Unable to accept connection from remote member

          Hi,
          "logsIn Distributed Queue" is a distribution destiantion that have 2 members one
          named: "logsInQueue_2" and the other is: "logsInQueue", each one on a seperate
          WLS instances , "logsIn Distributed Queue" is the members templates name as well.
          We are getting this error during cluster node startup. Any ideas?
          (this secnario occurs with other distrib queues as well)
          Regards.
          Eran
          [config.xml]
          

Replied under original posting to end this thread. -Sal
          "eran" <[email protected]> wrote in message
          news:40050feb$[email protected]..
          >
          > Hi,
          >
          > "logsIn Distributed Queue" is a distribution destiantion that have 2
          members one
          > named: "logsInQueue_2" and the other is: "logsInQueue", each one on a
          seperate
          > WLS instances , "logsIn Distributed Queue" is the members templates name
          as well.
          >
          >
          > We are getting this error during cluster node startup. Any ideas?
          >
          > (this secnario occurs with other distrib queues as well)
          >
          > Regards.
          > Eran
          

Similar Messages

  • Error Message "The Remote device or resourse wont accept connection, not set up to accept connection from port https"

    I get this error message when trying to open and log into an online casino "The Remote device or resource wont accept connection, not set up to accept connection from port https".
    I am on a desktop computer my connection to the net is with a USB Virgin Mobile hotspot device.
    I also have issues with some downloads not installing right for instance SKYPE wont work. If the problems are related I don't know
    Thanks

    Starting in Firefox 14, Firefox will guess an address and place it in the address bar (AutoFill feature). If you have ever connected to the site using a secure (HTTPS) connection, then Firefox will try to connect security to the address suggested by the AutoFill feature. To work around this you can:
    * Edit the address to force Firefox to interpret your entry literally. For example, if there is a trailing / you can remove it.
    * Turn off the URL bar AutoFill feature and just use the AutoSuggest drop-down.
    * Clear Firefox's memory of the site so it doesn't default to a secure connection (however, this also removes any bookmarks you have to pages on the site).
    To disable the in-address-bar autofill without losing the suggestions that appear below the bar:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''autofill''' and pause while the list is filtered
    (3) Double-click '''browser.urlbar.autoFill''' to toggle it from true to false. You're done with about:config and you can close this tab.
    "Forget about this site" will clear cache, history, bookmarks, and permissions for the site, and probably any saved certificate. There are two ways to get to this:
    * History > Show All History, right-click an entry for the site > "Forget about this site"
    * Type or paste about:permissions in the address bar and press Enter, then select the site from the list on the left side, and click the "Forget about this site" button on the right side
    Depending on the size of your history and cache, this may lock Firefox up for a minute or two while everything is cleansed.

  • Connection from remote sites (Frame Relay WAN) to AS/400 dissapears

    Hello,
    We have the following problem appearing in our environment:
    All connections from remote sites dissapears unexpected from AS/400. After 2-3 minutes remote users get normal connectivity again.
    The environment is the the following:
    Frame Relay/ATM WAN (Frame Relay on remote sites and ATM in datacenter) comes to Cisco 7204VXR router which connected to LAN switch with 10/100/1000 ports. AS/400 with Fast Ethernet interface also connected to the similar LAN switch. CEF is enabled on the router, IOS version 12.4.3a. We have ETHSTD *ALL parameter set on AS/400. Remote users uses TCP/IP and Telnet but there are a number of 5494 controllers wich uses SNA.
    We got the problem for the first time after we enabled CEF on the router.
    I suspect that the cause of problem is Ethernet frames of different standards due to ETHSTD *ALL, but can neither reproduce the problem nor understand why it behaves so.
    Have anybody had similar problem?
    I would be very thanksfull if somebody can help me to solve it.
    Thank you in advance.
    //Mikhail Galiulin

    Hi Martin,
    Cisco 7200 itself can access AS/400 as well as all other hosts in the same with AS/400 LAN. There is no any outage in communications which goes to another LAN segment via Netscreen firewall while the communication via Cisco is down. Only those hosts which connected via Cisco are experiencing the problem. I can not say where the traceroute from AS/400 stucks (there are other people who maintain the machine and they never could catch the exact moment of outage).
    To turn off CEF I treat as the last option actually and unfortunatelly there is no guarantee that software upgrade will help (we have 12.4.3a now).
    So first of all I'm trying to understan WHY it happens because I can not see any systematics in the problem appearance. It can happen 3 times under 2 days and then dissapear for 1-2 months...
    //Mikhail Galiulin

  • Unable to initialize connection to remote target

    The device is NI PXI-1010, I can ping the device but I cannot connect it through MAX.  I am using version 4.5.  Whenever I try to set up a new remote system, it cannot find the remote device.  I have tried using both the computer name (which is resolved to an IP address in the hosts file) and the just IP address.  I get this error:  "Unable to initialize connection to remote system(s)."
    I am able to ping the remote computer and but I cannot browse to it in Windows Explorer.

    The PXI-1010 is just a chassis.  What controller are you using?  How is it configured?  What OS does it have?
    If you have a Windows controller, then you probably need to setup sharing, domains, and other network settings.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Connecting from Office and Connecting from Remote

    Hello
    Can anyone tell me what is the difference between "Connecting from Office" and "Connecting from Remote" in the connection wizard ?
    Thank you in advance

    Hi Naldoo,
    Into installation of SAP BPC you are specifying for application server 3 names:
    Application Server Name
    External Application Server Name
    Virtual Name
    The third one is used in case if you are using NLB.
    The first one is the one using by "Connecting from Office"
    The second one is used by "Connecting outside of office"
    For this reason External name must be FQDN )Fully qualify name)
    Application Server name can be short name
    I hope this will help.
    Regards
    Sorin Radulescu

  • Accepting connection from client

    Hello,
    I want to create java server which accepts connection from client once and then continuously waits for request sent by client. Something same as select() call in C
    Something of kind
    Server.java:
    Socket socket = server.accept();
    while(true)
    // listen for request ,
    // if request received , create new thread for processing
    // return response
    I don't want to accept connection again and again
    Edited by: tryit on Aug 29, 2008 11:41 PM

    Thanks for the reply.
    But even in this library, an new thread is created which keeps on doing accept() in while(true) and after accepting connection , another thread is created to do the processing.
    But i want that once the connection is established between server and client i.e once accept() is done then just using that socket rest of processing i.e read()/write() is done , no need for accept() in while(true)
    I have something like this
    SenderReciever.java
    public class SenderAndReciever
        private ServerSocket server;
        private int port = 6000;
        public SenderAndReciever()
            try
                server = new ServerSocket(port);
         catch (IOException e)
                e.printStackTrace();
        public void handleConnection()
            try
         Socket socket = server.accept();
             /* PROBLEM AREA */
             /* This while loop results in infinite loop .
              * if i move Socket socket = server.accept() inside while then it  accepts one connection
              * returns a response but then waits for another connection to be accepted
              * But i want connection once accepted , use the same socket for rest all communications
         while (true)
              new ConnectionHandler(socket);
         catch (IOException e)
              e.printStackTrace();
        public static void main(String[] args)
            SenderAndReciever senderAndReciever = new SenderAndReciever();
            senderAndReciever.handleConnection();
    }ConnectionHandler.java:
    class ConnectionHandler implements Runnable
          private Socket socket;
          public ConnectionHandler(Socket socket)
             this.socket = socket;
            Thread t = new Thread(this);
            t.start();
          public void run()
             try
                readData();
                processData();
                sendData();
             catch (Exception e)
                e.printStackTrace();
    }

  • Unable to allow traffic from remote office - Cisco RV220W

    Hi there,
    I have just bought the RV220W Cisco router firewall because my DLINK-1600 got broken and now I am unable to allow access to the machines located behind this router from the machines located at a remote office. Any help would be much appreciated!!
    This is the situation:
    1. Two remote offices A and B connected by a VPN tunnel (this connection is managed by an external provider and it is properly functioning)
    2. IP range A office: 192.168.236.0/24
    3. IP range B office: 192.168.237.0/24
    4. Office A: CISCO RV220W router/firewall (the one that I´ve just bought as the old dlink has broken). This RV220W is connected to a cisco router (managed by provider) that is the one with the VPN tunnel to the other office. The CISCO router does not do NAT. On the other end (Office B) there is another CISCO router managed by the provider.
    5. Everything was working smoothly until our old router/firewall got broken and that is when I bought the rv220w. I have set up the CISCO RV220W at office A and the machines can ping the machines located at office B and can browse the internet, i.e., the traffic going out is OK and in that sense everything works smoothly.
    6. The problem is that the machines located at office B cannot access the machines located behind the CISCO RV220W and I know it is a problem of the firewall as if I capture traffic coming from office B, I can see that it is dropped by the CISCO RV220W.
    7. I have tried to enable an access rule in the firewall to allow traffic from office B (see picture below) but it does not seem to work. In the field, Send to Local Server (DNAT IP) I have entered the WAN IP of my router (you cannot leave it blank) … this rule does not work at all. I think that is not properly configured but I don´t know how to do it.
    8. As you see, the problem is that I don´t know how to set up a rule to allow specific traffic coming from the WAN (traffic from remote office – 192.168.237.0/24) to the LAN at office A - 192.168.236.0/24.
    In the old router/firewall I just had to create a rule specifying the source interface (WAN) and network (Office B) and the destination interdace (LANOfficeA) and network (Office A). It does not seem that here I can do the same. i mean, you always have to point to a server ip inside the LAN??
    I know it has to be a very easy thing to do but at this moment I am completely stuck. If anyone can give me some advice would be great.
    Thanks a lot for your help in advanced!
    Eva

    Hi Eva, the default inbound policy cannot be changed. It will block all inbound traffic. To my knowledge there is not a way around this. Access rules are the only way to 'poke' a hole through the firewall but as you note, it is for a specific host. Values such as .0 and .255 do not work.
    -Tom
    Please mark answered for helpful posts

  • JDBC connect from remote computer fails

    Hi all,
    I have successfully installed the XE server and I can connect over JDBC from clients running locally on the machine where the XE server is installed.
    However when I try to connect from a remote computer using the same client I get an error saying: The Network Adapter could not establish the connection
    I can ping the machine with XE installed and all firewalls on the machines are turned off.
    Any ideas on the subject of JDBC remote connect to XE server? Or is it simply that it is not supported?
    Appreciate all the help I can get.
    Thanks,
    /Anders

    On my machine I have the listener bound to local interface.
    Listener.ora has hostname in it, and this is the listener status:
    As status shows the hostname is resolved to localhost, on this machine I am unable (with this configuration) to share the db to other machines (I do not have oracle client on my other pc, but telnet is unable to connect to port 1521).
    Changing hostname to ipaddres solves.
    [andrea@bones ~]$ lsnrctl status
    LSNRCTL for Linux: Version 10.2.0.1.0 - Beta on 15-DEC-2005 21:28:51
    Copyright (c) 1991, 2005, Oracle.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bones)(PORT=1521)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Beta
    Start Date                15-DEC-2005 21:28:40
    Uptime                    0 days 0 hr. 0 min. 11 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Default Service           XE
    Listener Parameter File   /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
    Listener Log File         /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=8080))(Presentation=HTTP)(Session=RAW))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
      Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "XE" has 1 instance(s).
      Instance "XE", status READY, has 1 handler(s) for this service...
    Service "XEXDB" has 1 instance(s).
      Instance "XE", status READY, has 1 handler(s) for this service...
    Service "XE_XPT" has 1 instance(s).
      Instance "XE", status READY, has 1 handler(s) for this service...
    The command completed successfully
    [andrea@bones ~]$

  • Error retrieving JDBC connection from remote client (WLS 10.0)

    Hallo,
    I get an error when I try to retrieve a JDBC connection from a WLS datasource using a remote client. My Weblogic server version is: WebLogic Server 10.0 MP1 Thu Oct 18 20:17:44 EDT 2007 1005184
    I use the following code to retrieve the JDBC connection:
    Hashtable<String,String> ctxEnv = null;
    InitialContext ctx = null;
    DataSource dataSource = null;
    Connection con = null;
    ctxEnv = new Hashtable<String,String>();
    ctxEnv.put(InitialContext.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory");
    ctxEnv.put(InitialContext.PROVIDER_URL, "t3://localhost:7001");
    ctx = new InitialContext(ctxEnv);
    dataSource = (DataSource) ctx.lookup("datasources/XXX");
    con = dataSource.getConnection();
    When I execute this code with the weblogic.jar in the classpath everything works fine. However, when I put the wlfullclient.jar in the classpath which I created using the JAR Builder Tool I get the follwoing error:
    weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception
    at weblogic.jdbc.common.internal.RmiDataSource_1001_WLStub.getConnection(Unknown Source)
    at net.schufa.enterprise.utilities.database.test.JDBCSupportTest.test_getConnection_manually(JDBCSupportTest.java:34)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    Caused by: weblogic.rjvm.PeerGoneException: ; nested exception is:
    weblogic.utils.NestedException: java.lang.NoClassDefFoundError: weblogic/diagnostics/instrumentation/InstrumentationDebug
    at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:221)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:338)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:252)
    ... 17 more
    Caused by: weblogic.utils.NestedException: java.lang.NoClassDefFoundError: weblogic/diagnostics/instrumentation/InstrumentationDebug
    at weblogic.rjvm.RJVMImpl.gotExceptionReceiving(RJVMImpl.java:938)
    at weblogic.rjvm.ConnectionManager.gotExceptionReceiving(ConnectionManager.java:1009)
    at weblogic.rjvm.MsgAbbrevJVMConnection.gotExceptionReceiving(MsgAbbrevJVMConnection.java:452)
    at weblogic.rjvm.t3.MuxableSocketT3.hasException(MuxableSocketT3.java:373)
    at weblogic.socket.SocketMuxer.deliverExceptionAndCleanup(SocketMuxer.java:755)
    at weblogic.socket.SocketMuxer.deliverHasException(SocketMuxer.java:708)
    at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:307)
    at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
    at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:21)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    Caused by: java.lang.NoClassDefFoundError: weblogic/diagnostics/instrumentation/InstrumentationDebug
    at weblogic.diagnostics.instrumentation.rtsupport.InstrumentationSupportImpl.getMonitor(InstrumentationSupportImpl.java:54)
    at weblogic.diagnostics.instrumentation.InstrumentationSupport.getMonitor(InstrumentationSupport.java:201)
    at weblogic.jdbc.rmi.SerialConnection.<clinit>(SerialConnection.java)
    at sun.misc.Unsafe.ensureClassInitialized(Native Method)
    at sun.reflect.UnsafeFieldAccessorFactory.newFieldAccessor(UnsafeFieldAccessorFactory.java:25)
    at sun.reflect.ReflectionFactory.newFieldAccessor(ReflectionFactory.java:122)
    at java.lang.reflect.Field.acquireFieldAccessor(Field.java:917)
    at java.lang.reflect.Field.getFieldAccessor(Field.java:898)
    at java.lang.reflect.Field.getLong(Field.java:527)
    at java.io.ObjectStreamClass.getDeclaredSUID(ObjectStreamClass.java:1586)
    at java.io.ObjectStreamClass.access$700(ObjectStreamClass.java:52)
    at java.io.ObjectStreamClass$2.run(ObjectStreamClass.java:408)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.io.ObjectStreamClass.<init>(ObjectStreamClass.java:400)
    at java.io.ObjectStreamClass.lookup(ObjectStreamClass.java:297)
    at java.io.ObjectStreamClass.initNonProxy(ObjectStreamClass.java:531)
    at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1552)
    at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1466)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1292)
    at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
    at weblogic.rjvm.ClassTableEntry.readExternal(ClassTableEntry.java:36)
    at java.io.ObjectInputStream.readExternalData(ObjectInputStream.java:1755)
    at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1717)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
    at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
    at weblogic.rjvm.InboundMsgAbbrev.readObject(InboundMsgAbbrev.java:65)
    at weblogic.rjvm.InboundMsgAbbrev.read(InboundMsgAbbrev.java:37)
    at weblogic.rjvm.MsgAbbrevJVMConnection.readMsgAbbrevs(MsgAbbrevJVMConnection.java:223)
    at weblogic.rjvm.MsgAbbrevInputStream.init(MsgAbbrevInputStream.java:174)
    at weblogic.rjvm.MsgAbbrevJVMConnection.dispatch(MsgAbbrevJVMConnection.java:435)
    at weblogic.rjvm.t3.MuxableSocketT3.dispatch(MuxableSocketT3.java:368)
    at weblogic.socket.AbstractMuxableSocket.dispatch(AbstractMuxableSocket.java:383)
    at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:872)
    at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:808)
    at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:283)
    ... 4 more
    Can please anyone tell me what's going on there? What really astonishes me is that the class mentioned in the stacktrace is neither present in the wlfullclient.jar nor in the weblogic.jar, but using the weblogic.jar everything works fine. Any hint would be appreciated so much ...
    Here is the log written when is created the wlfullclient.jar:
    C:\Programme\bea\weblogic10.0\server\lib>java -jar ../../../modules/com.bea.core.jarbuilder_1.0.1.0.jar
    Setting Manifest:Class-Path = schema/weblogic-container-binding.jar schema/weblogic-domain-binding.jar schema/diagnostic
    s-binding.jar schema/diagnostics-image-binding.jar schema/kodo-conf-binding.jar wlcipher.jar xmlx.jar ojdbc14.jar jconn2
    .jar jConnect.jar EccpressoAsn1.jar EccpressoCore.jar EccpressoJcae.jar mysql-connector-java-commercial-5.0.3-bin.jar w
    lbase.jar wlutil.jar wlsqlserver.jar wldb2.jar wlsybase.jar wloracle.jar wlinformix.jar wlw-langx.jar ../../common/lib/p
    dev.jar debugging.jar wlw-system.jar ../../javelin/lib/javelinx.jar jcom.jar weblogic-L10N.jar
    Setting Manifest:Implementation-Vendor = BEA Systems
    Setting Manifest:Implementation-Title = Client jar for WebLogic Server 10.0 Thu Oct 18 20:17:44 EDT 2007 1005184
    Setting Manifest:Implementation-Version = 10.0.1.0
    Creating new jar file: wlfullclient.jar
    Integrating jar -->(0)/(0)/C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Integrating jar <--(0)/(31337)/(31337)/C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Integrating jar -->(0)/(31337)/C:\Programme\bea\modules\features\weblogic.client.modules_10.0.1.0.jar
    Integrating jar <--(0)/(31337)/(0)/C:\Programme\bea\modules\features\weblogic.client.modules_10.0.1.0.jar
    Integrating jar -->(1)/(31337)/C:\Programme\bea\modules\features\weblogic.client.modules.L10N_10.0.1.0.jar
    Integrating jar <--(1)/(31337)/(0)/C:\Programme\bea\modules\features\weblogic.client.modules.L10N_10.0.1.0.jar
    Ignoring unresolved jarC:\Programme\bea\modules\features\weblogic.client.modules.ja_10.0.1.0.jar
    Ignoring unresolved jarC:\Programme\bea\modules\features\weblogic.client.modules.ko_10.0.1.0.jar
    Ignoring unresolved jarC:\Programme\bea\modules\features\weblogic.client.modules.zh.CN_10.0.1.0.jar
    Ignoring unresolved jarC:\Programme\bea\modules\features\weblogic.client.modules.zh.TW_10.0.1.0.jar
    Integrating jar -->(1)/(31337)/C:\Programme\bea\modules\com.bea.core.antlr.runtime_2.7.5.jar
    Integrating jar <--(1)/(31410)/(73)/C:\Programme\bea\modules\com.bea.core.antlr.runtime_2.7.5.jar
    Integrating jar -->(1)/(31410)/C:\Programme\bea\modules\com.bea.core.logging_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/i18n/i18n.properties also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Integrating jar <--(1)/(31487)/(77)/C:\Programme\bea\modules\com.bea.core.logging_1.0.1.0.jar
    Integrating jar -->(1)/(31487)/C:\Programme\bea\modules\com.bea.core.xml.staxb.runtime_1.0.1.0.jar
    Integrating jar <--(1)/(32047)/(560)/C:\Programme\bea\modules\com.bea.core.xml.staxb.runtime_1.0.1.0.jar
    Integrating jar -->(1)/(32047)/C:\Programme\bea\modules\com.bea.core.annogen_1.0.1.0.jar
    Integrating jar <--(1)/(32265)/(218)/C:\Programme\bea\modules\com.bea.core.annogen_1.0.1.0.jar
    Integrating jar -->(1)/(32265)/C:\Programme\bea\modules\com.bea.core.process_5.3.0.0.jar
    Integrating jar <--(1)/(32277)/(12)/C:\Programme\bea\modules\com.bea.core.process_5.3.0.0.jar
    Integrating jar -->(1)/(32277)/C:\Programme\bea\modules\com.bea.core.common.engine.impl_2.0.1.0.jar
    Integrating jar <--(1)/(32294)/(17)/C:\Programme\bea\modules\com.bea.core.common.engine.impl_2.0.1.0.jar
    Integrating jar -->(1)/(32294)/C:\Programme\bea\modules\com.bea.core.common.engine.api_2.0.1.0.jar
    Integrating jar <--(1)/(32321)/(27)/C:\Programme\bea\modules\com.bea.core.common.engine.api_2.0.1.0.jar
    Integrating jar -->(1)/(32321)/C:\Programme\bea\modules\com.bea.core.common.security.api_2.0.1.0.jar
    Integrating jar <--(1)/(32446)/(125)/C:\Programme\bea\modules\com.bea.core.common.security.api_2.0.1.0.jar
    Integrating jar -->(1)/(32446)/C:\Programme\bea\modules\com.bea.core.common.security.impl_2.0.1.0.jar
    Integrating jar <--(1)/(32895)/(449)/C:\Programme\bea\modules\com.bea.core.common.security.impl_2.0.1.0.jar
    Integrating jar -->(1)/(32895)/C:\Programme\bea\modules\com.bea.core.common.security.jdkutils_2.0.1.0.jar
    Integrating jar <--(1)/(32908)/(13)/C:\Programme\bea\modules\com.bea.core.common.security.jdkutils_2.0.1.0.jar
    Integrating jar -->(1)/(32908)/C:\Programme\bea\modules\com.bea.core.common.security.utils_2.0.1.0.jar
    Integrating jar <--(1)/(32963)/(55)/C:\Programme\bea\modules\com.bea.core.common.security.utils_2.0.1.0.jar
    Integrating jar -->(1)/(32963)/C:\Programme\bea\modules\com.bea.core.common.security.providers.utils_2.0.1.0.jar
    Ignoring Duplicate Entry com/bea/common/security/ProvidersLogger$LoggableMessageSpiImpl.class also in C:\Programme\bea\modules\com.bea.core.common.security.api_2.0.1.0.jar
    Ignoring Duplicate Entry com/bea/common/security/ProvidersLogger.class also in C:\Programme\bea\modules\com.bea.core.common.security.api_2.0.1.0.jar
    Integrating jar <--(1)/(33817)/(854)/C:\Programme\bea\modules\com.bea.core.common.security.providers.utils_2.0.1.0.jar
    Integrating jar -->(1)/(33817)/C:\Programme\bea\modules\com.bea.core.common.security.providers.env_2.0.1.0.jar
    Integrating jar <--(1)/(33901)/(84)/C:\Programme\bea\modules\com.bea.core.common.security.providers.env_2.0.1.0.jar
    Integrating jar -->(1)/(33901)/C:\Programme\bea\modules\javax.activation_1.1.jar
    Integrating jar <--(1)/(33945)/(44)/C:\Programme\bea\modules\javax.activation_1.1.jar
    Integrating jar -->(1)/(33945)/C:\Programme\bea\modules\javax.annotation_1.0.jar
    Integrating jar <--(1)/(33958)/(13)/C:\Programme\bea\modules\javax.annotation_1.0.jar
    Integrating jar -->(1)/(33958)/C:\Programme\bea\modules\javax.interceptor_1.0.jar
    Integrating jar <--(1)/(33964)/(6)/C:\Programme\bea\modules\javax.interceptor_1.0.jar
    Integrating jar -->(1)/(33964)/C:\Programme\bea\modules\javax.ejb_3.0.jar
    Integrating jar <--(1)/(34022)/(58)/C:\Programme\bea\modules\javax.ejb_3.0.jar
    Integrating jar -->(1)/(34022)/C:\Programme\bea\modules\javax.jdo_2.0.jar
    Integrating jar <--(1)/(34119)/(97)/C:\Programme\bea\modules\javax.jdo_2.0.jar
    Integrating jar -->(1)/(34119)/C:\Programme\bea\modules\javax.enterprise.deploy_1.2.jar
    Integrating jar <--(1)/(34162)/(43)/C:\Programme\bea\modules\javax.enterprise.deploy_1.2.jar
    Integrating jar -->(1)/(34162)/C:\Programme\bea\modules\javax.jms_1.1.jar
    Integrating jar <--(1)/(34221)/(59)/C:\Programme\bea\modules\javax.jms_1.1.jar
    Integrating jar -->(1)/(34221)/C:\Programme\bea\modules\javax.jsp_1.0.1.0_2-1.jar
    Integrating jar <--(1)/(34319)/(98)/C:\Programme\bea\modules\javax.jsp_1.0.1.0_2-1.jar
    Integrating jar -->(1)/(34319)/C:\Programme\bea\modules\javax.jws_2.0.jar
    Integrating jar <--(1)/(34335)/(16)/C:\Programme\bea\modules\javax.jws_2.0.jar
    Integrating jar -->(1)/(34335)/C:\Programme\bea\modules\javax.mail_1.4.0.2.jar
    Integrating jar <--(1)/(34602)/(267)/C:\Programme\bea\modules\javax.mail_1.4.0.2.jar
    Integrating jar -->(1)/(34602)/C:\Programme\bea\modules\javax.management.j2ee_1.0.jar
    Integrating jar <--(1)/(34637)/(35)/C:\Programme\bea\modules\javax.management.j2ee_1.0.jar
    Integrating jar -->(1)/(34637)/C:\Programme\bea\modules\javax.persistence_1.0.1.0_1-0.jar
    Integrating jar <--(1)/(34730)/(93)/C:\Programme\bea\modules\javax.persistence_1.0.1.0_1-0.jar
    Integrating jar -->(1)/(34730)/C:\Programme\bea\modules\javax.resource_1.5.jar
    Integrating jar <--(1)/(34799)/(69)/C:\Programme\bea\modules\javax.resource_1.5.jar
    Integrating jar -->(1)/(34799)/C:\Programme\bea\modules\javax.servlet_1.0.1.0_2-5.jar
    Integrating jar <--(1)/(34869)/(70)/C:\Programme\bea\modules\javax.servlet_1.0.1.0_2-5.jar
    Integrating jar -->(1)/(34869)/C:\Programme\bea\modules\javax.transaction_1.1.jar
    Integrating jar <--(1)/(34889)/(20)/C:\Programme\bea\modules\javax.transaction_1.1.jar
    Integrating jar -->(1)/(34889)/C:\Programme\bea\modules\javax.xml.bind_2.0.jar
    Integrating jar <--(1)/(34989)/(100)/C:\Programme\bea\modules\javax.xml.bind_2.0.jar
    Integrating jar -->(1)/(34989)/C:\Programme\bea\modules\javax.xml.soap_1.3.0.0.jar
    Integrating jar <--(1)/(35019)/(30)/C:\Programme\bea\modules\javax.xml.soap_1.3.0.0.jar
    Ignoring unresolved jarC:\Programme\bea\modules\jaxp-api.jar
    Ignoring unresolved jarC:\Programme\bea\modules\jax-qname.jar
    Ignoring unresolved jarC:\Programme\bea\modules\activation.jar
    Ignoring unresolved jarC:\Programme\bea\modules\servlet.jar
    Integrating jar -->(1)/(35019)/C:\Programme\bea\modules\javax.xml.stream_1.0.1.0_1-0.jar
    Integrating jar <--(1)/(35063)/(44)/C:\Programme\bea\modules\javax.xml.stream_1.0.1.0_1-0.jar
    Integrating jar -->(1)/(35063)/C:\Programme\bea\modules\javax.xml.ws_2.0.jar
    Integrating jar <--(1)/(35110)/(47)/C:\Programme\bea\modules\javax.xml.ws_2.0.jar
    Integrating jar -->(1)/(35110)/C:\Programme\bea\modules\javax.xml.rpc_1.1.jar
    Ignoring Duplicate Entry javax/xml/namespace/QName.class also in C:\Programme\bea\modules\javax.xml.stream_1.0.1.0_1-0.jar
    Integrating jar <--(1)/(35167)/(57)/C:\Programme\bea\modules\javax.xml.rpc_1.1.jar
    Integrating jar -->(1)/(35167)/C:\Programme\bea\modules\com.bea.core.jsafe_3.5.0.jar
    Integrating jar <--(1)/(35423)/(256)/C:\Programme\bea\modules\com.bea.core.jsafe_3.5.0.jar
    Integrating jar -->(1)/(35423)/C:\Programme\bea\modules\com.bea.core.apache_1.0.1.0.jar
    Integrating jar <--(1)/(36825)/(1402)/C:\Programme\bea\modules\com.bea.core.apache_1.0.1.0.jar
    Integrating jar -->(1)/(36825)/C:\Programme\bea\modules\com.bea.core.beangen_1.0.1.0.jar
    Integrating jar <--(1)/(36964)/(139)/C:\Programme\bea\modules\com.bea.core.beangen_1.0.1.0.jar
    Integrating jar -->(1)/(36964)/C:\Programme\bea\modules\com.bea.core.beaninfo_1.0.1.0.jar
    Integrating jar <--(1)/(36976)/(12)/C:\Programme\bea\modules\com.bea.core.beaninfo_1.0.1.0.jar
    Integrating jar -->(1)/(36976)/C:\Programme\bea\modules\com.bea.core.datasource_1.0.1.0.jar
    Ignoring Duplicate Entry utils/Schema.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Ignoring Duplicate Entry utils/dbping.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Ignoring Duplicate Entry weblogic/i18n/i18n.properties also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Ignoring Duplicate Entry weblogic/j2ee/descriptor/wl/JDBCConnectionPoolParamsBean.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Ignoring Duplicate Entry weblogic/j2ee/descriptor/wl/JDBCDataSourceBean.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Ignoring Duplicate Entry weblogic/j2ee/descriptor/wl/JDBCDataSourceParamsBean.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Ignoring Duplicate Entry weblogic/j2ee/descriptor/wl/JDBCDriverParamsBean.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Ignoring Duplicate Entry weblogic/j2ee/descriptor/wl/JDBCPropertiesBean.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Ignoring Duplicate Entry weblogic/j2ee/descriptor/wl/JDBCPropertyBean.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Ignoring Duplicate Entry weblogic/j2ee/descriptor/wl/JDBCXAParamsBean.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Integrating jar <--(1)/(37133)/(157)/C:\Programme\bea\modules\com.bea.core.datasource_1.0.1.0.jar
    Integrating jar -->(1)/(37133)/C:\Programme\bea\modules\com.bea.core.descriptor_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/descriptor/SettableBean.class also in C:\Programme\bea\modules\com.bea.core.datasource_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/descriptor/beangen/LegalChecks.class also in C:\Programme\bea\modules\com.bea.core.beangen_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/descriptor/beangen/StringHelper.class also in C:\Programme\bea\modules\com.bea.core.beangen_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/descriptor/beangen/XMLHelper.class also in C:\Programme\bea\modules\com.bea.core.beangen_1.0.1.0.jar
    Integrating jar <--(1)/(37226)/(93)/C:\Programme\bea\modules\com.bea.core.descriptor_1.0.1.0.jar
    Integrating jar -->(1)/(37226)/C:\Programme\bea\modules\com.bea.core.diagnostics.core_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/diagnostics/type/UnexpectedExceptionHandler.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Ignoring Duplicate Entry weblogic/i18n/i18n.properties also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Integrating jar <--(1)/(37264)/(38)/C:\Programme\bea\modules\com.bea.core.diagnostics.core_1.0.1.0.jar
    Integrating jar -->(1)/(37264)/C:\Programme\bea\modules\com.bea.core.i18n_1.0.1.0.jar
    Integrating jar <--(1)/(37289)/(25)/C:\Programme\bea\modules\com.bea.core.i18n_1.0.1.0.jar
    Integrating jar -->(1)/(37289)/C:\Programme\bea\modules\com.bea.core.i18n.generator_1.0.1.0.jar
    Integrating jar <--(1)/(37335)/(46)/C:\Programme\bea\modules\com.bea.core.i18n.generator_1.0.1.0.jar
    Integrating jar -->(1)/(37335)/C:\Programme\bea\modules\com.bea.core.management.core_1.0.1.0.jar
    Integrating jar <--(1)/(37343)/(8)/C:\Programme\bea\modules\com.bea.core.management.core_1.0.1.0.jar
    Integrating jar -->(1)/(37343)/C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Integrating jar <--(1)/(37389)/(46)/C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Integrating jar -->(1)/(37389)/C:\Programme\bea\modules\com.bea.core.mbean.support_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/AbstractCommoConfigurationBean$Helper.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/AbstractCommoConfigurationBean.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/AbstractCommoConfigurationBeanBinder.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/AbstractCommoConfigurationBeanImplBeanInfo.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/BaseModelMBean.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/Commo$Pair.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/Commo.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/CommoMBean.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/CommoMBeanInstance.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/CommoModelMBeanAttributeInfo.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/CommoModelMBeanConstructorInfo.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/CommoModelMBeanInfoSupport.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/CommoModelMBeanNotificationInfo.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/CommoModelMBeanOperationInfo.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/CommoOperationsException.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/DescriptorSupport$1.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/DescriptorSupport$Pair.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/DescriptorSupport$VoidValue.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/DescriptorSupport.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/DescriptorSupportBase.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/RequiredModelMBeanWrapper.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/SecurityMBeanData.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/StandardInterface.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/TypedMBeanData.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/ant/taskdefs/management/commo/antlib.xml also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/CustomMBeanImpl.j also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/DiabloCustomMBeanIntf.j also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/commo/commo.dtd also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/management/internal/mbean/SecurityReadOnlyMBean.template also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
    Integrating jar <--(1)/(37389)/(0)/C:\Programme\bea\modules\com.bea.core.mbean.support_1.0.1.0.jar
    Integrating jar -->(1)/(37389)/C:\Programme\bea\modules\com.bea.core.messaging.kernel_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/i18n/i18n.properties also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Integrating jar <--(1)/(37548)/(159)/C:\Programme\bea\modules\com.bea.core.messaging.kernel_1.0.1.0.jar
    Integrating jar -->(1)/(37548)/C:\Programme\bea\modules\com.bea.core.resourcepool_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/i18n/i18n.properties also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Integrating jar <--(1)/(37583)/(35)/C:\Programme\bea\modules\com.bea.core.resourcepool_1.0.1.0.jar
    Integrating jar -->(1)/(37583)/C:\Programme\bea\modules\com.bea.core.weblogic.rmi.client_1.0.1.0.jar
    Ignoring Duplicate Entry weblogic/rmi/extensions/server/_HeartbeatHelper_Stub.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Integrating jar <--(1)/(37612)/(29)/C:\Programme\bea\modules\com.bea.core.weblogic.rmi.client_1.0.1.0.jar
    Integrating jar -->(1)/(37612)/C:\Programme\bea\modules\com.bea.core.weblogic.security.wls_2.0.1.0.jar
    Integrating jar <--(1)/(38016)/(404)/C:\Programme\bea\modules\com.bea.core.weblogic.security.wls_2.0.1.0.jar
    Integrating jar -->(1)/(38016)/C:\Programme\bea\modules\com.bea.core.weblogic.saaj_1.0.1.0.jar
    Integrating jar <--(1)/(38217)/(201)/C:\Programme\bea\modules\com.bea.core.weblogic.saaj_1.0.1.0.jar
    Integrating jar -->(1)/(38217)/C:\Programme\bea\modules\com.bea.core.weblogic.stax_1.0.1.0.jar
    Integrating jar <--(1)/(38543)/(326)/C:\Programme\bea\modules\com.bea.core.weblogic.stax_1.0.1.0.jar
    Integrating jar -->(1)/(38543)/C:\Programme\bea\modules\com.bea.core.store_1.0.1.0.jar
    Skipping native/aix/ppc64/libwlfileio2.so
    Skipping native/aix/ppc/libwlfileio2.so
    Skipping native/hpux11/IPF32/libwlfileio2.so
    Skipping native/hpux11/IPF64/libwlfileio2.so
    Skipping native/hpux11/PA_RISC64/libwlfileio2.sl
    Skipping native/hpux11/PA_RISC/libwlfileio2.sl
    Skipping native/linux/i686/libwlfileio2.so
    Skipping native/linux/ia64/libwlfileio2.so
    Skipping native/linux/x86_64/libwlfileio2.so
    Skipping native/solaris/sparc64/libwlfileio2.so
    Skipping native/solaris/sparc/libwlfileio2.so
    Skipping native/solaris/x64/libwlfileio2.so
    Skipping native/solaris/x86/libwlfileio2.so
    Skipping native/win/32/wlfileio2.dll
    Skipping native/win/64/wlfileio2.dll
    Skipping native/win/x64/wlfileio2.dll
    Ignoring Duplicate Entry weblogic/i18n/i18n.properties also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Integrating jar <--(1)/(38695)/(152)/C:\Programme\bea\modules\com.bea.core.store_1.0.1.0.jar
    Integrating jar -->(1)/(38695)/C:\Programme\bea\modules\com.bea.core.store.gxa_1.0.1.0.jar
    Integrating jar <--(1)/(38728)/(33)/C:\Programme\bea\modules\com.bea.core.store.gxa_1.0.1.0.jar
    Integrating jar -->(1)/(38728)/C:\Programme\bea\modules\com.bea.core.transaction_2.0.1.0.jar
    Ignoring Duplicate Entry weblogic/i18n/i18n.properties also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Integrating jar <--(1)/(38943)/(215)/C:\Programme\bea\modules\com.bea.core.transaction_2.0.1.0.jar
    Integrating jar -->(1)/(38943)/C:\Programme\bea\modules\com.bea.core.utils.full_1.0.1.0.jar
    Skipping native/aix/ppc64/libterminalio.so
    Skipping native/aix/ppc/libterminalio.so
    Skipping native/hpux11/IPF32/libterminalio.so
    Skipping native/hpux11/IPF64/libterminalio.so
    Skipping native/hpux11/PA_RISC64/libterminalio.sl
    Skipping native/hpux11/PA_RISC/libterminalio.sl
    Skipping native/linux/i686/libterminalio.so
    Skipping native/linux/ia64/libterminalio.so
    Skipping native/linux/s3990/libterminalio.so
    Skipping native/linux/x86_64/libterminalio.so
    Skipping native/macosx/pps/libterminalio.jnilib
    Skipping native/solaris/sparc64/libterminalio.so
    Skipping native/solaris/sparc/libterminalio.so
    Skipping native/solaris/x64/libterminalio.so
    Skipping native/solaris/x86/libterminalio.so
    Skipping native/win/32/terminalio.dll
    Skipping native/win/64/terminalio.dll
    Skipping native/win/x64/terminalio.dll
    Ignoring Duplicate Entry weblogic/utils/StackTraceUtilsClient.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Integrating jar <--(1)/(39367)/(424)/C:\Programme\bea\modules\com.bea.core.utils.full_1.0.1.0.jar
    Integrating jar -->(1)/(39367)/C:\Programme\bea\modules\com.bea.core.utils.classloaders_1.0.1.0.jar
    Integrating jar <--(1)/(39415)/(48)/C:\Programme\bea\modules\com.bea.core.utils.classloaders_1.0.1.0.jar
    Integrating jar -->(1)/(39415)/C:\Programme\bea\modules\com.bea.core.utils.expressions_1.0.1.0.jar
    Integrating jar <--(1)/(39429)/(14)/C:\Programme\bea\modules\com.bea.core.utils.expressions_1.0.1.0.jar
    Integrating jar -->(1)/(39429)/C:\Programme\bea\modules\com.bea.core.utils.wrapper_1.0.1.0.jar
    Integrating jar <--(1)/(39550)/(121)/C:\Programme\bea\modules\com.bea.core.utils.wrapper_1.0.1.0.jar
    Integrating jar -->(1)/(39550)/C:\Programme\bea\modules\com.bea.core.timers_1.0.1.0.jar
    Ignoring Duplicate Entry commonj/timers/CancelTimerListener.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Ignoring Duplicate Entry commonj/timers/StopTimerListener.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Ignoring Duplicate Entry commonj/timers/Timer.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Ignoring Duplicate Entry commonj/timers/TimerListener.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Ignoring Duplicate Entry commonj/timers/TimerManager.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Integrating jar <--(1)/(39581)/(31)/C:\Programme\bea\modules\com.bea.core.timers_1.0.1.0.jar
    Integrating jar -->(1)/(39581)/C:\Programme\bea\modules\com.bea.core.weblogic.workmanager_1.0.1.0.jar
    Ignoring Duplicate Entry commonj/work/RemoteWorkItem.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Ignoring Duplicate Entry commonj/work/Work.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Ignoring Duplicate Entry commonj/work/WorkCompletedException.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Ignoring Duplicate Entry commonj/work/WorkEvent.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
    Ignoring Duplicate Entry commonj/work/WorkExcep

    Dirk Ludwig wrote:
    Joe Weinstein wrote:[...]
    Hi. You should open an official support case,
    but it may be that we do not support
    external client JDBC with the client jar.Actually, I misspoke. I think we do supply a client
    jar, and that may be true
    what I said, but I see you're making your own. Can
    you find out what jar you're
    loading the InstrumentationSupport class from? That's
    the original location of
    the error, and that class doesn't exist in 10.0.Hi Joe, thanks for your reply.
    First of all, let me clarify what we did and why we did it: We have a stand-alone client application that needs to communicate with a Weblogic server using the t3 protocol (we don't want IIOP or HTTP tunneling). According to the official BEA documentation (see http://e-docs.bea.com/wls/docs100/client/basics.html and http://e-docs.bea.com/wls/docs100/client/t3.html) we needed to create the wlfullclient.jar file. We did this using the Weblogic JAR Builder Tool (see http://e-docs.bea.com/wls/docs100/client/jarbuilder.html). Unfortunatley we discovered the problem mentioned in my original post when we tried to run the client with that wlfullclient.jar.
    Regarding your classloading question: The InstrumentationSupportImpl class is located in the wlfullclient.jar, so it does exist in WLS 10.0 (it is also contained in the weblogic.jar). Unfortunately this JAR does not contain the required class "weblogic.diagnostics.instrumentation.InstrumentationDebug". I searched for this class and found it in the OSGI module "com.bea.core.diagnostics.instrumentor_1.0.1.0.jar" shipped with the Weblogic server. Obviously the JAR Builder Tool did not include the contents of this OSGI bundle into the wlfullclient.jar. I tried to include this OSGI bundle into the classpath of the client app manually (just for testing purposes), but this onyl resultet in another NoClassDefFoundError. This time the class "com.bea.objectweb.asm.Constants" could not be found.
    What astonishes me is the fact that the connection retrieval works fine when we only have the weblogic.jar in the client applications classpath, but fails when we have the wlfullclient.jar in the classpaht. It seems that the t3 communication is handled completely different, depending on what JARs I have in the classpath. Also, JMS communication works fine in both cases (i.e. for the weblogic.jar and the wlfullclient.jar). The only thing that causes problems (at least as far as we have discovered) is getting a JDBC connection from a datasource. I simply fail to see why this is the case.
    Best regards,
    DirkInteresting. I hope the official support case solves your problem.
    I would like to dig further, but it's too far afield for me with
    the workload I have at the moment.
    Joe

  • Connecting from remote machine

    This topic seems to have been talked about alot, but I've got another variation of the problem. I get the following error when I try to connect from a client machine to my IFS server:
    oracle.ifs.common.IfsException: IFS-10110: Unable to construct directory service
    oracle.ifs.common.IfsException: IFS-10140: Unable to instantiate credential manager Ifs
    oracle.ifs.common.IfsException: IFS-10150: Unable to construct credential manager (oracle.ifs.server.IfsCredentialManager)
    oracle.ifs.common.IfsException: IFS-10176: Unable to get credential manager version
    java.sql.SQLException: ORA-06550: line 1, column 13:
    PLS-00201: identifier 'IFSSYS$CM.IFSCREDENTIALMANAGERPACKAGE' must be declared
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    PLS-00201: identifier 'IFSSYS$CM.IFSCREDENTIALMANAGERPACKAGE' must be declared
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
    My question is that I see the code is trying to access IFSSYS$CM. ...PACKAGE. When my IFS was set up, I used IFSTEST instead of IFSSYS, so in my IFS database the package does exist as IFSTEST$CM.... My first thought was that my IfsDefault (the service I'm trying to use) had the wrong user in it, but it does have User: IFSTEST.
    Any suggestions?
    Charlie

    Yeah, that would be a CLASSPATH issue. You've got the wrong version of the JDBC classes (classes12.zip). Make sure you're pointing to the one in $ORACLE_HOME/jdbc/lib -- and if you are, then copy the "one that works" from the iFS server machine to your client machine. That is, if iFS is even working on that machine. The missing library (when using classes111.zip) is very disturbing. I don't know why you're having such trouble with the JDBC library. Make sure you've got ORACLE_HOME/lib in your LD_LIBRARY_PATH.
    Now, please note that you cannot mix JDBC versions. That is, if you compile with JDK 1.1.8, you better be using classes111.zip when compiling and when running. With JDK 1.2, use classes12.zip.
    Also, your configuration is a little "weird". Really, you've got two server machines, both of which are essentially database AND iFS servers. On the "client" machine, you're just using Net8 software to talk to the other database, even though you've got the whole database installed. You may as well just install the Oracle 8i Client there. That's all you need.
    Secondly, iFS doesn't really have the notion of a "client", at least not the way you're working with it. If you copy the iFS jars and the service properties file (IfsDefault.properties) and run an iFS application on your "client", you're really running an full iFS server (I guess you could think of it as a "fat client" if you're familiar with that terminology). Currently, the way we have designed iFS is to have protocol servers provide the link between clients and the iFS server. That is, you could run a web browser (on a true client machine) and access the iFS server. Or you could map a network drive to the iFS server.
    Anyway, feel free to ask more questions.

  • Accepting connection from multiple client

    Hi, i try to open a port on the server and allows others client to connect to this port and sent in data. It works well when it's 1 server to 1 client relationship. But when i turn on 1 server to many client connection where all the client will connect at the same time... none of the client data were capture in the server. Here is my code :
    Server code:
    static class Listener extends Thread
              public void run()
                   ServerSocket svrSocket;
                   Socket soc;
                   try
                        svrSocket = new ServerSocket(20);
                        System.out.println("---------------------------------------");
                        soc = svrSocket.accept();
                        System.out.println("---------------------------------------");
                        BufferedReader in = new BufferedReader(new InputStreamReader(soc.getInputStream()));
                        String strTest;
                        while((strTest = in.readLine()) != null)
                             System.out.println("SEE THIS !!!!!!!!!!!!! " + strTest);
                   catch(Exception e)
                        e.printStackTrace();
    Client code:
    socClient = new Socket("10.1.8.101", 4444);
    outPrintWriter = new PrintWriter(socClient.getOutputStream(), true);
    outPrintWriter.println(strWrite);
    Can anyone help me??? IT"S URGENT....
    THANKS

    Your code will only handle one connection at a time currently. To handle more connections it needs to be reorganized, see below. Also, you may be having a problem with binding port 20 in your server and trying to connect to port 4444 in your client. These ports obviously have to be the same or its never going to work at all! :-)
    Without getting into thread pools and stuff, this is a sample of how you might want to organize your server.
    import java.net.*;
    import java.io.*;
    import java.util.*;
    public class SocServ implements Runnable {
        // running flag set to false to stop server.
        public static boolean isRunning=true;
        // set of servicing threads, if needed.
        private static Set servicers = new HashSet();
        public void run() {
            ServerSocket svrSocket;
            Socket soc;
            Thread t;
            // open the server socket, error if port is in use, etc.
         try {
                svrSocket = new ServerSocket(4096);
                // accept connections, and start new SocServicer threads.
                while (SocServ.isRunning) {
                    soc = svrSocket.accept();
                    t = new Thread(new SocServicer(soc));
              SocServ.servicers.add(t);
                    t.start();
                // server finished, close socket
                svrSocket.close();
            } catch (IOException e) { e.printStackTrace(); }
    import java.net.*;
    public class SocServicer implements Runnable {
         // socket connection being serviced...
         Socket s;
         public SocServicer(Socket soc) { s=soc; }
         public void run() {
              if (s==null) { return; } // for sanity
              * Do all the interaction with each socket here.
    }The idea is to run one thread that listens for connections and then spawn new threads to process each connection. This way one connection does not have to wait for the previous one to finish. For a serious application you will probably want to do some more careful management of the SocServicer threads [because each thread eats up memory & resources].

  • Unable to delete rows from remote db table

    Hi
    I am relatively new to SQL Server and this issue is strange to me.
    In my vb.net code I am opening a connection to local MS Access DB using oledb provider and then am executing below query to remote SQL Server via DBCommand.ExecuteNonQuery();
    DELETE tblStaff.* FROM Staff INNER JOIN [ODBC;Driver=SQL Server;SERVER=<remote ip>;DATABASE=dddddddd;UID=uuuuuuuu;PWD=ppppppppp].tblStaff ON Staff.[Staff ID] = tblStaff.[StaffID] WHERE Staff.[Contact Status] <> "Current"
    This however created below error in the code;
    System.AccessViolationException was unhandled
    Message=Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
    Source=System.Data
    StackTrace:
    at System.Data.Common.UnsafeNativeMethods.ICommandText.Execute(IntPtr pUnkOuter, Guid& riid, tagDBPARAMS pDBParams, IntPtr& pcRowsAffected, Object& ppRowset)
    at System.Data.OleDb.OleDbCommand.ExecuteCommandTextForSingleResult(tagDBPARAMS dbParams, Object& executeResult)
    at System.Data.OleDb.OleDbCommand.ExecuteCommandText(Object& executeResult)
    at System.Data.OleDb.OleDbCommand.ExecuteCommand(CommandBehavior behavior, Object& executeResult)
    at System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method)
    at System.Data.OleDb.OleDbCommand.ExecuteNonQuery()
    During testing I noticed that if I create the relevant table tblStaff in another database on the same remote SQL Server then it works fine, so it appeared to me there is some issue with the original backend db or the table.
    The relevant table tblStaff is related to several tables in the database. I assumed that relations may be an issue so I set the relations to cascade delete even though none of the tables contains any data at this point. This did not work. I then went into
    database diagram, added all the tables and then deleted all relations of the tblStaff table. This did not work either. I then used 'Script Table as..->CREATE to' to script the tblStaff in Management Studio, deleted original tblStaff and ran the create script
    above to recreate the tblStaff table. This worked.
    What is the problem here and why doesn't the table accept delete query in its original form? I appreciate it’s the .net code that creates the error but as the error seems to be related to the backend SQL Server db therefore I have posted it here in case
    someone can help with this.
    Thanks
    Regards

    Sorry I still do not get it. when you say "Its a legacy app", are you talking about the VB.NET app ?
    If so then I repeat my self :-) Why not to connecting to the SQL server directly?
    * even if you need information from several databases (for example ACCESS + SQL Server), in most cases, it is much better to connect directly and get each information to the app. Then in your app you can combine the information and analyse it
    [Personal Site] [Blog] [Facebook]
    Access app is the legacy app. 

  • ITunes blocks connection from remote devices when menus are being used

    when any menu from the top menu bar is active (dropped down so you can see its contents), itunes refuses remote connections (iPod/iPhone) preventing you from starting stopping or otherwise controlling the remote computer. If the remote has not established a connection then it will be unable to, if it has an existing active connection then all commands will be queued until the menu is deactivated and at that time the computer goes crazy
    Expected behavior is such that the remote controlling the device would be able to connect and communicate with the computer regardless of if a menu is dropped down.

    anyone?

  • Connecting from remote  as sysdba

    Hi,
    in 8.1.7.4 on Win 2003 machines
    from a remote machine I have problem to connect as sysdba :
    SQL> connect sys/***@mydb as sysdba
    ERROR:
    ORA-01017: invalid username/password; logon denied
    SQL> connect system/***@mydb as sysdba
    ERROR:
    ORA-01031: insufficient privileges
    SQL> connect user1/***@mydb
    Connected.
    What should be set in order to be able to connect as sysdba.
    Thank for help.

    Time and again and again this question is being asked
    do a search in the forum you will hundreds of answers
    anyway since you are in windows just make sure that
    Do you have a Password file?
    set remote_login_passwordfile=EXCLUSIVE
    SQL> connect sys/***@mydb as sysdba
    ERROR:
    ORA-01017: invalid username/password; logon denied
    You have entered a wrong password
    enter the right password
    SQL> connect system/***@mydb as sysdba
    ERROR:
    ORA-01031: insufficient privileges
    you cannot system as sysdba with granting sysdba to system
    SQL> connect user1/***@mydb
    Connected.

  • Oracle connection from remote server where oracle client is installed not happening.

    Hi  ,
    I am facing problem today , that i am not able to reach oracle DB from other machine where i have installed Oracle clinet few months ago. Same was heppeing till yesterday.
    OS: Windows
    Version: 11G
    Oracle DB TNS:
    # tnsnames.ora Network Configuration File: C:\app\oracluadmin\product\11.2.0\dbhome_1\NETWORK\ADMIN\tnsnames.ora
    # Generated by Oracle configuration tools.
    DFCCDB =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = 10.199.4.130)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = dfccdb.dfcc.co.in)
    ORACLR_CONNECTION_DATA =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
        (CONNECT_DATA =
          (SID = CLRExtProc)
    Output from DB server:
    C:\Users\oracluadmin>tnsping DFCCDB
    TNS Ping Utility for 64-bit Windows: Version 11.2.0.3.0 - Production on 28-JAN-2014 14:51:22
    Copyright (c) 1997, 2011, Oracle.  All rights reserved.
    Used parameter files:
    C:\app\oracluadmin\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 10.199.4.130)(PORT = 1521))) (CONNECT_DATA = (SERVER
    = DEDICATED) (SERVICE_NAME = dfccdb.dfcc.co.in)))
    OK (0 msec)
    C:\Users\oracluadmin>sqlplus SYS AS SYSDBA@DFCCDB
    SQL*Plus: Release 11.2.0.3.0 Production on Tue Jan 28 14:56:15 2014
    Copyright (c) 1982, 2011, Oracle.  All rights reserved.
    Enter password:
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL>
    Clinet server TNS:
    DFCCDB =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = 10.199.4.130)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = dfccdb.dfcc.co.in)
    Output from client server:
    C:\Users\gisadmin>tnsping DFCCDB
    TNS Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on 28-JAN
    014 15:06:18
    Copyright (c) 1997, 2010, Oracle.  All rights reserved.
    Used parameter files:
    C:\app\gisadmin\product\11.2.0\client_1\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TC
    (HOST = 10.199.4.130)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = dfccdb.df
    .co.in)))
    OK (10 msec)
    C:\Users\gisadmin>sqlplus SYS AS SYSDBA@DFCCDB
    SQL*Plus: Release 11.2.0.1.0 Production on Tue Jan 28 15:06:36 2014
    Copyright (c) 1982, 2010, Oracle.  All rights reserved.
    Enter password:
    ERROR:
    ORA-12560: TNS:protocol adapter error
    Enter user-name:
    Thnaks....

    Hi,
    Refer the logs:
    <msg time='2014-02-11T10:43:10.455+05:30' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='DFCC-GISDB-01'
    host_addr='10.199.4.58'>
    <txt>11-FEB-2014 10:43:10 * (CONNECT_DATA=(SERVICE_NAME=dfccdb.dfcc.co.in)(CID=(PROGRAM=C:\app\gisadmin\product\11.2.0\client_1\bin\sqlplus.exe)(HOST=DFCC-GISAPP-01)(USER=gisadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.199.4.55)(PORT=25229)) * establish * dfccdb.dfcc.co.in * 12514
    </txt>
    </msg>
    <msg time='2014-02-11T10:43:10.455+05:30' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='DFCC-GISDB-01'
    host_addr='10.199.4.58'>
    <txt>TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
    </txt>
    </msg>
    <msg time='2014-02-11T10:43:58.706+05:30' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='DFCC-GISDB-01'
    host_addr='10.199.4.58'>
    <txt>11-FEB-2014 10:43:58 * (CONNECT_DATA=(SERVICE_NAME=dfccdb.dfcc.co.in)(CID=(PROGRAM=C:\app\gisadmin\product\11.2.0\client_1\bin\sqlplus.exe)(HOST=DFCC-GISAPP-01)(USER=gisadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.199.4.55)(PORT=25230)) * establish * dfccdb.dfcc.co.in * 12514
    </txt>
    </msg>
    <msg time='2014-02-11T10:43:58.722+05:30' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='DFCC-GISDB-01'
    host_addr='10.199.4.58'>
    <txt>TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
    </txt>
    </msg>
    <msg time='2014-02-11T10:44:33.120+05:30' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='DFCC-GISDB-01'
    host_addr='10.199.4.58'>
    <txt>11-FEB-2014 10:44:33 * (CONNECT_DATA=(SERVICE_NAME=dfccdb.dfcc.co.in)(CID=(PROGRAM=C:\app\gisadmin\product\11.2.0\client_1\bin\sqlplus.exe)(HOST=DFCC-GISAPP-01)(USER=gisadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.199.4.55)(PORT=25231)) * establish * dfccdb.dfcc.co.in * 12514
    </txt>
    </msg>
    <msg time='2014-02-11T10:44:33.136+05:30' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='DFCC-GISDB-01'
    host_addr='10.199.4.58'>
    <txt>TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
    </txt>
    </msg>
    <msg time='2014-02-11T10:45:24.662+05:30' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='DFCC-GISDB-01'
    host_addr='10.199.4.58'>
    <txt>11-FEB-2014 10:45:24 * (CONNECT_DATA=(SERVICE_NAME=dfccdb.dfcc.co.in)(CID=(PROGRAM=C:\app\gisadmin\product\11.2.0\client_1\bin\sqlplus.exe)(HOST=DFCC-GISAPP-01)(USER=gisadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.199.4.55)(PORT=25280)) * establish * dfccdb.dfcc.co.in * 12514
    </txt>
    </msg>
    <msg time='2014-02-11T10:45:24.662+05:30' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='DFCC-GISDB-01'
    host_addr='10.199.4.58'>
    <txt>TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
    </txt>
    </msg>
    <msg time='2014-02-11T10:48:00.819+05:30' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='DFCC-GISDB-01'
    host_addr='10.199.4.58'>
    <txt>11-FEB-2014 10:48:00 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=oracluadmin))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186647296)) * status * 0
    </txt>
    </msg>
    <msg time='2014-02-11T10:48:14.547+05:30' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='DFCC-GISDB-01'
    host_addr='10.199.4.58'>
    txt>11-FEB-2014 10:48:14 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=oracluadmin))(COMMAND=services)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186647296)) * services * 0
    </txt>
    </msg>

Maybe you are looking for

  • What happens on Document.Close() in DI

    Hi! It's not documented which fields in the order that are changed when performing the Document.Close() operation. The DocStatus will be set to 'C', that we all know. Are there any more fields that are changed? Does the Close affect other tables/obje

  • Importing from one account to another on the same computer

    How do you import video from one windows XP account to another on itunes? My account is the primary and I can import from my wife's account into mine but she cannot import from mine to hers? How do I fix this?

  • Does anyone from Nokia ever respond to these quest...

    Why are there never any responses to the Ovi - PC Suite issue. Even a negative response to let us know where we stand. And why have we not got map voice routing yet?? Incredible arrogance being shown to customers

  • [iPhone] Can't play multiple compressed sounds, seems to block!

    I'm writing an app that needs to play a variety of audio samples of different lengths back to back, but only one at a time. The system I came up with works great when using WAV files or whenever running on the simulator no matter what audio type, but

  • Qone8

    Hello Lenovo people. I have a Thinkpad Edge E330. Recently my browser changed my homepage to Qone8.com Now i know that it is a browser hijacker and i have delt with some of them before, but this one is a bit difrent. Every time i remove it completly