wait...
    TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
    System parameter file is C:\oracle\product\10.2.0\db_1\network\admin\listener.or
    a
    Log messages written to C:\oracle\product\10.2.0\db_1\network\log\listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc
    Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=uc-52b3c4f41f58.er
    c-wireless.uc.edu)(PORT=1521)))
    TNS-12545: Connect failed because target host or object does not exist
    TNS-12560: TNS:protocol adapter error
    TNS-00515: Connect failed because target host or object does not exist
    32-bit Windows Error: 49: Unknown error
    Listener failed to start. See the error message(s) above...
    After correcting Host in listner.ora, listner started. However before making this change, this service was getting started though listener.ora had wrong host name.
    Thanks.

  • Oidldapd service does not start for OID on LINUX

    Hi,
    I have installed OCS 9.0.3.0.0 on LINUX, all components i.e. Infrastructure, Storage and MiddleTier are installed properly (without giving any error). While trying to start OID with oidmon and oidctl (through command line), oidmon is started but OID is not available.
    Surprisingly oidldapd01.log file is not found (as log registers), where to locate this file ?
    OIDMON.LOG registers the following entries :
    2003/05/01:17:37:16Starting Monitor Process, PID=1374
    2003/05/01:17:37:16OIDLDAPD server terminated normally
    2003/05/01:17:37:16Check log file oidldapd01.log
    2003/05/01:17:37:16Deleting OIDLDAPD instance 1 from Process table
    2003/05/01:17:37:18OIDLDAPD Instance 1 deleted from registry
    2003/05/01:17:37:18ODISRV server terminated normally
    2003/05/01:17:37:18Check log file odisrv00.log
    2003/05/01:17:37:18Deleting ODISRV instance 1 from Process table
    2003/05/01:17:37:19ODISRV Instance 1 deleted from registry
    2003/05/01:17:41:40Updating Process Table...
    2003/05/01:17:41:40Starting OIDLDAPD Server, PID=1478
    2003/05/01:17:41:40Exec of OIDLDAPD Server failed with error=2
    2003/05/01:17:41:41OIDLDAPD Instance 1 added into registry
    2003/05/01:17:41:41Updating Process Table...
    2003/05/01:17:41:51OIDLDAPD server terminated normally
    2003/05/01:17:41:51Check log file oidldapd01.log
    2003/05/01:17:41:51Deleting OIDLDAPD instance 1 from Process table
    2003/05/01:17:41:52OIDLDAPD Instance 1 deleted from registry
    2003/05/01:18:10:15Updating Process Table...
    2003/05/01:18:10:15Starting OIDLDAPD Server, PID=1620
    2003/05/01:18:10:15Exec of OIDLDAPD Server failed with error=2
    2003/05/01:18:10:15OIDLDAPD Instance 1 added into registry
    2003/05/01:18:10:15Updating Process Table...
    2003/05/01:18:10:25OIDLDAPD server terminated normally
    2003/05/01:18:10:25Check log file oidldapd01.log
    2003/05/01:18:10:25Deleting OIDLDAPD instance 1 from Process table
    2003/05/01:18:10:27OIDLDAPD Instance 1 deleted from registry
    Any help ?
    Regards
    Ashwani

    Hi Manuel,
    I tested on my client, and I also keep getting the error 1053, which indicates timeout and the new created service can not be started during the limit time, so you can try to change the service time limit, please note this needs to change registry value,
    Using Registry Editor incorrectly can cause serious problems:
    In Registry Editor, locate, and then right-click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
    a.Point to New, and then click DWORD Value. In the right pane of Registry Editor, notice that New Value #1 (the name of a new registry entry) is selected for editing.
    b.Type ServicesPipeTimeout to replace New Value #1, and then press ENTER.
    c.Right-click the ServicesPipeTimeout registry entry that you created in step c, and then click Modify. The Edit DWORD Value dialog box appears.
    d.In the Value data text box, type TimeoutPeriod, and then click OK
    Refer to:
    Error 1053: The service did not respond to the
    start or control request in a timely fashion - When trying to start the server service.
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang

  • Oracel Service does not start

    I create a service and it starts at times and would'nt at other times. In my services window, all I see is a 'starting' but it never starts. Where should I look. Please help. Thank you.

    Hi Manuel,
    I tested on my client, and I also keep getting the error 1053, which indicates timeout and the new created service can not be started during the limit time, so you can try to change the service time limit, please note this needs to change registry value,
    Using Registry Editor incorrectly can cause serious problems:
    In Registry Editor, locate, and then right-click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
    a.Point to New, and then click DWORD Value. In the right pane of Registry Editor, notice that New Value #1 (the name of a new registry entry) is selected for editing.
    b.Type ServicesPipeTimeout to replace New Value #1, and then press ENTER.
    c.Right-click the ServicesPipeTimeout registry entry that you created in step c, and then click Modify. The Edit DWORD Value dialog box appears.
    d.In the Value data text box, type TimeoutPeriod, and then click OK
    Refer to:
    Error 1053: The service did not respond to the
    start or control request in a timely fashion - When trying to start the server service.
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang

  • JRun4 service does not start!

    I installed JRun 4 trial edition.I have Java SE6.Everything goes well with the installation But JRun can not be started as a WindowsXP service.I have Microsoft WindowsXP Professional SP3.I tried executing the command
    C:\JRun4\bin>jrunsvc.exe -starttimeout 900 " Macromedia JRun Default Server"
    Usage:
    jrunsvc -install <jrun-server> [service-name [service-display [service-descripti
    on]]] [-<jrun-option>...]
    or -remove service-name
    or -start service-name
    or -stop service-name
    or -console service-name [-<jrun-option>...]
    But it I think there is something wrong with how I use it.Your advice please on that too.I am herewith attaching the default error log and the admin error log also for you advice

    Hi Manuel,
    I tested on my client, and I also keep getting the error 1053, which indicates timeout and the new created service can not be started during the limit time, so you can try to change the service time limit, please note this needs to change registry value,
    Using Registry Editor incorrectly can cause serious problems:
    In Registry Editor, locate, and then right-click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
    a.Point to New, and then click DWORD Value. In the right pane of Registry Editor, notice that New Value #1 (the name of a new registry entry) is selected for editing.
    b.Type ServicesPipeTimeout to replace New Value #1, and then press ENTER.
    c.Right-click the ServicesPipeTimeout registry entry that you created in step c, and then click Modify. The Edit DWORD Value dialog box appears.
    d.In the Value data text box, type TimeoutPeriod, and then click OK
    Refer to:
    Error 1053: The service did not respond to the
    start or control request in a timely fashion - When trying to start the server service.
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang

  • MSExchangeMonitoring service does not start

    Hi,
    I have installed the exchange management pack on a SCOM 2012 R2 monitoring server and am trying to monitor a exchange 2010 server. The MSExchangeMonitoring service does not want to start, it just keeps trying but always has the status of "starting"
    i can not seem to find any related errors in the event log. It is running under local system account.
    Does anybody have any clues?
    Thanks in advance.

    Hi Karel,
    The MSExchangeMonitoring service is an optional service in exchange 2010, and it has no dependencies.
    I recommend you refer to the following methods to start it:
    1. Try running the following commands with administrator permission, and check if any helps:
    Stop-Service MSExchangeMonitoring
    Start-Service MSExchangeMonitoring
    2. Try rebooting exchange server and then starting this service manually.
    Best regards,
    Niko Cheng
    TechNet Community Support

  • Server service does not start, error 1075

    "Could not start the Server service on Local Computer - Error 1075:  The dependency  service does not exist or has been marked for deletion"
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Srv]
    "Type"=dword:00000002
    "Start"=dword:00000003
    "ErrorControl"=dword:00000001
    "Tag"=dword:00000006
    "ImagePath"=hex(2):73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,44,00,\
      52,00,49,00,56,00,45,00,52,00,53,00,5c,00,73,00,72,00,76,00,2e,00,73,00,79,\
      00,73,00,00,00
    "DisplayName"="Srv"
    "Group"="Network"
    "Description"="Srv"
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Srv\Security]
    "Security"=hex:01,00,14,80,b8,00,00,00,c4,00,00,00,14,00,00,00,30,00,00,00,02,\
      00,1c,00,01,00,00,00,02,80,14,00,ff,01,0f,00,01,01,00,00,00,00,00,01,00,00,\
      00,00,02,00,88,00,06,00,00,00,00,00,14,00,fd,01,02,00,01,01,00,00,00,00,00,\
      05,12,00,00,00,00,00,18,00,ff,01,0f,00,01,02,00,00,00,00,00,05,20,00,00,00,\
      20,02,00,00,00,00,14,00,8d,01,02,00,01,01,00,00,00,00,00,05,04,00,00,00,00,\
      00,14,00,8d,01,02,00,01,01,00,00,00,00,00,05,06,00,00,00,00,00,14,00,00,01,\
      00,00,01,01,00,00,00,00,00,05,0b,00,00,00,00,00,18,00,fd,01,02,00,01,02,00,\
      00,00,00,00,05,20,00,00,00,23,02,00,00,01,01,00,00,00,00,00,05,12,00,00,00,\
      01,01,00,00,00,00,00,05,12,00,00,00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Srv\Enum]
    "0"="Root\\LEGACY_SRV\\0000"
    "Count"=dword:00000001
    "NextInstance"=dword:00000001
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT]
    "Type"=dword:00000001
    "Start"=dword:00000001
    "ErrorControl"=dword:00000001
    "Tag"=dword:00000005
    "ImagePath"=hex(2):73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,44,00,\
      52,00,49,00,56,00,45,00,52,00,53,00,5c,00,6e,00,65,00,74,00,62,00,74,00,2e,\
      00,73,00,79,00,73,00,00,00
    "DisplayName"="NetBios over Tcpip"
    "Group"="PNP_TDI"
    "DependOnService"=hex(7):54,00,63,00,70,00,69,00,70,00,00,00,00,00
    "DependOnGroup"=hex(7):00,00
    "Description"="NetBios over Tcpip"
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Linkage]
    "OtherDependencies"=hex(7):54,00,63,00,70,00,69,00,70,00,00,00,00,00
    "Bind"=hex(7):5c,00,44,00,65,00,76,00,69,00,63,00,65,00,5c,00,54,00,63,00,70,\
      00,69,00,70,00,5f,00,7b,00,45,00,42,00,33,00,44,00,36,00,31,00,41,00,42,00,\
      2d,00,43,00,30,00,43,00,38,00,2d,00,34,00,38,00,35,00,35,00,2d,00,41,00,37,\
      00,45,00,38,00,2d,00,42,00,46,00,38,00,38,00,32,00,36,00,33,00,37,00,32,00,\
      30,00,41,00,31,00,7d,00,00,00,5c,00,44,00,65,00,76,00,69,00,63,00,65,00,5c,\
      00,54,00,63,00,70,00,69,00,70,00,5f,00,7b,00,43,00,36,00,39,00,31,00,43,00,\
      30,00,42,00,35,00,2d,00,30,00,38,00,35,00,41,00,2d,00,34,00,35,00,41,00,41,\
      00,2d,00,39,00,36,00,42,00,35,00,2d,00,35,00,41,00,43,00,36,00,44,00,33,00,\
      37,00,35,00,35,00,36,00,33,00,39,00,7d,00,00,00,5c,00,44,00,65,00,76,00,69,\
      00,63,00,65,00,5c,00,54,00,63,00,70,00,69,00,70,00,5f,00,7b,00,38,00,34,00,\
      38,00,38,00,33,00,35,00,46,00,34,00,2d,00,33,00,37,00,41,00,41,00,2d,00,34,\
      00,32,00,44,00,39,00,2d,00,41,00,34,00,45,00,31,00,2d,00,34,00,41,00,46,00,\
      32,00,43,00,44,00,44,00,30,00,31,00,37,00,35,00,30,00,7d,00,00,00,5c,00,44,\
      00,65,00,76,00,69,00,63,00,65,00,5c,00,54,00,63,00,70,00,69,00,70,00,5f,00,\
      7b,00,45,00,38,00,33,00,34,00,42,00,34,00,41,00,38,00,2d,00,37,00,37,00,31,\
      00,46,00,2d,00,34,00,31,00,37,00,42,00,2d,00,38,00,33,00,46,00,39,00,2d,00,\
      39,00,39,00,39,00,32,00,42,00,38,00,41,00,43,00,41,00,43,00,45,00,42,00,7d,\
      00,00,00,00,00
    "Route"=hex(7):22,00,54,00,63,00,70,00,69,00,70,00,22,00,20,00,22,00,7b,00,45,\
      00,42,00,33,00,44,00,36,00,31,00,41,00,42,00,2d,00,43,00,30,00,43,00,38,00,\
      2d,00,34,00,38,00,35,00,35,00,2d,00,41,00,37,00,45,00,38,00,2d,00,42,00,46,\
      00,38,00,38,00,32,00,36,00,33,00,37,00,32,00,30,00,41,00,31,00,7d,00,22,00,\
      00,00,22,00,54,00,63,00,70,00,69,00,70,00,22,00,20,00,22,00,7b,00,43,00,36,\
      00,39,00,31,00,43,00,30,00,42,00,35,00,2d,00,30,00,38,00,35,00,41,00,2d,00,\
      34,00,35,00,41,00,41,00,2d,00,39,00,36,00,42,00,35,00,2d,00,35,00,41,00,43,\
      00,36,00,44,00,33,00,37,00,35,00,35,00,36,00,33,00,39,00,7d,00,22,00,00,00,\
      22,00,54,00,63,00,70,00,69,00,70,00,22,00,20,00,22,00,4e,00,64,00,69,00,73,\
      00,57,00,61,00,6e,00,49,00,70,00,22,00,00,00,00,00
    "Export"=hex(7):5c,00,44,00,65,00,76,00,69,00,63,00,65,00,5c,00,4e,00,65,00,74,\
      00,42,00,54,00,5f,00,54,00,63,00,70,00,69,00,70,00,5f,00,7b,00,45,00,42,00,\
      33,00,44,00,36,00,31,00,41,00,42,00,2d,00,43,00,30,00,43,00,38,00,2d,00,34,\
      00,38,00,35,00,35,00,2d,00,41,00,37,00,45,00,38,00,2d,00,42,00,46,00,38,00,\
      38,00,32,00,36,00,33,00,37,00,32,00,30,00,41,00,31,00,7d,00,00,00,5c,00,44,\
      00,65,00,76,00,69,00,63,00,65,00,5c,00,4e,00,65,00,74,00,42,00,54,00,5f,00,\
      54,00,63,00,70,00,69,00,70,00,5f,00,7b,00,43,00,36,00,39,00,31,00,43,00,30,\
      00,42,00,35,00,2d,00,30,00,38,00,35,00,41,00,2d,00,34,00,35,00,41,00,41,00,\
      2d,00,39,00,36,00,42,00,35,00,2d,00,35,00,41,00,43,00,36,00,44,00,33,00,37,\
      00,35,00,35,00,36,00,33,00,39,00,7d,00,00,00,5c,00,44,00,65,00,76,00,69,00,\
      63,00,65,00,5c,00,4e,00,65,00,74,00,42,00,54,00,5f,00,54,00,63,00,70,00,69,\
      00,70,00,5f,00,7b,00,38,00,34,00,38,00,38,00,33,00,35,00,46,00,34,00,2d,00,\
      33,00,37,00,41,00,41,00,2d,00,34,00,32,00,44,00,39,00,2d,00,41,00,34,00,45,\
      00,31,00,2d,00,34,00,41,00,46,00,32,00,43,00,44,00,44,00,30,00,31,00,37,00,\
      35,00,30,00,7d,00,00,00,5c,00,44,00,65,00,76,00,69,00,63,00,65,00,5c,00,4e,\
      00,65,00,74,00,42,00,54,00,5f,00,54,00,63,00,70,00,69,00,70,00,5f,00,7b,00,\
      45,00,38,00,33,00,34,00,42,00,34,00,41,00,38,00,2d,00,37,00,37,00,31,00,46,\
      00,2d,00,34,00,31,00,37,00,42,00,2d,00,38,00,33,00,46,00,39,00,2d,00,39,00,\
      39,00,39,00,32,00,42,00,38,00,41,00,43,00,41,00,43,00,45,00,42,00,7d,00,00,\
      00,00,00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters]
    "NbProvider"="_tcp"
    "NameServerPort"=dword:00000089
    "CacheTimeout"=dword:000927c0
    "BcastNameQueryCount"=dword:00000003
    "BcastQueryTimeout"=dword:000002ee
    "NameSrvQueryCount"=dword:00000003
    "NameSrvQueryTimeout"=dword:000005dc
    "Size/Small/Medium/Large"=dword:00000001
    "SessionKeepAlive"=dword:0036ee80
    "TransportBindName"="\\Device\\"
    "EnableLMHOSTS"=dword:00000001
    "EnableProxy"=dword:00000002
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters\Interfaces]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters\Interfaces\Tcpip_{848835F4-37AA-42D9-A4E1-4AF2CDD01750}]
    "NameServerList"=hex(7):00,00,00,00
    "RASFlags"=dword:00000001
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters\Interfaces\Tcpip_{C691C0B5-085A-45AA-96B5-5AC6D3755639}]
    "NameServerList"=hex(7):00,00
    "NetbiosOptions"=dword:00000002
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters\Interfaces\Tcpip_{E834B4A8-771F-417B-83F9-9992B8ACACEB}]
    "NameServerList"=hex(7):00,00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters\Interfaces\Tcpip_{EB3D61AB-C0C8-4855-A7E8-BF88263720A1}]
    "NameServerList"=hex(7):00,00
    "NetbiosOptions"=dword:00000002
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Security]
    "Security"=hex:01,00,14,80,e8,00,00,00,f4,00,00,00,14,00,00,00,30,00,00,00,02,\
      00,1c,00,01,00,00,00,02,80,14,00,ff,01,0f,00,01,01,00,00,00,00,00,01,00,00,\
      00,00,02,00,b8,00,08,00,00,00,00,00,14,00,8d,01,02,00,01,01,00,00,00,00,00,\
      05,0b,00,00,00,00,00,18,00,9d,01,02,00,01,02,00,00,00,00,00,05,20,00,00,00,\
      23,02,00,00,00,00,18,00,ff,01,0f,00,01,02,00,00,00,00,00,05,20,00,00,00,20,\
      02,00,00,00,00,18,00,ff,01,0f,00,01,02,00,00,00,00,00,05,20,00,00,00,25,02,\
      00,00,00,00,14,00,fd,01,02,00,01,01,00,00,00,00,00,05,12,00,00,00,00,00,14,\
      00,40,00,00,00,01,01,00,00,00,00,00,05,13,00,00,00,00,00,14,00,40,00,00,00,\
      01,01,00,00,00,00,00,05,14,00,00,00,00,00,18,00,9d,01,02,00,01,02,00,00,00,\
      00,00,05,20,00,00,00,2c,02,00,00,01,01,00,00,00,00,00,05,12,00,00,00,01,01,\
      00,00,00,00,00,05,12,00,00,00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Enum]
    "0"="Root\\LEGACY_NETBT\\0000"
    "Count"=dword:00000001
    "NextInstance"=dword:00000001
    c:\windows\system32\drivers
    srv.sys
    5.2.3790.4832 (srv03_sp2_gdr.110217-0526)
    mrxsmb.sys
    5.2.3790.4883 (srv03_sp2_gdr.110706-0334)
    rdbss.sys
    5.2.3790.4671 (srv03_sp2_gdr.100224-1541)

    Hi jenhwa,
    Please run
    sfc /scannow command to scan all protected system files. Any find?
    In addition, please type
    Regedit in RUN to open Registry Editor, then follow the path:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer
    Please right-click the
    DependOnService entry, and then click "Modify...".
    In the Value data box, please check if just has
    SamSSand
    Srv services.
    In addition, please check the System event log if find relevant errors.
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Inventory service does not start 610 failed login

    L.S.
    Netware 6.5, SP6
    ZEN 7.01SP1IR1
    Sybase database
    Standalone server
    My inventory service does not start. I've looked around but did not yet find the solution. I did have an error I've read nothing about:
    logger screen: java:Class com.novell.....ZENWorksInventoryservicemanager exited with status -1
    C1, Inventory service object shows 610: database location policy is not configured (but it is)
    NRM: health, failed login: user: .CN=Server package_ZENSERVER:Netware:ZENDateBase.O=context.T= tree
    Any suggestions
    Thomas Roes

    Thomasroes,
    either of these help?
    http://www.novell.com/support/php/se...1%200%20506894
    http://www.novell.com/support/php/se...1%200%20506894
    Shaun Pond

  • PIA service does not start

    Hi,
    my webserver is Weblogic (9.2, Tools 8.49 , HRMS90). PIa service does not start automaticaly when I start/boot the server. I should run startPIA.cmd. And then I can connect in 4/3.
    Do you have any idea for that ?
    In windows Evenetlog it says Event Type:     Warning
    Event Source:     beasvc
    Description:
    peoplesoft-PIA service stopped
    Thank for help.

    after u install PIA , u can start the server from the cmd by issuing a command called StartPIA.cmd ,
    or u can tie the domain to a service type called NT service, and schedule the service to be automatic. it keeps running as long as ur box is up. once u reboot it , service stops for a while and start again. this is automatic type of bringing up the server.
    ur bEA weblogic when installed sets the path for jdk and jre which are used by the server to come up properly.
    even after this if u have trouble, please paste the logs. logs are found under PS_HOME\webserver\domain_name\logs
    bea logs are under bea DIR.
    Thnks!

  • Opmn service does not start when try to start Oracle BI Services

    Hi ,
    I was able to install OBIEE 11g on my laptop and it worked fine for two days. Today when I try to login to rpd and type my user name and password I get the error that my user name and password is not correct. I tried to restart the machine and now I am not able to start opmn service.
    When I do Start>Oracle Business Intelligence (1)>Start BI Services, the script run and two command line windows open and about 10 minutes later get the last line that server started in RUNNING mode, but some how Oracle Process Manager (instance) service does not start. It started two days ago when I was able to login to OBIEE 11g.
    If I try to go to OBIEE 11g Home page I get this error "Error 500- Internal server error from RFC 2068 Hypertext Transfer Protocol- HTTP/1.1: 10.5.1 500 Internal server error
    Any Idea how to fix this one.
    Thanks

    Maybe you need to tick the "use fully qualified names" check box and make sure that you have the schema object created (as a "folder" between the database and the tables in the physical layer).

  • Service created with New-Service does not start

    Hello,
    I am trying to create a working service using the New-Service cmdlet. I tried a bunch of different examples, I found on the internet like this one from technet:
    new-service -name TestService -binaryPathName "C:\WINDOWS\System32\svchost.exe -k netsvcs" -dependson NetLogon -displayName "Test Service" -StartupType Manual -Description "This is a test service."
    The service gets created and is listed in services.msc and Get-Service but I cannot start it. Ever. The state changes to "Starting" but that's all.
    I tried it on different machines with different Windows- and PowerShell versions using elevated PS-consoles.
    Thanks,
    Manuel

    Hi Manuel,
    I tested on my client, and I also keep getting the error 1053, which indicates timeout and the new created service can not be started during the limit time, so you can try to change the service time limit, please note this needs to change registry value,
    Using Registry Editor incorrectly can cause serious problems:
    In Registry Editor, locate, and then right-click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
    a.Point to New, and then click DWORD Value. In the right pane of Registry Editor, notice that New Value #1 (the name of a new registry entry) is selected for editing.
    b.Type ServicesPipeTimeout to replace New Value #1, and then press ENTER.
    c.Right-click the ServicesPipeTimeout registry entry that you created in step c, and then click Modify. The Edit DWORD Value dialog box appears.
    d.In the Value data text box, type TimeoutPeriod, and then click OK
    Refer to:
    Error 1053: The service did not respond to the
    start or control request in a timely fashion - When trying to start the server service.
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang

  • Microsoft Forefront Server Protection for Exchange Registration Service does not start automatically

    Hello,
    I am having an issue when I start my TMG 2010 machine:
    (*TMG 2010 + Forefront protection for Exchange + Exchange Edge server role, acting like a SMTP relay and Antispam filter)
    The service "Microsoft Forefront Server Protection for Exchange Registration Service"
    does not start, it is set to "Manual".
    I tried to find some information about which services should be started and which should not, but I cannot find such information, not even in Technet (my fault probably).
    Thanks in advance.
    Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)

    Hi,
    Have you received any errors in event logs when
    you started the Microsoft Forefront Server Protection for Exchange Registration Service?
    Based on my research,
    Microsoft Forefront Server Protection Controller service is a dependency of the Microsoft Forefront Server Protection Registration service and the Microsoft Forefront
    Server Protection Registration service is a dependency of the Microsoft Exchange Transport service.
    The Microsoft Forefront Server Protection Registration service normally only runs for a brief time (less than a minute) when FPE initializes. It then shuts
    down and does not need to be running for transport scanning to occur.
    You can refer to the link below:
    Services
    Best regards,
    Susie

  • Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

    Hi,
    I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
    Tried manually start services, it started successfully but again goes down within few seconds automatically.
    Reboot server. but no luck.
    Any help.
    MD

    Hi,
    I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
    In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
    Thanks.
    Niko Cheng
    TechNet Community Support

  • [SOLVED] systemd adsl service does not start

    After the today's upgrade of my system I get lines like this in my journal, as the adsl service does not want to start.
    # router systemd[522]: Failed at step EXEC spawning /usr/sbin/pppoe-start: No such file or directory
    The problem is, that pppoe-start is in /usr/bin/ and not in /usr/sbin. According to pacman (pacman-Ql rp-pppoe) /usr/bin/ is the correct location.
    I really don't know, why systemd is trying to launch it, because even the service file (/usr/lib/systemd/system/adsl.service) points to the correct location.
    [Unit]
    Description=ADSL Deamon
    [Service]
    Type=forking
    ExecStart=/usr/bin/pppoe-start
    ExecStop=/usr/bin/pppoe-stop
    [Install]
    WantedBy=multi-user.target
    The service is launching and stopping with pppoe-start and pppoe-stop.
    When launched, it also shuts down fine when stopping it by
    systemctl stop adsl
    Why the hell is it trying to launch from /usr/sbin/?
    Last edited by scar (2013-06-04 13:07:23)

    It goes definitely against any logic.
    The service file looks good, but I've copied it to /usr/lib/systemd/system/bdsl.service. Same contents - and the new one launches succesfully.
    I've deleted the original ...adsl.service file, verified that it disappeared, copied it back from the new bdsl.service file, and it still does not launch.
    [EDIT]
    I've erased the drive, restored the system from a 1 week old backup, started it - everything worked. Then I'v updated the whole system, including the rp-pppoe package, and the adsl service is failing again.
    Downgrading solves the problem. Should I file a bug report?
    Last edited by scar (2013-06-01 10:14:41)

Maybe you are looking for