Unable to access external drive connected to Mac Pro running Mountain Lion
When I initially connect, it is accessable and I am able to back up to it. But after a few weeks, it no longer allows changes. It is still mounted, and I can see the directories on it, but can no longer write to it. I was told by the folks at G-drive that this is a known problem with Mountain Lion. I really need my drive to stay available....I notice that there is an update to 10.8.4, but before taking my FM Pro Server offline, I'd like to know if the update will fix the problem.
Thanks.
I don't know if it's the same problem, but in the last few weeks we have had that happen on two machines running Snow Leopard and one running Lion 10.7.5. In our case, it always involves Time Machine, and the FW external FW drive becomes read-only for no apparent reason and despite the fact that Command+I reveals the user "can read and write" to the drive. Running Apple's disk utility to Repair Disk a few times usually fixes it.
It's just infuriating. Ever since Leopard came out with Time Machine I had had that intrusive, obnoxious utility permanently disabled. I enabled it in Lion, and I've disabled it again.
Similar Messages
-
My brand new Mac Pro running Mountain Lion crashes when installing updates or new software.
My brand new Mac Pro running Mountain Lion crashes and re-boots when installing updates or new software. I can only perform these operations while in the safe boot mode. I have reloaded OSX twice. Does not solve the problem. The machine is brand new. It replaced a previous MacPro that would not support the new Mountain Lion. When my new machine came in. I swaped the dirve out of my old unit into the new and ran the new Lion update. The machine has had this aforementioned problem since that time. Also, I had the Legacy version of File Vault running on the old machine/drive, which I also turned off(thinking that was the problem) but that did not fix the problem either.
Here is my panic log entry:
Sun Nov 18 22:08:42 2012
panic(cpu 6 caller 0xffffff800b4ac90b): Releasing non-exclusive RW lock without a reader refcount!
Backtrace (CPU 6), Frame : Return Address
0xffffff8556cab950 : 0xffffff800b41d626
0xffffff8556cab9c0 : 0xffffff800b4ac90b
0xffffff8556cab9e0 : 0xffffff800b51c09c
0xffffff8556cabc10 : 0xffffff800b510e92
0xffffff8556cabc40 : 0xffffff800b4ff375
0xffffff8556cabf50 : 0xffffff800b7e182a
0xffffff8556cabfb0 : 0xffffff800b4ced33
BSD process name corresponding to current thread: installd
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x000000000b200000
Kernel text base: 0xffffff800b400000
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 427147359117
last loaded kext at 111975561856: com.apple.filesystems.smbfs 1.8 (addr 0xffffff7f8ba85000, size 229376)
last unloaded kext at 127467947009: com.apple.driver.AppleIntel8254XEthernet 3.1.1b1 (addr 0xffffff7f8bf8d000, size 69632)
loaded kexts:
com.zeobit.kext.Firewall 2.3.1
com.apple.filesystems.smbfs 1.8
com.apple.driver.AppleIntelProfile 97
com.apple.driver.AppleBluetoothMultitouch 75.15
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.kext.AMDFramebuffer 8.0.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleHDA 2.3.1f2
com.apple.AMDRadeonAccelerator 1.0.0
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.driver.AppleUSBHub 5.2.5
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.Intel82574L 2.3.0b4
com.apple.BootCache 34
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleUSBUHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.AppleProfileTimestampAction 97
com.apple.driver.AppleProfileThreadInfoAction 97
com.apple.driver.AppleProfileRegisterStateAction 97
com.apple.driver.AppleProfileReadCounterAction 97
com.apple.driver.AppleProfileKEventAction 97
com.apple.driver.AppleProfileCallstackAction 97
com.apple.iokit.AppleProfileFamily 97
com.apple.driver.IOBluetoothHIDDriver 4.0.9f33
com.apple.driver.AppleMultitouchDriver 235.28
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.AppleUSBAudio 2.9.0f6
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOAcceleratorFamily 19.0.26
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.kext.AMD5000Controller 8.0.0
com.apple.kext.AMDSupport 8.0.0
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleUSBHIDKeyboard 165.5
com.apple.driver.AppleHIDKeyboard 165.5
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0 -
Whenever i connect the hdmi cable to the tv and the power cord simultaneously on my MacBook Pro running Mountain Lion, the laptop overheats, i noticed in the activity monitor that Loginwindow was taking up to 80% of the cpu, any solutions?
Mac OS X: What is Safe Boot, Safe Mode?
Mac OS X: Starting up in Safe Mode
I have tried installing a disc to try and reinstall the operating system.
Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
If you did manage to reach the desktop after doing any of the above
my battery was dying after a few minutes so I was trying to kill the battery and recharge it to see if I couldn't get it back to a full charge.
Apple/About This Mac/More Info/Hardware/Power/Battery Information - copy and paste the information here. Do not include any serial numbers.
I noticed the computer running slow
How large is your hard drive and how much hard drive space do you have left?
Mac OS X (10.4.3)
Update to 10.4.11 using the combo update or Software Update along with all the other updates that goes along with it. -
I have created three new users without Apple IDs and they can't log into either of my Macbook Pro or Mac Mini running Mountain Lion. These accounts are for my kids and originally were setup with parental controls and time constraints. Thinking this was the problem I removed the time constraints, removed the parental controls, deleted and re-added them, and made them standard users. I have reinstalled, used disk utility to repair permissions, and made them admins. Any help is appreciated.
Users don't need Apple ID's. That's not the issue. Have you tried repairing permissions their accounts?
http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/
Repairing User Permissions in OS X Lion
You’ll need to reboot to perform this, and then use the same resetpassword utility that is used to change passwords in Lion, but instead choosing a hidden option.
When you use the Disk Utility app and Repair Permissions — it doesn’t actually repair the permission settings on folders and files in your Home folder where your documents and personal applications reside.
In Lion, there is an additional Repair Permissions application utility hidden away. This tool is located inside boot Repair Utilities. Here’s how to access it.
Restart Lion and hold down the Command and R keys. You will boot into the Repair Utilities screen. On top, in the Menu Bar click the Utilities item then select Terminal.
In the Terminal window, type resetpassword and hit Return.
The Password reset utility launches, but you’re not going to reset the password. Instead, click on the icon for your Mac’s hard drive at the top. From the drop-down below it, select the user account where you are having issues.
At the bottom of the window, you’ll see an area labeled ‘Reset Home Directory Permissions and ACLs’. Click the Reset button there.
The reset process takes a couple of minutes. When it’s done, quit the programs you’ve opened and restart your Mac. Notice that ‘Spotlight’ starts re-indexing immediately. -
Acrobat 9 fails to recognize (scanner) Epson Artisan 730 after Mac Pro and Mountain Lion Upgrade
I had no problems scanning from the Epson Artisan 730 all in one until I upgraded my Powermac G5 to a mid-2010 Mac Pro with Mountain Lion 10.8. The printer is installed with most recent drivers from Epson (the install disk will not work on 10.8 anyway). I can scan directly from the Print and Scan system preference under the scan tab of the printer and it prints fine from Acrobat. When I go to Document -> Scan to PDF, it brings up a dialog box in which the first input is box is Scanner: "Please select a device" with up and down arrows on the right. When I click on the up and down arrows, there are no selection options other that "Please select a device" with a check mark next to it. This printer is wireless, as is another Canon which also has a scanner and neither appear as available. Very frustrating. I have repeated the instalation process (for the Epson downloaded driver utilities) and it just is not seen.
If anyone has any workarounds or solutions, I would be grateful.1strail wrote:
Of course now I have a red badge on the App Store that is asking me to update the Epson driver. I wonder if that will blow out the TWAIN driver. It's epson14333.dmg.
No. Your TWAIN drivers are separate than the Image Capture Device drivers that would be installed by the printer driver update.
Also, no way of getting rid of the badge notification in system preferences. App store is not listed.
There is no law that you must update software just because it is available. There is no way to get rid of the red badge, but you don't have to do the upgrade. -
Can I share my cd/DVD drive wirelessly on my iMac running Mountain Lion with my Apple TV running iOS 6 latest version?
it feels like something in the upper right hand corner is blocking the entry.
Appears your optical drive is "broke" = hardware issue.
For DIY instructions check out the following:
iFixit
YouTube’s “How To” tutorials.
AS are not the only places that fixes Macs.
International AASP’s & Other Services
AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP) -
recently purchased a new Mac Pro w/ mountain lion 10.8 and I am using my Apple 30 inch monitor. When watching video or browsing certain websites, my monitor will flicker grey and sometimes lock up. I am a video producer so this is quite frustrating...I figure it is the grphic card or I am missn a plugin or driver update? help!
Maybe this will help:
http://support.apple.com/kb/HT1573
PRAM reset: http://support.apple.com/kb/PH11243
SMC reset: http://support.apple.com/kb/HT3964 -
I hace a Macbook Pro running Mountain Lion OS.... I need to print from time to time but don't have a new printer to go with my new macbook. Would a 3115CN work with it or no? If so, how can I set it up? Setting up a printer on a mac is a bit different from doing so on a windows machine and I am new to the macworld.
All help would be greatly appreciated.Yes. I'm running this printer from 10.6 through 10.9 and it's worked fine with all versions. Dell released updated drivers a while ago that make it much easier to administer this printer.
-
One of the users on my Mac book pro running mountain lion finds that no changes made in last session are there next time they log on.
For instance, the Macintosh HD icon, is always moved so that it is almost off the screen to top left hand side of the desktop.
None of my changes to the sidebar in the finder are there.
My changes to the dock have reverted.
Despite unticking the box when logging out, even though i have quit all applications, iphoto and safari are always re-opened.
iphoto always says the library needs to be upgraded... even though i did that the last time.
I have tried deleting ALL the files in the "Saved application state" folder in the library folder, but that doesn't seem to make any difference.
This is on a second admin user account.
The main user account seems to be fine.
This account used to be in the filevault on Lion, but is not now in Mountain Lion.
Can anyone help?
ThanksThe same tragic thing happened to me, not even a full two days after I bought it. I immediately powered it off, wiped it as best I could, and put it in front of a fan. I tried valiantly to get the back off, but couldn't remove all the screws. I was basically inconsolable until I realized that no matter what, my credit card insurance would cover it, since it had been less than 90 days. Fast forward 48 hours, and it seemed to run just fine. Some of the keys and the track pad were sticky, and I figured since it was covered, I might as well get it fixed. My only concern at this point was had I voided the Apple Care. I brought it in, told them what happened, said what I needed to satisfy the credit card, and they said, "We'll just swap it out for you, no problem." I was thrilled, and the Genius said they appreciated my honesty, and it was easier for all parties to just do it this way. And my Apple Care was transferred to the new machine. This was my first Mac and, needless to say, I am now an Apple devotee.
-
Hi! is it possible that Logic X has upgrades that work only with mavericks and does t work in mountain lion....since in my macbook pro with mavericks i have new views of the equalizer, etc and in my mac pro with mountain lion it still the old view...
Any OS version of 10.8.4 or later has all features that are not OS depended. The plugins are one example. You probably haven't updated all versions of Logic Pro X to the latest one.
-
Why does IPhoto create dupicates of photos and graphic that is on My Mac when I import the photos from Photo stream to the library? I started out with about 4,000 photos when I transferred everything from my PC. I use a new IPad and IPhone to take the photos. The Mac is running Mountain Lion 10.8.2 3.1 Intel prosessor. I am using IPhoto 11.
Thanks in advance
Barrythere is an app called daisydisk on mac app store which will help you see exactly where the memory is focused and consumed try using that app and see which folders are using more memory
-
Downgrading New Mac pro to Mountain Lion
Is it possible to downgrade a New Mac Pro to Mountain Lion?
Apple has removed the Open Transport API from Mavericks and we need it to run a specific medical program.
The software runs on our old Macs. Just wondering if its ok to do this on the new Mac Pro.Thanks for the thoughts people.
I didn't think it could be possible.
We have a solution - albeit a messy one.
The software component that is incompatible is a DICOM server (medical image server). The actual viewing software used to manipulate the image is compatible - just the image import component is not.
Putting it simply we will set up some folder aliases over the network so the viewing software will just use the image folders on the old Mac as their repository.
We have also contacted the developers to get them to update their software! As technically, it is not compatible with Mac... -
My dictation on my macbook pro running mountain lion has stopped working on both my macs. Microphone works for all other apps WUZ UP
What happens when you try to dictate?
-
I can't download movies. I'm taking a cinema class where I am required to watch movies. My professor provides the link on an electronic blackboard for the movies. I can't access the link on my mac pro notebook. Is there an app or software download that can help with this? I can access the link fine on a pc.
The "right click" is a function of the OS and those keyboard commands do not work on the iPad at all with the built in virtual keyboard. I don't use an external keyboard - so I cannot attest to the possibility of that working - but there are no keyboard shortcuts with the iPad keyboard.
-
Is it possible to use the ipad to access a mac mini running mountain lion and back to my mac?
Is it possible to access a mac running mountain lion using Back to my Mac?
To my knowledge the iPod can only be used as a secondary monitor since you have to boot up the Mac and turn on the secondary display. You would still need a KB and pointing device for the Mac
However, you can log into the Mini from an iOS device like an iPad using app like LogMeIn, GoTo MyPC or TeamViewer on both the Mac and the iPad. You use the touch screen on the iPad for all control of the Mac.
As you said,that would be tedious for a lot of typing but you could use a BT keyboard for the iPad.
Maybe you are looking for
-
ORA-20160: Encountered an error while getting the ORACLE user account.
when users trying to apply for the leave . Once they apply for the leave and the respective manager approves it. They get an notification mail with the error message The changes were not applied because ORA-20160: Encountered an error while getting t
-
Hi all, please i need help..... last june i register and took my first oracle exam(1z0-042) at one of the prometrics testing site. and last weekend i took my second exam (1z0-007) but after finishing my exam i realised that instead of my correct prom
-
BAPI/FM to modify the FI posting period
Hi All, Is there any BAPI/FM to Modify the FI posting period. I know we can use BDC on TCode OB52 for modifying the FI posting period. But i want to keep this as a last option. Thanks, Sridhar
-
Hello experts, I was trying to develop a add-on in SAP B1 for GL Account consolidation with two companies. I wondering if someone can help me out. This consolidation of GL Balance of sub companies to parent company database.
-
DVCProHD 720 30p Problems in PPro CS6
I have some DVCProHD 720 30p footage in a QT container that I am unable to use in Premiere CS6. When I import the footage, I get just a white frame throughout the entire footage. This does not occur on any other footage that I have and I do not have