Unable print scheduled report on network printer using BOEXI 3.0

Hi,
I'm unable to print a scheduled report on network printer using BOE XI 3.0. I get the following error
Error Message: Error in File ~ce6a054be1a25b52.rpt: Request cancelled by the user. ]
Has anyone encountered this kind of problem and know what the solution is?
Thanks,

Hey Falk,
Thanks for the response.
I can print on a network printer after I changed 'Crystal Reports Job Server' to run under a user account that has privileges to access the printer.
To answer your questions regarding the problem:
>Can you schedule the report successfully ?
>>Yes I was able to schedule the report successfully
>Can you print the report successfully?
>>NO the scheduled task would fail with the error message as posted above.
Thanks,

Similar Messages

  • Urgent..blank report on network printer

    Dear All,
    i've a report which print direct to a network printer i specify the full network path in DESNAME where destype = printer but the paper in the printer move but nothing is printed.
    when i let destype=screen and specify the network printer from normal dialog it prints fine..
    more question how can i know that the report server has access to that printer
    i'm using REPORTS 6i
    please help

    If it was that urgent I would have supplied some more information. One very, very, very important fact to know is whether it's Client/Server or Webbased reports, don't you think?
    Have you been on the Reports Home page yet?
    http://otn.oracle.com/products/reports
    There're tons of good white papers there, including one regarding printing on the net.
    Also this search on Metalink gives me lots of usuful documents: reports 'network printer'
    Regards,
    Martin

  • Error - Printing a report directly to printer

    Hi,
    i'm using oracle forms 9i and i'm trying to print a report directly to printer. I using the code above:
    SET_REPORT_OBJECT_PROPERTY(ReportId,REPORT_DESFORMAT,'PDF');
    SET_REPORT_OBJECT_PROPERTY(ReportId,REPORT_SERVER,GetReportTnsName);
    IF ReportDesType = 'CACHE' THEN
    SET_REPORT_OBJECT_PROPERTY(ReportId,REPORT_DESTYPE,CACHE);
    ReportServerJob:=RUN_REPORT_OBJECT(ReportId, PList);
    rep_status := report_object_status(ReportServerJob);
    IF rep_status=’FINISHED’ THEN
    JobId := substr(ReportServerJob,length(GetReportTnsName)+2,length(ReportServerJob));
    WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid'||JobId||'?server='||GetReportTnsName,'_blank');
    ELSE
    message ('Error’);
    END IF;
    -- logic for sending report directly to printer
    ELSIF ReportDesType = 'PRINTER' then
    SET_REPORT_OBJECT_PROPERTY(ReportId,REPORT_DESTYPE,PRINTER);
    SET_REPORT_OBJECT_PROPERTY(ReportId,REPORT_DESNAME,:parameter.p_print);
    ReportServerJob:=RUN_REPORT_OBJECT(ReportId, PList);
    rep_status := report_object_status(ReportServerJob);
    IF rep_status=’FINISHED’ THEN
    message ('Report sent to printer successfully');
    ELSE
    --handle errors
    message ('Error’);
    END IF;
    end if ;
    i get this error :
    REP-50157: Erro no envio do ficheiro para a impressora lp65. Sair com o código de erro 64
    NEED HELP !!
    Regards,

    The printer has to be known on the server where the Reports service runs.
    Also, the user who runs the Reports service has to have access to that printer. If you are running on Windows, Reports Service runs as Local system by default. Change that to a real (domain) user, who has access to the printer.

  • How do I make my HP P2055dn printer into a wireless network printer for 5 computers

    How do I make my HP P2055dn printer into a wireless network printer for 5 computers? Windows versions on computers used are  XP,Vista & 7.
    Thanks
    Leon

    Unplug the USB cable from the printer.  Plug your printer into your wireless router with an Ethernet cable.
    Next, on each computer, get the latest software for your printer from the "Support & Drivers" link at the top of this page.  Install it and select "Network" installation when it asks.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Printing to a Windows Network printer after 10.4.9 upgrade

    Very desperate with this. We have a couple macs at the office and after a move and some software updates all cannot print via a Windows network printer.
    Unable to connect to SAMBA host is the only error we receive.
    I checked my smb:\\ syntax, I have tried IP address, tried picking from the list (which by the way the printers do show up yet you cannot print to them)
    Extremely frustrating and with an Anti-Mac IT director this gives him more ammo to say Macs are irrelavant in the workplace.
    The Macs are bound to Windows Active Directory and the users are Active Directory users. We do not have a Mac OS X server. Our printer server is Windows 2003 SP1, the printers range from an HP LaserJet 4100 to a Xerox WorkCentre 24, all do not work.
    The ONLY network printer that appears to work is the printer associated during the login
    Curious if anyone with 10.4.7 and higher have problems....

    More info...here is the cups/error log when trying to print from a newly added Windows network printer...looking for some help on this....
    I [22/May/2007:12:22:45 -0400] Setting FPS2ColorXerox device-uri to "smb://HOPE/fps2.projecthope.org/FPS2-Color Xerox" (was "file:/dev/null".)
    I [22/May/2007:12:22:45 -0400] Setting FPS2ColorXerox printer-is-accepting-jobs to 1 (was 0.)
    I [22/May/2007:12:22:45 -0400] Setting FPS2ColorXerox printer-state to 3 (was 5.)
    I [22/May/2007:12:22:45 -0400] Saving printers.conf...
    I [22/May/2007:12:22:45 -0400] New printer 'FPS2ColorXerox' added by ''.
    I [22/May/2007:12:23:05 -0400] Saving printers.conf...
    I [22/May/2007:12:23:05 -0400] Printer 'FPS2ColorXerox' modified by ''.
    I [22/May/2007:12:23:16 -0400] Saving printers.conf...
    I [22/May/2007:12:23:16 -0400] Printer 'FPS2ColorXerox' modified by ''.
    I [22/May/2007:12:23:16 -0400] Saving printers.conf...
    I [22/May/2007:12:23:16 -0400] Printer 'FPS2ColorXerox' modified by ''.
    I [22/May/2007:12:23:20 -0400] Saving printers.conf...
    I [22/May/2007:12:23:20 -0400] Printer 'FPS2ColorXerox' modified by ''.
    I [22/May/2007:12:23:37 -0400] Adding start banner page "none" to job 5.
    I [22/May/2007:12:23:37 -0400] Adding end banner page "none" to job 5.
    I [22/May/2007:12:23:37 -0400] Job 5 queued on 'FPS2ColorXerox' by 'js721'.
    I [22/May/2007:12:23:37 -0400] Started filter /usr/libexec/cups/filter/cgpdftops (PID 6183) for job 5.
    I [22/May/2007:12:23:37 -0400] Started filter /usr/libexec/cups/filter/pstops (PID 6184) for job 5.
    I [22/May/2007:12:23:37 -0400] Started filter /Library/Printers/Xerox/filter/XeroxWCPFilter (PID 6185) for job 5.
    I [22/May/2007:12:23:37 -0400] Started backend /usr/libexec/cups/backend/smb (PID 6186) for job 5.
    E [22/May/2007:12:23:39 -0400] [Job 5] Connection failed with error NTSTATUS_BAD_NETWORKNAME
    E [22/May/2007:12:23:39 -0400] [Job 5] Unable to connect to SAMBA host, will retry in 60 seconds...DEBUG: Page = 612x792; 11,11 to 601,781
    E [22/May/2007:12:24:39 -0400] [Job 5] Connection failed with error NTSTATUS_BAD_NETWORKNAME

  • Printing from iPad - Why do I need third party app to print to a local network printer??

    Why do I need to pay for a third party app to print to ALL local network printer?? I understand that only some printers are compatable with iPads, but yet application like "iCanPrint" allow me to print just fine to a printer connected to my network. Why can't Apple include this as one of its features? Technology is apparently there?

    For that, and the many other apps to work, you need to be running a pc or Mac on the network.  The answer is drivers.  Every printer in the world needs a driver.  There simply is not enough space on a pad to load every possible printer driver that might be in play.  in the pc world, the operating system comes preloaded with hundreds of common drivers, and when you buy and install a new printer, you download the new drivers for that new printer.
    That all just will not work on a pad or phone.  So apple flipped the issue upside down, and said...'here is the printer driver we will make standard for its devices.  We call it AirPrint.  Include this in your printer'.    A lot of manufacturers have, and more printers are enabled each month.   
    So your choice is pretty basic.  You can buy an AirPrint enabled printer and print directly to it, or buy a non AirPrint printer, or use the one you have, and rely on your pc to act as the translation device to manage the print job.

  • Schedule CR reports to network printer

    Hi,
    I would like to schedule a Crystal Report 2008 to a network printer as destination; we are using BOE XI 3.1 server.
    In the destination settings of the CrystalReportsJobServer I only can select FTP and E-Mail.
    Is my undertaking possible without using the SDK?
    Thanks!

    >
    wavery wrote:
    > You should be able to specify the printer in the scheduling settings of the report itself in Infoview.
    Oh yes, I can see at "Print Settings" that I can specify a printer ("Set layout to: Specify printer settings"). However, I can't specify a printer in the "Destination" settings. So I can't do a scheduling, after my opinion?

  • Scheduled Report Output to Printer

    Hi Guys,
    hope you are all well.
    Can someone help me.  I am have created a report and set this to be schedule at X time.  I need the report output via Business Objects XI to be to Printer.
    I have set up a printer and set it as a shared printer on the same server BO runs on.  I have also set the printer to Default.  When I schedule the report and set the Print Settings to Default Printer it does not print...no error messages...but no print.  Helppppp as I am going mad.
    Many thanks

    We just recently migrated to XI R2 on a new server, and did not consider the print settings...until a user noticed they could not print like normal
    We recreated the printers on the new server, and people could then choose a specific printer now. (We named the printers the same as the print ID on the server.)
    However, people could not choose Default Printer in Infoview (during Schedule). When they chose it, the report would be successful, but we were not sure where the output would go.
    I found a few articles on Knowledge base, and I think #1 and #2 may be our best alternatives.
    1202786 - A Crystal report printed through InfoView does not use the default printer on the client computer
    1203768 - The default printer is not chosen when printing from Infoview
    This last one seems little drastic - all scheduled reports on a jobs server would take the behavior of the job server. This seems excessive.
    1217095 - Report does not print when scheduled to printer in Crystal Enterprise or BusinessObjects Enterprise
    Article #1 &2 will require retooling of the rpt files, but we plan to address the user issues on a per report basis.
    Walter

  • Problem running reports to network printer

    Application Server Enterprise Edition 10g (9.0.4.1)
    Customer is having some difficulty printing reports to printers attached to client PCs and shared on the network. Occasionally, when a report is requested by the application with DESTYPE=PRINTER, DESFORMAT=DFLT and DESNAME=\\<PC>\<server share>, the status of the report remains "Opening report" and it never completes and cannot be removed. The report server (and dependent services) must be restarted to free the engine. The report is requested from a Forms application via a Report object.
    Here's detail from the Report Server engine trace file (traceOpts=trace_all):
    Debug 50103 (EngineImpl:setCommandLine): Running
    Info 50132 (EngineImpl:setCommandLine): Get command line: userid="ELSIEM paramform="NO" jobname="flysheet.rep" p_cov_effdt="20030315" desname="\\oldmelishal155\wc_hp4" p_rcvd_dt="" p_carrid="24724" p_ar_amt="" authid="ANONYMOUS" destype="printer" p_type="POL" batch="YES" p_ar_code="" report="flysheet.rep" background="yes" expiredays="0" desformat="DFLT" p_polnbr="08WC001094"
    Debug 50103 (EngineImpl:setCommandLine): Quit
    Debug 50103 (EngineImpl:run): Running
    Error 50103 (C Engine): 11:31:47 ERR REP-34551: BACKGROUND is deprecated. See help for more information.
    Error 50103 (C Engine): LOG :
    Error 50103 (C Engine): Logged onto server:
    Error 50103 (C Engine): Username: ELSIEM
    Error 50103 (C Engine):
    Error 50103 (rwfdt:rwfdtprint): Distributing the report
    Error 50103 (rwfdt:rwfdtpredo): running
    Error 50103 (rwfdt:rwfdtpredo): no preformat of pages requested, quit
    Error 50103 (rwfdt:rwfdtni_NextInstance): running
    Error 50103 (rwfdt:rwfdtni_NextInstance): quit
    Error 50103 (rwfdt:rwfdtgcf_GenCachefile): running
    Error 50103 (rwfdt:rwfdtgcf_GenCachefile): Cache file is e:\Spectrum\Cache\Test\45525639.eps
    Error 50103 (rwfdt:rwfdtgcf_GenCachefile): quit
    Error 50103 (rwfdt:rwfdtprint): caching output from backend drivers
    The last line appears to be the culprit. It seems as if the engine is attempting to communicate with the printer but failing. While this report was still "active" another request was made about 3 hours later that printed without issue.
    The printer's host OS is XP. The printer is a HP LaserJet 5si with up-to-date drivers (PCL 5e).
    Are there any specific issues with HP printers? Any ideas how to proceed with this problem? I've search high and low on Metalink and have not seen anything like this. I'd appreciate any help.
    Thanks,
    Robert Glossip

    >
    wavery wrote:
    > You should be able to specify the printer in the scheduling settings of the report itself in Infoview.
    Oh yes, I can see at "Print Settings" that I can specify a printer ("Set layout to: Specify printer settings"). However, I can't specify a printer in the "Destination" settings. So I can't do a scheduling, after my opinion?

  • Unable to print PDF reports on laser printer?

    Hi
    Our requirement is to print the PDF reports directly on the laser printer after submitting through concurrent requests. We have configured the local printer attached to the user, installed printer as network printer on IBM AIX server and configured the printer configuration in ERP instance. Whenever, we print garbage is printing. Then came across this metalink document (How To Print XML Publisher PDF Reports From The Concurrent Manager [ID 338990.1]). According this document, i have downloaded PDF converter 'xpdf' through this link http://www.foolabs.com/xpdf.
    As far as i know, extracting the xpdf.tar file itself will install this software. Modified and un-commented this line pasta_pdf.cfg file with 'preprocess=pdftops {infile} {outfile}' command. Still the printer is printing garbage.
    How to verify that XPDF is installed properly or not?
    Regards

    I think that means tool is either not installed or not in path:-
    "The Xpdf language support packages include CMap files, text encodings, and various other configuration information necessary or useful for specific character sets. (They do not include any fonts.) Any or all of these can be installed by simply unpacking the tar file and adding a few lines to your xpdfrc configuration file (see the README file inside each package for details).
    have you seen what needs to be changed in xpdfrc configuration file?
    Thanks,
    JD

  • Gnome 3 reports a network printer as "not connected",but prints fine

    Hi,
    I got the same problem mentioned here as "Other issue": https://bbs.archlinux.org/viewtopic.php?id=119248
    When I print on my network printer it always says "printer is not connected" at first (popup in gnome shell) but then it prints fine.
    I think it has something to do with CUPS or some settings of the network card (inside the Kyocera FS-1020D) -> I have disabled the whole apple things like Bonjour etcpp.
    In the mentioned thread there are several perople reporting this issue - did anyone solve it?

    bones wrote:No such warning when I logged into other desktop environments.
    That's intresting .. maybe it is a gnome bug? I am also using Gnome 3.2.
    Last edited by Evilandi666 (2011-10-18 11:55:05)

  • Error in Printing Crystal Report Directly to Printer using SDK Code

    Hello ,
    I am trying to print a crystal report created in SAP Crystal Reports 2008 through SDk Code using one parameter
    as (Document Number).But While running the Code the Report is not getting printed and also the system is
    not able to fetch the correct data in the report using the supplied parameter .
    I am using Visual Studio 2005 Crystal Report dll s in my code :-
    Imports CrystalDecisions.CrystalReports.Engine
    Imports CrystalDecisions.Shared
    Imports CrystalDecisions.CrystalReports
    Imports System
    Imports System.Data.SqlClient
    Imports System.IO
    For Clarification i am pasting my code below :-
                Dim oRpt As ReportDocument
                oRpt = New ReportDocument
                oRpt.Load(Path)
                With crConnectionInfo
                    .ServerName = Server
                    .DatabaseName = Database
                    .UserID = User
                    .Password = Password
                End With
                CrTables = oRpt.Database.Tables
                For Each CrTable In CrTables
                    crtableLogoninfo = CrTable.LogOnInfo
                    crtableLogoninfo.ConnectionInfo = crConnectionInfo
                    CrTable.ApplyLogOnInfo(crtableLogoninfo)
                Next
                oRpt.ParameterFields("Document Number").CurrentValues.AddValue(Parameter)
                If Printer <> "" Then
                    oRpt.PrintOptions.PrinterName = Printer
                End If
                oRpt.PrintToPrinter(Copies, False, 0, 1)
            Catch ex As Exception
                SBO_Application.MessageBox(ex.Message)
            End Try
    Please suggest me what i have to do in my code to print the report with correct data in report.
    Thanks & Regards,
    Amit

    k

  • Unable to connect to my network printer

    I have tried to cannect my printer to the same network that my Mac connecting, but a windows pop out:
    " Unable to verify the printer on your network. Unable to connect to ‘192.168.0.101.’ due to an error. Would you still like to create the printer? "
    Anyone can teach me how to do? Thanks a lot!

    System Preferences / Printers & Scanners
    next click + , Add Printer or Scanner ...
    on the next pane click the IP icon - the globe
    In the Address field type in the printer's IP, which you know is 192.168.0.101
    (the Mac will automatically fill in another field)
    click Add.

  • How Can I print my report through character mode using DOS, very very urgent

    Hi all
    I would like to print my reports instead of from windows based, I want to print through DOS mode. While giving dos mode printouts report builder is hanging and comming out. Any help will be appreciated.
    Thanks
    Reddy

    Hi Reddy,
    Here is the solution.
    At Dos\> ORACLE_HOME\BIN\RWRUN60 <followed by the report name and desired arguments >
    srini

  • How to printing oracle report by specific printer name  on solaris?

    When running reports
    -http://host/reports/rwservlet?destype=PRINTER&desname=printername&desformat=dflt.prt&report=test.rdf&userid=test/test@TEST&MODE=CHARACTER
    report with destype=printer desname=printername, the report fails with REP-50159 Executed successfully but there were some errors when distribute the output
    if set default printer by add PRINTER=printername export PRINTER; in uiprint.txt
    it can print to printer.
    i found document id 394554.1 in metalink but it can't fix problem.
    https://metalink.oracle.com/metalink/plsql/f?p=130:14:342229662272785964::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,394554.1,1,1,1,helvetica
    To fix the problem, execute the following steps:
    1. Take a backup of opmn.xml
    2. Edit opmn.xml and include the path information of the new printer:
    For In-process report server add the path information within <OC4J_BI_Forms>
    Eg:
    <process-type id="OC4J_BI_Forms" module-id="OC4J">
    <environment>
    <variable id="DISPLAY" value="localhost:0"/>
    <variable id="LD_LIBRARY_PATH"
    value="D:\Oracle\product\FRHome_1\lib32:D:\Oracle\product\FRHome_1\lib"/>
    <variable id="PATH" value="//printserver;D:/Oracle/product/FRHome_1/bin;................./>
    </environment>
    Here //printserver is the network drive where is printer is installed.
    For standalone report server add the path information within <reportservername>
    Eg:
    <ias-component id="standalonerepsvr01" status="enabled" id-matching="false">
    <process-type id="ReportsServer" module-id="ReportsServices">
    <process-set id="standalonerepsvr01" restart-on-death="true" numprocs="1">
    <environment>
    <variable id="DISPLAY" value="localhost:0"/>
    <variable id="LD_LIBRARY_PATH"
    value="D:\Oracle\product\FRHome_1\lib32:D:\Oracle\product\FRHome_1\lib"/>
    <variable id="PATH" value="//printserver;D:/Oracle/product/FRHome_1/bin;........../>
    </environment>
    3. Reload opmn : opmnctl reload
    4. Restart opmn: opmnctl stopall , opmnctl startall
    5. Run the report with destype=printer and desname=newprintername
    my config (solaris)
    oracle application server release 2 (10.1.2.0.2)
    i used axis printserver name is SZ_R02.
    <process-type id="OC4J_BI_Forms" module-id="OC4J">
    <environment>
    <variable id="DISPLAY" value="localhost:0"/>
    <variable id="LD_LIBRARY_PATH_64" value="/data/app/mid/lib:/data/app/mid/network/lib32:/data/app/mid/lib32:/data/app/mid/lib:/data/app/mid/network/lib::/data/app/mid/jdk/jre/lib/sparcv9"/>
    <variable id="LD_LIBRARY_PATH" value="/data/app/mid/lib32:/data/app/mid/lib:/data/app/mid/network/lib32:/data/app/mid/lib32:/data/app/mid/lib:/data/app/mid/network/lib::/data/app/mid/jdk/jre/lib/sparc"/>
                        <variable id="PATH" value="/SZ_R02:/data/app/mid/lib32:/data/app/mid/lib:/data/app/mid/network/lib32:/data/app/mid/lib32:/data/app/mid/lib:/data/app/mid/network/lib::/data/app/mid/jdk/jre/lib/sparc"/>
    </environment>
    how to print to printer by specific printer name?
    thank you very much
    khun

    if submit url with parameter
    http://hostname:7778/reports/rwservlet?destype=PRINTER&desname=lpSZ_R02_2&report=sticker.out
    error
    REP-50159: Executed successfully but there were some errors when distribute the output
    How to Solution?

Maybe you are looking for