Unable to activate namespace while using external defintions for mapping.

Hi,
In my scenario, am using XSD's imported as External defintions as my req and res message types. In the message interface the req and res namespace of the imported XSD's are different to the one in which the rest of the objects are created. Now, when I activate the objects, am getting the follwing error - Namespace urn:wb.apdrp.testwsdl.com is not defined in the software component version WBSEDCL_TEST_00 , 1.0 of wbsedcl, please help...
Regards
Sathish

Hi,
It is possible to activate the objects in the namespace and not the namespace. I got the following error when i tried to activate my message interface.
Internal problem occurred (INTERNAL_PROBLEM) -
MESSAGE ID: com.sap.aii.utilxi.swing.framework.rb_exceptions.INTERNAL_PROBLEM
STACKTRACE:
com.sap.aii.utilxi.swing.framework.FrameworkException: Internal problem occurred
java.lang.NullPointerException -
com.sap.aii.utilxi.swing.framework.FrameworkException: Internal problem occurred
java.lang.NullPointerException
    at com.sap.aii.ibrep.gui.interfaces.ExternalDefinitionController.genericFrameworkEvent(ExternalDefinitionController.java:92)

Similar Messages

  • Unable to see logs while using split tunnel for RA

    hi everyone,
    I have config RA   VPN at my home lab using split tunnel.
    I can connect fine and able to browse the internet.
    When i go to internet sites i do not see logs generated on the VPN ASA?
    Need to understand whats the reason behind this?
    ASA1# sh conn all
    5 in use, 12 most used
    UDP outside  10.0.0.51:138 inside  10.0.0.255:138, idle 0:01:38, bytes 201, flags -
    TCP outside  192.168.98.2:49509 NP Identity Ifc  192.168.1.171:443, idle 0:00:07, bytes 1067370, flags UOB
    TCP outside  192.168.98.2:49507 NP Identity Ifc  192.168.1.171:443, idle 0:00:03, bytes 137779, flags UOB
    UDP outside  192.168.98.2:49903 NP Identity Ifc  192.168.1.171:500, idle 0:00:01, bytes 40927, flags -
    TCP outside  192.168.99.2:35902 NP Identity Ifc  192.168.1.171:22, idle 0:00:00, bytes 179887, flags UOB
    Where 192.168.98.2 is IP of PC.
    10.0.0.51 is IP assigned from VPN pool to PC.
    Regards
    Mahesh

    Hi Mahesh,
    You are using Split Tunnel VPN. This means that you have configured the VPN Client connection to only tunnel specific networks through the VPN Connection while its active. You have probably configured an ACL that contains your LAN network behind the ASA.
    This means that only traffic destined to that LAN network mentioned in the ACL reaches your ASA through the VPN Connection.
    The Internet traffic of the user or any traffic that is NOT destined to that network in the ACL will simply use the VPN Client users PCs local Internet connection or local network.
    This is the reason you are not seeing any of the Internet connections from the VPN Client on the ASA. The VPN Client connection is only configured to forward traffic to the LAN network and pass all other traffic past the VPN Connection through the users local network connection.
    If you were to configure Full Tunnel VPN for the user this would mean that ALL traffic would be forwarded from the VPN Client through the ASA and the ASA would control where that traffic would be forwarded and if that traffic would be allowed.
    If you want to look at the current configuration on the CLI you would first have to issue
    show run tunnel-group
    And find the connection that you are using at the moment. Then you would have to check what "group-policy" is configured under that "tunnel-group"
    Then you could issue the command
    show run group-policy
    This would list you the Group Policy configuration for the VPN connection and would show something like this under it
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value
    The above configuration would show you the ACL that the VPN Client configuration is using to tell the VPN Client what traffic to send through the VPN Connection.
    Hope this helps
    - Jouni

  • How to set correct audio output while using external screen for presentation purposes over a wire

    while trying to make a presentation or simply playing a video from my MacBookAir over thunderbolt/HDMI table to large screen I am experiencing problems with audio only being played from the MBA and not the soundsystem built in to that screen (unless using a VLS application and manually selecting the audio output target).
    Please help in finding how to steer audio output device  using 2in1 cable such as thunderbolt?

    Hi jar9,
    If you are not hearing audio over your HDMI/Thunderbolt connection, you may want to see if it is showing up as a selectable audio output as outlined in the following article:
    OS X Mavericks: If you can’t hear sound from your speakers
    http://support.apple.com/kb/PH13841
    Regards,
    - Brenden

  • After upgrading to Lion, the Finder will increase the virtual memory while using external HD

    after upgrading to Lion, the Finder will increase the "virtual memory size" while using external HD. I check it using Activity Monitor and found that "Finder" wll increase the "Virtual Memory Size" and "Private Memory Size". and then after a while. the system told me my HD is full and hanging there.
    My External HD is 1TB. and I have installed new version Paragon NTFS for Mac V.9.01. I am not sure it is related or not.
    but I attached my external HD. the "Finder" will start to increase the "Virtual Memory Size".
    please help out this case and solve this issue.
    thank you !!!

    The one has nothing to do with the other. Virtual memory size and Private memory size are used by developers to analyze their software. it has nothing to do with anything related to the user.

  • [ps3mediaserver][pms-svn][AUR] No sound while using external subtitles

    Greetings everyone,
    I am experiencing some weird behavior while using External Subtitles, e.g. Playing an AVI file with PS3MediaServer works fine but playing the very same AVI file with external subtitles gives me the video with subtitles and no sound.
    My Server configuration is as follows :
    Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
    RAM :2048 Mo
    OS : Archlinux 2.6.37-ARCH #1 SMP PREEMPT Tue Mar 8 08:34:35 CET 2011 x86_64
    Target : Playstation 3 Slim, firmware 3.60
    Here are the various Sofware versions I use :
    PMS version I am using is PS3 Media Server 1.21.0 (built from AUR, PKG: pms-svn)
    Java version is Java: 1.6.0_22-Sun Microsystems Inc.
    MPlayer version is "MPlayer SVN-r32792-4.5.2 (C) 2000-2011 MPlayer Team" and so is "MEncoder SVN-r32792-4.5.2 (C) 2000-2011 MPlayer Team"
    TSMuxer version is "1.10.6-10"
    FFMpeg version is "FFmpeg version git-2611e52"
    The network configuration of the server is : 192.168.0.20, netmask 255.255.255.0 ; 100MBits Full Duplex (Wired)
    The network configuration of the Playstation 3 is : 192.168.0.15, netmask 255.255.255.0 ; Auto (Wired, no WiFi !)
    Both are linked on a 100MBits Switch : Playstation 3 <--> Switch 100 Mbits <--> PS3 Media Server
    My PMS.conf is :
    thumbnails = true
    language =
    prevents_sleep_mode = true
    folders = \/srv\/shares
    network_interface = eth0
    hide_empty_folders = true
    hide_media_library_folder = true
    hide_transcode_folder = true
    hide_enginenames = true
    enable_archive_browsing = false
    audio_thumbnails_method = 2
    mencoder_subfribidi = false
    mencoder_disablesubs = false
    autoloadsrt = true
    hostname =
    port = 5001
    thumbnail_seek_pos = 10
    nbcores = 4
    turbomode = true
    minimized = false
    hidevideosettings = false
    charsetencoding = 850
    engines = mencoder,avsmencoder,tsmuxer,mplayeraudio,ffmpegaudio,tsmuxeraudio,mencoderwebvideo,mplayervideodump,mplayerwebaudio,ffmpegdvrmsremux
    avisynth_convertfps = true
    avisynth_script = #AviSynth script is now fully customisable
    transcode_block_multiple_connections = false
    tsmuxer_forcefps = true
    tsmuxer_preremux_pcm = false
    tsmuxer_preremux_ac3 = false
    audiochannels = 2
    audiobitrate = 384
    maximumbitrate = 0
    skiploopfilter = false
    mencoder_fontconfig = false
    mencoder_font =
    mencoder_forcefps = false
    mencoder_usepcm = false
    mencoder_intelligent_sync = true
    mencoder_decode =
    mencoder_encode = keyint=1:vqscale=1:vqmin=2
    mencoder_nooutofsync = true
    # mencoder_audiolangs = fre,eng
    # mencoder_sublangs = fre,off;fr,off;eng,off;en,off
    mencoder_audiosublangs = fre,off;fr,off;eng,off;en,off
    mencoder_ass_scale = 1.0
    mencoder_ass_margin = 10
    mencoder_ass_outline = 1
    mencoder_ass_shadow = 1
    mencoder_noass_scale = 3
    mencoder_noass_subpos = 2
    mencoder_noass_blur = 1
    mencoder_noass_outline = 1
    mencoder_subcp = cp1252
    mencoder_ass = false
    mencoder_yadif = false
    mencoder_scaler = false
    mencoder_scalex = 0
    mencoder_scaley = 0
    ffmpeg = -g 1 -qscale 1 -qmin 2
    # The next value has to be chosen very carefully: to low = possible stuttering if the network is congested, but
    # to high causes the java heap to be to small. Check the -Xmx-setting in /opt/pms/PMS.sh and raise it to 1024M
    # or higher if you see unexplainable Out Of Memory-errors in the debug.log
    maxvideobuffer = 400
    use_mplayer_for_video_thumbs = false
    # The next value sorts your media files. 0 (default) = A-Z while 1 = Z-A
    sort_method =
    usecache = true
    forcetranscode=
    Here are the tests I have run :
    MediaInfo output
    General
    Complete name : test without subs.avi
    Format : AVI
    Format/Info : Audio Video Interleave
    File size : 350 MiB
    Duration : 42mn 24s
    Overall bit rate : 1 153 Kbps
    Writing application : transcode-1.0.6
    Video
    ID : 0
    Format : MPEG-4 Visual
    Format profile : Advanced Simple@L5
    Format settings, BVOP : 2
    Format settings, QPel : No
    Format settings, GMC : No warppoints
    Format settings, Matrix : Default (H.263)
    Codec ID : XVID
    Codec ID/Hint : XviD
    Duration : 42mn 24s
    Bit rate : 978 Kbps
    Width : 624 pixels
    Height : 352 pixels
    Display aspect ratio : 16:9
    Frame rate : 23.976 fps
    Color space : YUV
    Chroma subsampling : 4:2:0
    Bit depth : 8 bits
    Scan type : Progressive
    Compression mode : Lossy
    Bits/(Pixel*Frame) : 0.186
    Stream size : 296 MiB (85%)
    Writing library : XviD 1.2.1 (UTC 2008-12-04)
    Audio
    ID : 1
    Format : MPEG Audio
    Format version : Version 1
    Format profile : Layer 3
    Mode : Joint stereo
    Codec ID : 55
    Codec ID/Hint : MP3
    Duration : 42mn 23s
    Bit rate mode : Variable
    Bit rate : 160 Kbps
    Channel(s) : 2 channels
    Sampling rate : 48.0 KHz
    Compression mode : Lossy
    Stream size : 49.4 MiB (14%)
    Alignment : Aligned on interleaves
    Interleave, duration : 24 ms (0.58 video frame)
    Writing library : LAME3.90.
    Encoding settings : -m j -V 4 -q 2 -lowpass 18 --abr 160
    And its very same but with external subtitles :
    -rw-r--r-- 1 svc-pms svc-pms 77159 Oct 12 12:57 test with subs.srt
    -rw-rw-r-- 1 svc-pms svc-pms 366711578 Oct 23 10:50 test with subs.avi
    MediaInfo output, just to acknowledge it is the same file, but with a different name
    General
    Complete name : test with subs.avi
    Format : AVI
    Format/Info : Audio Video Interleave
    File size : 350 MiB
    Duration : 42mn 24s
    Overall bit rate : 1 153 Kbps
    Writing application : transcode-1.0.6
    Video
    ID : 0
    Format : MPEG-4 Visual
    Format profile : Advanced Simple@L5
    Format settings, BVOP : 2
    Format settings, QPel : No
    Format settings, GMC : No warppoints
    Format settings, Matrix : Default (H.263)
    Codec ID : XVID
    Codec ID/Hint : XviD
    Duration : 42mn 24s
    Bit rate : 978 Kbps
    Width : 624 pixels
    Height : 352 pixels
    Display aspect ratio : 16:9
    Frame rate : 23.976 fps
    Color space : YUV
    Chroma subsampling : 4:2:0
    Bit depth : 8 bits
    Scan type : Progressive
    Compression mode : Lossy
    Bits/(Pixel*Frame) : 0.186
    Stream size : 296 MiB (85%)
    Writing library : XviD 1.2.1 (UTC 2008-12-04)
    Audio
    ID : 1
    Format : MPEG Audio
    Format version : Version 1
    Format profile : Layer 3
    Mode : Joint stereo
    Codec ID : 55
    Codec ID/Hint : MP3
    Duration : 42mn 23s
    Bit rate mode : Variable
    Bit rate : 160 Kbps
    Channel(s) : 2 channels
    Sampling rate : 48.0 KHz
    Compression mode : Lossy
    Stream size : 49.4 MiB (14%)
    Alignment : Aligned on interleaves
    Interleave, duration : 24 ms (0.58 video frame)
    Writing library : LAME3.90.
    Encoding settings : -m j -V 4 -q 2 -lowpass 18 --abr 160
    A- I tried playing the AVI file without external subtitles and it is working fine. 
    /var/log/pms.log :
    GUI environment not available
    Switching to console mode
    [main] TRACE 06:17:02.228 Starting PS3 Media Server 1.21.0
    [main] TRACE 06:17:02.237 by shagrath / 2008-2011
    [main] TRACE 06:17:02.237 http://ps3mediaserver.org
    [main] TRACE 06:17:02.237 http://ps3mediaserver.blogspot.com
    [main] TRACE 06:17:02.238 http://code.google.com/p/ps3mediaserver
    [main] TRACE 06:17:02.238
    [main] TRACE 06:17:02.238 Java: 1.6.0_22-Sun Microsystems Inc.
    [main] TRACE 06:17:02.238 OS: Linux amd64 2.6.37-ARCH
    [main] TRACE 06:17:02.238 Encoding: UTF-8
    [main] TRACE 06:17:02.238 PMS.conf: /filers/fvEXT3-01/_applications_/opt/pms/PMS.conf
    [main] TRACE 06:17:02.238 Working directory: /filers/fvEXT3-01/_applications_/opt/pms
    [main] TRACE 06:17:02.245 Temp folder: /tmp/ps3mediaserver
    [main] TRACE 06:17:02.652 Loading configuration file: FreeboxHD.conf
    [main] TRACE 06:17:02.662 Loading configuration file: XBMC.conf
    [main] TRACE 06:17:02.666 Loading configuration file: FreecomMusicPal.conf
    [main] TRACE 06:17:02.669 Loading configuration file: XBOX360.conf
    [main] TRACE 06:17:02.685 Loading configuration file: PS3.conf
    [main] TRACE 06:17:02.705 Loading configuration file: Streamium.conf
    [main] TRACE 06:17:02.708 Loading configuration file: WDTVLive.conf
    [main] TRACE 06:17:02.710 Loading configuration file: N900.conf
    [main] TRACE 06:17:02.712 Loading configuration file: Philips.conf
    [main] TRACE 06:17:02.715 Loading configuration file: Bravia4500.conf
    [main] TRACE 06:17:02.718 Loading configuration file: WMP.conf
    [main] TRACE 06:17:02.720 Loading configuration file: Samsung.conf
    [main] TRACE 06:17:02.722 Loading configuration file: Bravia5500.conf
    [main] TRACE 06:17:02.724 Loading configuration file: Realtek.conf
    [main] TRACE 06:17:02.726 Loading configuration file: Kuro.conf
    [main] TRACE 06:17:02.729 Loading configuration file: Android.conf
    [main] TRACE 06:17:02.731 Loading configuration file: BraviaEX.conf
    [main] TRACE 06:17:02.734 Loading configuration file: PopcornHour.conf
    [main] TRACE 06:17:02.736 Checking font cache... launching simple instance of MPlayer... You may have to wait 60 seconds!
    [main] TRACE 06:17:04.173 Done!
    [main] TRACE 06:17:04.210 Loading plugins from /filers/fvEXT3-01/_applications_/opt/pms/plugins
    [main] TRACE 06:17:04.227 No plugins found
    [main] TRACE 06:17:04.257 Registering transcoding engine FFmpeg Audio
    [main] TRACE 06:17:04.300 Registering transcoding engine MEncoder
    [main] TRACE 06:17:04.300 Registering transcoding engine MPlayer Audio
    [main] TRACE 06:17:04.301 Registering transcoding engine MEncoder Web
    [main] TRACE 06:17:04.301 Registering transcoding engine MPlayer Video Dump
    [main] TRACE 06:17:04.301 Registering transcoding engine MPlayer Web
    [main] TRACE 06:17:04.303 Registering transcoding engine TsMuxer
    [main] TRACE 06:17:04.303 Registering transcoding engine Audio High Fidelity
    [main] TRACE 06:17:04.303 Registering transcoding engine VLC Audio Streaming
    [main] TRACE 06:17:04.304 Registering transcoding engine VLC Video Streaming
    [main] TRACE 06:17:04.304 Registering transcoding engine Raws Thumbnailer
    [main] TRACE 06:17:04.401 Scanning network interface eth0 / eth0
    [main] TRACE 06:17:04.403 Using address /192.168.0.20 found on network interface: name:eth0 (eth0) index: 2 addresses: /192.168.0.20;
    [main] TRACE 06:17:04.403 Created socket: /192.168.0.20:5001
    [main] TRACE 06:17:04.548 Using database located at : /filers/fvEXT3-01/_applications_/opt/pms/database
    [main] TRACE 06:17:04.930 A tiny media library admin interface is available at: http://192.168.0.20:5001/console/home
    [main] TRACE 06:17:05.001 Using the following UUID: d83f2e45-d8b8-3db7-b0ff-a6fc95ce046c
    [New I/O server worker #1-1] TRACE 06:17:08.787 Renderer Playstation 3 found on this address: /192.168.0.15
    [main] TRACE 06:17:09.902 It's ready! You should see the server appear on the XMB
    [New I/O server worker #1-1] TRACE 06:17:10.794 Renderer Playstation 3 has an estimated network speed of: 93 Mb/s
    /opt/pms/debug.log :
    available at : http://dpaste.org/774i/
    B - I tried playing the AVI file with external subtitles (SRT) and the file is playing with subtitles but no sound :-(
    /var/log/pms.log :
    GUI environment not available
    Switching to console mode
    [main] TRACE 06:20:24.967 Starting PS3 Media Server 1.21.0
    [main] TRACE 06:20:24.968 by shagrath / 2008-2011
    [main] TRACE 06:20:24.968 http://ps3mediaserver.org
    [main] TRACE 06:20:24.968 http://ps3mediaserver.blogspot.com
    [main] TRACE 06:20:24.968 http://code.google.com/p/ps3mediaserver
    [main] TRACE 06:20:24.969
    [main] TRACE 06:20:24.969 Java: 1.6.0_22-Sun Microsystems Inc.
    [main] TRACE 06:20:24.969 OS: Linux amd64 2.6.37-ARCH
    [main] TRACE 06:20:24.969 Encoding: UTF-8
    [main] TRACE 06:20:24.969 PMS.conf: /filers/fvEXT3-01/_applications_/opt/pms/PMS.conf
    [main] TRACE 06:20:24.969 Working directory: /filers/fvEXT3-01/_applications_/opt/pms
    [main] TRACE 06:20:24.973 Temp folder: /tmp/ps3mediaserver
    [main] TRACE 06:20:25.038 Loading configuration file: FreeboxHD.conf
    [main] TRACE 06:20:25.040 Loading configuration file: XBMC.conf
    [main] TRACE 06:20:25.041 Loading configuration file: FreecomMusicPal.conf
    [main] TRACE 06:20:25.044 Loading configuration file: XBOX360.conf
    [main] TRACE 06:20:25.047 Loading configuration file: PS3.conf
    [main] TRACE 06:20:25.055 Loading configuration file: Streamium.conf
    [main] TRACE 06:20:25.057 Loading configuration file: WDTVLive.conf
    [main] TRACE 06:20:25.059 Loading configuration file: N900.conf
    [main] TRACE 06:20:25.061 Loading configuration file: Philips.conf
    [main] TRACE 06:20:25.063 Loading configuration file: Bravia4500.conf
    [main] TRACE 06:20:25.065 Loading configuration file: WMP.conf
    [main] TRACE 06:20:25.068 Loading configuration file: Samsung.conf
    [main] TRACE 06:20:25.069 Loading configuration file: Bravia5500.conf
    [main] TRACE 06:20:25.071 Loading configuration file: Realtek.conf
    [main] TRACE 06:20:25.073 Loading configuration file: Kuro.conf
    [main] TRACE 06:20:25.076 Loading configuration file: Android.conf
    [main] TRACE 06:20:25.077 Loading configuration file: BraviaEX.conf
    [main] TRACE 06:20:25.080 Loading configuration file: PopcornHour.conf
    [main] TRACE 06:20:25.082 Checking font cache... launching simple instance of MPlayer... You may have to wait 60 seconds!
    [main] TRACE 06:20:25.144 Done!
    [main] TRACE 06:20:25.153 Loading plugins from /filers/fvEXT3-01/_applications_/opt/pms/plugins
    [main] TRACE 06:20:25.153 No plugins found
    [main] TRACE 06:20:25.160 Registering transcoding engine FFmpeg Audio
    [main] TRACE 06:20:25.166 Registering transcoding engine MEncoder
    [main] TRACE 06:20:25.167 Registering transcoding engine MPlayer Audio
    [main] TRACE 06:20:25.167 Registering transcoding engine MEncoder Web
    [main] TRACE 06:20:25.167 Registering transcoding engine MPlayer Video Dump
    [main] TRACE 06:20:25.168 Registering transcoding engine MPlayer Web
    [main] TRACE 06:20:25.169 Registering transcoding engine TsMuxer
    [main] TRACE 06:20:25.169 Registering transcoding engine Audio High Fidelity
    [main] TRACE 06:20:25.170 Registering transcoding engine VLC Audio Streaming
    [main] TRACE 06:20:25.170 Registering transcoding engine VLC Video Streaming
    [main] TRACE 06:20:25.170 Registering transcoding engine Raws Thumbnailer
    [main] TRACE 06:20:25.223 Scanning network interface eth0 / eth0
    [main] TRACE 06:20:25.224 Using address /192.168.0.20 found on network interface: name:eth0 (eth0) index: 2 addresses: /192.168.0.20;
    [main] TRACE 06:20:25.224 Created socket: /192.168.0.20:5001
    [main] TRACE 06:20:25.279 Using database located at : /filers/fvEXT3-01/_applications_/opt/pms/database
    [main] TRACE 06:20:26.010 A tiny media library admin interface is available at: http://192.168.0.20:5001/console/home
    [main] TRACE 06:20:26.017 Using the following UUID: d83f2e45-d8b8-3db7-b0ff-a6fc95ce046c
    [New I/O server worker #1-1] TRACE 06:20:28.867 Renderer Playstation 3 found on this address: /192.168.0.15
    [New I/O server worker #1-1] TRACE 06:20:30.872 Renderer Playstation 3 has an estimated network speed of: 93 Mb/s
    [main] TRACE 06:20:32.488 It's ready! You should see the server appear on the XMB
    [New I/O server worker #1-6] TRACE 06:20:56.875 Starting transcode/remux of test with subs.avi
    So, obviously here, the only thing which changes from before was that, this time, the PS3 Media Server did a transcode/remux of the file (for the subtitles to be streamed)
    /opt/pms/debug.log :
    available at : http://dpaste.org/6XMI/
    I have pasted the complete debug.log but I believe the problem is around this :
    [New I/O server worker #1-6] DEBUG 06:20:56.874 Opened request handler on socket /192.168.0.15:64494 // Playstation 3
    [New I/O server worker #1-6] DEBUG 06:20:56.874 Request: HTTP/1.0 : HEAD : get/0$0$4$0/test+with+subs.avi
    [New I/O server worker #1-6] DEBUG 06:20:56.874 Received on socket: Accept-Encoding: identity
    [New I/O server worker #1-6] DEBUG 06:20:56.874 Received on socket: Cache-Control: no-cache
    [New I/O server worker #1-6] DEBUG 06:20:56.874 Received on socket: Connection: close
    [New I/O server worker #1-6] DEBUG 06:20:56.874 Received on socket: Host: 192.168.0.20:5001
    [New I/O server worker #1-6] DEBUG 06:20:56.874 Received on socket: User-Agent: PLAYSTATION 3
    [New I/O server worker #1-6] INFO 06:20:56.874 HTTP: get/0$0$4$0/test+with+subs.avi / 0-0
    [New I/O server worker #1-6] DEBUG 06:20:56.874 Searching for objectId: 0$0$4$0 with children option: false
    [New I/O server worker #1-6] DEBUG 06:20:56.875 Asked stream chunk [0-0] timeseek: 0.0 of test with subs.avi and player MEncoder
    [New I/O server worker #1-6] TRACE 06:20:56.875 Starting transcode/remux of test with subs.avi
    [New I/O server worker #1-6] DEBUG 06:20:56.875 Looking for an audio track with lang: eng
    [New I/O server worker #1-6] DEBUG 06:20:56.883 Looking for an audio track with lang: fre
    [New I/O server worker #1-6] DEBUG 06:20:56.884 Looking for an audio track with lang: jpn
    [New I/O server worker #1-6] DEBUG 06:20:56.886 Looking for an audio track with lang: ger
    [New I/O server worker #1-6] DEBUG 06:20:56.887 Looking for an audio track with lang: und
    [New I/O server worker #1-6] DEBUG 06:20:56.888 Matched audio track: Audio: MP3 / lang: und / ID: 1
    [New I/O server worker #1-6] DEBUG 06:20:56.888 Search a match for: und with fre and off
    [New I/O server worker #1-6] DEBUG 06:20:56.889 Search a match for: und with fr and off
    [New I/O server worker #1-6] DEBUG 06:20:56.889 Search a match for: und with eng and off
    [New I/O server worker #1-6] DEBUG 06:20:56.890 Search a match for: und with en and off
    [New I/O server worker #1-6] DEBUG 06:20:56.891 Found subtitles track: Sub: SubRip / lang: und / ID: 100 / FILE: /srv/shares/test_with_sub/test with subs.srt
    [New I/O server worker #1-6] DEBUG 06:20:56.891 Found external file: /srv/shares/test_with_sub/test with subs.srt
    [New I/O server worker #1-6] DEBUG 06:20:56.892 channels=2
    [mkfifo] INFO 06:20:56.979 Starting mkfifo --mode=777 /tmp/ps3mediaserver/mencoder1300252856978
    [mkfifo] INFO 06:20:56.995 Unix process ID (mkfifo): 4390
    [mencoder] INFO 06:20:57.029 Starting mencoder -ss 0 -quiet /srv/shares/test_with_sub/test with subs.avi -quiet -quiet -oac lavc -of mpeg -quiet -quiet -mpegopts format=mpeg2:muxrate=500000:vbuf_size=1194:abuf_size=64 -ovc lavc -channels 2 -lavdopts debug=0:threads=4 -lavcopts autoaspect=1:vcodec=mpeg2video:acodec=ac3:abitrate=256:threads=4:keyint=1:vqscale=1:vqmin=2 -spuaa 3 -subfont-text-scale 3 -subfont-outline 1 -subfont-blur 1 -subpos 98 -quiet -quiet -sid 100 -quiet -quiet -ofps 24000/1001 -sub /srv/shares/test_with_sub/test with subs.srt -utf8 -mc 0 -noskip -af lavcresample=48000 -srate 48000 -o /tmp/ps3mediaserver/mencoder1300252856978
    [mencoder] INFO 06:20:57.048 Reading pipe: /tmp/ps3mediaserver/mencoder1300252856978
    [mencoder] DEBUG 06:20:57.049 Opening file /tmp/ps3mediaserver/mencoder1300252856978 for reading...
    [New I/O server worker #1-6] DEBUG 06:20:57.129 Sleeping for 6000 milliseconds
    [mencoder] INFO 06:20:57.395 Attaching thread: mencoder
    [Timer-1] DEBUG 06:20:57.396 Buffered Space: 0 bytes / inputs: 0
    [mencoder] INFO 06:20:57.396 Unix process ID (mencoder): 4395
    [Thread-30] DEBUG 06:20:57.396 MEncoder SVN-r32792-4.5.2 (C) 2000-2011 MPlayer Team
    [Thread-30] DEBUG 06:20:57.397 161 audio & 351 video codecs
    [Thread-30] DEBUG 06:20:57.397 success: format: 0 data: 0x0 - 0x15db931a
    [Thread-30] DEBUG 06:20:57.397 AVI file format detected.
    [Thread-30] DEBUG 06:20:57.397 [aviheader] Video stream found, -vid 0
    [Thread-30] DEBUG 06:20:57.397 [aviheader] Audio stream found, -aid 1
    [Thread-30] DEBUG 06:20:57.397 VIDEO: [XVID] 624x352 24bpp 23.976 fps 977.5 kbps (119.3 kbyte/s)
    [Thread-30] DEBUG 06:20:57.397 [V] filefmt:3 fourcc:0x44495658 size:624x352 fps:23.976 ftime:=0.0417
    [Thread-30] DEBUG 06:20:57.397 ==========================================================================
    [Thread-30] DEBUG 06:20:57.397 Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
    [Thread-30] DEBUG 06:20:57.397 AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
    [Thread-30] DEBUG 06:20:57.397 Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
    [Thread-30] DEBUG 06:20:57.397 ==========================================================================
    [Thread-30] DEBUG 06:20:57.397 PACKET SIZE: 2048 bytes, deltascr: 884
    [Thread-30] DEBUG 06:20:57.397 Opening video filter: [expand osd=1]
    [Thread-30] DEBUG 06:20:57.397 Expand: -1 x -1, -1 ; -1, osd: 1, aspect: 0.000000, round: 1
    [Thread-30] DEBUG 06:20:57.397 ==========================================================================
    [Thread-30] DEBUG 06:20:57.397 Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
    [Thread-30] DEBUG 06:20:57.403 Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
    [Thread-30] DEBUG 06:20:57.403 ==========================================================================
    [Thread-27] DEBUG 06:20:57.403 [ac3 @ 0xd37ca0]No channel layout specified. The encoder will guess the layout, but it might be incorrect.
    [Thread-27] DEBUG 06:20:57.437 Limiting audio preload to 0.4s.
    [Thread-27] DEBUG 06:20:57.437 Increasing audio density to 4.
    [Thread-30] DEBUG 06:20:57.463 Movie-Aspect is 1.77:1 - prescaling to correct movie aspect.
    [Thread-30] DEBUG 06:20:57.463 videocodec: libavcodec (624x352 fourcc=3267706d [mpg2])
    [Thread-30] DEBUG 06:20:57.463 [VE_LAVC] Using constant qscale = 1.000000 (VBR).
    [Thread-30] DEBUG 06:20:57.617 Writing header...
    [Timer-1] DEBUG 06:20:59.396 Buffered Space: 26595328 bytes / inputs: 0
    [Thread-28] DEBUG 06:21:01.227 freeMemory: 25791584
    [Thread-28] DEBUG 06:21:01.227 totalMemory: 81592320
    [Thread-28] DEBUG 06:21:01.228 maxMemory: 715849728
    [Thread-28] DEBUG 06:21:01.228 Extending buffer to 419430400
    [Timer-1] DEBUG 06:21:01.397 Buffered Space: 49999872 bytes / inputs: 0
    [Thread-28] DEBUG 06:21:01.726 Done extending
    Thing is, I do not have the same issue with files that are not (yet) MP3-Audio powered, for instance :
    General
    Complete name : /srv/shares/media03/directories/toto.avi
    Format : AVI
    Format/Info : Audio Video Interleave
    Format profile : OpenDML
    Format settings : rec
    File size : 1.59 GiB
    Duration : 1h 46mn
    Overall bit rate : 2 140 Kbps
    Writing application : AVI-Mux GUI 1.17.8.3, Feb 16 201019:42:50
    Video
    ID : 0
    Format : MPEG-4 Visual
    Format profile : Advanced Simple@L5
    Format settings, BVOP : 2
    Format settings, QPel : Yes
    Format settings, GMC : No warppoints
    Format settings, Matrix : Default (H.263)
    Codec ID : XVID
    Codec ID/Hint : XviD
    Duration : 1h 46mn
    Bit rate : 1 620 Kbps
    Width : 1 280 pixels
    Height : 544 pixels
    Display aspect ratio : 2.35:1
    Frame rate : 23.976 fps
    Color space : YUV
    Chroma subsampling : 4:2:0
    Bit depth : 8 bits
    Scan type : Progressive
    Compression mode : Lossy
    Bits/(Pixel*Frame) : 0.097
    Stream size : 1.20 GiB (76%)
    Writing library : XviD 1.2.1 (UTC 2008-12-04)
    Audio #1
    ID : 1
    Format : AC-3
    Format/Info : Audio Coding 3
    Mode extension : CM (complete main)
    Codec ID : 2000
    Duration : 1h 46mn
    Bit rate mode : Constant
    Bit rate : 384 Kbps
    Channel(s) : 6 channels
    Channel positions : Front: L C R, Side: L R, LFE
    Sampling rate : 48.0 KHz
    Bit depth : 16 bits
    Compression mode : Lossy
    Stream size : 292 MiB (18%)
    Alignment : Aligned on interleaves
    Interleave, duration : 64 ms (1.53 video frames)
    Interleave, preload duration : 192 ms
    Title : UW 6ch audio
    Audio #2
    ID : 2
    Format : AC-3
    Format/Info : Audio Coding 3
    Mode extension : CM (complete main)
    Codec ID : 2000
    Duration : 1h 46mn
    Bit rate mode : Constant
    Bit rate : 128 Kbps
    Channel(s) : 2 channels
    Channel positions : Front: L R
    Sampling rate : 48.0 KHz
    Bit depth : 16 bits
    Compression mode : Lossy
    Stream size : 97.4 MiB (6%)
    Alignment : Aligned on interleaves
    Interleave, duration : 64 ms (1.53 video frames)
    Interleave, preload duration : 192 ms
    Title : UW 2ch audio
    This file is well played by PS3 Media Server.
    I am quite confused with this issue ; did anyone experienced the same thing ?
    Best Regards,

    Having the same problem. I'm watching all of my movies without subs now, because transcoding kills the 5.1 audio (no problems with 2 channel audio). A workaround is posted in the comments of the pms-svn package.
    I will post the URL to this thread to another thread with probably the same problem (mplayer/x264). I have not yet seen a real solution to this, and I'm not really familiar with the bugzilla's from both projects.
    Other threads with similar problems:
    https://bbs.archlinux.org/viewtopic.php?id=112219 (devede also uses mplayer and x264)
    https://bugs.archlinux.org/task/22654 (related bug in Archlinux)
    http://bugzilla.mplayerhq.hu/show_bug.cgi?id=1865 (related bug in mplayer)
    https://bbs.archlinux.org/viewtopic.php?id=115165 (this thread)
    Another workaround might be to trick pms into using ffmpeg or vlc rather than mencoder. I'm also streaming to a ps3 - I didn't try it, but it could be as easy as temporarily changing settings inside the profile for a ps3-client.
    Last edited by zenlord (2011-03-22 16:15:38)

  • Turning off internal monitor while using external one

    Hello, Apple Support Communities.
    Before OSX Lion, anyone could turn off internal monitor while using external one, by waking up computer with lid closed, and the internal monitor will be kept turned off. But now, -I wonder what made Apple to think this way- Lion will turn on the internal one back on.
    I don't care about all sorts of reasons why should I or shouldn't I desire to this. I just want it, because I have nice big monitor, which is apparently bigger than my Macbook Pro. Besides using double monitor will just exhaust my poor laptop. -mine is bit old-
    I found ridicoulus answer from community, saying I should try fridge magnet. Sorry, but I don't want risk my whole computer, especially my HDD from getting magnetic damage. It happened so many times, -thanks my little bro- so now I am sick of magnet. I don't think Apple will cover this AKA magnetic damage anyway. -It wouldn't just damage, just erase your HDD-
    So.... Any helpful insights? Thanks.

    Nevermind. I found solution. Though it cost me 24 bucks.
    Now Apple is seriously making me to consider to roll back to sucking Windows.
    Thanks Jobs!

  • I am unable to print anything while using firefox as my browser !

    i am unable to print anything while using firefox as my browser !

    Hi Philip,
    This could be an issue with some corrupt print preferences. In your toolbar go to about:config and reset all of your print.preferences. This could hopefully help!
    - Sarah

  • Unable to activate Workflows can use app permissions feature

    Hi all,
    Iam unable to activate Workflows can use app permissions feature in sharepoint 2013. it throws sorry something went wrong error. Kindly somebody help me in resolving this issue

    Workflows can use app permissions feature is only going to be activated if 
    1) You have configured your workflow manager properly. Make sure there are not issues with your workflow manager and you can create workflow using SP 2013 Workflow Manager.
    2) You have configured apps for SharePoint 2013. Again you will need to make sure that you have hit all the check when configuring SharePoint 2013 apps. 
    Follow these two articles to make sure that you have configured apps for SharePoint 2013.
    http://technet.microsoft.com/en-us/library/fp161236.aspx
    http://sharepointchick.com/archive/2012/07/29/setting-up-your-app-domain-for-sharepoint-2013.aspx
    If you have confirmed that both of the above features are configured properly then check your ULS logs and find the detailed issue using the Correlation ID.
    If this helped you resolve your issue, please mark it Answered

  • Error: 1013231 Unable to update database while in readonly mode for backup

    Hi all,
    Wen im deleting the members for dimendsion , its giving error (hyperion 11.1 aso)
    Error: 1013231 Unable to update database while in readonly mode for backup , how can i solve this problem ,plz can any one help on this
    Thanks

    Has somebody set the database ready for archiving, maybe some maxl has been run and the db has not been returned from read only mode.
    Try running the following Maxl (change app.db to match your app/db)
    alter database app.db end archive;
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Using a lookup for mapping program to retrieve the specific value

    Hi All,
    I have a scenario like …I need to use a lookup for mapping program to retrieve the specific value based on the input parameters.
    Here I have got some rough idea like …
    1. Creation of java program to connect the DB table and access the values, Import this java program as archive into XI.
    2. Creation of user defined function to use the above java program
    3. Include the user defined function in the interface mapping.
    Here I feel it needs some more info to complete this scenario, so can anyone provide the step by step procedure for the above scenario.
    Thanks in advance.
    Vijay.

    Hi Vijay,
    Basically you have embed Database lookup code in the UDF. For all kind of Lookups refer to below links..
    Lookup - /people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
    DB lookup - /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
    SOAP Lookup - /people/bhavesh.kantilal/blog/2006/11/20/webservice-calls-from-a-user-defined-function
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/406642ea59c753e10000000a1550b0
    Lookup’s in XI made simpler - /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
    How to check JDBC SQL Query Syntax and verify the query results inside a User Defined Function of the Lookup API -
    http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
    /people/prasad.illapani/blog/2006/10/25/how-to-check-jdbc-sql-query-syntax-and-verify-the-query-results-inside-a-user-defined-function-of-the-lookup-api
    Lookups - /people/morten.wittrock/blog/2006/03/30/wrapping-your-mapping-lookup-api-code-in-easy-to-use-java-classes
    Lookups - /people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
    /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/406642ea59c753e10000000a1550b0/content.htm
    /people/sap.user72/blog/2005/12/06/optimizing-lookups-in-xi
    Lookups with XSLT - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8e7daa90-0201-0010-9499-cd347ffbbf72
    /people/sravya.talanki2/blog
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14
    How we have to create the lookups?
    Check this weblogs with some screenshots on how to achieve this:
    /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
    /people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
    /people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
    /people/sap.user72/blog/2005/12/06/optimizing-lookups-in-xi
    /people/morten.wittrock/blog/2006/03/30/wrapping-your-mapping-lookup-api-code-in-easy-to-use-java-classes
    Ranjeet Singh.

  • Screen flickers while using external display

    while using my macbook pro with an external display (my sony LCD TV). the external screen (TV) flickers. it goes black for about a second then comes on. it will happen about 20 minutes into watching TV and happens more often the longer i watch. for example i just finished watching a 40 minute video podcast it happened at the halfway point then more often - about 10 minutes later then 5 minutes later - then 2 minutes... the final minutes of the show it happened about 3 times before the end.
    any help? any ideas? i suspect (though i can't prove) it has to do with the setting for the external display.
    thanks

    Can you run memory diagnostics ? Download a pre-compiled bootable iso from http://www.memtest.org/ down the page and make a bootable CD. Boot to this CD and run RAM diagnostic for a couple of hours, maybe overnight, and see if your laptop has RAM errors.
    If you have no RAM defect after the long test above, then uninstall all ATI/AMD gfx card drivers in Programs and Feature in Control Panel. Now go to Device Manager and disable your gfx card, putting a checkmark in the box Uninstall drivers for this hardware. ( Please note this operation will not harm your computer. Windows will redetect your gfx card after restart. )
    Restart as required by Windows 7.
    You may have to disable and then enable the gfx card in Device Manager several times until you are left with VGA drivers only. ( Computer gurus suggest using a Driver Sweeper/Driver Cleaner program. But I do the driver cleaning chore myself. You may go to C:\Windows\System32\DRIVERS folder and manually delete Atikmpag.sys, Atikmdag.sys drivers. )
    Now you can re-install the ATI/AMD drivers that you have downloaded from hp suppport.
    Hope this helps.

  • Unable to support application while using data services

    I have a curve9220
    all time good product
    but unable to use any application while using data services 
    but i can browes from explore. 

    Yes, if you want to use them on mobile network you must have a BB data plan.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • No cache while using external database authenication

    Hello,
    i was successful in setting up the external database authentication and apply filters to groups
    while i am creating reports in answers, i.e. querying data from database...those queries are not logged in the cache.
    how do i see this solve this...............
    while using RPD authentication system, i know that queries are stored cached in NQQUERY FILE.
    THANKS
    RAKE

    hi,
    can you check whether Cache is turned ON in nqsconfig file.
    [ CACHE ]
    ENABLE     =     YES;
    // A comma separated list of <directory maxSize> pair(s)
    // e.g. DATA_STORAGE_PATHS = "d:\OracleBIData\nQSCache" 500 MB;
    DATA_STORAGE_PATHS     =     "D:\OracleBIData\cache" 500 MB;
    MAX_ROWS_PER_CACHE_ENTRY = 100000; // 0 is unlimited size
    MAX_CACHE_ENTRY_SIZE = 1 MB;
    MAX_CACHE_ENTRIES = 1000;
    POPULATE_AGGREGATE_ROLLUP_HITS = NO;
    USE_ADVANCED_HIT_DETECTION = NO;
    MAX_SUBEXPR_SEARCH_DEPTH = 7;
    // Cluster-aware cache
    // GLOBAL_CACHE_STORAGE_PATH = "<directory name>" SIZE;
    // MAX_GLOBAL_CACHE_ENTRIES = 1000;
    // CACHE_POLL_SECONDS = 300;
    // CLUSTER_AWARE_CACHE_LOGGING = NO;
    Thanks

  • Is it ok to keep Satellite U500 closed while using external monitor?

    Hello,
    I have a Satellite U500.
    When at home, I use an external monitor and a keyboard. So I would close the laptop while working at home.
    Can I do this, or would it damage the screen, or otherwise hinder the laptop from correctly ventilating in any way ?
    Thank you a lot for your answers.
    Thierry

    Hi mate
    Of course you can close the lid when the notebook is connected to the external monitor.
    I have a Satellite notebook as well and its connected to the external monitor.
    I have also an USB keyboard.
    I use external keyboard instead of internal notebook keyboard and lid is closed too
    So dont worried its ok!

  • Error while using External Table

    Hi Guru's,
    I am using external tables in my procedure and the code to create it will be dynamically built inside the procedure itself. I have tested it so many times and it works fine only. But suddenly now it is throwing some error and i was not able to figure out the problem.
    Additional Info:
    1. I have provided the full rights to the input directory.
    2. Working in Oracle 10g release 2
    3. Unix OS in server
    4. Error description:
    << UK_TRADINGDATA_LOAD >> ABEND : <<ABEND SYS-000 >> uncatched ORACLE-error : ORA-29913: error in executing ODCIEXTTABLEOPEN callout
    ORA-29400: data cartridge error
    KUP-04040: file EXTRACTION COMPLETED in EXT_UK_TRADINGDATA not found
               v_ac_sql:='CREATE TABLE VLDPROCESS'||gv_ac_schema_suffix||'.EXT_UK_TRAD_'||gv_ac_machineid ||'_'||gv_ac_retailer_id||'_ADHOC'||CHR(10)
                            ||'(  AC_RETAILER_ID       VARCHAR2(2 BYTE),'||CHR(10)
                            ||'AC_DEPARTMENT_CD     VARCHAR2(20 BYTE),'||CHR(10)
                            ||'NC_PERIOD_FROM       NUMBER,'||CHR(10)
                            ||'NC_PERIOD_TO       NUMBER'||CHR(10)   
                            ||')'||CHR(10)
                            ||'ORGANIZATION EXTERNAL'||CHR(10)
                            ||'(TYPE ORACLE_LOADER'||CHR(10)
                            ||'DEFAULT DIRECTORY EXT_UK_TRADINGDATA'||CHR(10)
                            ||'ACCESS PARAMETERS'||CHR(10)
                            ||'(RECORDS DELIMITED BY NEWLINE'||CHR(10)
                            ||'badfile     '''||v_ac_failed_files||'.bad'''||CHR(10)
                            ||'discardfile '''||v_ac_failed_files||'.dis'''||CHR(10)
                            ||'logfile     '''||v_ac_failed_files||'.log'''||CHR(10)
                            ||'FIELDS'||CHR(10)
                            ||'('||CHR(10)
                            ||'AC_RETAILER_ID   position( 1: 2) char( 2),'||CHR(10)
                            ||'AC_DEPARTMENT_CD position( 3:22) char(20),'||CHR(10)
                            ||'NC_PERIOD_FROM   position(23:29) char( 7),'||CHR(10)
                            ||'NC_PERIOD_TO     position(30:36) char( 7)'||CHR(10)     
                            ||')'||CHR(10)
                            ||')'||CHR(10)
                            ||'LOCATION ('''||v_ac_file_name ||''')'||CHR(10)
                            ||')'||CHR(10)
                            ||'REJECT LIMIT 100'||CHR(10)
                            ||'NOPARALLEL'||CHR(10)
                            ||'NOMONITORING';  
               EXECUTE IMMEDIATE v_ac_sql; Kindly help me!
    With Regards,
    VJ

    Sometimes when troubleshooting issues like this it is helpful to output the dynamic SQL generated to the screen or spool it to a text file. From there it's usually easy to determine where the problem lies.
    If you can provide that one of the forum members can figure it out.

Maybe you are looking for

  • Iweb comments issue!

    i have an iweb site and am using a third party code for comments as i do not have a MobileMe account for the built in comment system with iweb. and im having an issue... so i use the html snippet widget and all works fine until there are enough comme

  • FormCalc issues with Windows 7

    Hi, I am using FormCalc to check two date fields. The first one, the arrival date, should not be earlier than today's date. The second field, departure date, should not be earlier than the arrival date.  The FormCalc is in the Exit event of the date

  • How does share Internet to Window 7?, How to share Airport to Window 7?

    Hello Apple Forums, I recently have bought a MacBook Pro 15" and I have heard there is a feature of the Macbook acting as a hotspot provided a LAN with internet is connected. I have followed the "Sharing Internet" tutorial. System Preferences > Shari

  • Queues - how to ???

    hi, in my scenario an interface gets to xi and calls an BPM, after that the BPM calls an oracle DB thru JDBC using two individual interfaces. It is possible that for this two interfaces i can achived one specific queue to process them ??? I've alread

  • How do I apply the Lookout 6.0 fixes?

    Would it be possible for someone to give me step by step instructions for apllying the Lookout 6.0 fixes? Much appreciation!