Unable to Access Web Site (with same name) outside of Local Network

Hi everyone,
I have my web site (and some other services) hosted outside of my network by my hosting provider, but handle all other items using OS X Server on my network (i.e. Wiki and so forth).
The problem is now that I am unable to access my website at www.mydomain.com from within the network. I have external DNS set up for www.mydomain.com to point to my website, while mydomain.com points to my OS X Server (static IP address). Internally in OS X Server's DNS settings this used to work when I had www.mydomain.com resolving to the IP address of my web host, in addition to the default domain settings that OS X had set up. For some reason this is no longer working, and I am unable to figure out why.
Using latest version of OS X Server 3.0.2.
Any help is greatly appreciated. Thanks!
Update: this ended up being a redirect issue on the web host. I added another subdomain that was hosted externally, and it worked fine. For some reason my web host is redirecting www.mydomain.com to domain.com.

I am in Texas and cannot get to that site either. Do you know for sure the site is up and working? It could just be down (for days, a site I support was down for almost 4 full days a few weeks ago due to a virus problem).
This may (again, may) be your problem: I see you have a173.48.x.x (you really should x-out the last two octets of your IP address for privacy reasons), I am on a 173.74.x.x address; I know some people have had problems with getting to some sites now that they have a 173.x.x.x address. I think Verizon obtained addresses in that range and some of the addresses apparently previously belonged to spammers or some malicious folks.Some sites (web sites, intermeidate routers, etc.) blocked those addresses, and may not have updated their filters to remove the block on those addresses because they don't know that Verizon now owns them. If this is the problem, eventually those filters will get updated and you will be able to access the site, but this could be a fairly long time.
If you know how to contact that site I suggest you email them about the problem. You can also try turning off your router overnight and when you turn it back on the next day you may find that you have a different address (one that doesn't start with 173) that will allow you to get to the site.
I don't think there is much Verizon can do to help, it is not their site that is blocking your address (at least I don't think it is).
Hope this helps.
Justin
Verizon FiOS TV, Internet, and phone
IMG 1.6.2, Build 08.58
Keller, TX 76248

Similar Messages

  • DOD access card certificates not recognized when trying to access web sites with a card reader while older version of firefox did.

    In the past I have been able to access web sites that require certificates pulled from a common access card inserted into a card reader attached to my Mac. Since I have updated to the newer version of Firefox, the sites that I am trying to gain entry to are not recognizing either the card, card reader or those certificates. If I use Safari or my work computer, the sites recognize my card and certificates and I am grated entry. I would use Safari but I like the format of Firefox for the specific tasks that require the access card. Just looking for a solution. Firefox does open other sites just fine. It's just the ones that require the card, reader and certificates.

    Anything here:
    * [[/questions/808161]] Trying to use a CAC smart card reader with Mac version of Firefox
    * [[/questions/752709]] Having problems configuring FireFox to use a CAC reader

  • Unable to protect 2 computers with same name, but different Domains

    DPM 2012 R2 and UR2
    All DC:s and servers are 2012 R2 + Latest patches.
    ad.A.com has full  2 Way trust with ad.B.com. (Different forrest)
    DPM Server is DPM.ad.A.com
    Computer EXCH.ad.A.com is protected without problem 
    Computer SQL.ad.B.com  is protected without problem
    When I try to attach agent from EXCH.ad.B.com I'll get problems.
    Error 346: DPM is unable to retrieve the configuration information from EXCH.ad.B.com
    I'll guess this has to do with same name of computer, although in different domains.  Is this as Designed, or is it a defect? 
    /Peter

    please try a different User to attach/install the DPM Agent.
    if this is not the solution, you maybe have a Problem with wmi, try and test with wbemtest
    Seidl Michael | http://www.techguy.at |
    twitter.com/techguyat | facebook.com/techguyat

  • Unable to monitor two databases with same name on two different hosts

    I have got two databases with same name on two different hosts. I added one database to the list of monitored databases. Now If I try to add the other one , I get the message that the database is already being managed.
    Can't we monitor two databases with same name on two different hosts?

    you can... while saving the target,give a different name.. for eg target-2

  • Failed to deploy web application with same name twice

    Hello-
    On Oracle 10g Application server I deployed an WAR file called "anbadmin", then undeployed it. The undepoloyment failed from the OEM so I undeployed it manually via removing its entries from server.xml.
    When I tried to deploy it again with the same name I got this:
    Failed to deploy web application "anbadmin". Failed to deploy web application "anbadmin". . The evaluate phase failed. The Adapter used in the evaluate may have thrown an exception.
    Resolution:
    Please call Oracle support.
    Base Exception:
    java.lang.NoSuchMethodError
    null. java.lang.NoSuchMethodError
    Is there a solution for this?
    Regards

    I think I know the solution. We encountered exactly same message and no further deployment could be made. It appeared message in "dcmctl" utility was much more helpfull than the one in EM (though you still have to use "getError" command...)
    If you are using file-based repository, you have to issue command in dcmctl utility "resetFileTransaction". This closes repository and opens it again.
    Myrra

  • Unable to access web sites

    A couple days ago I was having trouble accessing my long-time email web site bookmarked on Firefox and assumed their server was down which happens. Then I discovered that I also can't get to my local bank. The message I get is some version of "Server Not Found" or it just hangs. Then my husband discovered he could get to all of them easily on his Dell.
    I tried other web browsers like Safari, downloaded Firefox again, deleted cookies and caches and downloaded Opera with no luck. I can access all my other web sites and bookmarks through any of these browsers. There have been no crashes or major events.
    We are in Tajikistan now (Central Asia) with the nearest Apple Store several countries away! We use a dial-up modem but have had great internet success--especially with my iBook--since September. We leave for home in a couple weeks but would like to clear this up now since I use the internet often.
    The odd thing is that we live in Williamstown, Massachusetts, and the two web sites I can't access both start with "Williams". You don't think it's some sort of cryptic message that they don't want me back, do you? Or have I been in Central Asia too long?
    Thanks, Kathryn

    Hello Kathryn & Welcome to Apple Discussions!!
    Could you paste the links here of the sites you can not access, so we can try them?
    The odd thing is that we live in Williamstown, Massachusetts, and the two web sites I can't access both start with "Williams". You don't think it's some sort of cryptic message that they don't want me back, do you?
    mmh, no I don't think so ; )
    Message was edited by: Eme

  • Printing on HP P1505 not printing correctly yet Explorer 9 works on same web site with same printer.

    I have download the latest software for Firefox and the HP P1505 printer, but the pictures within the web site print correctly. The text information is not printing correctly. Lots of spaces and the font is a mess. You can read the text information, but it is all over the page. Firefox did print with no issues before 4.0b12. It always worked with the version 3 of course. I really do not want to go back to 3 as 4 is better except for this issue.

    This is a known issue in Firefox 4 beta 12. You could wait til' the RC comes out, or you could grab one of the latest nightly builds availible here that fix this problem: ftp://ftp.mozilla.org/pub/firefox/nightly/latest-mozilla-central/
    Just a note though, nightly versions of firefox are generally less stable than betas or releases. I am waiting for the Release Candidate to come out myself. (Should be early next week)

  • When I open a new tab the system startes to open a web site with the name of funmoods search. How can I change back to a blank tab?

    When I click on the + sign to open a new tab it was opening to a blank window, Today it started to opening to a web site called funmoods search. I would like to restore to where it comes up blank. Please help! Thanks Dan

    Hi,
    You may have to change the setting in the application itself or disable the app in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''', click '''Extensions''' on the left. If that doesn't work, try to uninstall the application. Please also see [http://funmoods.com/terms this] (the third bulleted point).

  • Network Place to SharePoint 2010 unable to access sub sites with error: "The folder may have been moved or deleted".

    I am working on SharePoint 2010 Enterprise and had recently upgraded our site from Sharepoint 3.0 Services to SharePoint 2010 Enterprise.  Everything seems to be working fine for the site, but there is one issue.  The problem I am running into
    is when I create a Network Place, I am able to view the documents and lists of the main page, but if I click on a folder for a sub site, I get the following error:
    "Documents in this folder are not available.  The folder may have been moved or deleted, or network problems may be preventing a connection to the server.  There is a problem with the web server.  Please try again later or contact the
    server administrator."
    If there were a network issue, I would not be able to navigate around on the main page to lists and document libraries.  This seems to affect all of the sub sites on my site.  Explorer view works if that information is required and I do not get
    error messages using Explorer view.
    Thanks in advanced for any help on this.
    -Thao

    Hi pei jingw,
    You should be able to log in with your Adobe ID/password in lieu of a serial number. Are you able to do that?
    Best,
    Sara

  • Multiple Web Sites with Personal Domain Names - Overview

    I have read through the last 10 pages of these discussions and have almost worked this out, but I need some help.
    Problem:
    I want to publish and edit two separate web sites with their own, individual, personal web addresses
    from the same user account on the same Mac using iWeb '08 (2.0.2) and my .Mac account
    _So far:_
    I have purchased and registered the two domain names (with Cheap-DomainRegistration.com)
    I have configured the CNAME to point to web.mac.com, and "Set up a Personal Domain" in iWeb successfully, but using a separate Mac for each web site.
    The two sites work great.
    _What (I think) I need to know:_
    (excuse me for copying these posts out, but I can't find a way to link them to this post)
    1) Should I be using iWebSites as suggested by Old Toad (posted Jan 24 in response to StAnNe's "Multiple Websites--HELP!!!")?
    I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
    2) Should I be using Mireille's approach (also posted Jan 24 in response to StAnNe's "Multiple Websites--HELP!!!")?
    Yes you are correct in the thought that with a family pack you can use different accounts and that is the easiest way to upload with one click to .mac. But it is still possible to publish differents sites to one .mac account if that is all one has. Even if the sites are in one domain file each purchased mysite.com domain name purchased can be pointed to a different page in the site
    Look at it this way
    Original Poster has
    site1 page 1 page 2 and so on
    then he/she has brothersite page 1 and so on.
    They each have a domain name purchase wherever
    then site1domain.com is forwarded to site 1 page1
    and brotherdomain.com is forwarded to brothersite page 1.
    Even though both sites are in the same file they do not have anything to do with each other.
    This is one possibility there are others but for a novice user this could be the way to go for simplicity.
    (Mireille, if you're there, can you clarify what you said - thank you)
    3) Would I use Roddy's fix (posted Jan 23 in response to canadensis' "Publishing Multiple Websites?")?
    Here's an example of how you can separate two websites that are on the same domain file.
    Quit iWeb
    Create a new folder on your desktop and call it "iWeb Sites".
    Inside this folder create two more - Website A, Website B.
    Go to Home Folder/Library/Application Support/iWeb and copy your domain file - command C
    Paste this into folders A and B - command V - and also paste a copy of it somewhere else - like in Docs - in case you make a mistake!
    Double click the domain file in the folder Website A - this will launch iWeb.
    In the left column, delete site B, save and quit iWeb.
    Double click the domain file in the folder Website B to launch iWeb.
    Delete website A, save and quit.
    Drop the iWeb sites folder into your Home Folder.
    If you want quick access to this folder you can highlight it and do command L to create an alias to leave on the desktop.
    From now on, to launch any site in iWeb you open its folder in the iWebsites folder and double click the domain file.
    This is not necessary when you are working on only one site as iWeb saves the domain file of the last site you were working on to Home Folder/Library/Application Support/iWeb. When you open the iWeb application, the last site you worked on will be launched.
    Summary:
    I'm not sure if some of the answers in previous discussions allow for personal domain names, which is what I need.
    I would be very grateful for any suggestions as I'm getting bogged down.
    Many Thanks,
    Jeff

    When you said, "you don't need to do CNAME for both sites…", would this method still allow me to use personal web addresses for both sites?
    Yes. With "Ordinary Forwarding" you normally just type your .Mac url (web.mac.com/username/sitename) into a form at the place where you have your name.
    I thought I was using 'web.mac.com' as the 'www' CNAME (alias) for my personal domain name (web address), so that when someone typed in my personal domain name they would 'go' to the domain registration location, which would then pass it on to the .Mac server, where my web site is hosted.
    That's exactly right. It's just not the only way to do that. Ordinary Forwarding is another way, but it differs in terms of what appears in the address bar of the browser. Either you will see web.mac.com/username/.... or, if you add "masking", you will see your personal name for all pages. The CNAME method results in a address bar that reads www.myname.com/sitename/pagename.html.
    Am I way off?
    All help gratefully received,
    Jeff

  • Firefox icon disappeared, have to use Internet Explorer to access web sites. Although I can get into Yahoo home page, am unable to open e-mail account.

    Turned on computer this am and firefox icon not there. Used Internet Explorer to access web sites. Was able to access my Yahoo home page but not able to open my e-mail account. I am not savvy enough to change settings by myself, so I really need help.
    Thank you

    Hi--I tried your suggestion and no dice. A window came up with the following:The item 'Firefox.exe' that has this shortcut will no longer work properly. Do you want to delete?
    Another window said 'C:Program files (x86) Mozilla Firefox\firefox.exe' specified in the target box is not valid. Make sure the path and file name are correct.
    I have no clue as to what that means. I did delete the shortcut.
    Finally went into our Kaspersky virus protection and found Firefox is in quarantine and that is probably why I am unable to uninstall and reinstall.
    Any ideas????
    Thanks, Ginny

  • Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found  This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting?  T

    I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
    Have published iweb site for five years with no problems and just opened a new site and get -
    404: Page not found 
    This error is generated when there was no web page with the name you specified at the web site.-
    Troubleshooting suggestions:
    Ensure the page you are linking to exists in the correct folder.
    Check your file name for case sensitivity . Index.htm is not the same as index.htm!
    Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
    is the problem with
    iweb or with hosting?
    One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
    to local folder. NWS has checked sttting a few times-
    Any help would be extremely appreciated as trying to fix this for about five weeks
    Thanks VG
    <Email Edited by Host>

    It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
    You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
    If that's not the page you are having trouble with, what is that page's URL?

  • Safari Does Not Allow Access to Web Sites With Wildcard X.509 Certificates

    I'm really getting irritated with the Safari browser in OSX Mavericks.  One of the more irritating features involves the inability to access web sites that use improperly constructed wildcard X509 certificates.  By improperly constructed, I mean that the X.509 certificate does not contain the host name of the system being accessed in the Subject Alternate Name list.
    Earlier versions of Safari would, at least, allow me to examine the X.509 certificate and determine whether I wanted to proceed with the connection.  The current version of Safari doesn't provide that option.  It simply displays a screen stating that it can't establish a secure connection to the web site.  If you actually have a need to access the web site, you need to use a web browser like Firefox.
    What's really irritating about this is that Safari had improved to the point where it was reliable enough to be used as the default browser.
    Is there a Safari.plist setting that will allow me to change the behavior of Safari when it encounters an improperly constructed X.509 certificate and provide me the opportunity to examine the certificate to decide whether to proceed or not?

    Hi
    Have a look in your Networks panel in System Preferences. Click on the Advanced button, then Proxies. There may be an errant proxy present blocking the site load.

  • Can't access some web sites with version 4.0

    I recently installed version 4.0 and am in test phase of the server.
    With or without ACL's turned on, I can't access the following web site
    https://www.sunnet.sunlife.com/member/signin/index.asp?
    or
    https://www.sunnet.sunlife.com/member/
    In Internet Explorer, it sits on a blank page with the little world logo spinning around until it finally times out after a few minutes. I've tried accessing these sites with both IE6 and IE 5.5 and get the same problem.
    As a footnote, the web access to these sites works fine with our current Web Proxy version 3.6.
    Does anyone have any ideas why this isn't working through the new Proxy 4.0?
    Thanks

    I did some additional testing through Proxy 4. All web sites and web pages including secure sites that I tried accessing over the past couple of days all appear to work fine with the exception of the forementioned sites. Access to these specific web pages (which I cannot currently access) are part of our day-to-day business requirements, and therefore will prevent me from using Proxy version 4.0 as our production proxy unless I can figure out why these web pages won't load, and how to fix the problem.
    As an experiment, I tried to access these web pages through Proxy 4 with Mozilla FireFox and Netscape 7. None of these web browsers (including Internet Explorer) will bring up these web pages when going through Proxy 4. But bypassing the proxy or going through our v3.6 proxy works fine for these web pages everytime, and with all browsers. This leads me to believe that this web page access problem is not a browser specific problem, but something in Proxy 4 isn't processing the request to display the page properly.
    As a reference, the web site in question is http://www.sunlife.ca. On the left hand side of the page go to "Sign In" then "Plan Members". Thats where the request hangs through Proxy 4 no matter which browser I use, including Netscape... but works perfectly fine with Proxy v3.6.
    Can someone who is running a version 4 Proxy also please try to access the SunLife Members login page and see if it works or fails for you?
    Thanks

  • Just recently I am getting the following error message when trying to access web sites. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. It is an issue with some plug-in?

    Just recently I am getting the following error message when trying to access web sites. I am using Firefox browser version 10.0.2. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" as the web site page is being displayed in browser winder. Then I have to click ok. It doesn't matter what web link/site I go to it happens. It is an issue with some plug-in?

    I have advised McAfee's product team of the problem and this thread, and they're looking into it now.

Maybe you are looking for